*413*
*136*
*8MB*

*Spanish*
*Pages [758]*
*Year 2006*

- Author / Uploaded
- Jaynes E T

PROBABILITY THEORY THE LOGIC OF SCIENCE

PROBABILITY THEORY THE LOGIC OF SCIENCE E . T . Jaynes

edited by

G. Larry Bretthorst

Cambridge, New York, Melbourne, Madrid, Cape Town, Singapore, São Paulo Cambridge University Press The Edinburgh Building, Cambridge , United Kingdom Published in the United States by Cambridge University Press, New York www.cambridge.org Information on this title: www.cambridge.org/9780521592710 © E. T. Jaynes 2003 This book is in copyright. Subject to statutory exception and to the provision of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published in print format 2003 ISBN-13 ISBN-10

978-0-511-06589-7 eBook (NetLibrary) 0-511-06589-2 eBook (NetLibrary)

ISBN-13 978-0-521-59271-0 hardback ISBN-10 0-521-59271-2 hardback

Cambridge University Press has no responsibility for the persistence or accuracy of s for external or third-party internet websites referred to in this book, and does not guarantee that any content on such websites is, or will remain, accurate or appropriate.

Dedicated to the memory of Sir Harold Jeffreys, who saw the truth and preserved it.

Contents

Part I

Editor’s foreword Preface Principles and elementary applications 1 Plausible reasoning 1.1 Deductive and plausible reasoning 1.2 Analogies with physical theories 1.3 The thinking computer 1.4 Introducing the robot 1.5 Boolean algebra 1.6 Adequate sets of operations 1.7 The basic desiderata 1.8 Comments 1.8.1 Common language vs. formal logic 1.8.2 Nitpicking 2 The quantitative rules 2.1 The product rule 2.2 The sum rule 2.3 Qualitative properties 2.4 Numerical values 2.5 Notation and finite-sets policy 2.6 Comments 2.6.1 ‘Subjective’ vs. ‘objective’ 2.6.2 G¨odel’s theorem 2.6.3 Venn diagrams 2.6.4 The ‘Kolmogorov axioms’ 3 Elementary sampling theory 3.1 Sampling without replacement 3.2 Logic vs. propensity 3.3 Reasoning from less precise information 3.4 Expectations 3.5 Other forms and extensions vii

page xvii xix 3 3 6 7 8 9 12 17 19 21 23 24 24 30 35 37 43 44 44 45 47 49 51 52 60 64 66 68

viii

Contents

3.6 3.7 3.8

Probability as a mathematical tool The binomial distribution Sampling with replacement 3.8.1 Digression: a sermon on reality vs. models 3.9 Correction for correlations 3.10 Simplification 3.11 Comments 3.11.1 A look ahead 4 Elementary hypothesis testing 4.1 Prior probabilities 4.2 Testing binary hypotheses with binary data 4.3 Nonextensibility beyond the binary case 4.4 Multiple hypothesis testing 4.4.1 Digression on another derivation 4.5 Continuous probability distribution functions 4.6 Testing an infinite number of hypotheses 4.6.1 Historical digression 4.7 Simple and compound (or composite) hypotheses 4.8 Comments 4.8.1 Etymology 4.8.2 What have we accomplished? 5 Queer uses for probability theory 5.1 Extrasensory perception 5.2 Mrs Stewart’s telepathic powers 5.2.1 Digression on the normal approximation 5.2.2 Back to Mrs Stewart 5.3 Converging and diverging views 5.4 Visual perception – evolution into Bayesianity? 5.5 The discovery of Neptune 5.5.1 Digression on alternative hypotheses 5.5.2 Back to Newton 5.6 Horse racing and weather forecasting 5.6.1 Discussion 5.7 Paradoxes of intuition 5.8 Bayesian jurisprudence 5.9 Comments 5.9.1 What is queer? 6 Elementary parameter estimation 6.1 Inversion of the urn distributions 6.2 Both N and R unknown 6.3 Uniform prior 6.4 Predictive distributions

68 69 72 73 75 81 82 84 86 87 90 97 98 101 107 109 112 115 116 116 117 119 119 120 122 122 126 132 133 135 137 140 142 143 144 146 148 149 149 150 152 154

Contents

6.5 6.6 6.7 6.8 6.9

Truncated uniform priors A concave prior The binomial monkey prior Metamorphosis into continuous parameter estimation Estimation with a binomial sampling distribution 6.9.1 Digression on optional stopping 6.10 Compound estimation problems 6.11 A simple Bayesian estimate: quantitative prior information 6.11.1 From posterior distribution function to estimate 6.12 Effects of qualitative prior information 6.13 Choice of a prior 6.14 On with the calculation! 6.15 The Jeffreys prior 6.16 The point of it all 6.17 Interval estimation 6.18 Calculation of variance 6.19 Generalization and asymptotic forms 6.20 Rectangular sampling distribution 6.21 Small samples 6.22 Mathematical trickery 6.23 Comments 7 The central, Gaussian or normal distribution 7.1 The gravitating phenomenon 7.2 The Herschel–Maxwell derivation 7.3 The Gauss derivation 7.4 Historical importance of Gauss’s result 7.5 The Landon derivation 7.6 Why the ubiquitous use of Gaussian distributions? 7.7 Why the ubiquitous success? 7.8 What estimator should we use? 7.9 Error cancellation 7.10 The near irrelevance of sampling frequency distributions 7.11 The remarkable efficiency of information transfer 7.12 Other sampling distributions 7.13 Nuisance parameters as safety devices 7.14 More general properties 7.15 Convolution of Gaussians 7.16 The central limit theorem 7.17 Accuracy of computations 7.18 Galton’s discovery 7.19 Population dynamics and Darwinian evolution 7.20 Evolution of humming-birds and flowers

ix

157 158 160 163 163 166 167 168 172 177 178 179 181 183 186 186 188 190 192 193 195 198 199 200 202 203 205 207 210 211 213 215 216 218 219 220 221 222 224 227 229 231

x

Contents

7.21 7.22 7.23 7.24 7.25 7.26 7.27

Application to economics The great inequality of Jupiter and Saturn Resolution of distributions into Gaussians Hermite polynomial solutions Fourier transform relations There is hope after all Comments 7.27.1 Terminology again 8 Sufficiency, ancillarity, and all that 8.1 Sufficiency 8.2 Fisher sufficiency 8.2.1 Examples 8.2.2 The Blackwell–Rao theorem 8.3 Generalized sufficiency 8.4 Sufficiency plus nuisance parameters 8.5 The likelihood principle 8.6 Ancillarity 8.7 Generalized ancillary information 8.8 Asymptotic likelihood: Fisher information 8.9 Combining evidence from different sources 8.10 Pooling the data 8.10.1 Fine-grained propositions 8.11 Sam’s broken thermometer 8.12 Comments 8.12.1 The fallacy of sample re-use 8.12.2 A folk theorem 8.12.3 Effect of prior information 8.12.4 Clever tricks and gamesmanship 9 Repetitive experiments: probability and frequency 9.1 Physical experiments 9.2 The poorly informed robot 9.3 Induction 9.4 Are there general inductive rules? 9.5 Multiplicity factors 9.6 Partition function algorithms 9.6.1 Solution by inspection 9.7 Entropy algorithms 9.8 Another way of looking at it 9.9 Entropy maximization 9.10 Probability and frequency 9.11 Significance tests 9.11.1 Implied alternatives

233 234 235 236 238 239 240 240 243 243 245 246 247 248 249 250 253 254 256 257 260 261 262 264 264 266 267 267 270 271 274 276 277 280 281 282 285 289 290 292 293 296

Contents

9.12 9.13 9.14 9.15 9.16

Comparison of psi and chi-squared The chi-squared test Generalization Halley’s mortality table Comments 9.16.1 The irrationalists 9.16.2 Superstitions 10 Physics of ‘random experiments’ 10.1 An interesting correlation 10.2 Historical background 10.3 How to cheat at coin and die tossing 10.3.1 Experimental evidence 10.4 Bridge hands 10.5 General random experiments 10.6 Induction revisited 10.7 But what about quantum theory? 10.8 Mechanics under the clouds 10.9 More on coins and symmetry 10.10 Independence of tosses 10.11 The arrogance of the uninformed Part II Advanced applications 11 Discrete prior probabilities: the entropy principle 11.1 A new kind of prior information 2 11.2 Minimum pi 11.3 Entropy: Shannon’s theorem 11.4 The Wallis derivation 11.5 An example 11.6 Generalization: a more rigorous proof 11.7 Formal properties of maximum entropy distributions 11.8 Conceptual problems – frequency correspondence 11.9 Comments 12 Ignorance priors and transformation groups 12.1 What are we trying to do? 12.2 Ignorance priors 12.3 Continuous distributions 12.4 Transformation groups 12.4.1 Location and scale parameters 12.4.2 A Poisson rate 12.4.3 Unknown probability for success 12.4.4 Bertrand’s problem 12.5 Comments

xi

300 302 304 305 310 310 312 314 314 315 317 320 321 324 326 327 329 331 335 338 343 343 345 346 351 354 355 358 365 370 372 372 374 374 378 378 382 382 386 394

xii

Contents

13 Decision theory, historical background 13.1 Inference vs. decision 13.2 Daniel Bernoulli’s suggestion 13.3 The rationale of insurance 13.4 Entropy and utility 13.5 The honest weatherman 13.6 Reactions to Daniel Bernoulli and Laplace 13.7 Wald’s decision theory 13.8 Parameter estimation for minimum loss 13.9 Reformulation of the problem 13.10 Effect of varying loss functions 13.11 General decision theory 13.12 Comments 13.12.1 ‘Objectivity’ of decision theory 13.12.2 Loss functions in human society 13.12.3 A new look at the Jeffreys prior 13.12.4 Decision theory is not fundamental 13.12.5 Another dimension? 14 Simple applications of decision theory 14.1 Definitions and preliminaries 14.2 Sufficiency and information 14.3 Loss functions and criteria of optimum performance 14.4 A discrete example 14.5 How would our robot do it? 14.6 Historical remarks 14.6.1 The classical matched filter 14.7 The widget problem 14.7.1 Solution for Stage 2 14.7.2 Solution for Stage 3 14.7.3 Solution for Stage 4 14.8 Comments 15 Paradoxes of probability theory 15.1 How do paradoxes survive and grow? 15.2 Summing a series the easy way 15.3 Nonconglomerability 15.4 The tumbling tetrahedra 15.5 Solution for a finite number of tosses 15.6 Finite vs. countable additivity 15.7 The Borel–Kolmogorov paradox 15.8 The marginalization paradox 15.8.1 On to greater disasters

397 397 398 400 402 402 404 406 410 412 415 417 418 418 421 423 423 424 426 426 428 430 432 437 438 439 440 443 445 449 450 451 451 452 453 456 459 464 467 470 474

Contents

15.9

Discussion 15.9.1 The DSZ Example #5 15.9.2 Summary 15.10 A useful result after all? 15.11 How to mass-produce paradoxes 15.12 Comments 16 Orthodox methods: historical background 16.1 The early problems 16.2 Sociology of orthodox statistics 16.3 Ronald Fisher, Harold Jeffreys, and Jerzy Neyman 16.4 Pre-data and post-data considerations 16.5 The sampling distribution for an estimator 16.6 Pro-causal and anti-causal bias 16.7 What is real, the probability or the phenomenon? 16.8 Comments 16.8.1 Communication difficulties 17 Principles and pathology of orthodox statistics 17.1 Information loss 17.2 Unbiased estimators 17.3 Pathology of an unbiased estimate 17.4 The fundamental inequality of the sampling variance 17.5 Periodicity: the weather in Central Park 17.5.1 The folly of pre-filtering data 17.6 A Bayesian analysis 17.7 The folly of randomization 17.8 Fisher: common sense at Rothamsted 17.8.1 The Bayesian safety device 17.9 Missing data 17.10 Trend and seasonality in time series 17.10.1 Orthodox methods 17.10.2 The Bayesian method 17.10.3 Comparison of Bayesian and orthodox estimates 17.10.4 An improved orthodox estimate 17.10.5 The orthodox criterion of performance 17.11 The general case 17.12 Comments 18 The A p distribution and rule of succession 18.1 Memory storage for old robots 18.2 Relevance 18.3 A surprising consequence 18.4 Outer and inner robots

xiii

478 480 483 484 485 486 490 490 492 493 499 500 503 505 506 507 509 510 511 516 518 520 521 527 531 532 532 533 534 535 536 540 541 544 545 550 553 553 555 557 559

xiv

Contents

18.5 18.6 18.7 18.8 18.9 18.10 18.11

An application Laplace’s rule of succession Jeffreys’ objection Bass or carp? So where does this leave the rule? Generalization Confirmation and weight of evidence 18.11.1 Is indifference based on knowledge or ignorance? 18.12 Carnap’s inductive methods 18.13 Probability and frequency in exchangeable sequences 18.14 Prediction of frequencies 18.15 One-dimensional neutron multiplication 18.15.1 The frequentist solution 18.15.2 The Laplace solution 18.16 The de Finetti theorem 18.17 Comments 19 Physical measurements 19.1 Reduction of equations of condition 19.2 Reformulation as a decision problem 19.2.1 Sermon on Gaussian error distributions 19.3 The underdetermined case: K is singular 19.4 The overdetermined case: K can be made nonsingular 19.5 Numerical evaluation of the result 19.6 Accuracy of the estimates 19.7 Comments 19.7.1 A paradox 20 Model comparison 20.1 Formulation of the problem 20.2 The fair judge and the cruel realist 20.2.1 Parameters known in advance 20.2.2 Parameters unknown 20.3 But where is the idea of simplicity? 20.4 An example: linear response models 20.4.1 Digression: the old sermon still another time 20.5 Comments 20.5.1 Final causes 21 Outliers and robustness 21.1 The experimenter’s dilemma 21.2 Robustness 21.3 The two-model model 21.4 Exchangeable selection 21.5 The general Bayesian solution

561 563 566 567 568 568 571 573 574 576 576 579 579 581 586 588 589 589 592 592 594 595 596 597 599 599 601 602 603 604 604 605 607 608 613 614 615 615 617 619 620 622

Contents

21.6 Pure outliers 21.7 One receding datum 22 Introduction to communication theory 22.1 Origins of the theory 22.2 The noiseless channel 22.3 The information source 22.4 Does the English language have statistical properties? 22.5 Optimum encoding: letter frequencies known 22.6 Better encoding from knowledge of digram frequencies 22.7 Relation to a stochastic model 22.8 The noisy channel Appendix A Other approaches to probability theory A.1 The Kolmogorov system of probability A.2 The de Finetti system of probability A.3 Comparative probability A.4 Holdouts against universal comparability A.5 Speculations about lattice theories Appendix B Mathematical formalities and style B.1 Notation and logical hierarchy B.2 Our ‘cautious approach’ policy B.3 Willy Feller on measure theory B.4 Kronecker vs. Weierstrasz B.5 What is a legitimate mathematical function? B.5.1 Delta-functions B.5.2 Nondifferentiable functions B.5.3 Bogus nondifferentiable functions B.6 Counting infinite sets? B.7 The Hausdorff sphere paradox and mathematical diseases B.8 What am I supposed to publish? B.9 Mathematical courtesy Appendix C Convolutions and cumulants C.1 Relation of cumulants and moments C.2 Examples References Bibliography Author index Subject index

xv

624 625 627 627 628 634 636 638 641 644 648 651 651 655 656 658 659 661 661 662 663 665 666 668 668 669 671 672 674 675 677 679 680 683 705 721 724

Editor’s foreword

E. T. Jaynes died April 30, 1998. Before his death he asked me to finish and publish his book on probability theory. I struggled with this for some time, because there is no doubt in my mind that Jaynes wanted this book finished. Unfortunately, most of the later chapters, Jaynes’ intended volume 2 on applications, were either missing or incomplete, and some of the early chapters also had missing pieces. I could have written these latter chapters and filled in the missing pieces, but if I did so, the work would no longer be Jaynes’; rather, it would be a Jaynes–Bretthorst hybrid with no way to tell which material came from which author. In the end, I decided the missing chapters would have to stay missing – the work would remain Jaynes’. There were a number of missing pieces of varying length that Jaynes had marked by inserting the phrase ‘much more coming’. I could have left these comments in the text, but they were ugly and they made the book look very incomplete. Jaynes intended this book to serve as both a reference and a text book. Consequently, there are question boxes (Exercises) scattered throughout most chapters. In the end, I decided to replace the ‘much more coming’ comments by introducing ‘Editor’s’ Exercises. If you answer these questions, you will have filled in the missing material. Jaynes wanted to include a series of computer programs that implemented some of the calculations in the book. I had originally intended to include these programs. But, as time went on, it became increasingly obvious that many of the programs were not available, and the ones that were were written in a particularly obscure form of basic (it was the programs that were obscure, not the basic). Consequently, I removed the references to these programs and, where necessary, inserted a few sentences to direct people to the necessary software tools to implement the calculations. Numerous references were missing and had to be supplied. Usually the information available, a last name and date, was sufficient to find one or more probable references. When there were several good candidates, and I was unable to determine which Jaynes intended, I included multiple references and modified the citation. Sometimes the information was so vague that no good candidates were available. Fortunately, I was able to remove the citation with no detrimental effect. To enable readers to distinguish between cited works and other published sources, Jaynes’ original annotated bibliography has been split into two sections: a Reference list and a Bibliography. xvii

xviii

Editor’s foreword

Finally, while I am the most obvious person who has worked on getting this book into publication, I am not the only person to do so. Some of Jaynes’ closest friends have assisted me in completing this work. These include Tom Grandy, Ray Smith, Tom Loredo, Myron Tribus and John Skilling, and I would like to thank them for their assistance. I would also like to thank Joe Ackerman for allowing me to take the time necessary to get this work published.

G. Larry Bretthorst

Preface

The following material is addressed to readers who are already familiar with applied mathematics, at the advanced undergraduate level or preferably higher, and with some field, such as physics, chemistry, biology, geology, medicine, economics, sociology, engineering, operations research, etc., where inference is needed.1 A previous acquaintance with probability and statistics is not necessary; indeed, a certain amount of innocence in this area may be desirable, because there will be less to unlearn. We are concerned with probability theory and all of its conventional mathematics, but now viewed in a wider context than that of the standard textbooks. Every chapter after the first has ‘new’ (i.e. not previously published) results that we think will be found interesting and useful. Many of our applications lie outside the scope of conventional probability theory as currently taught. But we think that the results will speak for themselves, and that something like the theory expounded here will become the conventional probability theory of the future. History The present form of this work is the result of an evolutionary growth over many years. My interest in probability theory was stimulated first by reading the work of Harold Jeffreys (1939) and realizing that his viewpoint makes all the problems of theoretical physics appear in a very different light. But then, in quick succession, discovery of the work of R. T. Cox (1946), Shannon (1948) and P´olya (1954) opened up new worlds of thought, whose exploration has occupied my mind for some 40 years. In this much larger and permanent world of rational thinking in general, the current problems of theoretical physics appeared as only details of temporary interest. The actual writing started as notes for a series of lectures given at Stanford University in 1956, expounding the then new and exciting work of George P´olya on ‘Mathematics and Plausible Reasoning’. He dissected our intuitive ‘common sense’ into a set of elementary qualitative desiderata and showed that mathematicians had been using them all along to 1

By ‘inference’ we mean simply: deductive reasoning whenever enough information is at hand to permit it; inductive or plausible reasoning when – as is almost invariably the case in real problems – the necessary information is not available. But if a problem can be solved by deductive reasoning, probability theory is not needed for it; thus our topic is the optimal processing of incomplete information.

xix

xx

Preface

guide the early stages of discovery, which necessarily precede the finding of a rigorous proof. The results were much like those of James Bernoulli’s Art of Conjecture (1713), developed analytically by Laplace in the late 18th century; but P´olya thought the resemblance to be only qualitative. However, P´olya demonstrated this qualitative agreement in such complete, exhaustive detail as to suggest that there must be more to it. Fortunately, the consistency theorems of R. T. Cox were enough to clinch matters; when one added P´olya’s qualitative conditions to them the result was a proof that, if degrees of plausibility are represented by real numbers, then there is a uniquely determined set of quantitative rules for conducting inference. That is, any other rules whose results conflict with them will necessarily violate an elementary – and nearly inescapable – desideratum of rationality or consistency. But the final result was just the standard rules of probability theory, given already by Daniel Bernoulli and Laplace; so why all the fuss? The important new feature was that these rules were now seen as uniquely valid principles of logic in general, making no reference to ‘chance’ or ‘random variables’; so their range of application is vastly greater than had been supposed in the conventional probability theory that was developed in the early 20th century. As a result, the imaginary distinction between ‘probability theory’ and ‘statistical inference’ disappears, and the field achieves not only logical unity and simplicity, but far greater technical power and flexibility in applications. In the writer’s lectures, the emphasis was therefore on the quantitative formulation of P´olya’s viewpoint, so it could be used for general problems of scientific inference, almost all of which arise out of incomplete information rather than ‘randomness’. Some personal reminiscences about George P´olya and this start of the work are in Chapter 5. Once the development of applications started, the work of Harold Jeffreys, who had seen so much of it intuitively and seemed to anticipate every problem I would encounter, became again the central focus of attention. My debt to him is only partially indicated by the dedication of this book to his memory. Further comments about his work and its influence on mine are scattered about in several chapters. In the years 1957–1970 the lectures were repeated, with steadily increasing content, at many other universities and research laboratories.2 In this growth it became clear gradually that the outstanding difficulties of conventional ‘statistical inference’ are easily understood and overcome. But the rules which now took their place were quite subtle conceptually, and it required some deep thinking to see how to apply them correctly. Past difficulties, which had led to rejection of Laplace’s work, were seen finally as only misapplications, arising usually from failure to define the problem unambiguously or to appreciate the cogency of seemingly trivial side information, and easy to correct once this is recognized. The various relations between our ‘extended logic’ approach and the usual ‘random variable’ one appear in almost every chapter, in many different forms. 2

Some of the material in the early chapters was issued in 1958 by the Socony-Mobil Oil Company as Number 4 in their series ‘Colloquium Lectures in Pure and Applied Science’.

Preface

xxi

Eventually, the material grew to far more than could be presented in a short series of lectures, and the work evolved out of the pedagogical phase; with the clearing up of old difficulties accomplished, we found ourselves in possession of a powerful tool for dealing with new problems. Since about 1970 the accretion has continued at the same pace, but fed instead by the research activity of the writer and his colleagues. We hope that the final result has retained enough of its hybrid origins to be usable either as a textbook or as a reference work; indeed, several generations of students have carried away earlier versions of our notes, and in turn taught it to their students. In view of the above, we repeat the sentence that Charles Darwin wrote in the Introduction to his Origin of Species: ‘I hope that I may be excused for entering on these personal details, as I give them to show that I have not been hasty in coming to a decision.’ But it might be thought that work done 30 years ago would be obsolete today. Fortunately, the work of Jeffreys, P´olya and Cox was of a fundamental, timeless character whose truth does not change and whose importance grows with time. Their perception about the nature of inference, which was merely curious 30 years ago, is very important in a half-dozen different areas of science today; and it will be crucially important in all areas 100 years hence.

Foundations From many years of experience with its applications in hundreds of real problems, our views on the foundations of probability theory have evolved into something quite complex, which cannot be described in any such simplistic terms as ‘pro-this’ or ‘anti-that’. For example, our system of probability could hardly be more different from that of Kolmogorov, in style, philosophy, and purpose. What we consider to be fully half of probability theory as it is needed in current applications – the principles for assigning probabilities by logical analysis of incomplete information – is not present at all in the Kolmogorov system. Yet, when all is said and done, we find ourselves, to our own surprise, in agreement with Kolmogorov and in disagreement with his critics, on nearly all technical issues. As noted in Appendix A, each of his axioms turns out to be, for all practical purposes, derivable from the P´olya–Cox desiderata of rationality and consistency. In short, we regard our system of probability as not contradicting Kolmogorov’s; but rather seeking a deeper logical foundation that permits its extension in the directions that are needed for modern applications. In this endeavor, many problems have been solved, and those still unsolved appear where we should naturally expect them: in breaking into new ground. As another example, it appears at first glance to everyone that we are in very close agreement with the de Finetti system of probability. Indeed, the writer believed this for some time. Yet when all is said and done we find, to our own surprise, that little more than a loose philosophical agreement remains; on many technical issues we disagree strongly with de Finetti. It appears to us that his way of treating infinite sets has opened up a Pandora’s box of useless and unnecessary paradoxes; nonconglomerability and finite additivity are examples discussed in Chapter 15.

xxii

Preface

Infinite-set paradoxing has become a morbid infection that is today spreading in a way that threatens the very life of probability theory, and it requires immediate surgical removal. In our system, after this surgery, such paradoxes are avoided automatically; they cannot arise from correct application of our basic rules, because those rules admit only finite sets and infinite sets that arise as well-defined and well-behaved limits of finite sets. The paradoxing was caused by (1) jumping directly into an infinite set without specifying any limiting process to define its properties; and then (2) asking questions whose answers depend on how the limit was approached. For example, the question: ‘What is the probability that an integer is even?’ can have any answer we please in (0, 1), depending on what limiting process is used to define the ‘set of all integers’ (just as a conditionally convergent series can be made to converge to any number we please, depending on the order in which we arrange the terms). In our view, an infinite set cannot be said to possess any ‘existence’ and mathematical properties at all – at least, in probability theory – until we have specified the limiting process that is to generate it from a finite set. In other words, we sail under the banner of Gauss, Kronecker, and Poincar´e rather than Cantor, Hilbert, and Bourbaki. We hope that readers who are shocked by this will study the indictment of Bourbakism by the mathematician Morris Kline (1980), and then bear with us long enough to see the advantages of our approach. Examples appear in almost every chapter. Comparisons For many years, there has been controversy over ‘frequentist’ versus ‘Bayesian’ methods of inference, in which the writer has been an outspoken partisan on the Bayesian side. The record of this up to 1981 is given in an earlier book (Jaynes, 1983). In these old works there was a strong tendency, on both sides, to argue on the level of philosophy or ideology. We can now hold ourselves somewhat aloof from this, because, thanks to recent work, there is no longer any need to appeal to such arguments. We are now in possession of proven theorems and masses of worked-out numerical examples. As a result, the superiority of Bayesian methods is now a thoroughly demonstrated fact in a hundred different areas. One can argue with a philosophy; it is not so easy to argue with a computer printout, which says to us: ‘Independently of all your philosophy, here are the facts of actual performance.’ We point this out in some detail whenever there is a substantial difference in the final results. Thus we continue to argue vigorously for the Bayesian methods; but we ask the reader to note that our arguments now proceed by citing facts rather than proclaiming a philosophical or ideological position. However, neither the Bayesian nor the frequentist approach is universally applicable, so in the present, more general, work we take a broader view of things. Our theme is simply: probability theory as extended logic. The ‘new’ perception amounts to the recognition that the mathematical rules of probability theory are not merely rules for calculating frequencies of ‘random variables’; they are also the unique consistent rules for conducting inference (i.e. plausible reasoning) of any kind, and we shall apply them in full generality to that end.

Preface

xxiii

It is true that all ‘Bayesian’ calculations are included automatically as particular cases of our rules; but so are all ‘frequentist’ calculations. Nevertheless, our basic rules are broader than either of these, and in many applications our calculations do not fit into either category. To explain the situation as we see it presently: The traditional ‘frequentist’ methods which use only sampling distributions are usable and useful in many particularly simple, idealized problems; however, they represent the most proscribed special cases of probability theory, because they presuppose conditions (independent repetitions of a ‘random experiment’ but no relevant prior information) that are hardly ever met in real problems. This approach is quite inadequate for the current needs of science. In addition, frequentist methods provide no technical means to eliminate nuisance parameters or to take prior information into account, no way even to use all the information in the data when sufficient or ancillary statistics do not exist. Lacking the necessary theoretical principles, they force one to ‘choose a statistic’ from intuition rather than from probability theory, and then to invent ad hoc devices (such as unbiased estimators, confidence intervals, tail-area significance tests) not contained in the rules of probability theory. Each of these is usable within the small domain for which it was invented but, as Cox’s theorems guarantee, such arbitrary devices always generate inconsistencies or absurd results when applied to extreme cases; we shall see dozens of examples. All of these defects are corrected by use of Bayesian methods, which are adequate for what we might call ‘well-developed’ problems of inference. As Harold Jeffreys demonstrated, they have a superb analytical apparatus, able to deal effortlessly with the technical problems on which frequentist methods fail. They determine the optimal estimators and algorithms automatically, while taking into account prior information and making proper allowance for nuisance parameters, and, being exact, they do not break down – but continue to yield reasonable results – in extreme cases. Therefore they enable us to solve problems of far greater complexity than can be discussed at all in frequentist terms. One of our main purposes is to show how all this capability was contained already in the simple product and sum rules of probability theory interpreted as extended logic, with no need for – indeed, no room for – any ad hoc devices. Before Bayesian methods can be used, a problem must be developed beyond the ‘exploratory phase’ to the point where it has enough structure to determine all the needed apparatus (a model, sample space, hypothesis space, prior probabilities, sampling distribution). Almost all scientific problems pass through an initial exploratory phase in which we have need for inference, but the frequentist assumptions are invalid and the Bayesian apparatus is not yet available. Indeed, some of them never evolve out of the exploratory phase. Problems at this level call for more primitive means of assigning probabilities directly out of our incomplete information. For this purpose, the Principle of maximum entropy has at present the clearest theoretical justification and is the most highly developed computationally, with an analytical apparatus as powerful and versatile as the Bayesian one. To apply it we must define a sample space, but do not need any model or sampling distribution. In effect, entropy maximization creates a model for us out of our data, which proves to be optimal by so many different

xxiv

Preface

criteria3 that it is hard to imagine circumstances where one would not want to use it in a problem where we have a sample space but no model. Bayesian and maximum entropy methods differ in another respect. Both procedures yield the optimal inferences from the information that went into them, but we may choose a model for Bayesian analysis; this amounts to expressing some prior knowledge – or some working hypothesis – about the phenomenon being observed. Usually, such hypotheses extend beyond what is directly observable in the data, and in that sense we might say that Bayesian methods are – or at least may be – speculative. If the extra hypotheses are true, then we expect that the Bayesian results will improve on maximum entropy; if they are false, the Bayesian inferences will likely be worse. On the other hand, maximum entropy is a nonspeculative procedure, in the sense that it invokes no hypotheses beyond the sample space and the evidence that is in the available data. Thus it predicts only observable facts (functions of future or past observations) rather than values of parameters which may exist only in our imagination. It is just for that reason that maximum entropy is the appropriate (safest) tool when we have very little knowledge beyond the raw data; it protects us against drawing conclusions not warranted by the data. But when the information is extremely vague, it may be difficult to define any appropriate sample space, and one may wonder whether still more primitive principles than maximum entropy can be found. There is room for much new creative thought here. For the present, there are many important and highly nontrivial applications where Maximum Entropy is the only tool we need. Part 2 of this work considers them in detail; usually, they require more technical knowledge of the subject-matter area than do the more general applications studied in Part 1. All of presently known statistical mechanics, for example, is included in this, as are the highly successful Maximum Entropy spectrum analysis and image reconstruction algorithms in current use. However, we think that in the future the latter two applications will evolve into the Bayesian phase, as we become more aware of the appropriate models and hypothesis spaces which enable us to incorporate more prior information. We are conscious of having so many theoretical points to explain that we fail to present as many practical worked-out numerical examples as we should. Fortunately, three recent books largely make up this deficiency, and should be considered as adjuncts to the present work: Bayesian Spectrum Analysis and Parameter Estimation (Bretthorst, 1988), Maximum Entropy in Action (Buck and Macaulay, 1991), and Data Analysis – A Bayesian Tutorial (Sivia, 1996), are written from a viewpoint essentially identical to ours and present a wealth of real problems carried through to numerical solutions. Of course, these works do not contain nearly as much theoretical explanation as does the present one. Also, the Proceedings 3

These concern efficient information handling; for example, (1) the model created is the simplest one that captures all the information in the constraints (Chapter 11); (2) it is the unique model for which the constraints would have been sufficient statistics (Chapter 8); (3) if viewed as constructing a sampling distribution for subsequent Bayesian inference from new data D, the only property of the measurement errors in D that are used in that subsequent inference are the ones about which that sampling distribution contained some definite prior information (Chapter 7). Thus the formalism automatically takes into account all the information we have, but avoids assuming information that we do not have. This contrasts sharply with orthodox methods, where one does not think in terms of information at all, and in general violates both of these desiderata.

Preface

xxv

volumes of the various annual MAXENT workshops since 1981 consider a great variety of useful applications. Mental activity As one would expect already from P´olya’s examples, probability theory as extended logic reproduces many aspects of human mental activity, sometimes in surprising and even disturbing detail. In Chapter 5 we find our equations exhibiting the phenomenon of a person who tells the truth and is not believed, even though the disbelievers are reasoning consistently. The theory explains why and under what circumstances this will happen. The equations also reproduce a more complicated phenomenon, divergence of opinions. One might expect that open discussion of public issues would tend to bring about a general consensus. On the contrary, we observe repeatedly that when some controversial issue has been discussed vigorously for a few years, society becomes polarized into two opposite extreme camps; it is almost impossible to find anyone who retains a moderate view. Probability theory as logic shows how two persons, given the same information, may have their opinions driven in opposite directions by it, and what must be done to avoid this. In such respects, it is clear that probability theory is telling us something about the way our own minds operate when we form intuitive judgments, of which we may not have been consciously aware. Some may feel uncomfortable at these revelations; others may see in them useful tools for psychological, sociological, or legal research. What is ‘safe’? We are not concerned here only with abstract issues of mathematics and logic. One of the main practical messages of this work is the great effect of prior information on the conclusions that one should draw from a given data set. Currently, much discussed issues, such as environmental hazards or the toxicity of a food additive, cannot be judged rationally if one looks only at the current data and ignores the prior information that scientists have about the phenomenon. This can lead one to overestimate or underestimate the danger. A common error, when judging the effects of radioactivity or the toxicity of some substance, is to assume a linear response model without threshold (i.e. without a dose rate below which there is no ill effect). Presumably there is no threshold effect for cumulative poisons like heavy metal ions (mercury, lead), which are eliminated only very slowly, if at all. But for virtually every organic substance (such as saccharin or cyclamates), the existence of a finite metabolic rate means that there must exist a finite threshold dose rate, below which the substance is decomposed, eliminated, or chemically altered so rapidly that it causes no ill effects. If this were not true, the human race could never have survived to the present time, in view of all the things we have been eating. Indeed, every mouthful of food you and I have ever taken contained many billions of kinds of complex molecules whose structure and physiological effects have never been determined – and many millions of which would be toxic or fatal in large doses. We cannot

xxvi

Preface

doubt that we are daily ingesting thousands of substances that are far more dangerous than saccharin – but in amounts that are safe, because they are far below the various thresholds of toxicity. At present, there are hardly any substances, except some common drugs, for which we actually know the threshold. Therefore, the goal of inference in this field should be to estimate not only the slope of the response curve, but, far more importantly, to decide whether there is evidence for a threshold; and, if there is, to estimate its magnitude (the ‘maximum safe dose’). For example, to tell us that a sugar substitute can produce a barely detectable incidence of cancer in doses 1000 times greater than would ever be encountered in practice, is hardly an argument against using the substitute; indeed, the fact that it is necessary to go to kilodoses in order to detect any ill effects at all, is rather conclusive evidence, not of the danger, but of the safety, of a tested substance. A similar overdose of sugar would be far more dangerous, leading not to barely detectable harmful effects, but to sure, immediate death by diabetic coma; yet nobody has proposed to ban the use of sugar in food. Kilodose effects are irrelevant because we do not take kilodoses; in the case of a sugar substitute the important question is: What are the threshold doses for toxicity of a sugar substitute and for sugar, compared with the normal doses? If that of a sugar substitute is higher, then the rational conclusion would be that the substitute is actually safer than sugar, as a food ingredient. To analyze one’s data in terms of a model which does not allow even the possibility of a threshold effect is to prejudge the issue in a way that can lead to false conclusions, however good the data. If we hope to detect any phenomenon, we must use a model that at least allows the possibility that it may exist. We emphasize this in the Preface because false conclusions of just this kind are now not only causing major economic waste, but also creating unnecessary dangers to public health and safety. Society has only finite resources to deal with such problems, so any effort expended on imaginary dangers means that real dangers are going unattended. Even worse, the error is incorrectible by the currently most used data analysis procedures; a false premise built into a model which is never questioned cannot be removed by any amount of new data. Use of models which correctly represent the prior information that scientists have about the mechanism at work can prevent such folly in the future. Such considerations are not the only reasons why prior information is essential in inference; the progress of science itself is at stake. To see this, note a corollary to the preceding paragraph: that new data that we insist on analyzing in terms of old ideas (that is, old models which are not questioned) cannot lead us out of the old ideas. However many data we record and analyze, we may just keep repeating the same old errors, missing the same crucially important things that the experiment was competent to find. That is what ignoring prior information can do to us; no amount of analyzing coin tossing data by a stochastic model could have led us to the discovery of Newtonian mechanics, which alone determines those data. Old data, when seen in the light of new ideas, can give us an entirely new insight into a phenomenon; we have an impressive recent example of this in the Bayesian spectrum analysis of nuclear magnetic resonance data, which enables us to make accurate quantitative determinations of phenomena which were not accessible to observation at all with the

Preface

xxvii

previously used data analysis by Fourier transforms. When a data set is mutilated (or, to use the common euphemism, ‘filtered’) by processing according to false assumptions, important information in it may be destroyed irreversibly. As some have recognized, this is happening constantly from orthodox methods of detrending or seasonal adjustment in econometrics. However, old data sets, if preserved unmutilated by old assumptions, may have a new lease on life when our prior information advances. Style of presentation In Part 1, expounding principles and elementary applications, most chapters start with several pages of verbal discussion of the nature of the problem. Here we try to explain the constructive ways of looking at it, and the logical pitfalls responsible for past errors. Only then do we turn to the mathematics, solving a few of the problems of the genre to the point where the reader may carry it on by straightforward mathematical generalization. In Part 2, expounding more advanced applications, we can concentrate from the start on the mathematics. The writer has learned from much experience that this primary emphasis on the logic of the problem, rather than the mathematics, is necessary in the early stages. For modern students, the mathematics is the easy part; once a problem has been reduced to a definite mathematical exercise, most students can solve it effortlessly and extend it endlessly, without further help from any book or teacher. It is in the conceptual matters (how to make the initial connection between the real-world problem and the abstract mathematics) that they are perplexed and unsure how to proceed. Recent history demonstrates that anyone foolhardy enough to describe his own work as ‘rigorous’ is headed for a fall. Therefore, we shall claim only that we do not knowingly give erroneous arguments. We are conscious also of writing for a large and varied audience, for most of whom clarity of meaning is more important than ‘rigor’ in the narrow mathematical sense. There are two more, even stronger, reasons for placing our primary emphasis on logic and clarity. Firstly, no argument is stronger than the premises that go into it, and, as Harold Jeffreys noted, those who lay the greatest stress on mathematical rigor are just the ones who, lacking a sure sense of the real world, tie their arguments to unrealistic premises and thus destroy their relevance. Jeffreys likened this to trying to strengthen a building by anchoring steel beams into plaster. An argument which makes it clear intuitively why a result is correct is actually more trustworthy, and more likely of a permanent place in science, than is one that makes a great overt show of mathematical rigor unaccompanied by understanding. Secondly, we have to recognize that there are no really trustworthy standards of rigor in a mathematics that has embraced the theory of infinite sets. Morris Kline (1980, p. 351) came close to the Jeffreys simile: ‘Should one design a bridge using theory involving infinite sets or the axiom of choice? Might not the bridge collapse?’ The only real rigor we have today is in the operations of elementary arithmetic on finite sets of finite integers, and our own bridge will be safest from collapse if we keep this in mind.

xxviii

Preface

Of course, it is essential that we follow this ‘finite sets’ policy whenever it matters for our results; but we do not propose to become fanatical about it. In particular, the arts of computation and approximation are on a different level than that of basic principle; and so once a result is derived from strict application of the rules, we allow ourselves to use any convenient analytical methods for evaluation or approximation (such as replacing a sum by an integral) without feeling obliged to show how to generate an uncountable set as the limit of a finite one. We impose on ourselves a far stricter adherence to the mathematical rules of probability theory than was ever exhibited in the ‘orthodox’ statistical literature, in which authors repeatedly invoke the aforementioned intuitive ad hoc devices to do, arbitrarily and imperfectly, what the rules of probability theory would have done for them uniquely and optimally. It is just this strict adherence that enables us to avoid the artificial paradoxes and contradictions of orthodox statistics, as described in Chapters 15 and 17. Equally important, this policy often simplifies the computations in two ways: (i) the problem of determining the sampling distribution of a ‘statistic’ is eliminated, and the evidence of the data is displayed fully in the likelihood function, which can be written down immediately; and (ii) one can eliminate nuisance parameters at the beginning of a calculation, thus reducing the dimensionality of a search algorithm. If there are several parameters in a problem, this can mean orders of magnitude reduction in computation over what would be needed with a least squares or maximum likelihood algorithm. The Bayesian computer programs of Bretthorst (1988) demonstrate these advantages impressively, leading in some cases to major improvements in the ability to extract information from data, over previously used methods. But this has barely scratched the surface of what can be done with sophisticated Bayesian models. We expect a great proliferation of this field in the near future. A scientist who has learned how to use probability theory directly as extended logic has a great advantage in power and versatility over one who has learned only a collection of unrelated ad hoc devices. As the complexity of our problems increases, so does this relative advantage. Therefore we think that, in the future, workers in all the quantitative sciences will be obliged, as a matter of practical necessity, to use probability theory in the manner expounded here. This trend is already well under way in several fields, ranging from econometrics to astronomy to magnetic resonance spectroscopy; but, to make progress in a new area, it is necessary to develop a healthy disrespect for tradition and authority, which have retarded progress throughout the 20th century. Finally, some readers should be warned not to look for hidden subtleties of meaning which are not present. We shall, of course, explain and use all the standard technical jargon of probability and statistics – because that is our topic. But, although our concern with the nature of logical inference leads us to discuss many of the same issues, our language differs greatly from the stilted jargon of logicians and philosophers. There are no linguistic tricks, and there is no ‘meta-language’ gobbledygook; only plain English. We think that this will convey our message clearly enough to anyone who seriously wants to understand it. In any event, we feel sure that no further clarity would be achieved by taking the first few steps down that infinite regress that starts with: ‘What do you mean by “exists”?’

Preface

xxix

Acknowledgments In addition to the inspiration received from the writings of Jeffreys, Cox, P´olya, and Shannon, I have profited by interaction with some 300 former students, who have diligently caught my errors and forced me to think more carefully about many issues. Also, over the years, my thinking has been influenced by discussions with many colleagues; to list a few (in the reverse alphabetical order preferred by some): Arnold Zellner, Eugene Wigner, George Uhlenbeck, John Tukey, William Sudderth, Stephen Stigler, Ray Smith, John Skilling, Jimmie Savage, Carlos Rodriguez, Lincoln Moses, Elliott Montroll, Paul Meier, Dennis Lindley, David Lane, Mark Kac, Harold Jeffreys, Bruce Hill, Mike Hardy, Stephen Gull, Tom Grandy, Jack Good, Seymour Geisser, Anthony Garrett, Fritz Fr¨ohner, Willy Feller, Anthony Edwards, Morrie de Groot, Phil Dawid, Jerome Cornfield, John Parker Burg, David Blackwell, and George Barnard. While I have not agreed with all of the great variety of things they told me, it has all been taken into account in one way or another in the following pages. Even when we ended in disagreement on some issue, I believe that our frank private discussions have enabled me to avoid misrepresenting their positions, while clarifying my own thinking; I thank them for their patience.

E. T. Jaynes July, 1996

Part 1 Principles and elementary applications

1 Plausible reasoning

The actual science of logic is conversant at present only with things either certain, impossible, or entirely doubtful, none of which (fortunately) we have to reason on. Therefore the true logic for this world is the calculus of Probabilities, which takes account of the magnitude of the probability which is, or ought to be, in a reasonable man’s mind. James Clerk Maxwell (1850) Suppose some dark night a policeman walks down a street, apparently deserted. Suddenly he hears a burglar alarm, looks across the street, and sees a jewelry store with a broken window. Then a gentleman wearing a mask comes crawling out through the broken window, carrying a bag which turns out to be full of expensive jewelry. The policeman doesn’t hesitate at all in deciding that this gentleman is dishonest. But by what reasoning process does he arrive at this conclusion? Let us first take a leisurely look at the general nature of such problems.

1.1 Deductive and plausible reasoning A moment’s thought makes it clear that our policeman’s conclusion was not a logical deduction from the evidence; for there may have been a perfectly innocent explanation for everything. It might be, for example, that this gentleman was the owner of the jewelry store and he was coming home from a masquerade party, and didn’t have the key with him. However, just as he walked by his store, a passing truck threw a stone through the window, and he was only protecting his own property. Now, while the policeman’s reasoning process was not logical deduction, we will grant that it had a certain degree of validity. The evidence did not make the gentleman’s dishonesty certain, but it did make it extremely plausible. This is an example of a kind of reasoning in which we have all become more or less proficient, necessarily, long before studying mathematical theories. We are hardly able to get through one waking hour without facing some situation (e.g. will it rain or won’t it?) where we do not have enough information to permit deductive reasoning; but still we must decide immediately what to do. In spite of its familiarity, the formation of plausible conclusions is a very subtle process. Although history records discussions of it extending over 24 centuries, probably nobody has 3

4

Part 1 Principles and elementary applications

ever produced an analysis of the process which anyone else finds completely satisfactory. In this work we will be able to report some useful and encouraging new progress, in which conflicting intuitive judgments are replaced by definite theorems, and ad hoc procedures are replaced by rules that are determined uniquely by some very elementary – and nearly inescapable – criteria of rationality. All discussions of these questions start by giving examples of the contrast between deductive reasoning and plausible reasoning. As is generally credited to the Organon of Aristotle (fourth century bc)1 deductive reasoning (apodeixis) can be analyzed ultimately into the repeated application of two strong syllogisms: if A is true, then B is true A is true

(1.1)

therefore, B is true, and its inverse: if A is true, then B is true B is false

(1.2)

therefore, A is false. This is the kind of reasoning we would like to use all the time; but, as noted, in almost all the situations confronting us we do not have the right kind of information to allow this kind of reasoning. We fall back on weaker syllogisms (epagoge): if A is true, then B is true B is true

(1.3)

therefore, A becomes more plausible. The evidence does not prove that A is true, but verification of one of its consequences does give us more confidence in A. For example, let A ≡ it will start to rain by 10 am at the latest; B ≡ the sky will become cloudy before 10 am. Observing clouds at 9:45 am does not give us a logical certainty that the rain will follow; nevertheless our common sense, obeying the weak syllogism, may induce us to change our plans and behave as if we believed that it will, if those clouds are sufficiently dark. This example shows also that the major premise, ‘if A then B’ expresses B only as a logical consequence of A; and not necessarily a causal physical consequence, which could be effective only at a later time. The rain at 10 am is not the physical cause of the clouds at 1

Today, several different views are held about the exact nature of Aristotle’s contribution. Such issues are irrelevant to our present purpose, but the interested reader may find an extensive discussion of them in Lukasiewicz (1957).

1 Plausible reasoning

5

9:45 am. Nevertheless, the proper logical connection is not in the uncertain causal direction (clouds =⇒ rain), but rather (rain =⇒ clouds), which is certain, although noncausal. We emphasize at the outset that we are concerned here with logical connections, because some discussions and applications of inference have fallen into serious error through failure to see the distinction between logical implication and physical causation. The distinction is analyzed in some depth by Simon and Rescher (1966), who note that all attempts to interpret implication as expressing physical causation founder on the lack of contraposition expressed by the second syllogism (1.2). That is, if we tried to interpret the major premise as ‘A is the physical cause of B’, then we would hardly be able to accept that ‘not-B is the physical cause of not-A’. In Chapter 3 we shall see that attempts to interpret plausible inferences in terms of physical causation fare no better. Another weak syllogism, still using the same major premise, is If A is true, then B is true A is false

(1.4)

therefore, B becomes less plausible. In this case, the evidence does not prove that B is false; but one of the possible reasons for its being true has been eliminated, and so we feel less confident about B. The reasoning of a scientist, by which he accepts or rejects his theories, consists almost entirely of syllogisms of the second and third kind. Now, the reasoning of our policeman was not even of the above types. It is best described by a still weaker syllogism: If A is true, then B becomes more plausible B is true

(1.5)

therefore, A becomes more plausible. But in spite of the apparent weakness of this argument, when stated abstractly in terms of A and B, we recognize that the policeman’s conclusion has a very strong convincing power. There is something which makes us believe that, in this particular case, his argument had almost the power of deductive reasoning. These examples show that the brain, in doing plausible reasoning, not only decides whether something becomes more plausible or less plausible, but that it evaluates the degree of plausibility in some way. The plausibility for rain by 10 am depends very much on the darkness of those clouds at 9:45. And the brain also makes use of old information as well as the specific new data of the problem; in deciding what to do we try to recall our past experience with clouds and rain, and what the weatherman predicted last night. To illustrate that the policeman was also making use of the past experience of policemen in general, we have only to change that experience. Suppose that events like these happened several times every night to every policeman – and that in every case the gentleman turned

6

Part 1 Principles and elementary applications

out to be completely innocent. Very soon, policemen would learn to ignore such trivial things. Thus, in our reasoning we depend very much on prior information to help us in evaluating the degree of plausibility in a new problem. This reasoning process goes on unconsciously, almost instantaneously, and we conceal how complicated it really is by calling it common sense. The mathematician George P´olya (1945, 1954) wrote three books about plausible reasoning, pointing out a wealth of interesting examples and showing that there are definite rules by which we do plausible reasoning (although in his work they remain in qualitative form). The above weak syllogisms appear in his third volume. The reader is strongly urged to consult P´olya’s exposition, which was the original source of many of the ideas underlying the present work. We show below how P´olya’s principles may be made quantitative, with resulting useful applications. Evidently, the deductive reasoning described above has the property that we can go through long chains of reasoning of the type (1.1) and (1.2) and the conclusions have just as much certainty as the premises. With the other kinds of reasoning, (1.3)–(1.5), the reliability of the conclusion changes as we go through several stages. But in their quantitative form we shall find that in many cases our conclusions can still approach the certainty of deductive reasoning (as the example of the policeman leads us to expect). P´olya showed that even a pure mathematician actually uses these weaker forms of reasoning most of the time. Of course, on publishing a new theorem, the mathematician will try very hard to invent an argument which uses only the first kind; but the reasoning process which led to the theorem in the first place almost always involves one of the weaker forms (based, for example, on following up conjectures suggested by analogies). The same idea is expressed in a remark of S. Banach (quoted by S. Ulam, 1957): Good mathematicians see analogies between theorems; great mathematicians see analogies between analogies.

As a first orientation, then, let us note some very suggestive analogies to another field – which is itself based, in the last analysis, on plausible reasoning.

1.2 Analogies with physical theories In physics, we learn quickly that the world is too complicated for us to analyze it all at once. We can make progress only if we dissect it into little pieces and study them separately. Sometimes, we can invent a mathematical model which reproduces several features of one of these pieces, and whenever this happens we feel that progress has been made. These models are called physical theories. As knowledge advances, we are able to invent better and better models, which reproduce more and more features of the real world, more and more accurately. Nobody knows whether there is some natural end to this process, or whether it will go on indefinitely.

1 Plausible reasoning

7

In trying to understand common sense, we shall take a similar course. We won’t try to understand it all at once, but we shall feel that progress has been made if we are able to construct idealized mathematical models which reproduce a few of its features. We expect that any model we are now able to construct will be replaced by more complete ones in the future, and we do not know whether there is any natural end to this process. The analogy with physical theories is deeper than a mere analogy of method. Often, the things which are most familiar to us turn out to be the hardest to understand. Phenomena whose very existence is unknown to the vast majority of the human race (such as the difference in ultraviolet spectra of iron and nickel) can be explained in exhaustive mathematical detail – but all of modern science is practically helpless when faced with the complications of such a commonplace fact as growth of a blade of grass. Accordingly, we must not expect too much of our models; we must be prepared to find that some of the most familiar features of mental activity may be ones for which we have the greatest difficulty in constructing any adequate model. There are many more analogies. In physics we are accustomed to finding that any advance in knowledge leads to consequences of great practical value, but of an unpredictable nature. R¨ontgen’s discovery of X-rays led to important new possibilities of medical diagnosis; Maxwell’s discovery of one more term in the equation for curl H led to practically instantaneous communication all over the earth. Our mathematical models for common sense also exhibit this feature of practical usefulness. Any successful model, even though it may reproduce only a few features of common sense, will prove to be a powerful extension of common sense in some field of application. Within this field, it enables us to solve problems of inference which are so involved in complicated detail that we would never attempt to solve them without its help.

1.3 The thinking computer Models have practical uses of a quite different type. Many people are fond of saying, ‘They will never make a machine to replace the human mind – it does many things which no machine could ever do.’ A beautiful answer to this was given by J. von Neumann in a talk on computers given in Princeton in 1948, which the writer was privileged to attend. In reply to the canonical question from the audience (‘But of course, a mere machine can’t really think, can it?’), he said: You insist that there is something a machine cannot do. If you will tell me precisely what it is that a machine cannot do, then I can always make a machine which will do just that!

In principle, the only operations which a machine cannot perform for us are those which we cannot describe in detail, or which could not be completed in a finite number of steps. Of course, some will conjure up images of G¨odel incompleteness, undecidability, Turing machines which never stop, etc. But to answer all such doubts we need only point to the

8

Part 1 Principles and elementary applications

existence of the human brain, which does it. Just as von Neumann indicated, the only real limitations on making ‘machines which think’ are our own limitations in not knowing exactly what ‘thinking’ consists of. But in our study of common sense we shall be led to some very explicit ideas about the mechanism of thinking. Every time we can construct a mathematical model which reproduces a part of common sense by prescribing a definite set of operations, this shows us how to ‘build a machine’, (i.e. write a computer program) which operates on incomplete information and, by applying quantitative versions of the above weak syllogisms, does plausible reasoning instead of deductive reasoning. Indeed, the development of such computer software for certain specialized problems of inference is one of the most active and useful current trends in this field. One kind of problem thus dealt with might be: given a mass of data, comprising 10 000 separate observations, determine in the light of these data and whatever prior information is at hand, the relative plausibilities of 100 different possible hypotheses about the causes at work. Our unaided common sense might be adequate for deciding between two hypotheses whose consequences are very different; but, in dealing with 100 hypotheses which are not very different, we would be helpless without a computer and a well-developed mathematical theory that shows us how to program it. That is, what determines, in the policeman’s syllogism (1.5), whether the plausibility for A increases by a large amount, raising it almost to certainty; or only a negligibly small amount, making the data B almost irrelevant? The object of the present work is to develop the mathematical theory which answers such questions, in the greatest depth and generality now possible. While we expect a mathematical theory to be useful in programming computers, the idea of a thinking computer is also helpful psychologically in developing the mathematical theory. The question of the reasoning process used by actual human brains is charged with emotion and grotesque misunderstandings. It is hardly possible to say anything about this without becoming involved in debates over issues that are not only undecidable in our present state of knowledge, but are irrelevant to our purpose here. Obviously, the operation of real human brains is so complicated that we can make no pretense of explaining its mysteries; and in any event we are not trying to explain, much less reproduce, all the aberrations and inconsistencies of human brains. That is an interesting and important subject; but it is not the subject we are studying here. Our topic is the normative principles of logic, and not the principles of psychology or neurophysiology. To emphasize this, instead of asking, ‘How can we build a mathematical model of human common sense?’, let us ask, ‘How could we build a machine which would carry out useful plausible reasoning, following clearly defined principles expressing an idealized common sense?’ 1.4 Introducing the robot In order to direct attention to constructive things and away from controversial irrelevancies, we shall invent an imaginary being. Its brain is to be designed by us, so that it reasons

1 Plausible reasoning

9

according to certain definite rules. These rules will be deduced from simple desiderata which, it appears to us, would be desirable in human brains; i.e. we think that a rational person, on discovering that they were violating one of these desiderata, would wish to revise their thinking. In principle, we are free to adopt any rules we please; that is our way of defining which robot we shall study. Comparing its reasoning with yours, if you find no resemblance you are in turn free to reject our robot and design a different one more to your liking. But if you find a very strong resemblance, and decide that you want and trust this robot to help you in your own problems of inference, then that will be an accomplishment of the theory, not a premise. Our robot is going to reason about propositions. As already indicated above, we shall denote various propositions by italicized capital letters, {A, B, C, etc.}, and for the time being we must require that any proposition used must have, to the robot, an unambiguous meaning and must be of the simple, definite logical type that must be either true or false. That is, until otherwise stated, we shall be concerned only with two-valued logic, or Aristotelian logic. We do not require that the truth or falsity of such an ‘Aristotelian proposition’ be ascertainable by any feasible investigation; indeed, our inability to do this is usually just the reason why we need the robot’s help. For example, the writer personally considers both of the following propositions to be true: A ≡ Beethoven and Berlioz never met. B ≡ Beethoven’s music has a better sustained quality than that of Berlioz, although Berlioz at his best is the equal of anybody. Proposition B is not a permissible one for our robot to think about at present, whereas proposition A is, although it is unlikely that its truth or falsity could be definitely established today.2 After our theory is developed, it will be of interest to see whether the present restriction to Aristotelian propositions such as A can be relaxed, so that the robot might help us also with more vague propositions such as B (see Chapter 18 on the A p -distribution).3

1.5 Boolean algebra To state these ideas more formally, we introduce some notation of the usual symbolic logic, or Boolean algebra, so called because George Boole (1854) introduced a notation similar to the following. Of course, the principles of deductive logic itself were well understood centuries before Boole, and, as we shall see, all the results that follow from Boolean algebra were contained already as special cases in the rules of plausible inference given 2

3

Their meeting is a chronological possibility, since their lives overlapped by 24 years; my reason for doubting it is the failure of Berlioz to mention any such meeting in his memoirs – on the other hand, neither does he come out and say definitely that they did not meet. The question of how one is to make a machine in some sense ‘cognizant’ of the conceptual meaning that a proposition like A has to humans, might seem very difficult, and much of the subject of artificial intelligence is devoted to inventing ad hoc devices to deal with this problem. However, we shall find in Chapter 4 that for us the problem is almost nonexistent; our rules for plausible reasoning automatically provide the means to do the mathematical equivalent of this.

10

Part 1 Principles and elementary applications

by (1812). The symbol AB,

(1.6)

called the logical product or the conjunction, denotes the proposition ‘both A and B are true’. Obviously, the order in which we state them does not matter; AB and B A say the same thing. The expression A + B,

(1.7)

called the logical sum or disjunction, stands for ‘at least one of the propositions, A, B is true’ and has the same meaning as B + A. These symbols are only a shorthand way of writing propositions, and do not stand for numerical values. Given two propositions A, B, it may happen that one is true if and only if the other is true; we then say that they have the same truth value. This may be only a simple tautology (i.e. A and B are verbal statements which obviously say the same thing), or it may be that only after immense mathematical labor is it finally proved that A is the necessary and sufficient condition for B. From the standpoint of logic it does not matter; once it is established, by any means, that A and B have the same truth value, then they are logically equivalent propositions, in the sense that any evidence concerning the truth of one pertains equally well to the truth of the other, and they have the same implications for any further reasoning. Evidently, then, it must be the most primitive axiom of plausible reasoning that two propositions with the same truth value are equally plausible. This might appear almost too trivial to mention, were it not for the fact that Boole himself (Boole, 1854, p. 286) fell into error on this point, by mistakenly identifying two propositions which were in fact different – and then failing to see any contradiction in their different plausibilities. Three years later, Boole (1857) gave a revised theory which supersedes that in his earlier book; for further comments on this incident, see Keynes (1921, pp. 167–168); Jaynes (1976, pp. 240–242). In Boolean algebra, the equal sign is used to denote not equal numerical value, but equal truth value: A = B, and the ‘equations’ of Boolean algebra thus consist of assertions that the proposition on the left-hand side has the same truth value as the one on the right-hand side. The symbol ‘≡’ means, as usual, ‘equals by definition’. In denoting complicated propositions we use parentheses in the same way as in ordinary algebra, i.e. to indicate the order in which propositions are to be combined (at times we shall use them also merely for clarity of expression although they are not strictly necessary). In their absence we observe the rules of algebraic hierarchy, familiar to those who use hand calculators: thus AB + C denotes (AB) + C; and not A(B + C). The denial of a proposition is indicated by a bar: A ≡ A is false.

(1.8)

The relation between A, A is a reciprocal one: A = A is false,

(1.9)

1 Plausible reasoning

11

and it does not matter which proposition we denote by the barred and which by the unbarred letter. Note that some care is needed in the unambiguous use of the bar. For example, according to the above conventions, AB = AB is false;

(1.10)

A B = both A and B are false.

(1.11)

These are quite different propositions; in fact, AB is not the logical product A B, but the logical sum: AB = A + B. With these understandings, Boolean algebra is characterized by some rather trivial and obvious basic identities, which express the properties of: AA = A Idempotence: A+ A= A Commutativity: Associativity: Distributivity: Duality:

AB = B A A+B = B+ A A(BC) = (AB)C = ABC A + (B + C) = (A + B) + C = A + B + C

(1.12)

A(B + C) = AB + AC A + (BC) = (A + B)(A + C) If C = AB, then C = A + B If D = A + B, then D = A B

but by their application one can prove any number of further relations, some highly nontrivial. For example, we shall presently have use for the rather elementary theorem: if B = AD then A B = B and B A = A.

(1.13)

Implication The proposition A⇒B

(1.14)

to be read as ‘A implies B’, does not assert that either A or B is true; it means only that A B is false, or, what is the same thing, (A + B) is true. This can be written also as the logical equation A = AB. That is, given (1.14), if A is true then B must be true; or, if B is false then A must be false. This is just what is stated in the strong syllogisms (1.1) and (1.2).

12

Part 1 Principles and elementary applications

On the other hand, if A is false, (1.14) says nothing about B: and if B is true, (1.14) says nothing about A. But these are just the cases in which our weak syllogisms (1.3), (1.4) do say something. In one respect, then, the term ‘weak syllogism’ is misleading. The theory of plausible reasoning based on weak syllogisms is not a ‘weakened’ form of logic; it is an extension of logic with new content not present at all in conventional deductive logic. It will become clear in the next chapter (see (2.69) and (2.70)) that our rules include deductive logic as a special case. A tricky point Note carefully that in ordinary language one would take ‘A implies B’ to mean that B is logically deducible from A. But, in formal logic, ‘A implies B’ means only that the propositions A and AB have the same truth value. In general, whether B is logically deducible from A does not depend only on the propositions A and B; it depends on the totality of propositions (A, A , A , . . .) that we accept as true and which are therefore available to use in the deduction. Devinatz (1968, p. 3) and Hamilton (1988, p. 5) give the truth table for the implication as a binary operation, illustrating that A ⇒ B is false only if A is true and B is false; in all other cases A ⇒ B is true! This may seem startling at first glance; however, note that, indeed, if A and B are both true, then A = AB and so A ⇒ B is true; in formal logic every true statement implies every other true statement. On the other hand, if A is false, then AQ is also false for all Q, thus A = AB and A = AB are both true, so A ⇒ B and A ⇒ B are both true; a false proposition implies all propositions. If we tried to interpret this as logical deducibility (i.e. both B and B are deducible from A), it would follow that every false proposition is logically contradictory. Yet the proposition: ‘Beethoven outlived Berlioz’ is false but hardly logically contradictory (for Beethoven did outlive many people who were the same age as Berlioz). Obviously, merely knowing that propositions A and B are both true does not provide enough information to decide whether either is logically deducible from the other, plus some unspecified ‘toolbox’ of other propositions. The question of logical deducibility of one proposition from a set of others arises in a crucial way in the G¨odel theorem discussed at the end of Chapter 2. This great difference in the meaning of the word ‘implies’ in ordinary language and in formal logic is a tricky point that can lead to serious error if it is not properly understood; it appears to us that ‘implication’ is an unfortunate choice of word, and that this is not sufficiently emphasized in conventional expositions of logic.

1.6 Adequate sets of operations We note some features of deductive logic which will be needed in the design of our robot. We have defined four operations, or ‘connectives’, by which, starting from two propositions A, B, other propositions may be defined: the logical product or conjunction AB, the logical

1 Plausible reasoning

13

sum or disjunction A + B, the implication A ⇒ B, and the negation A. By combining these operations repeatedly in every possible way, one can generate any number of new propositions, such as C ≡ (A + B)(A + A B) + A B(A + B).

(1.15)

Many questions then occur to us: How large is the class of new propositions thus generated? Is it infinite, or is there a finite set that is closed under these operations? Can every proposition defined from A, B be thus represented, or does this require further connectives beyond the above four? Or are these four already overcomplete so that some might be dispensed with? What is the smallest set of operations that is adequate to generate all such ‘logic functions’ of A and B? If instead of two starting propositions A, B we have an arbitrary number {A1 , . . . , An }, is this set of operations still adequate to generate all possible logic functions of {A1 , . . . , An }? All these questions are answered easily, with results useful for logic, probability theory, and computer design. Broadly speaking, we are asking whether, starting from our present vantage point, we can (1) increase the number of functions, (2) decrease the number of operations. The first query is simplified by noting that two propositions, although they may appear entirely different when written out in the manner (1.15), are not different propositions from the standpoint of logic if they have the same truth value. For example, it is left for the reader to verify that C in (1.15) is logically the same statement as the implication C = (B ⇒ A). Since we are, at this stage, restricting our attention to Aristotelian propositions, any logic function C = f (A, B) such as (1.15) has only two possible ‘values’, true and false; and likewise the ‘independent variables’ A and B can take on only those two values. At this point, a logician might object to our notation, saying that the symbol A has been defined as standing for some fixed proposition, whose truth cannot change; so if we wish to consider logic functions, then instead of writing C = f (A, B) we should introduce new symbols and write z = f (x, y), where x, y, z, are ‘statement variables’ for which various specific statements A, B, C may be substituted. But if A stands for some fixed but unspecified proposition, then it can still be either true or false. We achieve the same flexibility merely by the understanding that equations like (1.15) which define logic functions are to be true for all ways of defining A, B ; i.e. instead of a statement variable we use a variable statement. In relations of the form C = f (A, B), we are concerned with logic functions defined on a discrete ‘space’ S consisting of only 22 = 4 points; namely those at which A and B take on the ‘values’ {TT, TF, FT, FF}, respectively; and, at each point, the function f (A, B) can take on independently either of two values {T, F}. There are, therefore, exactly 24 = 16 different logic functions f (A, B), and no more. An expression B = f (A1 , . . . , An ) involving n propositions is a logic function on a space S of M = 2n points; and there are exactly 2 M such functions.

14

Part 1 Principles and elementary applications

In the case n = 1, there are four logic functions { f 1 (A), . . . , f 4 (A)}, which we can define by enumeration, listing all their possible values in a truth table: A

T

F

f 1 (A) f 2 (A) f 3 (A) f 4 (A)

T T F F

T F T F

But it is obvious by inspection that these are just f 1 (A) = f 2 (A) = f 3 (A) = f 4 (A) =

A+ A A A A A,

(1.16)

so we prove by enumeration that the three operations: conjunction, disjunction, and negation are adequate to generate all logic functions of a single proposition. For the case of general n, consider first the special functions, each of which is true at one and only one point of S. For n = 2 there are 2n = 4 such functions, A, B

TT

TF

FT

FF

f 1 (A, B) f 2 (A, B) f 3 (A, B) f 4 (A, B)

T F F F

F T F F

F F T F

F F F T

It is clear by inspection that these are just the four basic conjunctions, f 1 (A, B) = f 2 (A, B) = f 3 (A, B) = f 4 (A, B) =

A A A A

B B B B.

(1.17)

Consider now any logic function which is true on certain specified points of S; for example, f 5 (A, B) and f 6 (A, B), defined by

A, B

TT

TF

FT

FF

f 5 (A, B) f 6 (A, B)

F T

T F

F T

T T

1 Plausible reasoning

15

We assert that each of these functions is the logical sum of the conjunctions (1.17) that are true on the same points (this is not trivial; the reader should verify it in detail). Thus, f 5 (A, B) = f 2 (A, B) + f 4 (A, B) = A B+A B = (A + A) B = B,

(1.18)

and, likewise, f 6 (A, B) = = = =

f 1 (A, B) + f 3 (A, B) + f 4 (A, B) AB + A B + A B B+A B A + B.

(1.19)

That is, f 6 (A, B) is the implication f 6 (A, B) = (A ⇒ B), with the truth table discussed above. Any logic function f (A, B) that is true on at least one point of S can be constructed in this way as a logical sum of the basic conjunctions (1.17). There are 24 − 1 = 15 such functions. For the remaining function, which is always false, it suffices to take the contradiction, f 16 (A, B) ≡ A A. This method (called ‘reduction to disjunctive normal form’ in logic textbooks) will work for any n. For example, in the case n = 5 there are 25 = 32 basic conjunctions, {ABC D E, ABC D E, ABC D E, . . . , A B C D E},

(1.20)

and 232 = 4 294 967 296 different logic functions f i (A, B, C, D, E); of which 4 294 967 295 can be written as logical sums of the basic conjunctions, leaving only the contradiction f 4294967296 (A, B, C, D, E) = A A.

(1.21)

Thus one can verify by ‘construction in thought’ that the three operations {conjunction, disjunction, negation},

i.e.

{AND, OR, NOT},

(1.22)

suffice to generate all possible logic functions; or, more concisely, they form an adequate set. The duality property (1.12) shows that a smaller set will suffice; for disjunction of A, B is the same as denying that they are both false: A + B = (A B).

(1.23)

Therefore, the two operations (AND, NOT) already constitute an adequate set for deductive logic.4 This fact will be essential in determining when we have an adequate set of rules for plausible reasoning; see Chapter 2. 4

For you to ponder: Does it follow that these two commands are the only ones needed to write any computer program?

16

Part 1 Principles and elementary applications

It is clear that we cannot now strike out either of these operations, leaving only the other; i.e. the operation ‘AND’ cannot be reduced to negations; and negation cannot be accomplished by any number of ‘AND’ operations. But this still leaves open the possibility that both conjunction and negation might be reducible to some third operation, not yet introduced, so that a single logic operation would constitute an adequate set. It comes as a pleasant surprise to find that there is not only one but two such operations. The operation ‘NAND’ is defined as the negation of ‘AND’: A ↑ B ≡ AB = A + B

(1.24)

which we can read as ‘A NAND B’. But then we have at once A=A↑A AB = (A ↑ B) ↑ (A ↑ B) A + B = (A ↑ A) ↑ (B ↑ B).

(1.25)

Therefore, every logic function can be constructed with NAND alone. Likewise, the operation NOR defined by A↓ B ≡ A+B = A B

(1.26)

is also powerful enough to generate all logic functions: A=A↓A A + B = (A ↓ B) ↓ (A ↓ B) AB = (A ↓ A) ↓ (B ↓ B).

(1.27)

One can take advantage of this in designing computer and logic circuits. A ‘logic gate’ is a circuit having, besides a common ground, two input terminals and one output. The voltage relative to ground at any of these terminals can take on only two values; say +3 volts, or ‘up’, representing ‘true’; and 0 volts or ‘down’, representing ‘false’. A NAND gate is thus one whose output is up if and only if at least one of the inputs is down; or, what is the same thing, down if and only if both inputs are up; while for a NOR gate the output is up if and only if both inputs are down. One of the standard components of logic circuits is the ‘quad NAND gate’, an integrated circuit containing four independent NAND gates on one semiconductor chip. Given a sufficient number of these and no other circuit components, it is possible to generate any required logic function by interconnecting them in various ways. This short excursion into deductive logic is as far as we need go for our purposes. Further developments are given in many textbooks; for example, a modern treatment of Aristotelian logic is given by Copi (1994). For non-Aristotelian forms with special emphasis on G¨odel incompleteness, computability, decidability, Turing machines, etc., see Hamilton (1988). We turn now to our extension of logic, which is to follow from the conditions discussed next. We call them ‘desiderata’ rather than ‘axioms’ because they do not assert that anything is ‘true’ but only state what appear to be desirable goals. Whether these goals are attainable

1 Plausible reasoning

17

without contradictions, and whether they determine any unique extension of logic, are matters of mathematical analysis, given in Chapter 2.

1.7 The basic desiderata To each proposition about which it reasons, our robot must assign some degree of plausibility, based on the evidence we have given it; and whenever it receives new evidence it must revise these assignments to take that new evidence into account. In order that these plausibility assignments can be stored and modified in the circuits of its brain, they must be associated with some definite physical quantity, such as voltage or pulse duration or a binary coded number, etc. – however our engineers want to design the details. For present purposes, this means that there will have to be some kind of association between degrees of plausibility and real numbers: (I)

Degrees of plausibility are represented by real numbers.

(1.28)

Desideratum (I) is practically forced on us by the requirement that the robot’s brain must operate by the carrying out of some definite physical process. However, it will appear (Appendix A) that it is also required theoretically; we do not see the possibility of any consistent theory without a property that is equivalent functionally to desideratum (I). We adopt a natural but nonessential convention: that a greater plausibility shall correspond to a greater number. It will also be convenient to assume a continuity property, which is hard to state precisely at this stage; to say it intuitively: an infinitesimally greater plausibility ought to correspond only to an infinitesimally greater number. The plausibility that the robot assigns to some proposition A will, in general, depend on whether we told it that some other proposition B is true. Following the notation of Keynes (1921) and Cox (1961), we indicate this by the symbol A|B,

(1.29)

which we may call ‘the conditional plausibility that A is true, given that B is true’ or just ‘A given B’. It stands for some real number. Thus, for example, A|BC

(1.30)

(which we may read as ‘A given BC’) represents the plausibility that A is true, given that both B and C are true. Or, A + B|C D

(1.31)

represents the plausibility that at least one of the propositions A and B is true, given that both C and D are true; and so on. We have decided to represent a greater plausibility by a greater number, so (A|B) > (C|B)

(1.32)

18

Part 1 Principles and elementary applications

says that, given B, A is more plausible than C. In this notation, while the symbol for plausibility is just of the form A|B without parentheses, we often add parentheses for clarity of expression. Thus, (1.32) says the same thing as A|B > C|B,

(1.33)

but its meaning is clearer to the eye. In the interest of avoiding impossible problems, we are not going to ask our robot to undergo the agony of reasoning from impossible or mutually contradictory premises; there could be no ‘correct’ answer. Thus, we make no attempt to define A|BC when B and C are mutually contradictory. Whenever such a symbol appears, it is understood that B and C are compatible propositions. Also, we do not want this robot to think in a way that is directly opposed to the way you and I think. So we shall design it to reason in a way that is at least qualitatively like the way humans try to reason, as described by the above weak syllogisms and a number of other similar ones. Thus, if it has old information C which gets updated to C in such a way that the plausibility for A is increased: (A|C ) > (A|C);

(1.34)

but the plausibility for B given A is not changed: (B|AC ) = (B|AC).

(1.35)

This can, of course, produce only an increase, never a decrease, in the plausibility that both A and B are true: (AB|C ) ≥ (AB|C);

(1.36)

and it must produce a decrease in the plausibility that A is false: (A|C ) < (A|C).

(1.37)

This qualitative requirement simply gives the ‘sense of direction’ in which the robot’s reasoning is to go; it says nothing about how much the plausibilities change, except that our continuity assumption (which is also a condition for qualitative correspondence with common sense) now requires that if A|C changes only infinitesimally, it can induce only an infinitesimal change in AB|C and A|C. The specific ways in which we use these qualitative requirements will be given in the next chapter, at the point where it is seen why we need them. For the present we summarize them simply as: (II) Qualitative correspondence with common sense.

(1.38)

Finally, we want to give our robot another desirable property for which honest people strive without always attaining: that it always reasons consistently. By this we mean just the three

1 Plausible reasoning

19

common colloquial meanings of the word ‘consistent’: (IIIa)

If a conclusion can be reasoned out in more than one way, then every possible way must lead to the same result.

(1.39a)

(IIIb)

The robot always takes into account all of the evidence it has relevant to a question. It does not arbitrarily ignore some of the information, basing its conclusions only on what remains. In other words, the robot is completely nonideological.

(1.39b)

(IIIc)

The robot always represents equivalent states of knowledge by equivalent plausibility assignments. That is, if in two problems the robot’s state of knowledge is the same (except perhaps for the labeling of the propositions), then it must assign the same plausibilities in both.

(1.39c)

Desiderata (I), (II), and (IIIa) are the basic ‘structural’ requirements on the inner workings of our robot’s brain, while (IIIb) and (IIIc) are ‘interface’ conditions which show how the robot’s behavior should relate to the outer world. At this point, most students are surprised to learn that our search for desiderata is at an end. The above conditions, it turns out, uniquely determine the rules by which our robot must reason; i.e. there is only one set of mathematical operations for manipulating plausibilities which has all these properties. These rules are deduced in Chapter 2. (At the end of most chapters, we insert a section of informal Comments in which are collected various side remarks, background material, etc. The reader may skip them without losing the main thread of the argument.)

1.8 Comments As politicians, advertisers, salesmen, and propagandists for various political, economic, moral, religious, psychic, environmental, dietary, and artistic doctrinaire positions know only too well, fallible human minds are easily tricked, by clever verbiage, into committing violations of the above desiderata. We shall try to ensure that they do not succeed with our robot. We emphasize another contrast between the robot and a human brain. By Desideratum I, the robot’s mental state about any proposition is to be represented by a real number. Now, it is clear that our attitude toward any given proposition may have more than one ‘coordinate’. You and I form simultaneous judgments about a proposition not only as to whether it is plausible, but also whether it is desirable, whether it is important, whether it is useful, whether it is interesting, whether it is amusing, whether it is morally right, etc. If we assume that each of these judgments might be represented by a number, then a fully adequate description of a human state of mind would be represented by a vector in a space of a rather large number of dimensions.

20

Part 1 Principles and elementary applications

Not all propositions require this. For example, the proposition ‘The refractive index of water is less than 1.3’ generates no emotions; consequently the state of mind which it produces has very few coordinates. On the other hand, the proposition, ‘Your mother-inlaw just wrecked your new car’ generates a state of mind with many coordinates. Quite generally, the situations of everyday life are those involving many coordinates. It is just for this reason, we suggest, that the most familiar examples of mental activity are often the most difficult to reproduce by a model. Perhaps we have here the reason why science and mathematics are the most successful of human activities: they deal with propositions which produce the simplest of all mental states. Such states would be the ones least perturbed by a given amount of imperfection in the human mind. Of course, for many purposes we would not want our robot to adopt any of these more ‘human’ features arising from the other coordinates. It is just the fact that computers do not get confused by emotional factors, do not get bored with a lengthy problem, do not pursue hidden motives opposed to ours, that makes them safer agents than men for carrying out certain tasks. These remarks are interjected to point out that there is a large unexplored area of possible generalizations and extensions of the theory to be developed here; perhaps this may inspire others to try their hand at developing ‘multidimensional theories’ of mental activity, which would more and more resemble the behavior of actual human brains – not all of which is undesirable. Such a theory, if successful, might have an importance beyond our present ability to imagine.5 For the present, however, we shall have to be content with a much more modest undertaking. Is it possible to develop a consistent ‘one-dimensional’ model of plausible reasoning? Evidently, our problem will be simplest if we can manage to represent a degree of plausibility uniquely by a single real number, and ignore the other ‘coordinates’ just mentioned. We stress that we are in no way asserting that degrees of plausibility in actual human minds have a unique numerical measure. Our job is not to postulate – or indeed to conjecture about – any such thing; it is to investigate whether it is possible, in our robot, to set up such a correspondence without contradictions. But to some it may appear that we have already assumed more than is necessary, thereby putting gratuitous restrictions on the generality of our theory. Why must we represent degrees of plausibility by real numbers? Would not a ‘comparative’ theory based on a system of qualitative ordering relations such as (A|C) > (B|C) suffice? This point is discussed further in Appendix A, where we describe other approaches to probability theory and note that some attempts have been made to develop comparative theories which it was thought would be logically simpler, or more general. But this turned out not to be the case; so, although it is quite possible to develop the foundations in other ways than ours, the final results will not be different. 5

Indeed, some psychologists think that as few as five dimensions might suffice to characterize a human personality; that is, that we all differ only in having different mixes of five basic personality traits which may be genetically determined. But it seems to us that this must be grossly oversimplified; identifiable chemical factors continuously varying in both space and time (such as the distribution of glucose metabolism in the brain) affect mental activity but cannot be represented faithfully in a space of only five dimensions. Yet it may be that five numbers can capture enough of the truth to be useful for many purposes.

1 Plausible reasoning

21

1.8.1 Common language vs. formal logic We should note the distinction between the statements of formal logic and those of ordinary language. It might be thought that the latter is only a less precise form of expression; but on examination of details the relation appears different. It appears to us that ordinary language, carefully used, need not be less precise than formal logic; but ordinary language is more complicated in its rules and has consequently richer possibilities of expression than we allow ourselves in formal logic. In particular, common language, being in constant use for other purposes than logic, has developed subtle nuances – means of implying something without actually stating it – that are lost on formal logic. Mr A, to affirm his objectivity, says, ‘I believe what I see.’ Mr B retorts: ‘He doesn’t see what he doesn’t believe.’ From the standpoint of formal logic, it appears that they have said the same thing; yet from the standpoint of common language, those statements had the intent and effect of conveying opposite meanings. Here is a less trivial example, taken from a mathematics textbook. Let L be a straight line in a plane, and S an infinite set of points in that plane, each of which is projected onto L. Now consider the following statements: (I) The projection of the limit is the limit of the projections. (II) The limit of the projections is the projection of the limit. These have the grammatical structures ‘A is B’ and ‘B is A’, and so they might appear logically equivalent. Yet in that textbook, (I) was held to be true, and (II) not true in general, on the grounds that the limit of the projections may exist when the limit of the set does not. As we see from this, in common language – even in mathematics textbooks – we have learned to read subtle nuances of meaning into the exact phrasing, probably without realizing it until an example like this is pointed out. We interpret ‘A is B’ as asserting first of all, as a kind of major premise, that A exists; and the rest of the statement is understood to be conditional on that premise. Put differently, in common grammar the verb ‘is’ implies a distinction between subject and object, which the symbol ‘=’ does not have in formal logic or in conventional mathematics. (However, in computer languages we encounter such statements as ‘J = J + 1’, which everybody seems to understand, but in which the ‘=’ sign has now acquired that implied distinction after all.) Another amusing example is the old adage ‘knowledge is power’, which is a very cogent truth, both in human relations and in thermodynamics. An ad writer for a chemical trade journal6 fouled this up into ‘power is knowledge’, an absurd – indeed, obscene – falsity. These examples remind us that the verb ‘is’ has, like any other verb, a subject and a predicate; but it is seldom noted that this verb has two entirely different meanings. A person whose native language is English may require some effort to see the different meanings in the statements: ‘The room is noisy’ and ‘There is noise in the room’. But in Turkish these meanings are rendered by different words, which makes the distinction so clear that a visitor 6

LC-CG Magazine, March 1988, p. 211.

22

Part 1 Principles and elementary applications

who uses the wrong word will not be understood. The latter statement is ontological, asserting the physical existence of something, while the former is epistemological, expressing only the speaker’s personal perception. Common language – or, at least, the English language – has an almost universal tendency to disguise epistemological statements by putting them into a grammatical form which suggests to the unwary an ontological statement. A major source of error in current probability theory arises from an unthinking failure to perceive this. To interpret the first kind of statement in the ontological sense is to assert that one’s own private thoughts and sensations are realities existing externally in Nature. We call this the ‘mind projection fallacy’, and note the trouble it causes many times in what follows. But this trouble is hardly confined to probability theory; as soon as it is pointed out, it becomes evident that much of the discourse of philosophers and Gestalt psychologists, and the attempts of physicists to explain quantum theory, are reduced to nonsense by the author falling repeatedly into the mind projection fallacy. These examples illustrate the care that is needed when we try to translate the complex statements of common language into the simpler statements of formal logic. Of course, common language is often less precise than we should want in formal logic. But everybody expects this and is on the lookout for it, so it is less dangerous. It is too much to expect that our robot will grasp all the subtle nuances of common language, which a human spends perhaps 20 years acquiring. In this respect, our robot will remain like a small child – it interprets all statements literally and blurts out the truth without thought of whom this may offend. It is unclear to the writer how difficult – and even less clear how desirable – it would be to design a newer model robot with the ability to recognize these finer shades of meaning. Of course, the question of principle is disposed of at once by the existence of the human brain, which does this. But, in practice, von Neumann’s principle applies; a robot designed by us cannot do it until someone develops a theory of ‘nuance recognition’, which reduces the process to a definitely prescribed set of operations. This we gladly leave to others. In any event, our present model robot is quite literally real, because today it is almost universally true that any nontrivial probability evaluation is performed by a computer. The person who programmed that computer was necessarily, whether or not they thought of it that way, designing part of the brain of a robot according to some preconceived notion of how the robot should behave. But very few of the computer programs now in use satisfy all our desiderata; indeed, most are intuitive ad hoc procedures that were not chosen with any well-defined desiderata at all in mind. Any such adhockery is presumably usable within some special area of application – that was the criterion for choosing it – but as the proofs of Chapter 2 will show, any adhockery which conflicts with the rules of probability theory must generate demonstrable inconsistencies when we try to apply it beyond some restricted area. Our aim is to avoid this by developing the general principles of inference once and for all, directly from the requirement of consistency, and in a form applicable to any problem of plausible inference that is formulated in a sufficiently unambiguous way.

1 Plausible reasoning

23

1.8.2 Nitpicking As is apparent from the above, in the present work we use the term ‘Boolean algebra’ in its long-established meaning as referring to two-valued logic in which symbols like ‘A’ stand for propositions. A compulsive nitpicker has complained to us that some mathematicians have used the term in a slightly different meaning, in which ‘A’ could refer to a class of propositions. But the two usages are not in conflict; we recognize the broader meaning, but just find no reason to avail ourselves of it. The set of rules and symbols that we have called ‘Boolean algebra’ is sometimes called ‘the propositional calculus’. The term seems to be used only for the purpose of adding that we need also another set of rules and symbols called ‘the predicate calculus’. However, these new symbols prove to be only abbreviations for short and familiar phrases. The ‘universal quantifier’ is only an abbreviation for ‘for all’; the ‘existential quantifier’ is an abbreviation for ‘there is a’. If we merely write our statements in plain English, we are using automatically all of the predicate calculus that we need for our purposes, and doing it more intelligibly. The validity of the second strong syllogism (in two-valued logic) is sometimes questioned. However, it appears that in current mathematics it is still considered valid reasoning to say that a supposed theorem is disproved by exhibiting a counterexample, that a set of statements is considered inconsistent if we can derive a contradiction from them, and that a proposition can be established by reductio ad absurdum, deriving a contradiction from its denial. This is enough for us; we are quite content to follow this long tradition. Our feeling of security in this stance comes from the conviction that, while logic may move forward in the future, it can hardly move backward. A new logic might lead to new results about which Aristotelian logic has nothing to say; indeed, that is just what we are trying to create here. But surely, if a new logic was found to conflict with Aristotelian logic in an area where Aristotelian logic is applicable, we would consider that a fatal objection to the new logic. Therefore, to those who feel confined by two-valued deductive logic, we can say only: ‘By all means, investigate other possibilities if you wish to; and please let us know about it as soon as you have found a new result that was not contained in two-valued logic or our extension of it, and is useful in scientific inference.’ Actually, there are many different and mutually inconsistent multiple-valued logics already in the literature. But in Appendix A we adduce arguments which suggest that they can have no useful content that is not already in two-valued logic; that is, that an n-valued logic applied to one set of propositions is either equivalent to a two-valued logic applied to an enlarged set, or else it contains internal inconsistencies. Our experience is consistent with this conjecture; in practice, multiple-valued logics seem to be used not to find new useful results, but rather in attempts to remove supposed difficulties with two-valued logic, particularly in quantum theory, fuzzy sets, and artificial intelligence. But on closer study, all such difficulties known to us have proved to be only examples of the mind projection fallacy, calling for direct revision of the concepts rather than a new logic.

2 The quantitative rules

Probability theory is nothing but common sense reduced to calculation. Laplace, 1819 We have now formulated our problem, and it is a matter of straightforward mathematics to work out the consequences of our desiderata, which may be stated broadly as follows: (I) Representation of degrees of plausibility by real numbers; (II) Qualitative correspondence with common sense; (III) Consistency. The present chapter is devoted entirely to deduction of the quantitative rules for inference which follow from these desiderata. The resulting rules have a long, complicated, and astonishing history, full of lessons for scientific methodology in general (see the Comments sections at the end of several chapters).

2.1 The product rule We first seek a consistent rule relating the plausibility of the logical product AB to the plausibilities of A and B separately. In particular, let us find AB|C. Since the reasoning is somewhat subtle, we examine this from several different viewpoints. As a first orientation, note that the process of deciding that AB is true can be broken down into elementary decisions about A and B separately. The robot can (1) decide that B is true; (2) having accepted B as true, decide that A is true.

(B|C) (A|BC)

Or, equally well, (1 ) decide that A is true; (2 ) having accepted A as true, decide that B is true.

(A|C) (B|AC)

In each case we indicate above the plausibility corresponding to that step. Now let us describe the first procedure in words. In order for AB to be a true proposition, it is necessary that B is true. Thus the plausibility B|C should be involved. In addition, if B 24

2 The quantitative rules

25

is true, it is further necessary that A should be true; so the plausibility A|BC is also needed. But if B is false, then of course AB is false independently of whatever one knows about A, as expressed by A|B C; if the robot reasons first about B, then the plausibility of A will be relevant only if B is true. Thus, if the robot has B|C and A|BC it will not need A|C. That would tell it nothing about AB that it did not have already. Similarly, A|B and B|A are not needed; whatever plausibility A or B might have in the absence of information C could not be relevant to judgments of a case in which the robot knows that C is true. For example, if the robot learns that the earth is round, then in judging questions about cosmology today, it does not need to take into account the opinions it might have (i.e. the extra possibilities that it would need to take into account) if it did not know that the earth is round. Of course, since the logical product is commutative, AB = B A, we could interchange A and B in the above statements; i.e. knowledge of A|C and B|AC would serve equally well to determine AB|C = B A|C. That the robot must obtain the same value for AB|C from either procedure is one of our conditions of consistency, desideratum (IIIa). We can state this in a more definite form. (AB|C) will be some function of B|C and A|BC: (AB|C) = F[(B|C), (A|BC)].

(2.1)

Now, if the reasoning we went through here is not completely obvious, let us examine some alternatives. We might suppose, for example, that (AB|C) = F[(A|C), (B|C)]

(2.2)

might be a permissible form. But we can show easily that no relation of this form could satisfy our qualitative conditions of desideratum (II). Proposition A might be very plausible given C, and B might be very plausible given C; but AB could still be very plausible or very implausible. For example, it is quite plausible that the next person you meet has blue eyes and also quite plausible that this person’s hair is black; and it is reasonably plausible that both are true. On the other hand it is quite plausible that the left eye is blue, and quite plausible that the right eye is brown; but extremely implausible that both of those are true. We would have no way of taking such influences into account if we tried to use a formula of this kind. Our robot could not reason the way humans do, even qualitatively, with that kind of functional relation. But other possibilities occur to us. The method of trying out all possibilities – a kind of ‘proof by exhaustion’ – can be organized as follows. Introduce the real numbers u = (AB|C),

v = (A|C),

w = (B|AC),

x = (B|C),

y = (A|BC).

(2.3)

If u is to be expressed as a function of two or more of v, w, x, y, there are 11 possibilities. You can write out each of them, and subject each one to various extreme conditions, as in the brown and blue eyes (which was the abstract statement: A implies that B is false). Other extreme conditions are A = B, A = C, C ⇒ A, etc. Carrying out this somewhat tedious

26

Part 1 Principles and elementary applications

analysis, Tribus (1969) finds that all but two of the possibilities can exhibit qualitative violations of common sense in some extreme case. The two which survive are u = F(x, y) and u = F(w, v), just the two functional forms already suggested by our previous reasoning. We now apply the qualitative requirement discussed in Chapter 1. Given any change in the prior information C → C , such that B becomes more plausible but A does not change, B|C > B|C,

(2.4)

A|BC = A|BC,

(2.5)

common sense demands that AB could only become more plausible, not less: AB|C ≥ AB|C,

(2.6)

with equality if and only if A|BC corresponds to impossibility. Likewise, given prior information C such that B|C = B|C,

(2.7)

A|BC > A|BC,

(2.8)

AB|C ≥ AB|C,

(2.9)

we require that

in which the equality can hold only if B is impossible, given C (for then AB might still be impossible given C , although A|BC is not defined). Furthermore, the function F(x, y) must be continuous; for otherwise an arbitrarily small increase in one of the plausibilities on the right-hand side of (2.1) could result in a large increase in AB|C. In summary, F(x, y) must be a continuous monotonic increasing function of both x and y. If we assume it is differentiable (this is not necessary; see the discussion following (2.13)), then we have F1 (x, y) ≡

∂F ≥0 ∂x

(2.10a)

with equality if and only if y represents impossibility; and also F2 (x, y) ≡

∂F ≥0 ∂y

(2.10b)

with equality permitted only if x represents impossibility. Note for later purposes that, in this notation, Fi denotes differentiation with respect to the ith argument of F, whatever it may be. Next we impose the desideratum (IIIa) of ‘structural’ consistency. Suppose we try to find the plausibility (ABC|D) that three propositions would be true simultaneously. Because of the fact that Boolean algebra is associative: ABC = (AB)C = A(BC), we can do this in two different ways. If the rule is to be consistent, we must get the same result for either

2 The quantitative rules

27

order of carrying out the operations. We can say first that BC will be considered a single proposition, and then apply (2.1): (ABC|D) = F[(BC|D), (A|BC D)],

(2.11)

and then in the plausibility (BC|D) we can again apply (2.1) to give (ABC|D) = F{F[(C|D), (B|C D)], (A|BC D)}.

(2.12a)

But we could equally well have said that AB shall be considered a single proposition at first. From this we can reason out in the other order to obtain a different expression: (ABC|D) = F[(C|D), (AB|C D)] = F{(C|D), F[(B|C D), (A|BC D)]}.

(2.12b)

If this rule is to represent a consistent way of reasoning, the two expressions (2.12a) and (2.12b) must always be the same. A necessary condition that our robot will reason consistently in this case therefore takes the form of a functional equation, F[F(x, y), z] = F[x, F(y, z)].

(2.13)

This equation has a long history in mathematics, starting from the work of N. H. Abel (1826). Acz´el (1966), in his monumental work on functional equations, calls it, very appropriately, ‘The Associativity Equation’, and lists a total of 98 references to works that discuss it or use it. Acz´el derives the general solution (2.27), below, without assuming differentiability; unfortunately, the proof fills 11 pages (pp. 256–267) of his book (see also Acz´el, 1987). We give here the shorter proof by R. T. Cox (1961), which assumes differentiability; see also the discussion in Appendix B. It is evident that (2.13) has a trivial solution, F(x, y) = const. But that violates our monotonicity requirement (2.10), and is in any event useless for our purposes. Unless (2.13) has a nontrivial solution, this approach will fail; so we seek the most general nontrivial solution. Using the abbreviations u ≡ F(x, y),

v ≡ F(y, z),

(2.14)

but still considering (x, y, z) the independent variables, the functional equation to be solved is F(x, v) = F(u, z).

(2.15)

Differentiating with respect to x and y we obtain, in the notation of (2.10), F1 (x, v) = F1 (u, z)F1 (x, y) F2 (x, v)F1 (y, z) = F1 (u, z)F2 (x, y).

(2.16)

Elimination of F1 (u, z) from these equations yields G(x, v)F1 (y, z) = G(x, y)

(2.17)

28

Part 1 Principles and elementary applications

where we use the notation G(x, y) ≡ F2 (x, y)/F1 (x, y). Evidently, the left-hand side of (2.17) must be independent of z. Now, (2.17) can be written equally well as G(x, v)F2 (y, z) = G(x, y)G(y, z),

(2.18)

and denoting the left-hand sides of (2.17), (2.18) by U, V respectively, we verify that ∂ V /∂ y = ∂U/∂z. Thus, G(x, y)G(y, z) must be independent of y. The most general function G(x, y) with this property is G(x, y) = r

H (x) H (y)

(2.19)

where r is a constant and the function H (x) is arbitrary. In the present case, G > 0 by monotonicity of F, and so we require that r > 0, and H (x) may not change sign in the region of interest. Using (2.19), (2.17) and (2.18) become F1 (y, z) =

H (v) H (y)

(2.20)

F2 (y, z) = r

H (v) H (z)

(2.21)

and the relation dv = dF(y, z) = F1 dy + F2 dz takes the form dy dz dv = +r H (v) H (y) H (z)

(2.22)

w[F(y, z)] = w(v) = w(y)wr (z),

(2.23)

or, on integration,

where

w(x) ≡ exp

x

dx . H (x)

(2.24)

The absence of a lower limit on the integral signifies an arbitrary multiplicative factor in w. But taking the function w(·) of (2.15) and applying (2.23), we obtain w(x)wr (v) = w(u)wr (z); applying (2.23) again, our functional equation now reduces to 2

w(x)wr (y)[w(z)]r = w(x)wr (y)wr (z).

(2.25)

Thus we obtain a nontrivial solution only if r = 1, and our final result can be expressed in either of the two forms: w[F(x, y)] = w(x)w(y)

(2.26)

F(x, y) = w −1 [w(x)w(y)].

(2.27)

or

2 The quantitative rules

29

Associativity and commutativity of the logical product thus require that the relation sought must take the functional form w(AB|C) = w(A|BC)w(B|C) = w(B|AC)w(A|C),

(2.28)

which we shall call henceforth the product rule. By its construction (2.24), w(x) must be a positive continuous monotonic function, increasing or decreasing according to the sign of H (x); at this stage it is otherwise arbitrary. The result (2.28) has been derived as a necessary condition for consistency in the sense of desideratum (IIIa). Conversely, it is evident that (2.28) is also sufficient to ensure this consistency for any number of joint propositions. For example, there are an enormous number of different ways in which (ABC D E F G|H ) could be expanded by successive partitions in the manner of (2.12); but if (2.28) is satisfied, they will all yield the same result. The requirements of qualitative correspondence with common sense impose further conditions on the function w(x). For example, in the first given form of (2.28) suppose that A is certain, given C. Then in the ‘logical environment’ produced by knowledge of C, the propositions AB and B are the same, in the sense that one is true if and only if the other is true. By our most primitive axiom of all, discussed in Chapter 1, propositions with the same truth value must have equal plausibility: AB|C = B|C,

(2.29)

A|BC = A|C

(2.30)

and also we will have

because if A is already certain given C (i.e. C implies A), then, given any other information B which does not contradict C, it is still certain. In this case, (2.28) reduces to w(B|C) = w(A|C)w(B|C),

(2.31)

and this must hold no matter how plausible or implausible B is to the robot. So our function w(x) must have the property that certainty is represented by w(A|C) = 1.

(2.32)

Now suppose that A is impossible, given C. Then the proposition AB is also impossible given C: AB|C = A|C,

(2.33)

and if A is already impossible given C (i.e. C implies A), then, given any further information B which does not contradict C, A would still be impossible: A|BC = A|C.

(2.34)

30

Part 1 Principles and elementary applications

In this case, (2.28) reduces to w(A|C) = w(A|C)w(B|C),

(2.35)

and again this equation must hold no matter what plausibility B might have. There are only two possible values of w(A|C) that could satisfy this condition: it could be zero or +∞ (the choice −∞ is ruled out because then by continuity w(B|C) would have to be capable of negative values; (2.35) would then be a contradiction). In summary, qualitative correspondence with common sense requires that w(x) be a positive continuous monotonic function. It may be either increasing or decreasing. If it is increasing, it must range from zero for impossibility up to one for certainty. If it is decreasing, it must range from ∞ for impossibility down to one for certainty. Thus far, our conditions say nothing at all about how it varies between these limits. However, these two possibilities of representation are not different in content. Given any function w1 (x) which is acceptable by the above criteria and represents impossibility by ∞, we can define a new function w2 (x) ≡ 1/w1 (x), which will be equally acceptable and represents impossibility by zero. Therefore, there will be no loss of generality if we now adopt the choice 0 ≤ w(x) ≤ 1 as a convention; that is, as far as content is concerned, all possibilities consistent with our desiderata are included in this form. (As the reader may check, we could just as well have chosen the opposite convention; and the entire development of the theory from this point on, including all its applications, would go through equally well, with equations of a less familiar form but exactly the same content.)

2.2 The sum rule Since the propositions now being considered are of the Aristotelian logical type which must be either true or false, the logical product A A is always false, the logical sum A + A always true. The plausibility that A is false must depend in some way on the plausibility that it is true. If we define u ≡ w(A|B), v ≡ w(A|B), there must exist some functional relation v = S(u).

(2.36)

Evidently, qualitative correspondence with common sense requires that S(u) be a continuous monotonic decreasing function in 0 ≤ u ≤ 1, with extreme values S(0) = 1, S(1) = 0. But it cannot be just any function with these properties, for it must be consistent with the fact that the product rule can be written for either AB or AB: w(AB|C) = w(A|C)w(B|AC)

(2.37)

w(AB|C) = w(A|C)w(B|AC).

(2.38)

Thus, using (2.36) and (2.38), Eq. (2.37) becomes w(AB|C) = w(A|C)S[w(B|AC)] = w(A|C)S

w(AB|C) . w(A|C)

(2.39)

2 The quantitative rules

31

Again, we invoke commutativity: w(AB|C) is symmetric in A, B, and so consistency requires that w(B A|C) w(AB|C) = w(B|C)S . (2.40) w(A|C)S w(A|C) w(B|C) This must hold for all propositions A, B, C; in particular, (2.40) must hold when B = AD,

(2.41)

where D is any new proposition. But then we have the truth values noted before in (1.13): AB = B,

B A = A,

(2.42)

and in (2.40) we may write w(AB|C) = w(B|C) = S[w(B|C)] w(B A|C) = w(A|C) = S[w(A|C)].

(2.43)

Therefore, using the abbreviations x ≡ w(A|C),

y ≡ w(B|C),

(2.25) becomes a functional equation S(x) S(y) = yS , xS x y

0 ≤S(y) ≤ x 0 ≤x ≤ 1

(2.44)

(2.45)

which expresses a scaling property that S(x) must have in order to be consistent with the product rule. In the special case y = 1, this reduces to S[S(x)] = x,

(2.46)

which states that S(x) is a self-reciprocal function; S(x) = S −1 (x). Thus, from (2.36) it follows also that u = S(v). But this expresses only the evident fact that the relationship between A and A is a reciprocal one; it does not matter which proposition we denote by the simple letter, which by the barred letter. We noted this before in (1.8); if it had not been obvious before, we should be obliged to recognize it at this point. The domain of validity given in (2.45) is found as follows. The proposition D is arbitrary, and so by various choices of D we can achieve all values of w(D|AC) in 0 ≤ w(D|AC) ≤ 1.

(2.47)

But S(y) = w(AD|C) = w(A|C)w(D|AC), and so (2.47) is just (0 ≤ S(y) ≤ x), as stated in (2.45). This domain is symmetric in x, y; it can be written equally well with them interchanged. Geometrically, it consists of all points in the x y plane lying in the unit square (0 ≤ x, y ≤ 1) and on or above the curve y = S(x). Indeed, the shape of that curve is determined already by what (2.45) says for points lying infinitesimally above it. For if we set y = S(x) + , then as → 0+ two terms in (2.45) tend to S(1) = 0, but at different rates. Therefore everything depends on the exact way

32

Part 1 Principles and elementary applications

in which S(1 − δ) tends to zero as δ → 0. To investigate this, we define a new variable q(x, y) by S(x) = 1 − exp{−q}. y

(2.48)

Then we may choose δ = exp{−q}, define the function J (q) by S(1 − δ) = S(1 − exp{−q} = exp{−J (q)},

(2.49)

and find the asymptotic form of J (q) as q → ∞. Considering now x, q as the independent variables, we have from (2.48) S(y) = S[S(x)] + exp{−q}S(x)S [S(x)] + O(exp{−2q}).

(2.50)

Using (2.46) and its derivative S [S(x)]S (x) = 1, this reduces to S(y) = 1 − exp{−(α + q)} + O(exp{−2q}), x where

α(x) ≡ log

−x S (x) > 0. S(x)

(2.51)

(2.52)

With these substitutions, our functional equation (2.45) becomes x + log(1 − exp{−q}) + O(exp{−2q}), J (q + α) − J (q) = log S(x)

0 M. The probability for white on the first w draws is similar but for the interchange of M and (N − M): P(W1 W2 · · · Ww |B) =

(N − M)!(N − w)! . (N − M − w)!N !

(3.13)

Then, the probability for white on draws (r + 1, r + 2, . . . , r + w) given that we got red on the first r draws, is given by (3.13), taking into account that N and M have been reduced to (N − r ) and (M − r ), respectively: P(Wr +1 · · · Wr +w |R1 · · · Rr B) =

(N − M)!(N − r − w)! , (N − M − w)!(N − r )!

(3.14)

54

Part 1 Principles and elementary applications

and so, by the product rule, the probability for obtaining r red followed by w = n − r white in n draws is, from (3.12) and (3.14), P(R1 · · · Rr Wr +1 · · · Wn |B) =

M!(N − M)!(N − n)! , (M − r )!(N − M − w)!N !

(3.15)

a term (N − r )! having cancelled out. Although this result was derived for a particular order of drawing red and white balls, the probability for drawing exactly r red balls in any specified order in n draws is the same. To see this, write out the expression (3.15) more fully, in the manner M! = M(M − 1) · · · (M − r + 1) (M − r )!

(3.16)

and similarly for the other ratios of factorials in (3.15). The right-hand side becomes M(M − 1) · · · (M − r + 1)(N − M)(N − M − 1) · · · (N − M − w + 1) . N (N − 1) · · · (N − n + 1)

(3.17)

Now suppose that r red and (n − r ) = w white are drawn, in any other order. The probability for this is the product of n factors; every time red is drawn there is a factor (number of red balls in urn)/(total number of balls), and similarly for drawing a white one. The number of balls in the urn decreases by one at each draw; therefore for the kth draw a factor (N − k + 1) appears in the denominator, whatever the colors of the previous draws. Just before the kth red ball is drawn, whether this occurs at the kth draw or any later one, there are (M − k + 1) red balls in the urn; thus, drawing the kth one places a factor (M − k + 1) in the numerator. Just before the kth white ball is drawn, there are (N − M − k + 1) white balls in the urn, and so drawing the kth white one places a factor (N − M − k + 1) in the numerator, regardless of whether this occurs at the kth draw or any later one. Therefore, by the time all n balls have been drawn, of which r were red, we have accumulated exactly the same factors in numerator and denominator as in (3.17); different orders of drawing them only permute the order of the factors in the numerator. The probability for drawing exactly r balls in any specified order in n draws is therefore given by (3.15). Note carefully that in this result the product rule was expanded in a particular way that showed us how to organize the calculation into a product of factors, each of which is a probability at one specified draw, given the results of all the previous draws. But the product rule could have been expanded in many other ways, which would give factors conditional on other information than the previous draws; the fact that all these calculations must lead to the same final result is a nontrivial consistency property, which the derivations of Chapter 2 sought to ensure. Next, we ask: What is the robot’s probability for drawing exactly r red balls in n draws, regardless of order? Different orders of appearance of red and white balls are mutually exclusive possibilities, so we must sum over all of them; but since each term is equal to (3.15), we merely multiply it by the binomial coefficient

n n! , (3.18) = r !(n − r )! r

3 Elementary sampling theory

55

which represents the number of possible orders of drawing r red balls in n draws, or, as we shall call it, the multiplicity of the event r . For example, to get three red in three draws can happen in only

3 =1 (3.19) 3 way, namely R1 R2 R3 ; the event r = 3 has a multiplicity of 1. But to get two red in three draws can happen in

3 =3 (3.20) 2 ways, namely R1 R2 W3 , R1 W2 R3 , W1 R2 R3 , so the event r = 2 has a multiplicity of 3.

Exercise 3.1. Why isn’t the multiplicity factor (3.18) just n!? After all, we started this discussion by stipulating that the balls, in addition to having colors, also carry labels (1, 2, . . . , N ), so that different permutations of the red balls among themselves, which give the r ! in the denominator of (3.18), are distinguishable arrangements. Hint: In (3.15) we are not specifying which red balls and which white ones are to be drawn. Taking the product of (3.15) and (3.18), the many factorials can be reorganized into three binomial coefficients. Defining A ≡ ‘Exactly r red balls in n draws, in any order’ and the function

we have

h(r |N , M, n) ≡ P(A|B),

(3.21)

M N−M r n −r

, h(r |N , M, n) = N n

(3.22)

which we shall usually abbreviate to h(r ). By the convention x! = (x + 1) it vanishes automatically when r > M, or r > n, or (n − r ) > (N − M), as it should. We are here doing a little notational acrobatics for reasons explained in Appendix B. The point is that in our formal probability symbols P(A|B) with the capital P, the arguments A, B always stand for propositions, which can be quite complicated verbal statements. If we wish to use ordinary numbers for arguments, then for consistency we should define new functional symbols such as h(r |N , M, n). Attempts to try to use a notation like P(r |N Mn), thereby losing sight of the qualitative stipulations contained in A and B, have led to serious errors from misinterpretation of the equations (such as the marginalization paradox discussed later). However, as already indicated in Chapter 2, we follow the custom of most contemporary works by using probability symbols of the form p(A|B), or p(r |n) with small

56

Part 1 Principles and elementary applications

p, in which we permit the arguments to be either propositions or algebraic variables; in this case, the meaning must be judged from the context. The fundamental result (3.22) is called the hypergeometric distribution because it is related to the coefficients in the power series representation of the Gauss hypergeometric function ∞ (a + r )(b + r )(c) t r . (3.23) F(a, b, c; t) = (a)(b)(c + r ) r ! r =0 If either a or b is a negative integer, the series terminates and this is a polynomial. It is easily verified that the generating function G(t) ≡

n

h(r |N , M, n)t r

(3.24)

F(−M, −n, c; t) , F(−M, −n, c; 1)

(3.25)

r =0

is equal to G(t) =

with c = N − M − n + 1. The evident relation G(1) = 1 is, from (3.24), just the statement that the hypergeometric distribution is correctly normalized. In consequence of (3.25), G(t) satisfies the second-order hypergeometric differential equation and has many other properties useful in calculations. Although the hypergeometric distribution h(r ) appears complicated, it has some surprisingly simple properties. The most probable value of r is found to within one unit by setting h(r ) = h(r − 1) and solving for r . We find r =

(n + 1)(M + 1) . N +2

(3.26)

If r is an integer, then r and r − 1 are jointly the most probable values. If r is not an integer, then there is a unique most probable value rˆ = INT(r ),

(3.27)

that is, the next integer below r . Thus, the most probable fraction f = r/n of red balls in the sample drawn is nearly equal to the fraction F = M/N originally in the urn, as one would expect intuitively. This is our first crude example of a physical prediction: a relation between a quantity F specified in our information and a quantity f measurable in a physical experiment derived from the theory. The width of the distribution h(r ) gives an indication of the accuracy with which the robot can predict r . Many such questions are answered by calculating the cumulative probability distribution, which is the probability for finding R or fewer red balls. If R is an integer, this is H (R) ≡

R r =0

h(r ),

(3.28)

3 Elementary sampling theory

57

but for later formal reasons we define H (x) to be a staircase function for all non-negative real x; thus H (x) ≡ H (R), where R = INT(x) is the greatest integer ≤x. The median of a probability distribution such as h(r ) is defined to be a number m such that equal probabilities are assigned to the propositions (r < m) and (r > m). Strictly speaking, according to this definition a discrete distribution has in general no median. If there is an integer R for which H (R − 1) = 1 − H (R) and H (R) > H (R − 1), then R is the unique median. If there is an integer R for which H (R) = 1/2, then any r in (R ≤ r < R ) is a median, where R is the next higher jump point of H (x); otherwise there is none. But for most purposes we may take a more relaxed attitude and approximate the strict definition. If n is reasonably large, then it makes reasonably good sense to call that value of R for which H (R) is closest to 1/2, the ‘median’. In the same relaxed spirit, the values of R for which H (R) is closest to 1/4, 3/4, may be called the ‘lower quartile’ and ‘upper quartile’, respectively, and if n 10 we may call the value of R for which H (R) is closest to k/10 the ‘kth decile’, and so on. As n → ∞, these loose definitions come into conformity with the strict one. Usually, the fine details of H (R) are unimportant, and for our purposes it is sufficient to know the median and the quartiles. Then the (median) ± (interquartile distance) will provide a good enough idea of the robot’s prediction and its probable accuracy. That is, on the information given to the robot, the true value of r is about as likely to lie in this interval as outside it. Likewise, the robot assigns a probability of (5/6) − (1/6) = 2/3 (in other words, odds of 2 : 1) that r lies between the first and fifth hexile, odds of 8 : 2 = 4 : 1 that it is bracketed by the first and ninth decile, and so on. Although one can develop rather messy approximate formulas for these distributions which were much used in the past, it is easier today to calculate the exact distribution by computer. For example W. H. Press et al. (1986) list two routines that will calculate the generalized complex hypergeometric distribution for any values of a, b and c. Tables 3.1 and 3.2 give the hypergeometric distribution for N = 100, M = 50, n = 10, and N = 100, M = 10, n = 50, respectively. In the latter case, it is not possible to draw more than ten red balls, so the entries for r > 10 are all h(r ) = 0, H (r ) = 1, and are not tabulated. One is struck immediately by the fact that the entries for positive h(r ) are identical; the hypergeometric distribution has the symmetry property h(r |N , M, n) = h(r |N , n, M)

(3.29)

under interchange of M and n. Whether we draw ten balls from an urn containing 50 red ones, or 50 from an urn containing ten red ones, the probability for finding r red ones in the sample drawn is the same. This is readily verified by closer inspection of (3.22), and it is evident from the symmetry in a, b of the hypergeometric function (3.23). Another symmetry evident from Tables 3.1 and 3.2 is the symmetry of the distribution about its peak: h(r |100, 50, 10) = h(10 − r |100, 50, 10). However, this is not so in general; changing N to 99 results in a slightly unsymmetrical peak, as we see from Table 3.3. The symmetric peak in Table 3.1 arises as follows: if we interchange M and (N − M) and at the same time interchange r and (n − r ) we have in effect only interchanged the words ‘red’

58

Part 1 Principles and elementary applications

Table 3.1. Hypergeometric distribution; N , M, n = 100, 10, 50. r

h(r )

H (r )

0 1 2 3 4 5 6 7 8 9 10

0.000593 0.007237 0.037993 0.113096 0.211413 0.259334 0.211413 0.113096 0.037993 0.007237 0.000593

0.000593 0.007830 0.045824 0.158920 0.370333 0.629667 0.841080 0.954177 0.992170 0.999407 1.000000

Table 3.2. Hypergeometric distribution; N , M, n = 100, 50, 10. r

h(r )

H (r )

0 1 2 3 4 5 6 7 8 9 10

0.000593 0.007237 0.037993 0.113096 0.211413 0.259334 0.211413 0.113096 0.037993 0.007237 0.000593

0.000593 0.007830 0.045824 0.158920 0.370333 0.629667 0.841080 0.954177 0.992170 0.999407 1.000000

and ‘white’, so the distribution is unchanged: h(n − r |N , N − M, n) = h(r |N , M, n).

(3.30)

But when M = N /2, this reduces to the symmetry h(n − r |N , M, n) = h(r |N , M, n) observed in Table 3.1. By (3.29) the peak must be symmetric also when n = N /2.

(3.31)

3 Elementary sampling theory

59

Table 3.3. Hypergeometric distribution; N , M, n = 99, 50, 10. r

h(r )

H (r )

0 1 2 3 4 5 6 7 8 9 10

0.000527 0.006594 0.035460 0.108070 0.206715 0.259334 0.216111 0.118123 0.040526 0.007880 0.000659

0.000527 0.007121 0.042581 0.150651 0.357367 0.616700 0.832812 0.950934 0.991461 0.999341 1.000000

The hypergeometric distribution has two more symmetries not at all obvious intuitively or even visible in (3.22). Let us ask the robot for its probability P(R2 |B) of red on the second draw. This is not the same calculation as (3.8), because the robot knows that, just prior to the second draw, there are only (N − 1) balls in the urn, not N . But it does not know what color of ball was removed on the first draw, so it does not know whether the number of red balls now in the urn is M or (M − 1). Then the basis for the Bernoulli urn result (3.5) is lost, and it might appear that the problem is indeterminate. Yet it is quite determinate after all; the following is our first example of one of the useful techniques in probability calculations, which derives from the resolution of a proposition into disjunctions of simpler ones, as discussed in Chapters 1 and 2. The robot knows that either R1 or W1 is true; therefore using Boolean algebra we have R2 = (R1 + W1 )R2 = R1 R2 + W1 R2 .

(3.32)

We apply the sum rule and the product rule to get P(R2 |B) = P(R1 R2 |B) + P(W1 R2 |B) = P(R2 |R1 B)P(R1 |B) + P(R2 |W1 B)P(W1 |B).

(3.33)

But P(R2 |R1 B) =

M −1 , N −1

P(R2 |W1 B) =

M , N −1

(3.34)

and so P(R2 |B) =

M N−M M M −1 M + = . N −1 N N −1 N N

(3.35)

60

Part 1 Principles and elementary applications

The complications cancel out, and we have the same probability for red on the first and second draws. Let us see whether this continues. For the third draw we have R3 = (R1 + W1 )(R2 + W2 )R3 = R1 R2 R3 + R1 W2 R3 + W1 R2 R3 + W1 W2 R3 ,

(3.36)

and so P(R3 |B) =

M N −M M −1 M M −1 M −2 + N N −1 N −2 N N −1 N −2

+

N −M N −M −1 M N −M M M −1 + N N −1 N −2 N N −1 N −2

=

M . N

(3.37)

Again all the complications cancel out. The robot’s probability for red at any draw, if it does not know the result of any other draw, is always the same as the Bernoulli urn result (3.5). This is the first nonobvious symmetry. We shall not prove this in generality here, because it is contained as a special case of a still more general result; see Eq. (3.118) below. The method of calculation illustrated by (3.32) and (3.36) is as follows: resolve the quantity whose probability is wanted into mutually exclusive subpropositions, then apply the sum rule and the product rule. If the subpropositions are well chosen (i.e. if they have some simple meaning in the context of the problem), their probabilities are often calculable. If they are not well chosen (as in the example of the penguins at the end of Chapter 2), then of course this procedure cannot help us.

3.2 Logic vs. propensity The results of Section 3.1 present us with a new question. In finding the probability for red at the kth draw, knowledge of what color was found at some earlier draw is clearly relevant because an earlier draw affects the number Mk of red balls in the urn for the kth draw. Would knowledge of the color for a later draw be relevant? At first glance, it seems that it could not be, because the result of a later draw cannot influence the value of Mk . For example, a well-known exposition of statistical mechanics (Penrose, 1979) takes it as a fundamental axiom that probabilities referring to the present time can depend only on what happened earlier, not on what happens later. The author considers this to be a necessary physical condition of ‘causality’. Therefore we stress again, as we did in Chapter 1, that inference is concerned with logical connections, which may or may not correspond to causal physical influences. To show why knowledge of later events is relevant to the probabilities of earlier ones, consider an urn which is known (background information B) to contain only one red and one white ball: N = 2, M = 1. Given only this information, the probability for red on the first draw is P(R1 |B) = 1/2. But then if the robot learns that red occurs on the second draw, it becomes

3 Elementary sampling theory

61

certain that it did not occur on the first: P(R1 |R2 B) = 0.

(3.38)

More generally, the product rule gives us P(R j Rk |B) = P(R j |Rk B)P(Rk |B) = P(Rk |R j B)P(R j |B).

(3.39)

But we have just seen that P(R j |B) = P(Rk |B) = M/N for all j, k, so P(R j |Rk B) = P(Rk |R j B),

all j, k.

(3.40)

Probability theory tells us that the results of later draws have precisely the same relevance as do the results of earlier ones! Even though performing the later draw does not physically affect the number Mk of red balls in the urn at the kth draw, information about the result of a later draw has the same effect on our state of knowledge about what could have been taken on the kth draw, as does information about an earlier one. This is our second nonobvious symmetry. This result will be quite disconcerting to some schools of thought about the ‘meaning of probability’. Although it is generally recognized that logical implication is not the same as physical causation, nevertheless there is a strong inclination to cling to the idea anyway, by trying to interpret a probability P(A|B) as expressing some kind of partial causal influence of B on A. This is evident not only in the aforementioned work of Penrose, but more strikingly in the ‘propensity’ theory of probability expounded by the philosopher Karl Popper.1 It appears to us that such a relation as (3.40) would be quite inexplicable from a propensity viewpoint, although the simple example (3.38) makes its logical necessity obvious. In any event, the theory of logical inference that we are developing here differs fundamentally, in outlook and in results, from the theory of physical causation envisaged by Penrose and Popper. It is evident that logical inference can be applied in many problems where assumptions of physical causation would not make sense. This does not mean that we are forbidden to introduce the notion of ‘propensity’ or physical causation; the point is rather that logical inference is applicable and useful whether or not a propensity exists. If such a notion (i.e. that some such propensity exists) is formulated as a well-defined hypothesis, then our form of probability theory can analyze its implications. We shall do this in Section 3.10 below. Also, we can test that hypothesis against alternatives 1

In his presentation at the Ninth Colston Symposium, Popper (1957) describes his propensity interpretation as ‘purely objective’ but avoids the expression ‘physical influence’. Instead, he would say that the probability for a particular face in tossing a die is not a physical property of the die (as Cram´er (1946) insisted), but rather is an objective property of the whole experimental arrangement, the die plus the method of tossing. Of course, that the result of the experiment depends on the entire arrangement and procedure is only a truism. It was stressed repeatedly by Niels Bohr in connection with quantum theory, but presumably no scientist from Galileo on has ever doubted it. However, unless Popper really meant ‘physical influence’, his interpretation would seem to be supernatural rather than objective. In a later article (Popper, 1959) he defines the propensity interpretation more completely; now a propensity is held to be ‘objective’ and ‘physically real’ even when applied to the individual trial. In the following we see by mathematical demonstration some of the logical difficulties that result from a propensity interpretation. Popper complains that in quantum theory one oscillates between ‘. . . an objective purely statistical interpretation and a subjective interpretation in terms of our incomplete knowledge’, and thinks that the latter is reprehensible and the propensity interpretation avoids any need for it. He could not possibly be more mistaken. In Chapter 9 we answer this in detail at the conceptual level; obviously, incomplete knowledge is the only working material a scientist has! In Chapter 10 we consider the detailed physics of coin tossing, and see just how the method of tossing affects the results by direct physical influence.

62

Part 1 Principles and elementary applications

in the light of the evidence, just as we can test any well-defined hypothesis. Indeed, one of the most common and important applications of probability theory is to decide whether there is evidence for a causal influence: is a new medicine more effective, or a new engineering design more reliable? Does a new anticrime law reduce the incidence of crime? Our study of hypothesis testing starts in Chapter 4. In all the sciences, logical inference is more generally applicable. We agree that physical influences can propagate only forward in time; but logical inferences propagate equally well in either direction. An archaeologist uncovers an artifact that changes his knowledge of events thousands of years ago; were it otherwise, archaeology, geology, and paleontology would be impossible. The reasoning of Sherlock Holmes is also directed to inferring, from presently existing evidence, what events must have transpired in the past. The sounds reaching your ears from a marching band 600 meters distant change your state of knowledge about what the band was playing two seconds earlier. Listening to a Toscanini recording of a Beethoven symphony changes your state of knowledge about the sounds Toscanini elicited from his orchestra many years ago. As this suggests, and as we shall verify later, a fully adequate theory of nonequilibrium phenomena, such as sound propagation, also requires that backward logical inferences be recognized and used, although they do not express physical causes. The point is that the best inferences we can make about any phenomenon – whether in physics, biology, economics, or any other field – must take into account all the relevant information we have, regardless of whether that information refers to times earlier or later than the phenomenon itself; this ought to be considered a platitude, not a paradox. At the end of this chapter (Exercise 3.6), the reader will have an opportunity to demonstrate this directly, by calculating a backward inference that takes into account a forward causal influence. More generally, consider a probability distribution p(x1 · · · xn |B), where xi denotes the result of the ith trial, and could take on not just two values (red or white) but, say, the values xi = (1, 2, . . . , k) labeling k different colors. If the probability is invariant under any permutation of the xi , then it depends only on the sample numbers (n 1 · · · n k ) denoting how many times the result xi = 1 occurs, how many times xi = 2 occurs, etc. Such a distribution is called exchangeable; as we shall find later, exchangeable distributions have many interesting mathematical properties and important applications. Returning to our urn problem, it is clear already from the fact that the hypergeometric distribution is exchangeable that every draw must have just the same relevance to every other draw, regardless of their time order and regardless of whether they are near or far apart in the sequence. But this is not limited to the hypergeometric distribution; it is true of any exchangeable distribution (i.e. whenever the probability for a sequence of events is independent of their order). So, with a little more thought, these symmetries, so inexplicable from the standpoint of physical causation, become obvious after all as propositions of logic. Let us calculate this effect quantitatively. Supposing j < k, the proposition R j Rk (red at both draws j and k) is in Boolean algebra the same as R j Rk = (R1 + W1 ) · · · (R j−1 + W j−1 ) R j (R j+1 + W j+1 ) · · · (Rk−1 + Wk−1 )Rk , (3.41)

3 Elementary sampling theory

63

which we could expand in the manner of (3.36) into a logical sum of 2 j−1 × 2k− j−1 = 2k−2

(3.42)

propositions, each specifying a full sequence, such as W1 R 2 W3 · · · R j · · · R k

(3.43)

of k results. The probability P(R j Rk |B) is the sum of all their probabilities. But we know that, given B, the probability for any one sequence is independent of the order in which red and white appear. Therefore we can permute each sequence, moving R j to the first position, and Rk to the second. That is, we can replace the sequence (W1 · · · R j · · ·) by (R1 · · · W j · · ·), etc. Recombining them, we have (R1 R2 ) followed by every possible result for draws (3, 4, . . . , k). In other words, the probability for R j Rk is the same as that of R1 R2 (R3 + W3 ) · · · (Rk + Wk ) = R1 R2 ,

(3.44)

and we have P(R j Rk |B) = P(R1 R2 |B) =

M(M − 1) , N (N − 1)

(3.45)

P(W j Rk |B) = P(W1 R2 |B) =

(N − M)M . N (N − 1)

(3.46)

and likewise

Therefore by the product rule P(Rk |R j B) =

P(R j Rk |B) M −1 = P(R j |B) N −1

(3.47)

P(Rk |W j B) =

P(W j Rk |B) M = P(W j |B) N −1

(3.48)

and

for all j < k. By (3.40), the results (3.47) and (3.48) are true for all j = k. Since as noted this conclusion appears astonishing to many people, we shall belabor the point by explaining it still another time in different words. The robot knows that the urn originally contained M red balls and (N − M) white ones. Then, learning that an earlier draw gave red, it knows that one less red ball is available for the later draws. The problem becomes the same as if we had started with an urn of (N − 1) balls, of which (M − 1) are red; (3.47) corresponds just to the solution (3.37) adapted to this different problem. But why is knowing the result of a later draw equally cogent? Because if the robot knows that red will be drawn at any later time, then in effect one of the red balls in the urn must be ‘set aside’ to make this possible. The number of red balls which could have been taken in earlier draws is reduced by one, as a result of having this information. The above example (3.38) is an extreme special case of this, where the conclusion is particularly obvious.

64

Part 1 Principles and elementary applications

3.3 Reasoning from less precise information Now let us try to apply this understanding to a more complicated problem. Suppose the robot learns that red will be found at least once in later draws, but not at which draw or draws this will occur. That is, the new information is, as a proposition of Boolean algebra, Rlater ≡ Rk+1 + Rk+2 + · · · + Rn .

(3.49)

This information reduces the number of red available for the kth draw by at least one, but it is not obvious whether Rlater has exactly the same implications as does Rn . To investigate this we appeal again to the symmetry of the product rule: P(Rk Rlater |B) = P(Rk |Rlater B)P(Rlater |B) = P(Rlater |Rk B)P(Rk |B),

(3.50)

which gives us P(Rk |Rlater B) = P(Rk |B)

P(Rlater |Rk B) , P(Rlater |B)

(3.51)

and all quantities on the right-hand side are easily calculated. Seeing (3.49), one might be tempted to reason as follows: P(Rlater |B) =

n

P(R j |B),

(3.52)

j=k+1

but this is not correct because, unless M = 1, the events R j are not mutually exclusive, and, as we see from (2.82), many more terms would be needed. This method of calculation would be very tedious. To organize the calculation better, note that the denial of Rlater is the statement that white occurs at all the later draws: R later = Wk+1 Wk+2 · · · Wn .

(3.53)

So P(R later |B) is the probability for white at all the later draws, regardless of what happens at the earlier ones (i.e. when the robot does not know what happens at the earlier ones). By exchangeability this is the same as the probability for white at the first (n − k) draws, regardless of what happens at the later ones; from (3.13), (N − M)!(N − n + k)! = P(R later |B) = N !(N − M − n + k)!

N−M n−k

N n−k

−1

.

(3.54)

Likewise, P(R later |Rk B) is the same result for the case of (N − 1) balls, (M − 1) of which are red:

N − 1 −1 N−M (N − M)! (N − n + k − 1)! . (3.55) = P(R later |Rk B) = n−k n−k (N − 1)! (N − M − n + k)!

3 Elementary sampling theory

Now (3.51) becomes

65

N −1 N−M − M n−k n−k

. × P(Rk |Rlater B) = N N−M N −n+k − n−k n−k

(3.56)

As a check, note that if n = k + 1, this reduces to (M − 1)/(N − 1), as it should. At the moment, however, our interest in (3.56) is not so much in the numerical values, but in understanding the logic of the result. So let us specialize it to the simplest case that is not entirely trivial. Suppose we draw n = 3 times from an urn containing N = 4 balls, M = 2 of which are white, and ask how knowledge that red occurs at least once on the second and third draws affects the probability for red at the first draw. This is given by (3.56) with N = 4, M = 2, n = 3, k = 1:

2 1 1 − 1/3 6−2 = = , (3.57) P(R1 |R2 + R3 , B) = 12 − 2 5 2 1 − 1/6 the last form corresponding to (3.51). Compare this to the previously calculated probabilities: P(R1 |B) =

1 , 2

P(R1 |R2 B) = P(R2 |R1 B) =

1 . 3

(3.58)

What seems surprising is that P(R1 |Rlater B) > P(R1 |R2 B).

(3.59)

Most people guess at first that the inequality should go the other way; i.e. knowing that red occurs at least once on the later draws ought to decrease the chances of red at the first draw more than does the information R2 . But in this case the numbers are so small that we can check the calculation (3.51) directly. To find P(Rlater |B) by the extended sum rule (2.82) now requires only one extra term: P(Rlater |B) = P(R2 |B) + P(R3 |B) − P(R2 R3 |B) 5 1 1 1 1 = + − × = . 2 2 2 3 6

(3.60)

We could equally well resolve Rlater into mutually exclusive propositions and calculate P(Rlater |B) = P(R2 W3 |B) + P(W2 R3 |B) + P(R2 R3 |B) 5 1 2 1 2 1 1 = × + × + × = . 2 3 2 3 2 3 6

(3.61)

The denominator (1 − 1/6) in (3.57) has now been calculated in three different ways, with the same result. If the three results were not the same, we would have found an inconsistency in our rules, of the kind we sought to prevent by Cox’s functional equation arguments in Chapter 2. This is a good example of what ‘consistency’ means in practice, and it shows the trouble we would be in if our rules did not have it.

66

Part 1 Principles and elementary applications

Likewise, we can check the numerator of (3.51) by an independent calculation: P(Rlater |R1 B) = P(R2 |R1 B) + P(R3 |R1 B) − P(R2 R3 |R1 B) 2 1 1 1 = + − ×0= , 3 3 3 3

(3.62)

and the result (3.57) is confirmed. So we have no choice but to accept the inequality (3.59) and try to understand it intuitively. Let us reason as follows. The information R2 reduces the number of red balls available for the first draw by one, and it reduces the number of balls in the urn available for the first draw by one, giving P(R1 |R2 B) = (M − 1)/(N − 1) = 1/3. The information Rlater reduces the ‘effective number of red balls’ available for the first draw by more than one, but it reduces the number of balls in the urn available for the first draw by two (because it assures the robot that there are two later draws in which two balls are removed). So let us try tentatively to interpret the result (3.57) as P(R1 |Rlater B) =

(M)eff , N −2

(3.63)

although we are not quite sure what this means. Given Rlater , it is certain that at least one red ball is removed, and the probability that two are removed is, by the product rule: P(R2 R3 |Rlater B) =

P(R2 R3 |B) P(R2 R3 Rlater |B) = P(Rlater |B) P(Rlater |B)

1 (1/2) × (1/3) = = 5/6 5

(3.64)

because R2 R3 implies Rlater ; i.e. a relation of Boolean algebra is (R2 R3 Rlater = R2 R3 ). Intuitively, given Rlater there is probability 1/5 that two red balls are removed, so the effective number removed is 1 + (1/5) = 6/5. The ‘effective’ number remaining for draw one is 4/5. Indeed, (3.63) then becomes P(R1 |Rlater B) =

2 4/5 = , 2 5

(3.65)

in agreement with our better motivated, but less intuitive, calculation (3.57).

3.4 Expectations Another way of looking at this result appeals more strongly to our intuition and generalizes far beyond the present problem. We can hardly suppose that the reader is not already familiar with the idea of expectation, but this is the first time it has appeared in the present work, so we pause to define it. If a variable quantity X can take on the particular values (x1 , . . . , xn ) in n mutually exclusive and exhaustive situations, and the robot assigns corresponding probabilities ( p1 , p2 , . . . , pn ) to them, then the quantity X = E(X ) =

n i=1

pi xi

(3.66)

3 Elementary sampling theory

67

is called the expectation (in the older literature, mathematical expectation or expectation value) of X . It is a weighted average of the possible values, weighted according to their probabilities. Statisticians and mathematicians generally use the notation E(X ); but physicists, having already pre-empted E to stand for energy and electric field, use the bracket notation X . We shall use both notations here; they have the same meaning, but sometimes one is easier to read than the other. Like most of the standard terms that arose out of the distant past, the term ‘expectation’ seems singularly inappropriate to us; for it is almost never a value that anyone ‘expects’ to find. Indeed, it is often known to be an impossible value. But we adhere to it because of centuries of precedent. Given Rlater , what is the expectation of the number of red balls in the urn for draw number one? There are three mutually exclusive possibilities compatible with Rlater : R 2 W3 , W2 R 3 , R 2 R 3

(3.67)

for which M is (1, 1, 0), respectively, and for which the probabilities are as in (3.64) and (3.65): (1/2) × (2/3) 2 P(R2 W3 |B) = = , P(Rlater |B) (5/6) 5

(3.68)

P(W2 R3 |Rlater B) =

2 , 5

(3.69)

P(R2 R3 |Rlater B) =

1 . 5

(3.70)

P(R2 W3 |Rlater B) =

So M = 1 ×

2 1 4 2 +1× +0× = . 5 5 5 5

(3.71)

Thus, what we called intuitively the ‘effective’ value of M in (3.63) is really the expectation of M. We can now state (3.63) in a more cogent way: when the fraction F = M/N of red balls is known, then the Bernoulli urn rule applies and P(R1 |B) = F. When F is unknown, the probability for red is the expectation of F: P(R1 |B) = F ≡ E(F).

(3.72)

If M and N are both unknown, the expectation is over the joint probability distribution for M and N . That a probability is numerically equal to the expectation of a fraction will prove to be a general rule that holds as well in thousands of far more complicated situations, providing one of the most useful and common rules for physical prediction. We leave it as an exercise for the reader to show that the more general result (3.56) can also be calculated in the way suggested by (3.72).

68

Part 1 Principles and elementary applications

3.5 Other forms and extensions The hypergeometric distribution (3.22) can be written in various ways. The nine factorials can be organized into binomial coefficients also as follows:

n N −n r M −r

. (3.73) h(r |N , M, n) = N M But the symmetry under exchange of M and n is still not evident; to see it we must write out (3.22) or (3.73) in full, displaying all the individual factorials. We may also rewrite (3.22), as an aid to memory, in a more symmetric form: the probability for drawing exactly r red balls and w white ones in n = r + w draws, from an urn containing R red and W white, is

R W r w

, (3.74) h(r ) = R+W r +w and in this form it is easily generalized. Suppose that, instead of only two colors, there are k different colors of balls in the urn, N1 of color 1, N2 of color 2, . . . , Nk of color k. The probability for drawing r1 balls of color 1, r2 of color 2, . . . , rk of color k in n = ri draws is, as the reader may verify, the generalized hypergeometric distribution:

N1 Nk ··· r1 r k . (3.75) h(r1 · · · rk |N1 · · · Nk ) = Ni ri

3.6 Probability as a mathematical tool From the result (3.75) one may obtain a number of identities obeyed by the binomial coefficients. For example, we may decide not to distinguish between colors 1 and 2; i.e. a ball of either color is declared to have color ‘a’. Then from (3.75) we must have, on the one hand,

Na N3 Nk ··· ra r3 rk

(3.76) h(ra , r3 , . . . , rk |Na , N3 , . . . , Nk ) = Ni ri with Na = N1 + N2 ,

ra = r1 + r2 .

(3.77)

3 Elementary sampling theory

69

But the event ra can occur for any values of r1 , r2 satisfying (3.77), and so we must have also, on the other hand, h(ra , r3 , . . . , rk |Na , N3 , . . . , Nk ) =

ra

h(r1 , ra − r1 , r3 , . . . , rk |N1 , . . . , Nk ).

(3.78)

r1 =0

Then, comparing (3.76) and (3.78), we have the identity

Na ra

=

ra N1 N2 . r1 ra − r1 r1 =0

(3.79)

Continuing in this way, we can derive a multitude of more complicated identities obeyed by the binomial coefficients. For example,

N1 + N2 + N3 ra

=

ra r1 N1 N2 r1 =0 r2 =0

r1

r2

N3 . ra − r1 − r2

(3.80)

In many cases, probabilistic reasoning is a powerful tool for deriving purely mathematical results; more examples of this are given by Feller (1950, Chap. 2 & 3) and in later chapters of the present work.

3.7 The binomial distribution Although somewhat complicated mathematically, the hypergeometric distribution arises from a problem that is very clear and simple conceptually; there are only a finite number of possibilities and all the above results are exact for the problems as stated. As an introduction to a mathematically simpler, but conceptually far more difficult, problem, we examine a limiting form of the hypergeometric distribution. The complication of the hypergeometric distribution arises because it is taking into account the changing contents of the urn; knowing the result of any draw changes the probability for red for any other draw. But if the number N of balls in the urn is very large compared with the number drawn (N n), then this probability changes very little, and in the limit N → ∞ we should have a simpler result, free of such dependencies. To verify this, we write the hypergeometric distribution (3.22) as

1 N−M 1 M Nr r N n−r n − r . (3.81) h(r |N , M, n) = 1 N Nn n The first factor is

1 M 2 M r −1 1 M M 1 M − − − · · · , = Nr r r! N N N N N N N

(3.82)

70

Part 1 Principles and elementary applications

and in the limit N → ∞, M → ∞, M/N → f , we have

fr 1 M . → Nr r r!

(3.83)

Likewise,

1 N n−r

M −1 (1 − f )n−r , → (n − r )! n −r

(3.84)

1 N 1 → . n N n n!

(3.85)

In principle, we should, of course, take the limit of the product in (3.81), not the product of the limits. But in (3.81) we have defined the factors so that each has its own independent limit, so the result is the same; the hypergeometric distribution goes into

n r (3.86) h(r |N , M, n) → b(r |n, f ) ≡ f (1 − f )n−r r called the binomial distribution, because evaluation of the generating function (3.24) now reduces to n b(r |n, f )t r = (1 − f + f t)n , (3.87) G(t) ≡ r =0

an example of Newton’s binomial theorem. Figure 3.1 compares three hypergeometric distributions with N = 15, 30, 100 and M/N = 0.4, n = 10 to the binomial distribution with n = 10, f = 0.4. All have their peak 0.5 15

0.4 P R O B 0.3 A B I L 0.2 I T Y 0.1

30 100 ∞

0.0 1

2

3

4

5 r

6

7

8

↓

0

Fig. 3.1. The hypergeometric distribution for N = 15, 30, 100, ∞.

9

3 Elementary sampling theory

71

at r = 4, and all distributions have the same first moment r = E(r ) = 4, but the binomial distribution is broader. The N = 15 hypergeometric distribution is zero for r = 0 and r > 6, since on drawing ten balls from an urn containing only six red and nine white, it is not possible to get fewer than one or more than six red balls. When N > 100 the hypergeometric distribution agrees so closely with the binomial that for most purposes it would not matter which one we used. Analytical properties of the binomial distribution are collected in Chapter 7. In Chapter 9 we find, in connection with significance tests, situations where the binomial distribution is exact for purely combinatorial reasons in a finite sample space, Eq. (9.46). We can carry out a similar limiting process on the generalized hypergeometric distribution (3.75). It is left as an exercise to show that in the limit where all Ni → ∞ in such a way that the fractions Ni fi ≡ Nj

(3.88)

tend to constants, (3.75) goes into the multinomial distribution m(r1 · · · rk | f 1 · · · f k ) =

r! f r1 · · · f krk , r1 ! · · · rk ! 1

(3.89)

where r ≡ ri . And, as in (3.87), we can define a generating function of (k − 1) variables, from which we can prove that (3.89) is correctly normalized and derive many other useful results. Exercise 3.2. Suppose an urn contains N = Ni balls, N1 of color 1, N2 of color 2, . . . , Nk of color k. We draw m balls without replacement; what is the probability that we have at least one of each color? Supposing k = 5, all Ni = 10, how many do we need to draw in order to have at least a 90% probability for getting a full set?

Exercise 3.3. Suppose that in the previous exercise k is initially unknown, but we know that the urn contains exactly 50 balls. Drawing out 20 of them, we find three different colors; now what do we know about k? We know from deductive reasoning (i.e. with certainty) that 3 ≤ k ≤ 33; but can you set narrower limits k1 ≤ k ≤ k2 within which it is highly likely to be? Hint: This question goes beyond the sampling theory of this chapter because, like most real scientific problems, the answer depends to some degree on our common sense judgments; nevertheless, our rules of probability theory are quite capable of dealing with it, and persons with reasonable common sense cannot differ appreciably in their conclusions.

72

Part 1 Principles and elementary applications

Exercise 3.4. The M urns are now numbered 1 to M, and M balls, also numbered 1 to M, are thrown into them, one in each urn. If the numbers of a ball and its urn are the same, we have a match. Show that the probability for at least one match is h=

M (−1)k+1 /k!

(3.90)

k=1

As M → ∞, this converges to 1 − 1/e = 0.632. The result is surprising to many, because, however large M is, there remains an appreciable probability for no match at all.

Exercise 3.5. N balls are tossed into M urns; there are evidently M N ways this can be done. If the robot considers them all equally likely, what is the probability that each urn receives at least one ball?

3.8 Sampling with replacement Up to now, we have considered only the case where we sample without replacement; and that is evidently appropriate for many real situations. For example, in a quality control application, what we have called simply ‘drawing a ball’ might consist of taking a manufactured item, such as an electric light bulb, from a carton of similar light bulbs and testing it to destruction. In a chemistry experiment, it might consist of weighing out a sample of an unknown protein, then dissolving it in hot sulfuric acid to measure its nitrogen content. In either case, there can be no thought of ‘drawing that same ball’ again. But suppose now that, being less destructive, we sample balls from the urn and, after recording the ‘color’ (i.e. the relevant property) of each, we replace it in the urn before drawing the next ball. This case, of sampling with replacement, is enormously more complicated conceptually, but, with some assumptions usually made, ends up being simpler mathematically than sampling without replacement. Let us go back to the probability for drawing two red balls in succession. Denoting by B the same background information as before, except for the added stipulation that the balls are to be replaced, we still have an equation like (3.9): P(R1 R2 |B ) = P(R1 |B )P(R2 |R1 B )

(3.91)

and the first factor is still, evidently, (M/N ); but what is the second one? Answering this would be, in general, a very difficult problem, requiring much additional analysis if the background information B includes some simple but highly relevant common sense information that we all have. What happens to that red ball that we put back in the urn? If we merely dropped it into the urn, and immediately drew another ball, then it was

3 Elementary sampling theory

73

left lying on the top of the other balls (or in the top layer of balls), and so it is more likely to be drawn again than any other specified ball whose location in the urn is unknown. But this upsets the whole basis of our calculation, because the probability for drawing any particular (ith) ball is no longer given by the Bernoulli urn rule which led to (3.11).

3.8.1 Digression: a sermon on reality vs. models The difficulty we face here is that many things which were irrelevant from symmetry, as long as the robot’s state of knowledge was invariant under any permutation of the balls, suddenly become relevant, and, by one of our desiderata of rationality, the robot must take into account all the relevant information it has. But the probability for drawing any particular ball now depends on such details as the exact size and shape of the urn, the size of the balls, the exact way in which the first one was tossed back in, the elastic properties of balls and urn, the coefficients of friction between balls and between ball and urn, the exact way you reach in to draw the second ball, etc. In a symmetric situation, all of these details are irrelevant. Even if all these relevant data were at hand, we do not think that a team of the world’s best scientists and mathematicians, backed up by all the world’s computing facilities, would be able to solve the problem; or would even know how to get started on it. Still, it would not be quite right to say that the problem is unsolvable in principle; only so complicated that it is not worth anybody’s time to think about it. So what do we do? In probability theory there is a very clever trick for handling a problem that becomes too difficult. We just solve it anyway by: (1) making it still harder; (2) redefining what we mean by ‘solving’ it, so that it becomes something we can do; (3) inventing a dignified and technical-sounding word to describe this procedure, which has the psychological effect of concealing the real nature of what we have done, and making it appear respectable.

In the case of sampling with replacement, we apply this strategy as follows. (1) Suppose that, after tossing the ball in, we shake up the urn. However complicated the problem was initially, it now becomes many orders of magnitude more complicated, because the solution now depends on every detail of the precise way we shake it, in addition to all the factors mentioned above. (2) We now assert that the shaking has somehow made all these details irrelevant, so that the problem reverts back to the simple one where the Bernoulli urn rule applies. (3) We invent the dignified-sounding word randomization to describe what we have done. This term is, evidently, a euphemism, whose real meaning is: deliberately throwing away relevant information when it becomes too complicated for us to handle.

We have described this procedure in laconic terms, because an antidote is needed for the impression created by some writers on probability theory, who attach a kind of mystical significance to it. For some, declaring a problem to be ‘randomized’ is an incantation with

74

Part 1 Principles and elementary applications

the same purpose and effect as those uttered by an exorcist to drive out evil spirits; i.e. it cleanses their subsequent calculations and renders them immune to criticism. We agnostics often envy the True Believer, who thus acquires so easily that sense of security which is forever denied to us. However, in defense of this procedure, we have to admit that it often leads to a useful approximation to the correct solution; i.e. the complicated details, while undeniably relevant in principle, might nevertheless have little numerical effect on the answers to certain particularly simple questions, such as the probability for drawing r red balls in n trials when n is sufficiently small. But from the standpoint of principle, an element of vagueness necessarily enters at this point; for, while we may feel intuitively that this leads to a good approximation, we have no proof of this, much less a reliable estimate of the accuracy of the approximation, which presumably improves with more shaking. The vagueness is evident particularly in the fact that different people have widely divergent views about how much shaking is required to justify step (2). Witness the minor furor surrounding a US Government-sponsored and nationally televized game of chance some years ago, when someone objected that the procedure for drawing numbers from a fish bowl to determine the order of call-up of young men for Military Service was ‘unfair’ because the bowl hadn’t been shaken enough to make the drawing ‘truly random’, whatever that means. Yet if anyone had asked the objector: ‘To whom is it unfair?’ he could not have given any answer except, ‘To those whose numbers are on top; I don’t know who they are.’ But after any amount of further shaking, this will still be true! So what does the shaking accomplish? Shaking does not make the result ‘random’, because that term is basically meaningless as an attribute of the real world; it has no clear definition applicable in the real world. The belief that ‘randomness’ is some kind of real property existing in Nature is a form of the mind projection fallacy which says, in effect, ‘I don’t know the detailed causes – therefore – Nature does not know them.’ What shaking accomplishes is very different. It does not affect Nature’s workings in any way; it only ensures that no human is able to exert any wilful influence on the result. Therefore, nobody can be charged with ‘fixing’ the outcome. At this point, you may accuse us of nitpicking, because you know that after all this sermonizing, we are just going to go ahead and use the randomized solution like everybody else does. Note, however, that our objection is not to the procedure itself, provided that we acknowledge honestly what we are doing; i.e. instead of solving the real problem, we are making a practical compromise and being, of necessity, content with an approximate solution. That is something we have to do in all areas of applied mathematics, and there is no reason to expect probability theory to be any different. Our objection is to the belief that by randomization we somehow make our subsequent equations exact; so exact that we can then subject our solution to all kinds of extreme conditions and believe the results, when applied to the real world. The most serious and most common error resulting from this belief is in the derivation of limit theorems (i.e. when sampling with replacement, nothing prevents us from passing to the limit n → ∞ and obtaining the usual ‘laws of large numbers’). If we do not recognize the approximate

3 Elementary sampling theory

75

nature of our starting equations, we delude ourselves into believing that we have proved things (such as the identity of probability and limiting frequency) that are just not true in real repetitive experiments. The danger here is particularly great because mathematicians generally regard these limit theorems as the most important and sophisticated fruits of probability theory, and have a tendency to use language which implies that they are proving properties of the real world. Our point is that these theorems are valid properties of the abstract mathematical model that was defined and analyzed. The issue is: to what extent does that model resemble the real world? It is probably safe to say that no limit theorem is directly applicable in the real world, simply because no mathematical model captures every circumstance that is relevant in the real world. Anyone who believes that he is proving things about the real world, is a victim of the mind projection fallacy. Let us return to the equations. What answer can we now give to the question posed after Eq. (3.91)? The probability P(R2 |R1 B ) of drawing a red ball on the second draw clearly depends not only on N and M, but also on the fact that a red one has already been drawn and replaced. But this latter dependence is so complicated that we can’t, in real life, take it into account; so we shake the urn to ‘randomize’ the problem, and then declare R1 to be irrelevant: P(R2 |R1 B ) = P(R2 |B ) = M/N . After drawing and replacing the second ball, we again shake the urn, declare it ‘randomized,’ and set P(R3 |R2 R1 B ) = P(R3 |B ) = M/N , etc. In this approximation, the probability for drawing a red ball at any trial is M/N . This is not just a repetition of what we learned in (3.37); what is new here is that the result now holds whatever information the robot may have about what happened in the other trials. This leads us to write the probability for drawing exactly r red balls in n trials, regardless of order, as

r N − M n−r n M , (3.92) N N r which is just the binomial distribution (3.86). Randomized sampling with replacement from an urn with finite N has approximately the same effect as passage to the limit N → ∞ without replacement. Evidently, for small n, this approximation will be quite good; but for large n these small errors can accumulate (depending on exactly how we shake the urn, etc.) to the point where (3.92) is misleading. Let us demonstrate this by a simple, but realistic, extension of the problem.

3.9 Correction for correlations Suppose that, from an intricate logical analysis, drawing and replacing a red ball increases the probability for a red one at the next draw by some small amount > 0, while drawing and replacing a white one decreases the probability for a red one at the next draw by a (possibly equal) small quantity δ > 0; and that the influence of earlier draws than the last

76

Part 1 Principles and elementary applications

one is negligible compared with or δ. You may call this effect a small ‘propensity’ if you like; at least it expresses a physical causation that operates only forward in time. Then, letting C stand for all the above background information, including the statements just made about correlations and the information that we draw n balls, we have P(Rk |Rk−1 C) = p + , P(Wk |Rk−1 C) = 1 − p − ,

P(Rk |Wk−1 C) = p − δ, P(Wk |Wk−1 C) = 1 − p + δ,

(3.93)

where p ≡ M/N . From this, the probability for drawing r red and (n − r ) white balls in any specified order is easily seen to be

p( p + )c ( p − δ)c (1 − p + δ)w (1 − p − )w

(3.94)

if the first draw is red; whereas, if the first is white, the first factor in (3.94) should be (1 − p). Here, c is the number of red draws preceded by red ones, c the number of red preceded by white, w the number of white draws preceded by white, and w the number of white preceded by red. Evidently, r −1 n −r , w + w = , (3.95) c + c = r n −r −1 the upper and lower cases holding when the first draw is red or white, respectively. When r and (n − r ) are small, the presence of and δ in (3.94) makes little difference, and the equation reduces for all practical purposes to pr (1 − p)n−r ,

(3.96)

as in the binomial distribution (3.92). But, as these numbers increase, we can use relations of the form

c c exp , (3.97) 1+ p p and (3.94) goes into

pr (1 − p)n−r exp

c − δc δw − w + . p 1− p

(3.98)

The probability for drawing r red and (n − r ) white balls now depends on the order in which red and white appear, and, for a given , when the numbers c, c , w, w become sufficiently large, the probability can become arbitrarily large (or small) compared with (3.92). We see this effect most clearly if we suppose that N = 2M, p = 1/2, in which case we will surely have = δ. The exponential factor in (3.98) then reduces to (3.99) exp 2[(c − c ) + (w − w )] . This shows that (i) as the number n of draws tends to infinity, the probability for results containing ‘long runs’ (i.e. long strings of red (or white) balls in succession), becomes arbitrarily large compared with the value given by the ‘randomized’ approximation; (ii) this

3 Elementary sampling theory

77

effect becomes appreciable when the numbers (c), etc., become of order unity. Thus, if = 10−2 , the randomized approximation can be trusted reasonably well as long as n < 100; beyond that, we might delude ourselves by using it. Indeed, it is notorious that in real repetitive experiments where conditions appear to be the same at each trial, such runs – although extremely improbable on the randomized approximation – are nevertheless observed to happen. Now let us note how the correlations expressed by (3.93) affect some of our previous calculations. The probabilities for the first draw are of course the same as (3.8); we now use the notation M N−M , q = 1 − p = P(W1 |C) = . (3.100) p = P(R1 |C) = N N But for the second trial we have instead of (3.35) P(R2 |C) = P(R2 R1 |C) + P(R2 W1 |C) = P(R2 |R1 C) P(R1 |C) + P(R2 |W1 C) P(W1 |C) = ( p + ) p + ( p − δ)q = p + ( p − qδ),

(3.101)

and continuing for the third trial P(R3 |C) = P(R3 |R2 C)P(R2 |C) + P(R3 |W2 C)P(W2 |C) = ( p + )( p + p − qδ) + ( p − δ)(q − p + qδ) = p + (1 + + δ)( p − qδ).

(3.102)

We see that P(Rk |C) is no longer independent of k; the correlated probability distribution is no longer exchangeable. But does P(Rk |C) approach some limit as k → ∞? It would be almost impossible to guess the general P(Rk |C) by induction, following the method in (3.101) and (3.102) a few steps further. For this calculation we need a more powerful method. If we write the probabilities for the kth trial as a vector,

P(Rk |C) , (3.103) Vk ≡ P(Wk |C) then (3.93) can be expressed in matrix form: Vk = M Vk−1 , with

M=

[ p + ]

[ p − δ]

[q − ]

[q + δ]

(3.104) .

(3.105)

This defines a Markov chain of probabilities, and M is called the transition matrix. Now the slow induction of (3.101) and (3.102) proceeds instantly to any distance we please: Vk = M k−1 V1 .

(3.106)

78

Part 1 Principles and elementary applications

So, to have the general solution, we need only to find the eigenvectors and eigenvalues of M. The characteristic polynomial is C(λ) ≡ det(Mi j − λδi j ) = λ2 − λ(1 + + δ) + ( + δ)

(3.107)

so the roots of C(λ) = 0 are the eigenvalues λ1 = 1 λ2 = + δ. Now, for any 2 × 2 matrix

M=

a c

(3.108)

b d

(3.109)

with an eigenvalue λ, the corresponding (non-normalized) right eigenvector is x = ( bλ − a ) ,

(3.110)

for which we have at once M x = λx. Therefore, our eigenvectors are

p−δ 1 , x2 = . x1 = q − −1

(3.111)

These are not orthogonal, since M is not a symmetric matrix. Nevertheless, if we use (3.111) to define the transformation matrix

[ p − δ] 1 S= , (3.112) [q − ] −1 we find its inverse to be S −1 =

1 1−−δ

1 [q − ]

1 −[ p − δ]

,

(3.113)

and we can verify by direct matrix multiplication that

λ1 0 , S −1 M S = = 0 λ2

(3.114)

where is the diagonalized matrix. Then we have for any r , positive, negative, or even complex: M r = S r S −1 or 1 M = 1−−δ r

p − δ + [ + δ]r [q − ]

[ p − δ][1 − ( + δ)r ]

[q − ][1 − ( + δ)r ]

q − + [ + δ]r [ p − δ]

and since V1 =

p q

(3.115) ,

(3.116)

(3.117)

3 Elementary sampling theory

79

the general solution (3.106) sought is P(Rk |C) =

( p − δ) − ( + δ)k−1 ( p − qδ) . 1−−δ

(3.118)

We can check that this agrees with (3.100), (3.101) and (3.102). From examining (3.118) it is clear why it would have been almost impossible to guess the general formula by induction. When = δ = 0, this reduces to P(Rk |C) = p, supplying the proof promised after Eq. (3.37). Although we started this discussion by supposing that and δ were small and positive, we have not actually used that assumption, and so, whatever their values, the solution (3.118) is exact for the abstract model that we have defined. This enables us to include two interesting extreme cases. If not small, and δ must be at least bounded, because all quantities in (3.93) must be probabilities (i.e. in [0, 1]). This requires that − p ≤ ≤ q,

−q ≤ δ ≤ p,

(3.119)

or −1 ≤ + δ ≤ 1.

(3.120)

But from (3.119), + δ = 1 if and only if = q, δ = p, in which case the transition matrix reduces to the unit matrix

1 0 M= (3.121) 0 1 and there are no ‘transitions’. This is a degenerate case in which the positive correlations are so strong that whatever color happens to be drawn on the first trial is certain to be drawn also on all succeeding ones: P(Rk |C) = p,

all k.

Likewise, if + δ = −1, then the transition matrix must be

0 1 M= 1 0

(3.122)

(3.123)

and we have nothing but transitions; i.e. the negative correlations are so strong that the colors are certain to alternate after the first draw: p, k odd . (3.124) P(Rk |C) = q, k even This case is unrealistic because intuition tells us rather strongly that and δ should be positive quantities; surely, whatever the logical analysis used to assign the numerical value of , leaving a red ball in the top layer must increase, not decrease, the probability of red on the next draw. But if and δ must not be negative, then the lower bound in (3.120) is really zero, which is achieved only when = δ = 0. Then M in (3.105) becomes singular, and we revert to the binomial distribution case already discussed.

80

Part 1 Principles and elementary applications

In the intermediate and realistic cases where 0 < | + δ| < 1, the last term of (3.118) attenuates exponentially with k, and in the limit P(Rk |C) →

p−δ . 1−−δ

(3.125)

But although these single-trial probabilities settle down to steady values as in an exchangeable distribution, the underlying correlations are still at work and the limiting distribution is not exchangeable. To see this, let us consider the conditional probabilities P(Rk |R j C). These are found by noting that the Markov chain relation (3.104) holds whatever the vector Vk−1 ; i.e. whether or not it is the vector generated from V1 as in (3.106). Therefore, if we are given that red occurred on the jth trial, then

1 , (3.126) Vj = 0 and we have from (3.104) Vk = M k− j V j ,

j ≤ k,

(3.127)

from which, using (3.115), P(Rk |R j C) =

( p − δ) + ( + δ)k− j (q − ) , 1−−δ

j < k,

(3.128)

which approaches the same limit (3.125). The forward inferences are about what we might expect; the steady value (3.125) plus a term that decays exponentially with distance. But the backward inferences are different; note that the general product rule holds, as always: P(Rk R j |C) = P(Rk |R j C) P(R j |C) = P(R j |Rk C) P(Rk |C).

(3.129)

Therefore, since we have seen that P(Rk |C) = P(R j |C), it follows that P(R j |Rk C) = P(Rk |R j C).

(3.130)

The backward inference is still possible, but it is no longer the same formula as the forward inference as it would be in an exchangeable sequence. As we shall see later, this example is the simplest possible ‘baby’ version of a very common and important physical problem: an irreversible process in the ‘Markovian approximation’. Another common technical language would call it an autoregressive model of first order. It can be generalized greatly to the case of matrices of arbitrary dimension and many-step or continuous, rather than single-step, memory influences. But for reasons noted earlier (confusion of inference and causality in the literature of statistical mechanics), the backward inference part of the solution is almost always missed. Some try to do backward inference by extrapolating the forward solution backward in time, with quite bizarre and unphysical results. Therefore the reader is, in effect, conducting new research in doing the following exercise.

3 Elementary sampling theory

81

Exercise 3.6. Find the explicit formula P(R j |Rk C) for the backward inference corresponding to the result (3.128) by using (3.118) and (3.129). (a) Explain the reason for the difference between forward and backward inferences in simple intuitive terms. (b) In what way does the backward inference differ from the forward inference extrapolated backward? Which is more reasonable intuitively? (c) Do backward inferences also decay to steady values? If so, is a property somewhat like exchangeability restored for events sufficiently separated? For example, if we consider only every tenth draw or every hundredth draw, do we approach an exchangeable distribution on this subset?

3.10 Simplification The above formulas (3.100)–(3.130) hold for any , δ satisfying the inequalities (3.119). But, on surveying them, we note that a remarkable simplification occurs if they satisfy p = qδ.

(3.131)

For then we have p−δ = p, 1−−δ

q − = q, 1−−δ

+δ =

, q

(3.132)

and our main results (3.118) and (3.128) collapse to P(Rk |C) = p, P(Rk |R j C) = P(R j |Rk C) = p + q

all k, |k− j| , q

(3.133)

all k, j.

(3.134)

The distribution is still not exchangeable, since the conditional probabilities (3.134) still depend on the separation |k − j| of the trials; but the symmetry of forward and backward inferences is restored, even though the causal influences , δ operate only forward. Indeed, we see from our derivation of (3.40) that this forward–backward symmetry is a necessary consequence of (3.133), whether or not the distribution is exchangeable. What is the meaning of this magic condition (3.131)? It does not make the matrix M assume any particularly simple form, and it does not turn off the effect of the correlations. What it does is to make the solution (3.133) invariant; that is, the initial vector (3.117) is then equal but for normalization to the eigenvector x1 in (3.111), so the initial vector remains unchanged by the matrix (3.105). In general, of course, there is no reason why this simplifying condition should hold. Yet in the case of our urn, we can see a kind of rationale for it. Suppose that when the urn has initially N balls, they are in L layers. Then, after withdrawing one ball, there are about n = (N − 1)/L of them in the top layer, of which we expect about np to be red, nq = n(1 − p) white. Now we toss the drawn ball back in. If it was red, the probability of

82

Part 1 Principles and elementary applications

getting red at the next draw if we do not shake the urn is about 1 1− p np + 1 = p+ +O 2 , n+1 n n and if it is white the probability for getting white at the next draw is about 1 p n(1 − p) + 1 =1− p+ +O 2 . n+1 n n

(3.135)

(3.136)

Comparing with (3.93) we see that we could estimate and δ by q/n ,

δ p/n

(3.137)

whereupon our magic condition (3.131) is satisfied. Of course, the argument just given is too crude to be called a derivation, but at least it indicates that there is nothing inherently unreasonable about (3.131). We leave it for the reader to speculate about what significance and use this curious fact might have, and whether it generalizes beyond the Markovian approximation. We have now had a first glimpse of some of the principles and pitfalls of standard sampling theory. All the results we have found will generalize greatly, and will be useful parts of our ‘toolbox’ for the applications to follow.

3.11 Comments In most real physical experiments we are not, literally, drawing from any ‘urn’. Nevertheless, the idea has turned out to be a useful conceptual device, and in the 250 years since Bernoulli’s Ars Conjectandi it has appeared to scientists that many physical measurements are very much like ‘drawing from Nature’s urn’. But to some the word ‘urn’ has gruesome connotations, and in much of the literature one finds such expressions as ‘drawing from a population’. In a few cases, such as recording counts from a radioactive source, survey sampling, and industrial quality control testing, one is quite literally drawing from a real, finite population, and the urn analogy is particularly apt. Then the probability distributions just found, and their limiting forms and generalizations noted in Chapter 7, will be appropriate and useful. In some cases, such as agricultural experiments or testing the effectiveness of a new medical procedure, our credulity can be strained to the point where we see a vague resemblance to the urn problem. In other cases, such as flipping a coin, making repeated measurements of the temperature and wind velocity, the position of a planet, the weight of a baby, or the price of a commodity, the urn analogy seems so farfetched as to be dangerously misleading. Yet in much of the literature one still uses urn distributions to represent the data probabilities, and tries to justify that choice by visualizing the experiment as drawing from some ‘hypothetical infinite population’ which is entirely a figment of our imagination. Functionally, the main consequence of this is strict independence of successive draws, regardless of all other

3 Elementary sampling theory

83

circumstances. Obviously, this is not sound reasoning, and a price must be paid eventually in erroneous conclusions. This kind of conceptualizing often leads one to suppose that these distributions represent not just our prior state of knowledge about the data, but the actual long-run variability of the data in such experiments. Clearly, such a belief cannot be justified; anyone who claims to know in advance the long-run results in an experiment that has not been performed is drawing on a vivid imagination, not on any fund of actual knowledge of the phenomenon. Indeed, if that infinite population is only imagined, then it seems that we are free to imagine any population we please. From a mere act of the imagination we cannot learn anything about the real world. To suppose that the resulting probability assignments have any real physical meaning is just another form of the mind projection fallacy. In practice, this diverts our attention to irrelevancies and away from the things that really matter (such as information about the real world that is not expressible in terms of any sampling distribution, or does not fit into the urn picture, but which is nevertheless highly cogent for the inferences we want to make). Usually, the price paid for this folly is missed opportunities; had we recognized that information, more accurate and/or more reliable inferences could have been made. Urn-type conceptualizing is capable of dealing with only the most primitive kind of information, and really sophisticated applications require us to develop principles that go far beyond the idea of urns. But the situation is quite subtle, because, as we stressed before in connection with G¨odel’s theorem, an erroneous argument does not necessarily lead to a wrong conclusion. In fact, as we shall find in Chapter 9, highly sophisticated calculations sometimes lead us back to urn-type distributions, for purely mathematical reasons that have nothing to do conceptually with urns or populations. The hypergeometric and binomial distributions found in this chapter will continue to reappear, because they have a fundamental mathematical status quite independent of arguments that we used to find them here.2 On the other hand, we could imagine a different problem in which we would have full confidence in urn-type reasoning leading to the binomial distribution, although it probably never arises in the real world. If we had a large supply {U1 , U2 , . . . , Un } of urns known to have identical contents, and those contents are known with certainty in advance – and then we used a fresh new urn for each draw – then we would assign P(A) = M/N for every draw, strictly independently of what we know about any other draw. Such prior information would take precedence over any amount of data. If we did not know the contents (M, N ) of the urns – but we knew they all had identical contents – this strict independence would be lost, because then every draw from one urn would tell us something about the contents of the other urns, although it does not physically influence them. From this we see once again that logical dependence is in general very different from causal physical dependence. We belabor this point so much because it is not recognized at all in most expositions of probability theory, and this has led to errors, as is suggested 2

In a similar way, exponential functions appear in all parts of analysis because of their fundamental mathematical properties, although their conceptual basis varies widely.

84

Part 1 Principles and elementary applications

by Exercise 3.6. In Chapter 4 we shall see a more serious error of this kind (see the discussion following Eq. (4.29)). But even when one manages to avoid actual error, to restrict probability theory to problems of physical causation is to lose its most important applications. The extent of this restriction – and the magnitude of the missed opportunity – does not seem to be realized by those who are victims of this fallacy. Indeed, most of the problems we have solved in this chapter are not considered to be within the scope of probability theory, and do not appear at all in those expositions which regard probability as a physical phenomenon. Such a view restricts one to a small subclass of the problems which can be dealt with usefully by probability theory as logic. For example, in the ‘physical probability’ theory it is not even considered legitimate to speak of the probability for an outcome at a specified trial; yet that is exactly the kind of thing about which it is necessary to reason in conducting scientific inference. The calculations of this chapter have illustrated this many times. In summary: in each of the applications to follow, one must consider whether the experiment is really ‘like’ drawing from an urn; if it is not, then we must go back to first principles and apply the basic product and sum rules in the new context. This may or may not yield the urn distributions. 3.11.1 A look ahead The probability distributions found in this chapter are called sampling distributions, or direct probabilities, which indicate that they are of the following form: Given some hypothesis H about the phenomenon being observed (in the case just studied, the contents (M, N ) of the urn), what is the probability that we shall obtain some specified data D (in this case, some sequence of red and white balls)? Historically, the term ‘direct probability’ has long had the additional connotation of reasoning from a supposed physical cause to an observable effect. But we have seen that not all sampling distributions can be so interpreted. In the present work we shall not use this term, but use ‘sampling distribution’ in the general sense of reasoning from some specified hypothesis to potentially observable data, whether the link between hypothesis and data is logical or causal. Sampling distributions make predictions, such as the hypergeometric distribution (3.22), about potential observations (for example, the possible values and relative probabilities of different values of r ). If the correct hypothesis is indeed known, then we expect the predictions to agree closely with the observations. If our hypothesis is not correct, they may be very different; then the nature of the discrepancy gives us a clue toward finding a better hypothesis. This is, very broadly stated, the basis for scientific inference. Just how wide the disagreement between prediction and observation must be in order to justify our rejecting the present hypothesis and seeking a new one, is the subject of significance tests. It was the need for such tests in astronomy that led Laplace and Gauss to study probability theory in the 18th and 19th centuries. Although sampling theory plays a dominant role in conventional pedagogy, in the real world such problems are an almost negligible minority. In virtually all real problems of

3 Elementary sampling theory

85

scientific inference we are in just the opposite situation; the data D are known but the correct hypothesis H is not. Then the problem facing the scientist is of the inverse type: Given the data D, what is the probability that some specified hypothesis H is true? Exercise 3.3 above was a simple introduction to this kind of problem. Indeed, the scientist’s motivation for collecting data is usually to enable him to learn something about the phenomenon in this way. Therefore, in the present work our attention will be directed almost exclusively to the methods for solving the inverse problem. This does not mean that we do not calculate sampling distributions; we need to do this constantly and it may be a major part of our computational job. But it does mean that for us the finding of a sampling distribution is almost never an end in itself. Although the basic rules of probability theory solve such inverse problems just as readily as sampling problems, they have appeared quite different conceptually to many writers. A new feature seems present, because it is obvious that the question: ‘What do you know about the hypothesis H after seeing the data D?’ cannot have any defensible answer unless we take into account: ‘What did you know about H before seeing D?’ But this matter of previous knowledge did not figure in any of our sampling theory calculations. When we asked: ‘What do you know about the data given the contents (M, N ) of the urn?’ we did not seem to consider: ‘What did you know about the data before you knew (M, N )?’ This apparent dissymmetry, it will turn out, is more apparent than real; it arises mostly from some habits of notation that we have slipped into, which obscure the basic unity of all inference. But we shall need to understand this very well before we can use probability theory effectively for hypothesis tests and their special cases, significance tests. In the next chapter we turn to this problem.

4 Elementary hypothesis testing

I conceive the mind as a moving thing, and arguments as the motive forces driving it in one direction or the other. John Craig (1699) John Craig was a Scottish mathematician, and one of the first scholars to recognize the merit in Isaac Newton’s new invention of ‘the calculus’. The above sentence, written some 300 years ago in one of the early attempts to create a mathematical model of reasoning, requires changing by only one word in order to describe our present attitude. We would like to think that our minds are swayed not by arguments, but by evidence. And if fallible humans do not always achieve this objectivity, our desiderata were chosen with the aim of achieving it in our robot. Therefore to see how our robot’s mind is ‘driven in one direction or the other’ by new evidence, we examine some applications that, although simple mathematically, have proved to have practical importance in several different fields. As is clear from the basic desiderata listed in Chapter 1, the fundamental principle underlying all probabilistic inference is: To form a judgment about the likely truth or falsity of any proposition A, the correct procedure is to calculate the probability that A is true: P(A|E 1 E 2 · · ·)

(4.1)

conditional on all the evidence at hand. In a sampling context (i.e. when A stands for some data set), this principle has seemed obvious to everybody from the start. We used it implicitly throughout Chapter 3 without feeling any need to state it explicitly. But when we turn to a more general context, the principle needs to be stressed because it has not been obvious to all workers (as we shall see repeatedly in later chapters). The essence of ‘honesty’ or ‘objectivity’ demands that we take into account all the evidence we have, not just some arbitrarily chosen subset of it. Any such choice would amount either to ignoring evidence that we have, or presuming evidence that we do not have. This leads us to recognize at the outset that some information is always available to the robot.

86

4 Elementary hypothesis testing

87

4.1 Prior probabilities Generally, when we give the robot its current problem, we will give it also some new information or ‘data’ D pertaining to the specific matter at hand. But almost always the robot will have other information which we denote, for the time being, by X . This includes, at the very least, all its past experience, from the time it left the factory to the time it received its current problem. That is always part of the information available, and our desiderata do not allow the robot to ignore it. If we humans threw away what we knew yesterday in reasoning about our problems today, we would be below the level of wild animals; we could never know more than we can learn in one day, and education and civilization would be impossible. So to our robot there is no such thing as an ‘absolute’ probability; all probabilities are necessarily conditional on X at least. In solving a problem, its inferences should, according to the principle (4.1), take the form of calculating probabilities of the form P(A|D X ). Usually, part of X is irrelevant to the current problem, in which case its presence is unnecessary but harmless; if it is irrelevant, it will cancel out mathematically. Indeed, that is what we really mean by ‘irrelevant’. Any probability P(A|X ) that is conditional on X alone is called a prior probability. But we caution that the term ‘prior’ is another of those terms from the distant past that can be inappropriate and misleading today. In the first place, it does not necessarily mean ‘earlier in time’. Indeed, the very concept of time is not in our general theory (although we may of course introduce it in a particular problem). The distinction is a purely logical one; any additional information beyond the immediate data D of the current problem is by definition ‘prior information’. For example, it has happened more than once that a scientist has gathered a mass of data, but before getting around to the data analysis he receives some surprising new information that completely changes his ideas of how the data should be analyzed. That surprising new information is, logically, ‘prior information’ because it is not part of the data. Indeed, the separation of the totality of the evidence into two components called ‘data’ and ‘prior information’ is an arbitrary choice made by us, only for our convenience in organizing a chain of inferences. Although all such organizations must lead to the same final results if they succeed at all, some may lead to much easier calculations than others. Therefore, we do need to consider the order in which different pieces of information shall be taken into account in our calculations. Because of some strange things that have been thought about prior probabilities in the past, we point out also that it would be a big mistake to think of X as standing for some hidden major premise, or some universally valid proposition about Nature. Old misconceptions about the origin, nature, and proper functional use of prior probabilities are still common among those who continue to use the archaic term ‘a-priori probabilities’. The term ‘a-priori’ was introduced by Immanuel Kant to denote a proposition whose truth can be known independently of experience; which is most emphatically what we do not mean here. X denotes simply whatever additional information the robot has beyond what we have

88

Part 1 Principles and elementary applications

chosen to call ‘the data’. Those who are actively familiar with the use of prior probabilities in current real problems usually abbreviate further, and instead of saying ‘the prior probability’ or ‘the prior probability distribution’, they say simply, ‘the prior’. There is no single universal rule for assigning priors – the conversion of verbal prior information into numerical prior probabilities is an open-ended problem of logical analysis, to which we shall return many times. At present, four fairly general principles are known – group invariance, maximum entropy, marginalization, and coding theory – which have led to successful solutions of many different kinds of problems. Undoubtedly, more principles are waiting to be discovered, which will open up new areas of application. In conventional sampling theory, the only scenario considered is essentially that of ‘drawing from an urn’, and the only probabilities that arise are those that presuppose the contents of the ‘urn’ or the ‘population’ already known, and seek to predict what ‘data’ we are likely to get as a result. Problems of this type can become arbitrarily complicated in the details, and there is a highly developed mathematical literature dealing with them. For example, the massive two-volume work of Feller (1950, 1966) and the weighty compendium of Kendall and Stuart (1977) are restricted entirely to the calculation of sampling distributions. These works contain hundreds of nontrivial solutions that are useful in all parts of probability theory, and every worker in the field should be familiar with what is available in them. However, as noted in the preceding chapter, almost all real problems of scientific inference involve us in the opposite situation; we already know the data D, and want probability theory to help us decide on the likely contents of the ‘urn’. Stated more generally, we want probability theory to indicate which of a given set of hypotheses {H1 , H2 , . . .} is most likely to be true in the light of the data and any other evidence at hand. For example, the hypotheses may be various suppositions about the physical mechanism that is generating the data. But fundamentally, as in Chapter 3, physical causation is not an essential ingredient of the problem; what is essential is only that there be some kind of logical connection between the hypotheses and the data. To solve this problem does not require any new principles beyond the product rule (3.1) that we used to find conditional sampling distributions; we need only to make a different choice of the propositions. Let us now use the notation X = prior information, H = some hypothesis to be tested, D = the data, and write the product rule in the form P(D H |X ) = P(D|H X )P(H |X ) = P(H |D X )P(D|X ).

(4.2)

We recognize P(D|H X ) as the sampling distribution which we studied in Chapter 3, but now written in a more flexible notation. In Chapter 3 we did not need to take any particular note of the prior information X , because all probabilities were conditional on H , and so we could suppose implicitly that the general verbal prior information defining the problem was included in H . This is the habit of notation that we have slipped into, which has obscured

4 Elementary hypothesis testing

89

the unified nature of all inference. Throughout all of sampling theory one can get away with this, and as a result the very term ‘prior information’ is absent from the literature of sampling theory. Now, however, we are advancing to probabilities that are not conditional on H , but are still conditional on X , so we need separate notations for them. We see from (4.2) that to judge the likely truth of H in the light of the data, we need not only the sampling probability P(D|H X ) but also the prior probabilities for D and H : P(H |D X ) = P(H |X )

P(D|H X ) . P(D|X )

(4.3)

Although the derivation (4.2)–(4.3) is only the same mathematical result as (3.50)–(3.51), it has appeared to many workers to have a different logical status. From the start it has seemed clear how one determines numerical values of sampling probabilities, but not what determines the prior probabilities. In the present work we shall see that this was only an artifact of an unsymmetrical way of formulating problems, which left them ill-posed. One could see clearly how to assign sampling probabilities because the hypothesis H was stated very specifically; had the prior information X been specified equally well, it would have been equally clear how to assign prior probabilities. When we look at these problems on a sufficiently fundamental level and realize how careful one must be to specify the prior information before we have a well-posed problem, it becomes evident that there is in fact no logical difference between (3.51) and (4.3); exactly the same principles are needed to assign either sampling probabilities or prior probabilities, and one man’s sampling probability is another man’s prior probability. The left-hand side of (4.3), P(H |D X ), is generally called a ‘posterior probability’, with the same caveat that this means only ‘logically later in the particular chain of inference being made’, and not necessarily ‘later in time’. And again the distinction is conventional, not fundamental; one man’s prior probability is another man’s posterior probability. There is really only one kind of probability; our different names for them refer only to a particular way of organizing a calculation. The last factor in (4.3) also needs a name, and it is called the likelihood L(H ). To explain current usage, we may consider a fixed hypothesis and its implications for different data sets; as we have noted before, the term P(D|H X ), in its dependence on D for fixed H , is called the ‘sampling distribution’. But we may consider a fixed data set in the light of various different hypotheses {H, H , . . .}; in its dependence on H for fixed D, P(D|H X ) is called the ‘likelihood’. A likelihood L(H ) is not itself a probability for H ; it is a dimensionless numerical function which, when multiplied by a prior probability and a normalization factor, may become a probability. Because of this, constant factors are irrelevant, and may be struck out. Thus, the quantity L(Hi ) = y(D) P(D|Hi X ) is equally deserving to be called the likelihood, where y is any positive number which may depend on D but is independent of the hypotheses {Hi }. Equation (4.3) is then the fundamental principle underlying a wide class of scientific inferences in which we try to draw conclusions from data. Whether we are trying to learn

90

Part 1 Principles and elementary applications

the character of a chemical bond from nuclear magnetic resonance data, the effectiveness of a medicine from clinical data, the structure of the earth’s interior from seismic data, the elasticity of a demand from economic data, or the structure of a distant galaxy from telescopic data, (4.3) indicates what probabilities we need to find in order to see what conclusions are justified by the totality of our evidence. If P(H |D X ) is very close to one (zero), then we may conclude that H is very likely to be true (false) and act accordingly. But if P(H |D X ) is not far from 1/2, then the robot is warning us that the available evidence is not sufficient to justify any very confident conclusion, and we need to obtain more and better evidence.

4.2 Testing binary hypotheses with binary data The simplest nontrivial problem of hypothesis testing is the one where we have only two hypotheses to test and only two possible data values. Surprisingly, this turns out to be a realistic and valuable model of many important inference and decision problems. Firstly, let us adapt (4.3) to this binary case. It gives us the probability that H is true, but we could have written it equally well for the probability that H is false: P(H |D X ) = P(H |X )

P(D|H X ) , P(D|X )

(4.4)

and if we take the ratio of the two equations, P(H |D X ) P(H |D X )

=

P(H |X ) P(D|H X ) P(H |X ) P(D|H X )

,

(4.5)

the term P(D|X ) will drop out. This may not look like any particular advantage, but the quantity that we have here, the ratio of the probability that H is true to the probability that it is false, has a technical name. We call it the ‘odds’ on the proposition H . So if we write the ‘odds on H , given D and X ’, as the symbol O(H |D X ) ≡

P(H |D X ) P(H |D X )

,

(4.6)

then we can combine (4.3) and (4.4) into the following form: O(H |D X ) = O(H |X )

P(D|H X ) P(D|H X )

.

(4.7)

The posterior odds on H is (are?) equal to the prior odds multiplied by a dimensionless factor, which is also called a likelihood ratio. The odds are (is?) a strict monotonic function of the probability, so we could equally well calculate this quantity.1 1

Our uncertain phrasing here indicates that ‘odds’ is a grammatically slippery word. We are inclined to agree with purists who say that it is, like ‘mathematics’ and ‘physics’, a singular noun in spite of appearances. Yet the urge to follow the vernacular and treat it as plural is sometimes irresistible, and so we shall be knowingly inconsistent and use it both ways, judging what seems euphonious in each case.

4 Elementary hypothesis testing

91

In many applications it is convenient to take the logarithm of the odds because of the fact that we can then add up terms. Now we could take logarithms to any base we please, and this cost the writer some trouble. Our analytical expressions always look neater in terms of natural (base e) logarithms. But back in the 1940s and 1950s when this theory was first developed, we used base 10 logarithms because they were easier to find numerically; the four-figure tables would fit on a single page. Finding a natural logarithm was a tedious process, requiring leafing through enormous old volumes of tables. Today, thanks to hand calculators, all such tables are obsolete and anyone can find a tendigit natural logarithm just as easily as a base 10 logarithm. Therefore, we started happily to rewrite this section in terms of the aesthetically prettier natural logarithms. But the result taught us that there is another, even stronger, reason for using base 10 logarithms. Our minds are thoroughly conditioned to the base 10 number system, and base 10 logarithms have an immediate, clear intuitive meaning to all of us. However, we just don’t know what to make of a conclusion that is stated in terms of natural logarithms, until it is translated back into base 10 terms. Therefore, we re-rewrote this discussion, reluctantly, back into the old, ugly base 10 convention. We define a new function, which we will call the evidence for H given D and X : e(H |D X ) ≡ 10 log10 O(H |D X ).

(4.8)

This is still a monotonic function of the probability. By using the base 10 and putting the factor 10 in front, we are now measuring evidence in decibels (hereafter abbreviated to db). The evidence for H , given D, is equal to the prior evidence plus the number of db provided by working out the log likelihood in the last term below: P(D|H X ) . (4.9) e(H |D X ) = e(H |X ) + 10 log10 P(D|H X ) Now suppose that this new information D actually consisted of several different propositions: D = D1 D2 D3 · · · .

(4.10)

Then we could expand the likelihood ratio by successive applications of the product rule: P(D1 |H X ) P(D2 |D1 H X ) + 10 log10 + ···. e(H |D X ) = e(H |X ) + 10 log10 P(D1 |H X ) P(D2 |D1 H X ) (4.11) But, in many cases, the probability for getting D2 is not influenced by knowledge of D1 : P(D2 |D1 H X ) = P(D2 |H X ).

(4.12)

One then says conventionally that D1 and D2 are independent. Of course, we should really say that the probabilities which the robot assigns to them are independent. It is a semantic confusion to attribute the property of ‘independence’ to propositions or events; for that implies, in common language, physical causal independence. We are concerned here with the very different quality of logical independence.

92

Part 1 Principles and elementary applications

To emphasize this, note that neither kind of independence implies the other. Two events may be in fact causally dependent (i.e. one influences the other); but for a scientist who has not yet discovered this, the probabilities representing his state of knowledge – which determine the only inferences he is able to make – might be independent. On the other hand, two events may be causally independent in the sense that neither exerts any causal influence on the other (for example, the apple crop and the peach crop); yet we perceive a logical connection between them, so that new information about one changes our state of knowledge about the other. Then for us their probabilities are not independent. Quite generally, as the robot’s state of knowledge represented by H and X changes, probabilities conditional on them may change from independent to dependent or vice versa; yet the real properties of the events remain the same. Then one who attributed the property of dependence or independence to the events would be, in effect, claiming for the robot the power of psychokinesis. We must be vigilant against this confusion between reality and a state of knowledge about reality, which we have called the ‘mind projection fallacy’. The point we are making is not just pedantic nitpicking; we shall see presently (Eq. (4.29)) that it has very real, substantive consequences. In Chapter 3 we have discussed some of the conditions under which these probabilities might be independent, in connection with sampling from a very large known population and sampling with replacement. In the closing Comments section, we noted that whether urn probabilities do or do not factor can depend on whether we do or do not know that the contents of several urns are the same. In our present problem, as in Chapter 3, to interpret causal independence as logical independence, or to interpret logical dependence as causal dependence, has led some to nonsensical conclusions in fields ranging from psychology to quantum theory. In case these several pieces of data are logically independent given (H X ) and also given (H X ), (4.11) becomes P(Di |H X ) , (4.13) log10 e(H |D X ) = e(H |X ) + 10 P(Di |H X ) i where the sum is over all the extra pieces of information that we obtain. To get some feeling for numerical values here, let us construct Table 4.1. We have three different scales on which we can measure degrees of plausibility: evidence, odds, or probability; they are all monotonic functions of each other. Zero db of evidence corresponds to odds of 1 or to a probability of 1/2. Now, every physicist or electrical engineer knows that 3 db means a factor of 2 (nearly) and 10 db is a factor of 10 (exactly); and so if we go in steps of 3 db, or 10, we can construct this table very easily. It is obvious from Table 4.1 why it is very cogent to give evidence in decibels. When probabilities approach one or zero, our intuition doesn’t work very well. Does the difference between the probability of 0.999 and 0.9999 mean a great deal to you? It certainly doesn’t to the writer. But after living with this for only a short while, the difference between evidence of plus 30 db and plus 40 db does have a clear meaning to us. It is now in a scale which our minds comprehend naturally. This is just another example of the Weber–Fechner law; intuitive human sensations tend to be logarithmic functions of the stimulus.

4 Elementary hypothesis testing

93

Table 4.1. Evidence, odds, and probability. e

O

p

0 3 6 10 20 30 40

1:1 2:1 4:1 10:1 100:1 1000:1 104 :1

1/2 2/3 4/5 10/11 100/101 0.999 0.9999

−e

1/O

1− p

Even the factor of 10 in (4.8) is appropriate. In the original acoustical applications, it was introduced so that a 1 db change in sound intensity would be, psychologically, about the smallest change perceptible to our ears. With a little familiarity and a little introspection, we think that the reader will agree that a 1 db change in evidence is about the smallest increment of plausibility that is perceptible to our intuition. Nobody claims that the Weber–Fechner law is a precise rule for all human sensations, but its general usefulness and appropriateness is clear; almost always it is not the absolute change, but more nearly the relative change, in some stimulus that we perceive. For an interesting account of the life and work of Gustav Theodor Fechner (1801–87), see Stigler (1986c). Now let us apply (4.13) to a specific calculation, which we shall describe as a problem of industrial quality control (although it could be phrased equally well as a problem of cryptography, chemical analysis, interpretation of a physics experiment, judging two economic theories, etc.). Following the example of Good (1950), we assume numbers which are not very realistic in order to elucidate some points of principle. Let the prior information X consist of the following statements: X ≡ We have 11 automatic machines turning out widgets, which pour out of the machines into 11 boxes. This example corresponds to a very early stage in the development of widgets, because ten of the machines produce one in six defective. The 11th machine is even worse; it makes one in three defective. The output of each machine has been collected in an unlabeled box and stored in the warehouse. We choose one of the boxes and test a few of the widgets, classifying them as ‘good’ or ‘bad’. Our job is to decide whether we chose a box from the bad machine or not; that is, whether we are going to accept this batch or reject it. Let us turn this job over to our robot and see how it performs. Firstly, it must find the prior evidence for the various propositions of interest. Let A ≡ we chose a bad batch (1/3 defective), B ≡ we chose a good batch (1/6 defective).

94

Part 1 Principles and elementary applications

The qualitative part of our prior information X told us that there are only two possibilities; so in the ‘logical environment’ generated by X , these propositions are related by negation: given X , we can say that A = B,

B = A.

(4.14)

The only quantitative prior information is that there are 11 machines and we do not know which one made our batch, so, by the principle of indifference, P(A|X ) = 1/11, and e(A|X ) = 10 log10

P(A|X ) P(A|X )

= 10 log10

(1/11) = −10 db, (10/11)

(4.15)

whereupon we have necessarily e(B|X ) = +10 db. Evidently, in this problem the only properties of X that will be relevant for the calculation are just these numbers, ±10 db. Any other kind of prior information which led to the same numbers would give us just the same mathematical problem from this point on. So, it is not necessary to say that we are talking only about a problem where there are 11 machines, and so on. There might be only one machine, and the prior information consists of our previous experience with it. Our reason for stating the problem in terms of 11 machines was that we have, thus far, only one principle, indifference, by which we can convert raw information into numerical probability assignments. We interject this remark because of a famous statement by Feller (1950) about a single machine, which we consider in Chapter 17 after accumulating some more evidence pertaining to the issue he raised. To our robot, it makes no difference how many machines there are; the only thing that matters is the prior probability for a bad batch, however this information was arrived at.2 Now, from this box we take out a widget and test it to see whether it is defective. If we pull out a bad one, what will that do to the evidence for a bad batch? That will add to it 10 log10

P(bad|A X ) P(bad|AX )

db

(4.16)

where P(bad|AX ) represents the probability for getting a bad widget, given A, etc.; these are sampling probabilities, and we have already seen how to calculate them. Our procedure is very much ‘like’ drawing from an urn, and, as in Chapter 3, on one draw our datum D now consists only of a binary choice: (good/bad). The sampling distribution P(D|H X ) 2

Notice that in this observation we have the answer to a point raised in Chapter 1: How does one make the robot ‘cognizant’ of the semantic meanings of the various propositions that it is being called upon to deal with? The answer is that the robot does not need to be ‘cognizant’ of anything. If we give it, in addition to the model and the data, a list of the propositions to be considered, with their prior probabilities, this conveys all the ‘meaning’ needed to define the robot’s mathematical problem for the applications now being considered. Later, we shall wish to design a more sophisticated robot which can also help us to assign prior probabilities by analysis of complicated but incomplete information, by the maximum entropy principle. But, even then, we can always define the robot’s mathematical problem without going into semantics.

4 Elementary hypothesis testing

95

reduces to P(bad|AX ) =

1 , 3

P(good|AX ) =

2 , 3

(4.17)

5 1 , P(good|B X ) = . (4.18) 6 6 Thus, if we find a bad widget on the first draw, this will increase the evidence for A by P(bad|B X ) =

10 log10

(1/3) = 10 log10 2 = 3 db. (1/6)

(4.19)

What happens now if we draw a second bad one? We are sampling without replacement, so as we noted in (3.11), the factor (1/3) in (4.19) should be updated to 1 2 (N /3) − 1 = − , N −1 3 3(N − 1)

(4.20)

where N is the number of widgets in the batch. But, to avoid this complication, we suppose that N is very much larger than any number that we contemplate testing; i.e. we are going to test such a negligible fraction of the batch that the proportion of bad and good ones in it is not changed appreciably by the drawing. Then the limiting form of the hypergeometric distribution (3.22) will apply, namely the binomial distribution (3.86). Thus we shall consider that, given A or B, the probability for drawing a bad widget is the same at every draw regardless of what has been drawn previously; so every bad one we draw will provide +3 db of evidence in favor of hypothesis A. Now suppose we find a good widget. Using (4.14), we get evidence for A of 10 log10

P(good|AX ) (2/3) = 10 log10 = −0.97 db, P(good|B X ) (5/6)

(4.21)

but let’s call it −1 db. Again, this will hold for any draw, if the number in the batch is sufficiently large. If we have inspected n widgets, of which we found n b bad ones and n g good ones, the evidence that we have the bad batch will be e(A|D X ) = e(A|X ) + 3n b − n g .

(4.22)

You see how easy this is to do once we have set up the logarithmic machinery. The robot’s mind is ‘driven in one direction or the other’ in a very simple, direct way. Perhaps this result gives us a deeper insight into why the Weber–Fechner law applies to intuitive plausible inference. Our ‘evidence’ function is related to the data that we have observed in about the most natural way imaginable; a given increment of evidence corresponds to a given increment of data. For example, if the first 12 widgets we test yield five bad ones, then e(A|D X ) = −10 + 3 × 5 − 7 = −2 db,

(4.23)

or, the probability for a bad batch is raised by the data from (1/11) = 0.09 to P(A|D X ) 0.4.

96

Part 1 Principles and elementary applications

In order to get at least 20 db of evidence for proposition A, how many bad widgets would we have to find in a certain sequence of n = n b + n g tests? This requires 3n b − n g = 4n b − n = n(4 f b − 1) ≥ 20,

(4.24)

so, if the fraction f b ≡ n b /n of bad ones remains greater than 1/4, we shall accumulate eventually 20 db, or any other positive amount, of evidence for A. It appears that f b = 1/4 is the threshold value at which the test can provide no evidence for either A or B over the other; but note that the +3 and −1 in (4.22) are only approximate. The exact threshold fraction of bad ones is, from (4.19) and (4.21), log 54 = 0.2435292, (4.25) ft = log(2) + log 54 in which the base of the logarithms does not matter. Sampling fractions greater (less) than this give evidence for A over B (B over A); but if the observed fraction is close to the threshold, it will require many tests to accumulate enough evidence. Now all we have here is the probability or odds or evidence, whatever you wish to call it, of the proposition that we chose the bad batch. Eventually, we have to make a decision: we’re going to accept it, or we’re going to reject it. How are we going to do that? Well, we might decide beforehand: if the probability of proposition A reaches a certain level, then we’ll decide that A is true. If it gets down to a certain value, then we’ll decide that A is false. There is nothing in probability theory per se which can tell us where to put these critical levels at which we make our decision. This has to be based on value judgments: what are the consequences of making wrong decisions, and what are the costs of making further tests? This takes us into the realm of decision theory, considered in Chapters 13 and 14. But for now it is clear that making one kind of error (accepting a bad batch) might be more serious than making the other kind of error (rejecting a good batch). That would have an obvious effect on where we place our critical levels. So we could give the robot some instructions such as ‘If the evidence for A is greater than +0 db, then reject this batch (it is more likely to be bad than good). If it goes as low as −13 db, then accept it (there is at least a 95% probability that it is good). Otherwise, continue testing.’ We start doing the tests, and every time we find a bad widget the evidence for the bad batch goes up 3 db; every time we find a good one, it goes down 1 db. The tests terminate as soon as we enter either the accept or reject region for the first time. The way described above is how our robot would do it if we told it to reject or accept on the basis that the posterior probability of proposition A reaches a certain level. This very useful and powerful procedure is called ‘sequential inference’ in the statistical literature, the term signifying that the number of tests is not determined in advance, but depends on the sequence of data values that we find; at each step in the sequence we make one of three choices: (a) stop with acceptance; (b) stop with rejection; (c) make another test. The term should not be confused with what has come to be called ‘sequential analysis with nonoptional stopping’, which is a serious misapplication of probability theory; see the discussions of optional stopping in Chapters 6 and 17.

4 Elementary hypothesis testing

97

4.3 Nonextensibility beyond the binary case The binary hypothesis testing problem turned out to have such a beautifully simple solution that we might like to extend it to the case of more than two hypotheses. Unfortunately, the convenient independent additivity over data sets in (4.13) and the linearity in (4.22) do not generalize. By ‘independent additivity’ we mean that the increment of evidence from a given datum Di depends only on Di and H ; not on what other data have been observed. As (4.11) shows, we always have additivity, but not independent additivity unless the probabilities are independent. We state the reason for this nonextensibility in the form of an exercise for the reader; to prepare for it, suppose that we have n hypotheses {H1 , . . . , Hn } which on prior information X are mutually exclusive and exhaustive: P(Hi H j |X ) = P(Hi |X )δi j ,

n

P(Hi |X ) = 1.

(4.26)

i=1

Also, we have acquired m data sets {D1 , . . . , Dm }, and as a result the probabilities of the Hi become updated in odds form by (4.7) , which now becomes O(Hi |D1 , . . . , Dm X ) = O(Hi |X )

P(D1 , . . . , Dm |Hi X ) P(D1 , . . . , Dm |H i X )

.

(4.27)

It is common that the numerator will factor because of the logical independence of the D j , given Hi : P(D j |Hi X ), 1 ≤ i ≤ n. (4.28) P(D1 , . . . , Dm |Hi X ) = j

If the denominator should also factor, P(D1 , . . . , Dm |H i X ) =

P(D j |H i X ),

1 ≤ i ≤ n,

(4.29)

j

then (4.27) would split into a product of the updates produced by each D j separately, and the log-odds formula (4.9) would again take a form independently additive over the D j as in (4.13).

Exercise 4.1. Show that there is no such nontrivial extension of the binary case. More specifically, prove that if (4.28) and (4.29) hold with n > 2, then at most one of the factors P(Dm |Hi X ) P(D1 |Hi X ) ··· (4.30) P(D1 |H i X ) P(Dm |H i X ) is different from unity, therefore at most one of the data sets D j can produce any updating of the probability for Hi .

98

Part 1 Principles and elementary applications

This has been a controversial issue in the literature of artificial intelligence (Glymour, 1985; R. W. Johnson, 1985). Those who fail to distinguish between logical independence and causal independence would suppose that (4.29) is always valid, provided only that no Di exerts a physical influence on any other D j . But we have already noted the folly of such reasoning; this is an occasion when the semantic confusion can lead to serious numerical errors. When n = 2, (4.29) follows from (4.28). But when n > 2, (4.29) is such a strong condition that it would reduce the whole problem to a triviality not worth considering; we have left it (Exercise 4.1) for the reader to examine the equations to see why this is so. Because of Cox’s theorems expounded in Chapter 2, the verdict of probability theory is that our conclusion about nonextensibility can be evaded only at the price of committing demonstrable inconsistencies in our reasoning. To head off a possible misunderstanding of what is being said here, let us add the following. However many hypotheses we have in mind, it is of course always possible to pick out two of them and compare them only against each other. This reverts to the binary choice case already analyzed, and the independent additive property holds within that smaller problem (find the status of an hypothesis relative to a single alternative). We could organize this by choosing A1 as the standard ‘null hypothesis’ and comparing each of the others with it by solving n − 1 binary problems; whereupon the relative status of any two propositions is determined. For example, if A5 and A7 are favored over A1 by 22.3 db and 31.9 db, respectively, then A7 is favored over A5 by 31.9 − 22.3 = 9.6 db. If such binary comparisons provide all the information one wants, there is no need to consider multiple hypothesis testing at all. But that would not solve our present problem; given the solutions of all these binary problems, it would still require a calculation as big as the one we are about to do to convert that information into the absolute status of any given hypothesis relative to the entire class of n hypotheses. Here we are going after the solution of the larger problem directly. In any event, we need not base our stance merely on claims of authoritarian finality for an abstract theorem; more constructively, we now show that probability theory does lead us to a definite, useful procedure for multiple hypothesis testing, which gives us a much deeper insight and makes it clear why the independent additivity cannot, and should not, hold when n > 2. It would then ignore some very cogent information; that is the demonstrable inconsistency. 4.4 Multiple hypothesis testing Suppose that something very remarkable happens in the sequential test just discussed: we tested 50 widgets and every one turned out to be bad. According to (4.22), that would give us 150 db of evidence for the proposition that we had the bad batch. e(A|E) would end up at +140 db, which is a probability which differs from unity by one part in 1014 . Now, our common sense rejects this conclusion; some kind of innate skepticism rises in us. If you test 50 widgets and you find that all 50 are bad, you are not willing to believe that you have

4 Elementary hypothesis testing

99

a batch in which only one in three are really bad. So what went wrong here? Why doesn’t our robot work in this case? We have to recognize that our robot is immature; it reasons like a four-year-old child does. The remarkable thing about small children is that you can tell them the most ridiculous things and they will accept it all with wide open eyes, open mouth, and it never occurs to them to question you. They will believe anything you tell them. Adults learn to make mental allowance for the reliability of the source when told something hard to believe. One might think that, ideally, the information which our robot should have put into its memory was not that we had either 1/3 bad or 1/6 bad; the information it should have put in was that some unreliable human said that we had either 1/3 bad or 1/6 bad. More generally, it might be useful in many problems if the robot could take into account the fact that the information it has been given may not be perfectly reliable to begin with. There is always a small chance that the prior information or data that we fed to the robot was wrong. In a real problem there are always hundreds of possibilities, and if you start out the robot with dogmatic initial statements which say that there are only two possibilities, then of course you must not expect its conclusions to make sense in every case. To accomplish this skeptically mature behavior automatically in a robot is something that we can do, when we come to consider significance tests; but fortunately, after further reflection, we realize that for most problems the present immature robot is what we want after all, because we have better control over it. We do want the robot to believe whatever we tell it; it would be dangerous to have a robot who suddenly became skeptical in a way not under our control when we tried to tell it some true but startling – and therefore highly important – new fact. But then the onus is on us to be aware of this situation, and when there is a good chance that skepticism will be needed, it is up to us to give the robot a hint about how to be skeptical for that particular problem. In the present problem we can give the hint which makes the robot skeptical about A when it sees ‘too many’ bad widgets, by providing it with one more possible hypothesis, which notes that possibility and therefore, in effect, puts the robot on the lookout for it. As before, let proposition A mean that we have a box with 1/3 defective, and proposition B is the statement that we have a box with 1/6 bad. We add a third proposition, C, that something went entirely wrong with the machine that made our widgets, and it is turning out 99% defective. Now we have to adjust our prior probabilities to take this new possibility into account. But we do not want this to be a major change in the nature of the problem; so let hypothesis C have a very low prior probability P(C|X ) of 10−6 (−60 db). We could write out X as a verbal statement which would imply this, but as in the previous footnote we can state what proposition X is, with no ambiguity at all for the robot’s purposes, simply by giving it the probabilities conditional on X , of all the propositions that we’re going to use in this problem. In that way we don’t state everything about X that is important to us conceptually; but we state everything about X that is relevant to the robot’s current mathematical problem.

100

Part 1 Principles and elementary applications

So, suppose we start out with these initial probabilities: 1 (1 − 10−6 ), 11 10 (1 − 10−6 ), P(B|X ) = 11 P(C|X ) = 10−6 , P(A|X ) =

(4.31)

where A ≡ we have a box with 1/3 defective, B ≡ we have a box with 1/6 defective, C ≡ we have a box with 99/100 defective. The factors (1 − 10−6 ) are practically negligible, and for all practical purposes we will start out with the initial values of evidence: −10 db for A, +10 db for B, −60 db for C.

(4.32)

The data proposition D stands for the statement that ‘m widgets were tested and every one was defective’. Now, from (4.9), the posterior evidence for proposition C is equal to the prior evidence plus ten times the logarithm of this probability ratio: e(C|D X ) = e(C|X ) + 10 log10

P(D|C X ) P(D|C X )

.

(4.33)

Our discussion of sampling with and without replacement in Chapter 3 shows that

99 m (4.34) P(D|C X ) = 100 is the probability that the first m are all bad, given that 99% of the machine’s output is bad, under our assumption that the total number in the box is large compared with the number m tested. We also need the probability P(D|C X ), which we can evaluate by two applications of the product rule (4.3): P(D|C X ) = P(D|X )

P(C|D X ) P(C|X )

.

(4.35)

In this problem, the prior information states dogmatically that there are only three possibilities, and so the statement C ≡ ‘C is false’ implies that either A or B must be true: P(C|D X ) = P(A + B|D X ) = P(A|D X ) + P(B|D X ),

(4.36)

4 Elementary hypothesis testing

101

where we used the general sum rule (2.66), the negative term dropping out because A and B are mutually exclusive. Similarly, P(C|X ) = P(A|X ) + P(B|X ).

(4.37)

Now, if we substitute (4.36) into (4.35), the product rule will be applicable again in the form P(AD|X ) = P(D|X )P(A|D X ) = P(A|X )P(D|AX ) P(B D|X ) = P(D|X )P(B|D X ) = P(B|X )P(D|B X ),

(4.38)

and so (4.35) becomes P(D|C X ) =

P(D|AX )P(A|X ) + P(D|B X )P(B|X ) , P(A|X ) + P(B|X )

(4.39)

in which all probabilities are known from the statement of the problem. 4.4.1 Digression on another derivation Although we have the desired result (4.39), let us note that there is another way of deriving it, which is often easier than direct application of (4.3). The principle was introduced in our derivation of (3.33): resolve the proposition whose probability is desired (in this case D) into mutually exclusive propositions, and calculate the sum of their probabilities. We can carry out this resolution in many different ways by ‘introducing into the conversation’ any set of mutually exclusive and exhaustive propositions {P, Q, R, . . .} and using the rules of Boolean algebra: D = D(P + Q + R + · · ·) = D P + D Q + D R + · · · .

(4.40)

But the success of the method depends on our cleverness at choosing a particular set for which we can complete the calculation. This means that the propositions introduced must have a known kind of relevance to the question being asked; the example of penguins at the end of Chapter 2 will not be helpful if that question has nothing to do with penguins. In the present case, for evaluation of P(D|C X ), it appears that propositions A and B have this kind of relevance. Again, we note that proposition C implies (A + B); and so P(D|C X ) = P(D(A + B)|C X ) = P(D A + D B|C X ) = P(D A|C X ) + P(D B|C X ).

(4.41)

These probabilities can be factored by the product rule: P(D|C X ) = P(D|AC X )P(A|C X ) + P(D|BC X )P(B|C X ).

(4.42)

But we can abbreviate: P(D|AC X ) ≡ P(D|AX ) and P(D|BC X ) ≡ P(D|B X ), because, in the way we set up this problem, the statement that either A or B is true implies that C must be false. For this same reason, P(C|AX ) = 1, and so, by the product rule, P(A|C X ) =

P(A|X ) P(C|X )

,

(4.43)

102

Part 1 Principles and elementary applications

and similarly for P(B|C X ). Substituting these results into (4.42) and using (4.37), we again arrive at (4.39). This agreement provides another illustration – and a rather severe test – of the consistency of our rules for extended logic. Returning to (4.39), we have the numerical value m m 1 1 1 10 , + P(D|C X ) = 3 11 6 11

(4.44)

and everything in (4.33) is now at hand. If we put all these things together, we find that the evidence for proposition C is:

99 m e(C|D X ) = −60 + 10 log10

1 11

1 m100 + 3

10 11

1 m .

(4.45)

6

If m > 5, a good approximation is e(C|D X ) −49.6 + 4.73 m,

m > 5,

(4.46)

and if m < 3, a crude approximation is e(C|D X ) −60 + 7.73 m,

m < 3.

(4.47)

Proposition C starts out at −60 db, and the first few bad widgets we find will each give about 7.73 db of evidence in favor of C, so the graph of e(C|D X ) vs. m will start upward at a slope of 7.73. But then the slope drops, when m > 5, to 4.73. The evidence for C reaches 0 db when m 49.6/4.73 = 10.5. So, ten consecutive bad widgets would be enough to raise this initially very improbable hypothesis by 58 db, to the place where the robot is ready to consider it very seriously; and 11 consecutive bad ones would take it over the threshold, to where the robot considers it more likely to be true than false. In the meantime, what is happening to our propositions A and B? As before, A starts off at −10 db, B starts off at +10 db, and the plausibility for A starts going up 3 db per defective widget. But after we’ve found too many bad ones, that skepticism would set in, and you and I would begin to doubt whether the evidence really supports proposition A after all; proposition C is becoming a much easier way to explain what is observed. Has the robot also learned to be skeptical? After m widgets have been tested, and all proved to be bad, the evidence for propositions A and B, and the approximate forms, are as follows:

m e(A|D X ) = −10 + 10 log10 1 m

1 3

− 10 + 3m

× 10−6 for m < 7

+ 49.6 − 4.73m

for m > 8

6

+

11 10

99 m 100

(4.48)

4 Elementary hypothesis testing

103

Evidence, db. 20 C 10 0 −10 −20 −30 A

.

−40 −50 Number of tests

−60 0

↓

B

5

10

15

20

Fig. 4.1. A surprising multiple sequential test wherein a dead hypothesis (C) is resurrected.

e(B|D X ) = +10 + 10 log10 1 m

3

10 − 3m 59.6 − 7.33m

1 m 6

+ 11 × 10−6 for m < 10 . for m > 11

99 m 100

(4.49)

The exact results are summarized in Figure 4.1. We can learn quite a lot about multiple hypothesis testing from studying this diagram. The initial straight line part of the A and B curves represents the solution as we found it before we introduced proposition C; the change in plausibility for propositions A and B starts off just the same as in the previous problem. The effect of proposition C does not appear until we have reached the place where C crosses B. At this point, suddenly the character of the A curve changes; instead of going on up, at m = 7 it has reached its highest value of 10 db. Then it turns around and comes back down; the robot has indeed learned how to become skeptical. But the B curve does not change at this point; it continues on linearly until it reaches the place where A and C have the same plausibility, and at this point it has a change in slope. From then on, it falls off more rapidly. Most people find all this surprising and mysterious at first glance; but then a little meditation is enough to make us perceive what is happening and why. The change in plausibility for A due to one more test arises from the fact that we are now testing hypothesis A against two alternatives: B and C. But, initially, B is so much more plausible than C, that for all

104

Part 1 Principles and elementary applications

C

4.73

Fig. 4.2. Plausibility flow diagrams.

↓

↓

↓

18.24

↓

↓

7.73

C

↓

B

19.22

↓

B

↓

3.0

↓

A

1.0

↓

BAD:

A

↓

GOOD:

↓

practical purposes we are simply testing A against B, and reproducing our previous solution (4.22). After enough evidence has accumulated to bring the plausibility for C up to the same level as B, then from that point on A is essentially being tested against C instead of B, which is a very different situation. All of these changes in slope can be interpreted in this way. Once we see this principle, it is clear that the same thing is going to be true more generally. As long as we have a discrete set of hypotheses, a change in plausibility for any one of them will be approximately the result of a test of this hypothesis against a single alternative – the single alternative being that one of the remaining hypotheses which is most plausible at that time. As the relative plausibilities of the alternatives change, the slope of the A curve must also change; this is the cogent information that would be lost if we tried to retain the independent additive form (4.13) when n > 2. Whenever the hypotheses are separated by about 10 db or more, then multiple hypothesis testing reduces approximately to testing each hypothesis against a single alternative. So, seeing this, you can construct curves of the sort shown in Fig. 4.1 very rapidly without even writing down the equations, because what would happen in the two-hypothesis case is easily seen once and for all. The diagram has a number of other interesting geometrical properties, suggested by drawing the six asymptotes and noting their vertical alignment (dotted lines), which we leave for the reader to explore. All the information needed to construct fairly accurate charts resulting from any sequence of good and bad tests is contained in the ‘plausibility flow diagrams’ of Figure 4.2, which summarize the solutions of all those binary problems; every possible way to test one proposition against a single alternative. It indicates, for example, that finding a good widget raises the evidence for B by 1 db if B is being tested against A, and by 19.22 db if it is being tested against C. Similarly, finding a bad widget raises the evidence for A by 3 db if A is being tested against B, but lowers it by 4.73 db if it is being tested against C. Likewise, we see that finding a single good widget lowers the evidence for C by an amount that cannot be recovered by two bad ones; so there is a ‘threshold of skepticism’. C will never attain an appreciable probability; i.e. the robot will never become skeptical about propositions A and B, as long as the observed fraction f of bad ones remains less than 2/3. More precisely, we define a threshold fraction f t thus: as the number of tests m → ∞ with f = m b /m → const., e(C|D X ) tends to +∞ if f > f t , and to −∞ if f < f t . The exact threshold turns out to be greater than 2/3: f t = 0.793951 (Exercise 4.2). If the observed

A

A

4 Elementary hypothesis testing

105

fraction of bad widgets remains above this value, the robot will be led eventually to prefer proposition C over A and B.

Exercise 4.2. Calculate the exact threshold of skepticism f t (x, y), supposing that proposition C has instead of 10−6 an arbitrary prior probability P(C|X ) = x, and specifies instead of 99/100 an arbitrary fraction y of bad widgets. Then discuss how the dependence on x and y corresponds – or fails to correspond – to human common sense. Hint: In problems like this, always try first to get an analytic solution in closed form. If you are unable to do this, then you must write a short computer program which will display the correct numerical values in tables or graphs.

Exercise 4.3. Show how to make the robot skeptical about both unexpectedly high and unexpectedly low numbers of bad widgets in the observed sample. Give the full equations. Note particularly the following: if A is true, then we would expect, according to the binomial distribution (3.86), that the observed fraction of bad ones would tend to about 1/3 with many tests, while if B is true it should tend to 1/6. Suppose that it is found to tend to the threshold value (4.24), close to 1/4. On sufficiently large m, you and I would then become skeptical about A and B; but intuition tells us that this would require a much larger m than ten, which was enough to make us and the robot skeptical when we find them all bad. Do the equations agree with our intuition here, if a new hypothesis F is introduced which specifies P(bad|F X ) 1/4?

In summary, the role of our new hypothesis C was only to be held in abeyance until needed, like a fire extinguisher. In a normal testing situation it is ‘dead’, playing no part in the inference because its probability is and remains far below that of the other hypotheses. But a dead hypothesis can be resurrected to life by very unexpected data. Exercises 4.2 and 4.3 ask the reader to explore the phenomenon of resurrection of dead hypotheses in more detail than we do in this chapter, but we return to the subject in Chapter 5. Figure 4.1 shows an interesting thing. Suppose we had decided to stop the test and accept hypothesis A if the evidence for it reached +6 db. As we see, it would overshoot that value at the sixth trial. If we stopped the testing at that point, then we would never see the rest of this curve and see that it really goes down again. If we had continued the testing beyond this point, then we would have changed our minds again. At first glance this seems disconcerting, but notice that it is inherent in all problems of hypothesis testing. If we stop the test at any finite number of trials, then we can never be absolutely sure that we have made the right decision. It is always possible that still more tests would have led us to change our decision. But note also that probability theory as logic has automatic built-in safety devices that can protect us against unpleasant surprises. Although it is always possible that our decision is wrong, this is extremely improbable if

106

Part 1 Principles and elementary applications

our critical level for decision requires e(A|D X ) to be large and positive. For example, if e(A|D X ) ≥ 20 db, then P(A|D X ) > 0.99, and the total probability for all the alternatives is less than 0.01; then few of us would hesitate to decide confidently in favor of A. In a real problem we may not have enough data to give such good evidence, and we might suppose that we could decide safely if the most likely hypothesis A is well separated from the alternatives, even though e(A|D X ) is itself not large. Indeed, if there are 1000 alternatives but the separation of A from the most likely alternative is more than 20 db, then the odds favor A by more than 100:1 over any one of the alternatives, and if we were obliged to make a definite choice of one hypothesis here and now, there could still be no hesitation in choosing A; it is clearly the best we can do with the information we have. Yet we cannot do it so confidently, for it is now very plausible that the decision is wrong, because the class of alternatives as a whole is about as probable as A. But probability theory warns us, by the numerical value of e(A|D X ), that this is the case; we need not be surprised by it. In scientific inference our job is always to do the best we can with whatever information we have; there is no advance guarantee that our information will be sufficient to lead us to the truth. But many of the supposed difficulties arise from an inexperienced user’s failure to recognize and use the safety devices that probability theory as logic always provides. Unfortunately, the current literature offers little help here because its viewpoint, concentrated mainly on sampling theory, directs attention to other things such as assumed sampling frequencies, as the following exercises illustrate.

Exercise 4.4. Suppose that B is in fact true; estimate how many tests it will probably require in order to accumulate an additional 20 db of evidence (above the prior 10 db) in favor of B. Show that the sampling probability that we could ever obtain 20 db of evidence for A is negligibly small, even if we sample millions of times. In other words it is, for all practical purposes, impossible for a doctrinaire zealot to sample to a foregone false conclusion merely by continuing until he finally gets the evidence he wants. Note: The calculations called for here are called ‘random walk’ problems; they are sampling theory exercises. Of course, the results are not wrong, only incomplete. Some essential aspects of inference in the real world are not recognized by sampling theory.

Exercise 4.5. The estimate asked for in Exercise 4.4 is called the ‘average sample number’ (ASN), and the original rationale for the sequential procedure (Wald, 1947) was not our derivation from probability theory as logic, but Wald’s conjecture (unproven at the time) that the sequential probability-ratio tests such as (4.19) and (4.21) minimize the ASN for a given reliability of conclusion. Discuss the validity of this conjecture; can one define the term ‘reliability of conclusion’ in such a way that the conjecture can be proved true?

4 Elementary hypothesis testing

107

Evidently, we could extend this example in many different directions. Introducing more ‘discrete’ hypotheses would be perfectly straightforward, as we have seen. More interesting would be the introduction of a continuous range of hypotheses, such as H f ≡ the machine is putting out a fraction f bad. Then, instead of a discrete prior probability distribution, our robot would have a continuous distribution in 0 ≤ f ≤ 1, and it would calculate the posterior probabilities for various values of f on the basis of the observed samples, from which various decisions could be made. In fact, although we have not yet given a formal discussion of continuous probability distributions, the extension is so easy that we can give it as an introduction to this example.

4.5 Continuous probability distribution functions Our rules for inference were derived in Chapter 2 only for the case of finite sets of discrete propositions (A, B, . . .). But this is all we ever need in practice. Suppose that f is any continuously variable real parameter of interest, then the propositions F ≡ ( f ≤ q) F ≡ ( f > q)

(4.50)

are discrete, mutually exclusive, and exhaustive; so our rules will surely apply to them. Given some information Y , the probability for F will in general depend on q, defining a function G(q) ≡ P(F |Y ),

(4.51)

which is evidently monotonic increasing. Then what is the probability that f lies in any specified interval (a < f ≤ b)? The answer is probably obvious intuitively, but it is worth noting that it is determined uniquely by the sum rule of probability theory, as follows. Define the propositions A ≡ ( f ≤ a),

B ≡ ( f ≤ b),

W ≡ (a < f ≤ b).

(4.52)

Then a relation of Boolean algebra is B = A + W , and since A and W are mutually exclusive, the sum rule reduces to P(B|Y ) = P(A|Y ) + P(W |Y ).

(4.53)

But P(B|Y ) = G(b), and P(A|Y ) = G(a), so we have the result P(a < f ≤ b|Y ) = P(W |Y ) = G(b) − G(a). In the present case, G(q) is continuous and differentiable, so we may write also b df g( f ), P(a < f ≤ b|Y ) = a

(4.54)

(4.55)

108

Part 1 Principles and elementary applications

where g( f ) = G ( f ) ≥ 0 is the derivative of G, generally called the probability distribution function, or the probability density function for f , given Y ; either reading is consistent with the abbreviation pdf which we use henceforth, following the example of Zellner (1971). Its integral G( f ) may be called the cumulative distribution function for f . Thus, limiting our basic theory to finite sets of propositions has not in any way hindered our ability to deal with continuous probability distributions; we have applied the basic product and sum rules only to discrete propositions in finite sets. As long as continuous distributions are defined as above (Eqs. (4.54), (4.55)) from a basis of finite sets of propositions, we are protected from inconsistencies by Cox’s theorems. But if we become overconfident and try to operate directly on infinite sets without considering how they are to be generated from finite sets, this protection is lost and we stand at the mercy of all the paradoxes of infinite-set theory, as discussed in Chapter 15; we can then derive sense and nonsense with equal ease. We must warn the reader about another semantic confusion which has caused error and controversy in probability theory for many decades. It would be quite wrong and misleading to call g( f ) the ‘posterior distribution of f ’, because that verbiage would imply to the unwary that f itself is varying and is ‘distributed’ in some way. This would be another form of the mind projection fallacy, confusing reality with a state of knowledge about reality. In the problem we are discussing, f is simply an unknown constant parameter; what is ‘distributed’ is not the parameter, but the probability. Use of the terminology ‘probability distribution for f ’ will be followed, in order to emphasize this constantly. Of course, nothing in probability theory forbids us to consider the possibility that f might vary with time or with circumstance; indeed, probability theory enables us to analyze that case fully, as we shall see later. But then we should recognize that we are considering a different problem than the one just discussed; it involves different quantities with different states of knowledge about them, and requires a different calculation. Confusion of these two problems is perhaps the major occupational disease of those who fool themselves by using the above misleading terminology. The pragmatic consequence is that one is led to quite wrong conclusions about the accuracy and range of validity of the results. Questions about what happens when G(q) is discontinuous at a point q0 are discussed further in Appendix B; for the present it suffices to note that, of course, approaching a discontinuous G(q) as the limit of a sequence of continuous functions leads us to the correct results. As Gauss stressed long ago, any kind of singular mathematics acquires a meaning only as a limiting form of some kind of well-behaved mathematics, and it is ambiguous until we specify exactly what limiting process we propose to use. In this sense, singular mathematics has necessarily a kind of anthropomorphic character; the question is not what is it, but rather how shall we define it so that it is in some way useful to us? In the present case, we approach the limit in such a way that the density function develops a sharper and sharper peak, going in the limit into a delta function p0 δ(q − q0 ) signifying a discrete hypothesis H0 , and enclosing a limiting area equal to the probability p0 of that hypothesis; Eq. (4.65) below is an example.

4 Elementary hypothesis testing

109

But, in fact, if we become pragmatic we note that f is not really a continuously variable parameter. In its working lifetime, a machine will produce only a finite number of widgets; if it is so well built that it makes 108 of them, then the possible values of f are a finite set of integer multiples of 10−8 . Then our finite-set theory will apply, and consideration of a continuously variable f is only an approximation to the exact discrete theory. There is never any need to consider infinite sets or measure theory in the real, exact problem. Likewise, any data set that can actually be recorded and analyzed is digitized into multiples of some smallest element. Most cases of allegedly continuously variable quantities are like this when one takes note of the actual, real-world situation.

4.6 Testing an infinite number of hypotheses In spite of the pragmatic argument just given, thinking of continuously variable parameters is often a natural and convenient approximation to a real problem (only we should not take it so seriously that we get bogged down in the irrelevancies for the real world that infinite sets and measure theory generate). So, suppose that we are now testing simultaneously an uncountably infinite number of hypotheses about the machine. As often happens in mathematics, this actually makes things simpler because analytical methods become available. However, the logarithmic form of the previous equations is now awkward, and so we will go back to the original probability form (4.3): P(A|D X ) = P(A|X )

P(D|AX ) . P(D|X )

(4.56)

Letting A now stand for the proposition ‘The fraction of bad widgets is in the range ( f, f + df)’, there is a prior pdf P(A|X ) = g( f |X )df,

(4.57)

which gives the probability that the fraction of bad widgets is in the range d f ; and let D stand for the results thus far of our experiment, D ≡ N widgets were tested and we found the results GG BG B BG · · ·, containing in all n bad ones and (N − n) good ones. Then the posterior pdf for f is given by P(A|D X ) = P(A|X )

P(D|AX ) = g( f |D X ) d f, P(D|X )

(4.58)

so the prior and posterior pdfs are related by g( f |D X ) = g( f |X )

P(D|AX ) . P(D|X )

(4.59)

The denominator is just a normalizing constant, which we could calculate directly; but usually it is easier to determine (if it is needed at all) from requiring that the posterior pdf

110

Part 1 Principles and elementary applications

satisfy the normalization condition P(0 ≤ f ≤ 1|D X ) =

1

df g( f |D X ) = 1,

(4.60)

0

which we should think of as an extremely good approximation to the exact formula, which has a sum over an enormous number of discrete values of f , instead of an integral. The evidence of the data thus lies entirely in the f dependence of P(D|AX ). At this point, let us be very careful, in view of some errors that have trapped the unwary. In this probability, the conditioning statement A specifies an interval d f , not a point value of f . Are we justified in taking an implied limit d f → 0 and replacing P(D|AX ) with P(D|H f X )? Most writers have not hesitated to do this. Mathematically, the correct procedure would be to evaluate P(D|AX ) exactly for positive d f , and pass to the limit d f → 0 only afterward. But a tricky point is that if the problem contains another parameter θ in addition to f , then this procedure is ambiguous until we take the warning of Gauss very seriously, and specify exactly how the limit is to be approached (does d f tend to zero at the same rate for all values of θ?). For example, if we set d f = h(θ) and pass to the limit → 0, our final conclusions may depend on which function h(θ) was used. Those who fail to notice this fall into the famous Borel–Kolmogorov paradox, in which a seemingly well-posed problem appears to have many different correct solutions. We shall discuss this in more detail later (Chapter 15), and show that the paradox is averted by strict adherence to our Chapter 2 rules. In the present relatively simple problem, f is the only parameter present and P(D|H f X ) is a continuous function of f ; this is surely enough to guarantee that the limit is wellbehaved and uneventful. But, just to be sure, let us take the trouble to demonstrate this by direct application of our Chapter 2 rules, keeping in mind that this continuum treatment is really an approximation to an exact discrete one. Then with d f > 0, we can resolve A into a disjunction of a finite number of discrete propositions: A = A1 + A2 + · · · + An ,

(4.61)

where A1 = H f ( f being one of the possible discrete values) and the Ai specify the discrete values of f in the interval ( f, f + df ). They are mutually exclusive, so, as we noted in Chapter 2, Eq. (2.67), application of the product rule and the sum rule gives the general result P(Ai |X )P(D|Ai X ) , (4.62) P(D|AX ) = P(D|A1 + A2 + · · · + An , X ) = i i P(Ai |X ) which is a weighted average of the separate probabilities P(D|Ai X ). This may be regarded also as a generalization of (4.39). Then if all the P(D|Ai X ) were equal, (4.62) would become independent of their prior probabilities P(Ai |X ) and equal to P(D|A1 X ) = P(D|H f X ); the fact that the conditioning statement on the left-hand side of (4.62) is a logical sum makes no difference, and P(D|AX ) would be rigorously equal to P(D|H f X ). Even if the P(D|Ai X ) are not equal, as df → 0, we have n → 1 and eventually A = A1 , with the same result.

4 Elementary hypothesis testing

111

It may appear that we have gone to extraordinary lengths to argue for an almost trivially simple conclusion. But the story of the schoolboy who made a mistake in his sums and concluded that the rules of arithmetic are all wrong, is not fanciful. There is a long history of workers who did seemingly obvious things in probability theory without bothering to derive them by strict application of the basic rules, obtained nonsensical results – and concluded that probability theory as logic was at fault. The greatest, most respected mathematicians and logicians have fallen into this trap momentarily, and some philosophers spend their entire lives mired in it; we shall see some examples in the next chapter. Such a simple operation as passing to the limit df → 0 may produce results that seem to us obvious and trivial; or it may generate a Borel–Kolmogorov paradox. We have learned from much experience that this care is needed whenever we venture into a new area of applications; we must go back to the beginning and derive everything directly from first principles applied to finite sets. If we obey the Chapter 2 rules prescribed by Cox’s theorems, we are rewarded by finding beautiful and useful results, free of contradictions. Now, if we were given that f is the correct fraction of bad widgets, then the probability for getting a bad one at each trial would be f , and the probability for getting a good one would be (1 − f ). The probabilities at different trials are, by hypothesis (i.e. one of the many statements hidden there in X ), logically independent given f , and so, as in our derivation of the binomial distribution (3.86), P(D|H f X ) = f n (1 − f ) N −n

(4.63)

(note that the experimental data D told us not only how many good and bad widgets were found, but also the order in which they appeared). Therefore, we have the posterior pdf g( f |D X ) = 1 0

f n (1 − f ) N −n g( f |X ) df f n (1 − f ) N −n g( f |X )

.

(4.64)

You may be startled to realize that all of our previous discussion in this chapter is contained in this simple looking equation, as special cases. For example, the multiple hypothesis test starting with (4.43) and including the final results (4.45)–(4.49) is all contained in (4.64) corresponding to the particular choice of prior pdf:

1 1 1 99 10 (1 − 10−6 )δ f − + (1 − 10−6 )δ f − + 10−6 δ f − . g( f |X ) = 11 6 11 3 100 (4.65) This is a case where the cumulative pdf, G( f ), is discontinuous. The three delta-functions correspond to the three discrete hypotheses B, A, C, respectively, of that example. They appear in the prior pdf (4.65) with coefficients which are the prior probabilities (4.31); and in the posterior pdf (4.64) with altered coefficients, which are just the posterior probabilities (4.45), (4.48) and (4.49). Readers who have been taught to mistrust delta-functions as ‘nonrigorous’ are urged to read Appendix B at this point. The issue has nothing to do with mathematical rigor; it is

112

Part 1 Principles and elementary applications

simply one of notation appropriate to the problem. It would be difficult and awkward to express the information conveyed in (4.65) by a single equation in Lebesgue–Stieltjes type notation. Indeed, failure to use delta-functions where they are clearly called for has led mathematicians into elementary errors, as noted in Appendix B. Suppose that at the start of this test our robot was fresh from the factory; it had no prior knowledge about the machines at all, except for our assurance that it is possible for a machine to make a good widget, and also possible for it to make a bad one. In this state of ignorance, what prior pdf g( f |X ) should it assign? If we have definite prior knowledge about f , this is the place to put it in; but we have not yet seen the principles needed to assign such priors. Even the problem of assigning priors to represent ‘ignorance’ will need much discussion later; but, for a simple result now, it may seem to the reader, as it did to Laplace 200 years ago, that in the present case the robot has no basis for assigning to any particular interval d f a higher probability than to any other interval of the same size. Thus, the only honest way it can describe what it knows is to assign a uniform prior probability density, g( f |X ) = const. This will receive a better theoretical justification later; to normalize it correctly as in (4.60) we must take g( f |X ) = 1,

0 ≤ f ≤ 1.

(4.66)

The integral in (4.64) is then the well-known Eulerian integral of the first kind, today more commonly called the complete beta-function; and (4.64) reduces to g( f |D X ) =

(N + 1)! f n (1 − f ) N −n . n! (N − n)!

(4.67)

4.6.1 Historical digression It appears that this result was first found by an amateur mathematician, the Rev. Thomas Bayes (1763). For this reason, the kind of calculations we are doing are called ‘Bayesian’. We shall follow this long-established custom, although it is misleading in several respects. The general result (4.3) is always called ‘Bayes’ theorem’, although Bayes never wrote it; and it is really nothing but the product rule of probability theory which had been recognized by others, such as James Bernoulli and A. de Moivre (1718), long before the work of Bayes. Furthermore, it was not Bayes but Laplace (1774) who first saw the result in generality and showed how to use it in real problems of inference. Finally, the calculations we are doing – the direct application of probability theory as logic – are more general than mere application of Bayes’ theorem; that is only one of several items in our toolbox. The right-hand side of (4.67) has a single peak in (0 ≤ f ≤ 1), located by differentiation at n f = fˆ ≡ , N

(4.68)

4 Elementary hypothesis testing

113

just the observed proportion, or relative frequency, of bad widgets. To find the sharpness of the peak, we write L( f ) ≡ log g( f |D X ) = n log( f ) + (N − n) log(1 − f ) + const.,

(4.69)

and expand L( f ) in a power series about fˆ. The first terms are L( f ) = L( fˆ) −

( f − fˆ)2 + ···, 2σ 2

(4.70)

where σ2 ≡

fˆ(1 − fˆ) , N

and so, to this approximation, (4.67) is a Gaussian, or normal, distribution: ( f − fˆ)2 g( f |D X ) K exp − 2σ 2

(4.71)

(4.72)

and K is a normalizing constant. Equations (4.71) and (4.72) constitute the de Moivre– Laplace theorem. It is actually an excellent approximation to (4.67) in the entire interval (0 < f < 1) in the sense that the difference of the two sides tends to zero (although their ratio does not tend to unity), provided that n 1 and (N − n) 1. Properties of the Gaussian distribution are discussed in depth in Chapter 7. Thus, after observing n bad widgets in N trials, the robot’s state of knowledge about f can be described reasonably well by saying that it considers the most likely value of f to be just the observed fraction of bad widgets, and it considers the accuracy of this estimate to be such that the interval fˆ ± σ is reasonably likely to contain the true value. The parameter σ is called the standard deviation and σ 2 is the variance of the pdf (4.72). More precisely, from numerical analysis of (4.72), the robot assigns: 50% probability that the true value of 90% probability that it is contained in 99% probability that it is contained in

f is contained in the interval fˆ ± 0.68 σ ; fˆ ± 1.65 σ ; fˆ ± 2.57 σ .

As the √number N of tests increases, these intervals shrink, according to (4.71), proportional to 1/ N , a common rule that arises repeatedly in probability theory. In this way, we see that the robot starts in a state of ‘complete ignorance’ about f ; but, as it accumulates information from the tests, it acquires more and more definite opinions about f , which correspond very nicely to common sense. Two cautions: (1) all this applies only to the case where, although the numerical value of f is initially unknown, it was one of the conditions defining the problem that f is known not to be changing with time, and (2) again we must warn against the error of calling σ the ‘variance of f ’, which would imply that f is varying, and that σ is a real (i.e. measurable) physical property of f . That is one of the most common forms of the mind projection fallacy.

114

Part 1 Principles and elementary applications

It is really necessary to belabor this point: σ is not a real property of f , but only a property of the probability distribution that the robot assigns to represent its state of knowledge about f . Two robots with different information would, naturally and properly, assign different pdfs for the same unknown quantity f , and the one which is better informed will probably – and deservedly – be able to estimate f more accurately; i.e., to use a smaller σ . But, as noted, we may consider a different problem in which f is variable if we wish to do so. Then the mean-square variation s 2 of f over some class of cases will become a ‘real’ property, in principle measurable, and the question of its relation, if any, to the σ 2 of the robot’s pdf for that problem can be investigated mathematically, as we shall do later in connection with time series. The relation will prove to be: if we know σ but have as yet no data and no other prior information about s, then the best prediction of s that we can make is essentially equal to σ ; and if we do have the data but do not know σ and have no other prior information about σ , then the best estimate of σ that we can make is nearly equal to s. These relations are mathematically derivable consequences of probability theory as logic. Indeed, it would be interesting, and more realistic for some quality-control situations, to introduce the possibility that f might vary with time, and the robot’s job is to make the best possible inferences about whether a machine is drifting slowly out of adjustment, with the hope of correcting trouble before it became serious. Many other extensions of our problem occur to us: a simple classification of widgets as good and bad is not too realistic; there is likely a continuous gradation of quality, and by taking that into account we could refine these methods. There might be several important properties instead of just ‘badness’ and ‘goodness’ (for example, if our widgets are semiconductor diodes, forward resistance, noise temperature, rf impedance, low-level rectification efficiency, etc.), and we might also have to control the quality with respect to all of these. There might be a great many different machine characteristics, instead of just H f , about which we need plausible inference. It is clear that we could spend years and write volumes on all the further ramifications of this problem, and there is already a huge literature on it. Although there is no end to the complicated details that can be generated, there is in principle no difficulty in making whatever generalization we need. It requires no new principles beyond what we have given. In the problem of detecting a drift in machine characteristics, we would want to compare our robot’s procedure with the ones proposed long ago by Shewhart (1931). We would find that Shewhart’s methods are intuitive approximations to what our robot would do; in some of the cases involving a normal distribution they are the same (but for the fact that Shewhart was not thinking sequentially; he considered the number of tests determined in advance). These are, incidentally, the only cases where Shewhart felt that his proposed methods were fully satisfactory. This is really the same problem as that of detecting a signal in noise, which we shall study in more detail later on.

4 Elementary hypothesis testing

115

4.7 Simple and compound (or composite) hypotheses The hypotheses (A, B, C, H f ) that we have considered thus far refer to a single parameter f = M/N , the unknown fraction of bad widgets in our box, and specify a sharply defined value for f (in H f , it can be any prescribed number in 0 ≤ f ≤ 1). Such hypotheses are called simple, because if we formalize this a bit more by defining an abstract ‘parameter space’ consisting of all values of the parameter or parameters that we consider to be possible, such an hypothesis is represented by a single point in . Testing all the simple hypotheses in , however, may be more than we need for our purposes. It may be that we care only whether our parameter lies in some subset 1 ∈ or in the complementary set 2 = − 1 , and the particular value of f in that subset is uninteresting (i.e. it would make no difference for what we plan to do next). Can we proceed directly to the question of interest, instead of requiring our robot to test every simple hypothesis in 1 ? The question is, to us, trivial; our starting point, Eq. (4.3), applies for all hypotheses H , simple or otherwise, so we have only to evaluate the terms in it for this case. But in (4.64) we have done almost all of that, and need only one more integration. Suppose that if f > 0.1 then we need to take some action (stop the machine and readjust it), but if f ≤ 0.1 we should allow it to continue running. The space then consists of all f in [0, 1], and we take 1 as comprising all f in [0.1, 1], H as the hypothesis that f is in 1 . Since the actual value of f is not of interest, f is now called a nuisance parameter; and we want to get rid of it. In view of the fact that the problem has no other parameter than f and different intervals d f are mutually exclusive, the discrete sum rule P(A1 + · · · + An |B) = i P(Ai |B) will surely generalize to an integral as the Ai become more and more numerous. Then the nuisance parameter f is removed by integrating it out of (4.64): P( 1 |D X ) = 1

df f n (1 − f ) N −n g( f |X ) df f n (1 − f ) N −n g( f |X )

.

(4.73)

In the case of a uniform prior pdf for f , we may use (4.64) and the result is the incomplete beta-function: the posterior probability that f is in any specified interval (a < f < b) is P(a < f < b|D X ) =

(N + 1)! n!(N − n)!

b

df f n (1 − f ) N −n ,

(4.74)

a

and in this form computer evaluation is easy. More generally, when we have any composite hypothesis to test, probability theory tells us that the proper procedure is simply to apply the principle (4.1) by summing or integrating out, with respect to appropriate priors, whatever nuisance parameters it contains. The conclusions thus found take fully into account all of the evidence contained in the data and in the prior information about the parameters. Probability theory used as logic enables us

116

Part 1 Principles and elementary applications

to test, with a single principle, any number of hypotheses, simple or compound, in the light of the data and prior information. In later chapters we shall demonstrate these properties in many quantitatively worked out examples.

4.8 Comments 4.8.1 Etymology Our opening quotation from John Craig (1699) is from a curious work on the probabilities of historical events, and how they change as the evidence changes. Craig’s work was ridiculed mercilessly in the 19th century; and, indeed, his applications to religious issues do seem weird to us today. But Stigler (1986a) notes that Craig was writing at a time when the term ‘probability’ had not yet settled down to its present technical meaning, as referring to a (0–1) scale; and if we merely interpret Craig’s ‘probability for an hypothesis’ as our log-odds measure (which we have seen to have in some respects a more primitive and intuitive meaning than probability), Craig’s reasoning was actually quite good, and may be regarded as an anticipation of what we have done in this chapter. Today, the logarithm-of-odds {u = log[ p/(1 − p)]} has proved to be such an important quantity that it deserves a shorter name; but we have had trouble finding one. Good (1950) was perhaps the first author to stress its importance in a published work, and he proposed the name lods, but the term has a leaden ring to our ears, as well as a nondescriptive quality, and it has never caught on. Our same quantity (4.8) was used by Alan Turing and I. J. Good from 1941, in classified cryptographic work in England during World War II. Good (1980) later reminisced about this briefly, and noted that Turing coined the name ‘deciban’ for it. This has not caught on, presumably because nobody today can see any rationale for it. The present writer, in his lectures of 1955–64 (for example, Jaynes, 1956), proposed the name evidence, which is intuitive and descriptive in the sense that, for given proportions, twice as many data provide twice as much evidence for an hypothesis. This was adopted by Tribus (1969), but it has not caught on either. More recently, the term logit for U ≡ log[y/(a − y)], where {yi } are some items of data and a is chosen by some convention such as a = 100, has come into use. Likewise, graphs using U for one axis are called logistic. For example, in one commercial software graphics program, an axis on which values of U are plotted is called a ‘logit axis’ and regression on that graph is called ‘logistic regression’. There is at least a mathematical similarity to what we do here, but not any very obvious conceptual relation because U is not a measure of probability. In any event, the term ‘logistic’ had already an established usage dating back to Poincar´e and Peano, as referring to the Russell–Whitehead attempt to reduce all mathematics to logic.3 3

This terminology has a much longer historical basis. Alexander the Great sought to make all countries Greek in character, but he died before completing this goal, with the result that the countries he conquered had some Greek characteristics, but not

4 Elementary hypothesis testing

117

In the face of this confusion, we propose and use the following terminology. Note that we need two terms: the name of the quantity, and the name of the units in which it is measured. For the former we have retained the name evidence, which has at least the merit that it has been defined, and used consistently with the definition, in previously published works. One can then use various different units, with different names. In this chapter we have measured evidence in decibels because of its familiarity to scientists, the ease of finding numerical values, and the connection with the base ten number system which makes the results intuitively clear.

4.8.2 What have we accomplished? The things which we have done in such a simple way in this chapter have been, in one sense, deceptive. We have had an introduction, in an atmosphere of apparent triviality, into almost every kind of problem that arises in the hypothesis testing business. But do not be deceived by the simplicity of our calculations into thinking that we have not reached the real nontrivial problems of the field. Those problems are only straightforward mathematical generalizations of what we have done here, and mathematically mature readers who have understood this chapter can now solve them for themselves, probably with less effort than it would require to find and understand the solutions available in the literature. In fact, the methods of solution that we have indicated have far surpassed, in power to yield useful results, the methods available in the conventional non-Bayesian literature of hypothesis testing. To the best of our knowledge, no comprehension of the facts of multiple hypothesis testing, as illustrated in Figure 4.1, can be found in the orthodox literature (which explains why the principles of multiple hypothesis testing have been controversial in that literature). Likewise, our form of solution of the compound hypothesis problem (4.73) will not be found in the ‘orthodox’ literature of the subject. It was our use of probability theory as logic that has enabled us to do so easily what was impossible for those who thought of probability as a physical phenomenon associated with ‘randomness’. Quite the opposite; we have thought of probability distributions as carriers of information. At the same time, under the protection of Cox’s theorems, we have avoided the inconsistencies and absurdities which are generated inevitably by those who try to deal with the problems of scientific inference by inventing ad hoc devices instead of applying the rules of probability theory. For a devastating criticism of these devices, see the book review by Pratt (1961). It is not only in hypothesis testing, however, that the foundations of the theory matter for applications. As indicated in Chapter 1 and Appendix A, our formulation was chosen with the aim of giving the theory the widest possible range of useful applications. To drive home how much the scope of solvable problems depends on the chosen foundations, the reader may try Exercise 4.6. all of them. So instead of calling them Hellenic, they were called Hellenistic. Thus, logistic implies something that has some properties of logic, but not all of them.

118

Part 1 Principles and elementary applications

Exercise 4.6. In place of our product and sum rules, Ruelle (1991, p. 17) defines the ‘mathematical presentation’ of probability theory by three basic rules: p(A) = 1 − p(A); if A and B are mutually exclusive, if A and B are independent,

p(A + B) = p(A) + p(B); p(AB) = p(A) p(B).

(4.75)

Survey the preceding two chapters, and determine how many of the applications that we solved in Chapters 3 and 4 could have been solved by application of these rules. Hint: If A and B are not independent, is p(AB) determined by them? Is the notion of conditional probability defined? Ruelle makes no distinction between logical and causal independence; he defines ‘independence’ of A and B as meaning: ‘the fact that one is realized has in the average no influence on the realization of the other’. It appears, then, that he would always accept (4.29) for all n.

This exercise makes it clear why conventional expositions do not consider scientific inference to be a part of probability theory. Indeed, orthodox statistical theory is helpless to deal with such problems because, thinking of probability as a physical phenomenon, it recognizes the existence only of sampling probabilities; thus it denies itself the technical tools needed to incorporate prior information, to eliminate nuisance parameters, or to recognize the information contained in a posterior probability. However, even most of the sampling theory results that we derived in Chapter 3 are beyond the scope of the mathematical and conceptual foundation given by Ruelle, as are virtually all of the parameter estimation results to be derived in Chapter 6. We shall find later that our way of treating compound hypotheses illustrated here also generates automatically the conventional orthodox significance tests or superior ones; and at the same time gives a clear statement of what they are testing and their range of validity, previously lacking in the orthodox literature. Now that we have seen the beginnings of this situation, before turning to more serious and mathematically more sophisticated problems, we shall relax and amuse ourselves in the next chapter by examining how probability theory as logic can clear up all kinds of weird errors, in the older literature, that arose from very simple misuse of probability theory, but whose consequences were relatively trivial. In Chapters 15 and 17 we consider some more complicated and serious errors that are causing major confusion in the current literature.

5 Queer uses for probability theory

I cannot conceal the fact here that in the specific application of these rules, I foresee many things happening which can cause one to be badly mistaken if he does not proceed cautiously. James Bernoulli (1713, Part 4, Chapter III) I. J. Good (1950) has shown how we can use probability theory backwards to measure our own strengths of belief about propositions. For example, how strongly do you believe in extrasensory perception?

5.1 Extrasensory perception What probability would you assign to the hypothesis that Mr Smith has perfect extrasensory perception? More specifically, that he can guess right every time which number you have written down. To say zero is too dogmatic. According to our theory, this means that we are never going to allow the robot’s mind to be changed by any amount of evidence, and we don’t really want that. But where is our strength of belief in a proposition like this? Our brains work pretty much the way this robot works, but we have an intuitive feeling for plausibility only when it’s not too far from 0 db. We get fairly definite feelings that something is more than likely to be so or less than likely to be so. So the trick is to imagine an experiment. How much evidence would it take to bring your state of belief up to the place where you felt very perplexed and unsure about it? Not to the place where you believed it – that would overshoot the mark, and again we’d lose our resolving power. How much evidence would it take to bring you just up to the point where you were beginning to consider the possibility seriously? So, we consider Mr Smith, who says he has extrasensory perception (ESP), and we will write down some numbers from one to ten on a piece of paper and ask him to guess which numbers we’ve written down. We’ll take the usual precautions to make sure against other ways of finding out. If he guesses the first number correctly, of course we will all say ‘you’re a very lucky person, but I don’t believe you have ESP’. And if he guesses two numbers correctly, we’ll still say ‘you’re a very lucky person, but I still don’t believe you have ESP’. 119

120

Part 1 Principles and elementary applications

By the time he’s guessed four numbers correctly – well, I still wouldn’t believe it. So my state of belief is certainly lower than −40 db. How many numbers would he have to guess correctly before you would really seriously consider the hypothesis that he has extrasensory perception? In my own case, I think somewhere around ten. My personal state of belief is, therefore, about −100 db. You could talk me into a ±10 db change, and perhaps as much as ±30 db, but not much more than that. After further thought, we see that, although this result is correct, it is far from the whole story. In fact, if he guessed 1000 numbers correctly, I still would not believe that he has ESP, for an extension of the same reason that we noted in Chapter 4 when we first encountered the phenomenon of resurrection of dead hypotheses. An hypothesis A that starts out down at −100 db can hardly ever come to be believed, whatever the data, because there are almost sure to be alternative hypotheses (B1 , B2 , . . .) above it, perhaps down at −60 db. Then, when we obtain astonishing data that might have resurrected A, the alternatives will be resurrected instead. Let us illustrate this by two famous examples, involving telepathy and the discovery of Neptune. Also we note some interesting variants of this. Some are potentially useful, some are instructive case histories of probability theory gone wrong, in the way Bernoulli warned us about.

5.2 Mrs Stewart’s telepathic powers Before venturing into this weird area, the writer must issue a disclaimer. I was not there, and am not in a position to affirm that the experiment to be discussed actually took place; or, if it did, that the data were actually obtained in a valid way. Indeed, that is just the problem that you and I always face when someone tries to persuade us of the reality of ESP or some other marvellous thing – such things never happen to us or in our presence. All we are able to affirm is that the experiment and data have been reported in a real, verifiable reference (Soal and Bateman, 1954). This is the circumstance that we want to analyze now by probability theory. Lindley (1957) and Bernardo (1980) have also taken note of it from the standpoint of probability theory, and Boring (1955) discusses it from the standpoint of psychology. In the reported experiment, from the experimental design the probability for guessing a card correctly should have been p = 0.2, independently in each trial. Let H p be the ‘null hypothesis’ which states this, and supposes that only ‘pure chance’ is operating (whatever that means). According to the binomial distribution (3.86), H p predicts that if a subject has no ESP, the number r of successful guesses in n trials should be about (mean ± standard deviation) (5.1) (r )est = np ± np(1 − p). For n = 37 100 trials, this is 7420 ± 77. But, according to the report, Mrs Gloria Stewart guessed correctly r = 9410 times in 37100 trials, for a fractional success rate of f = 0.2536. These numbers constitute

5 Queer uses for probability theory

121

our data D. At first glance, they may not look very sensational; note, however, that her score was 9410 − 7420 = 25.8 77 standard deviations away from the chance expectation. The probability for getting these data, on hypothesis H p , is then the binomial

n r P(D|H p ) = p (1 − p)n−r . r

(5.2)

(5.3)

But the numbers n, r are so large that we need the Stirling approximation to the binomial, derived in Chapter 9: P(D|H p ) = A exp{n H ( f, p)}, where H ( f, p) = f log

1− p p + (1 − f ) log = −0.008452 f 1− f

(5.4)

(5.5)

is the entropy of the observed distribution ( f, 1 − f ) = (0.2536, 0.7464) relative to the expected one, ( p, 1 − p) = (0.2000, 0.8000), and n = 0.00476. (5.6) A≡ 2π r (n − r ) Then we may take as the likelihood L p of H p , the sampling probability L p = P(D|H p ) = 0.00476 exp{−313.6} = 3.15 × 10−139 .

(5.7)

This looks fantastically small; however, before jumping to conclusions, the robot should ask: ‘Are the data also fantastically improbable on the hypothesis that Mrs Stewart has telepathic powers?’ If they are, then (5.7) may not be so significant after all. Consider the Bernoulli class of alternative hypotheses Hq (0 ≤ q ≤ 1), which suppose that the trials are independent, but that assign different probabilities of success q to Mrs Stewart (q > 0.2 if the hypothesis considers her to be telepathic). Out of this class, the hypothesis H f that assigns q = f = 0.2536 yields the greatest P(D|Hq ) that can be attained in the Bernoulli class, and for this the entropy (5.5) is zero, yielding a maximum likelihood of L f = P(D|H f ) = A = 0.00476.

(5.8)

So, if the robot knew for a fact that Mrs Stewart is telepathic to the extent of q = 0.2536, then the probability that she could generate the observed data would not be particularly small. Therefore, the smallness of (5.7) is indeed highly significant; for then the likelihood ratio for the two hypotheses must be fantastically small. The relative likelihood depends

122

Part 1 Principles and elementary applications

only on the entropy factor: Lp P(D|H p ) = exp{n H } = exp{−313.6} = 6.61 × 10−137 , = Lf P(D|H f )

(5.9)

and the robot would report: ‘The data do indeed support H f over H p by an enormous factor.’

5.2.1 Digression on the normal approximation Note, in passing, that in this calculation large errors could be made by unthinking use of the normal approximation to the binomial, also derived in Chapter 9 (or compare with (4.72)): −n( f − p)2 . (5.10) P(D|H p , X ) (const.) × exp 2 p(1 − p) To use it here instead of the entropy approximation (5.4), amounts to replacing the entropy H ( f, p) by the first term of its power series expansion about the peak. Then we would have found instead a likelihood ratio exp{−333.1}. Thus, the normal approximation would have made Mrs Stewart appear even more marvellous than the data indicate, by an additional odds ratio factor of exp{333.1 − 313.6} = exp{19.5} = 2.94 × 108 .

(5.11)

This should warn us that, quite generally, normal approximations cannot be trusted far out in the tails of a distribution. In this case, we are 25.8 standard deviations out, and the normal approximation is in error by over eight orders of magnitude. Unfortunately, this is just the approximation used by the chi-squared test discussed later, which can therefore lead us to wildly misleading conclusions when the ‘null hypothesis’ being tested fits the data very poorly. Those who use the chi-squared test to support their claims of marvels are usually helping themselves by factors such as (5.11). In practice, the entropy calculation (5.5) is just as easy and far more trustworthy (although the entropy and chi-squared test amount to the same thing within one or two standard deviations of the peak).

5.2.2 Back to Mrs Stewart In any event, our present numbers are indeed fantastic; on the basis of such a result, ESP researchers would proclaim a virtual certainty that ESP is real. If we compare H p and H f by probability theory, the posterior probability that Mrs Stewart has ESP to the extent of q = f = 0.2536 is P(H f |D X ) = P(H f |X )

Pf L f P(D|H f X ) = , P(D|X ) P f L f + Pp L p

(5.12)

where Pp , P f are the prior probabilities of H p , H f . But, because of (5.9), it hardly matters what these prior probabilities are; in the view of an ESP researcher who does not consider

5 Queer uses for probability theory

123

the prior probability P f = P(H f |X ) particularly small, P(H f |D X ) is so close to unity that its decimal expression starts with over 100 nines. He will then react with anger and dismay when, in spite of what he considers this overwhelming evidence, we persist in not believing in ESP. Why are we, as he sees it, so perversely illogical and unscientific? The trouble is that the above calculations, (5.9) and (5.12), represent a very na¨ıve application of probability theory, in that they consider only H p and H f , and no other hypotheses. If we really knew that H p and H f were the only possible ways the data (or, more precisely, the observable report of the experiment and data) could be generated, then the conclusions that follow from (5.9) and (5.12) would be perfectly all right. But, in the real world, our intuition is taking into account some additional possibilities that they ignore. Probability theory gives us the results of consistent plausible reasoning from the information that was actually used in our calculation. It can lead us wildly astray, as Bernoulli noted in our opening quotation, if we fail to use all the information that our common sense tells us is relevant to the question we are asking. When we are dealing with some extremely implausible hypothesis, recognition of a seemingly trivial alternative possibility can make many orders of magnitude difference in the conclusions. Taking note of this, let us show how a more sophisticated application of probability theory explains and justifies our intuitive doubts. Let H p , H f , and L p , L f , Pp , P f be as above; but now we introduce some new hypotheses about how this report of the experiment and data might have come about, which will surely be entertained by the readers of the report even if they are discounted by its writers. These new hypotheses (H1 , H2 , . . . , Hk ) range all the way from innocent possibilities, such as unintentional error in the record keeping, through frivolous ones (perhaps Mrs Stewart was having fun with those foolish people, with the aid of a little mirror that they did not notice), to less innocent possibilities such as selection of the data (not reporting the days when Mrs Stewart was not at her best), to deliberate falsification of the whole experiment for wholly reprehensible motives. Let us call them all, simply, ‘deception’. For our purposes, it does not matter whether it is we or the researchers who are being deceived, or whether the deception was accidental or deliberate. Let the deception hypotheses have likelihoods and prior probabilities L i , Pi , i = (1, 2, . . . , k). There are, perhaps, 100 different deception hypotheses that we could think of and are not too far-fetched to consider, although a single one would suffice to make our point. In this new logical environment, what is the posterior probability for the hypothesis H f that was supported so overwhelmingly before? Probability theory now tells us that P(H f |D X ) =

Pf L f . P f L f + Pp L p + Pi L i

(5.13)

Introduction of the deception hypotheses has changed the calculation greatly; in order for P(H f |D X ) to come anywhere near unity it is now necessary that Pi L i P f L f . (5.14) Pp L p + i

124

Part 1 Principles and elementary applications

Let us suppose that the deception hypotheses have likelihoods L i of the same order as L f in (5.8); i.e. a deception mechanism could produce the reported data about as easily as could a truly telepathic Mrs Stewart. From (5.7), Pp L p is completely negligible, so (5.14) is not greatly different from (5.15) Pi P f . But each of the deception hypotheses is, in my judgment, more likely than H f , so there is not the remotest possibility that the inequality (5.15) could ever be satisfied. Therefore, this kind of experiment can never convince me of the reality of Mrs Stewart’s ESP; not because I assert P f = 0 dogmatically at the start, but because the verifiable facts can be accounted for by many alternative hypotheses, every one of which I consider inherently more plausible than H f , and none of which is ruled out by the information available to me. Indeed, the very evidence which the ESP’ers throw at us to convince us, has the opposite effect on our state of belief; issuing reports of sensational data defeats its own purpose. For if the prior probability for deception is greater than that of ESP, then the more improbable the alleged data are on the null hypothesis of no deception and no ESP, the more strongly we are led to believe, not in ESP, but in deception. For this reason, the advocates of ESP (or any other marvel) will never succeed in persuading scientists that their phenomenon is real, until they learn how to eliminate the possibility of deception in the mind of the reader. As (5.15) shows, the reader’s total prior probability for deception by all mechanisms must be pushed down below that of ESP. It is interesting that Laplace perceived this phenomenon long ago. His Essai Philosophique sur les Probabilit´es (1814, 1819) has a long chapter on the ‘Probabilities of testimonies’, in which he calls attention to ‘the immense weight of testimonies necessary to admit a suspension of natural laws’. He notes that those who make recitals of miracles, decrease rather than augment the belief which they wish to inspire; for then those recitals render very probable the error or the falsehood of their authors. But that which diminishes the belief of educated men often increases that of the uneducated, always avid for the marvellous.

We observe the same phenomenon at work today, not only in the ESP enthusiast, but in the astrologer, reincarnationist, exorcist, fundamentalist preacher or cultist of any sort, who attracts a loyal following among the uneducated by claiming all kinds of miracles, but has zero success in converting educated people to his teachings. Educated people, taught to believe that a cause–effect relation requires a physical mechanism to bring it about, are scornful of arguments which invoke miracles; but the uneducated seem actually to prefer them. Note that we can recognize the clear truth of this psychological phenomenon without taking any stand about the truth of the miracle; it is possible that the educated people are wrong. For example, in Laplace’s youth educated persons did not believe in meteorites, but dismissed them as ignorant folklore because they are so rarely observed. For one familiar

5 Queer uses for probability theory

125

with the laws of mechanics the notion that ‘stones fall from the sky’ seemed preposterous, while those without any conception of mechanical law saw no difficulty in the idea. But the fall at Laigle in 1803, which left fragments studied by Biot and other French scientists, changed the opinions of the educated – including Laplace himself. In this case, the uneducated, avid for the marvellous, happened to be right: c’est la vie. Indeed, in the course of writing this chapter, the writer found himself a victim of this phenomenon. In the 1987 Ph.D. thesis of G. L. Bretthorst, and more fully in Bretthorst (1988), we applied Bayesian analysis to estimation of frequencies of nonstationary sinusoidal signals, such as exponential decay in nuclear magnetic resonance (NMR) data, or chirp in oceanographic waves. We found – as was expected on theoretical grounds – an improved resolution over the previously used Fourier transform methods. If we had claimed a 50% improvement, we would have been believed at once, and other researchers would have adopted this method eagerly. But, in fact, we found orders of magnitude improvement in resolution. It was, in retrospect, foolish of us to mention this at the outset, for in the minds of others the prior probability that we were irresponsible charlatans was greater than the prior probability that a new method could possibly be that good; and we were not at first believed. Fortunately, we were able, by presenting many numerical analyses of data and distributing free computer programs so that doubters could check our claims for themselves on whatever data they chose, to eliminate the possibility of deception in the minds of our audience, and the method did find acceptance after all. The Bayesian analyses of free decay NMR signals now permits experimentalists to extract much more information from their data than was possible by taking Fourier transforms. The reader should be warned, however, that our probability analysis (5.13) of Mrs Stewart’s performance is still rather na¨ıve in that it neglects correlations; having seen a persistent deviation from the chance expectation p = 0.2 in the first few hundred trials, common sense would lead us to form the hypothesis that some unknown systematic cause is at work, and we would come to expect the same deviation in the future. This would alter the numerical values given above, but not enough to change our general conclusions. More sophisticated probability models which are able to take such things into account are given in our discussions of advanced applications later; relevant topics are Dirichlet priors, exchangeable sequences, and autoregressive models. Now let us return to that original device of I. J. Good, which started this train of thought. After all this analysis, why do we still hold that na¨ıve first answer of −100 db for my prior probability for ESP, as recorded above, to be correct? Because Jack Good’s imaginary device can be applied to whatever state of knowledge we choose to imagine; it need not be the real one. If I knew that true ESP and pure chance were the only possibilities, then the device would apply and my assignment of −100 db would hold. But, knowing that there are other possibilities in the real world does not change my state of belief about ESP; so the figure of −100 db still holds. Therefore, in the present state of development of probability theory, the device of imaginary results is usable and useful in a very wide variety of situations, where we might not at

126

Part 1 Principles and elementary applications

first think it applicable. We shall find it helpful in many cases where our prior information seems at first too vague to lead to any definite prior probabilities; it stimulates our thinking and tells us how to assign them after all. Perhaps in the future we shall have more formal principles that make it unnecessary.

Exercise 5.1. By applying the device of imaginary results, find your own strength of belief in any three of the following propositions: (1) Julius Caesar is a real historical person (i.e. not a myth invented by later writers); (2) Achilles is a real historical person; (3) the Earth is more than a million years old; (4) dinosaurs did not die out; they are still living in remote places; (5) owls can see in total darkness; (6) the configuration of the planets influences our destiny; (7) automobile seat belts do more harm than good; (8) high interest rates combat inflation; (9) high interest rates cause inflation. Hint: Try to imagine a situation in which the proposition H0 being tested, and a single alternative H1 , would be the only possibilities, and you receive new ‘data’ D consistent with H0 : P(D|H0 ) 1. The imaginary alternative and data are to be such that you can calculate the probability P(D|H1 ). Always use an H0 that you are inclined not to believe; if the proposition as stated seems highly plausible to you, then for H0 choose its denial. Much more has been written about the Soal experiments in ESP. The deception hypothesis, already strongly indicated by our probability analysis, is supported by additional evidence (Hansel, 1980; Kurtz, 1985). Altogether, an appalling amount of effort has been expended on this incident, and it might appear that the only result was to provide a pedagogical example of the use of probability theory with very unlikely hypotheses. Can anything more useful be salvaged from it? We think that this incident has some lasting value both for psychology and for probability theory, because it has made us aware of an important general phenomenon, which has nothing to do with ESP; a person may tell the truth and not be believed, even though the disbelievers are reasoning in a rational, consistent way. To the best of our knowledge it has not been noted before that probability theory as logic automatically reproduces and explains this phenomenon. This leads us to conjecture that it may generalize to other more complex and puzzling psychological phenomena. 5.3 Converging and diverging views Suppose that two people, Mr A and Mr B have differing views (due to their differing prior information) about some issue, say the truth or falsity of some controversial proposition S. Now we give them both a number of new pieces of information or ‘data’, D1 , D2 , . . . , Dn , some favorable to S, some unfavorable. As n increases, the totality of their information comes to be more nearly the same, therefore we might expect that their opinions about S will converge toward a common agreement. Indeed, some authors consider this so obvious

5 Queer uses for probability theory

127

that they see no need to demonstrate it explicitly, while Howson and Urbach (1989, p. 290) claim to have demonstrated it. Nevertheless, let us see for ourselves whether probability theory can reproduce such phenomena. Denote the prior information by I A , I B , respectively, and let Mr A be initially a believer, Mr B a doubter: P(S|I A ) 1,

P(S|I B ) 0;

(5.16)

after receiving data D, their posterior probabilities are changed to P(S|D I A ) = P(S|I A )

P(D|S I A ) P(D|I A )

P(D|S I B ) . P(S|D I B ) = P(S|I B ) P(D|I B )

(5.17)

If D supports S, then since Mr A already considers S almost certainly true, we have P(D|S I A ) P(D|I A ), and so P(S|D I A ) P(S|I A ).

(5.18)

Data D have no appreciable effect on Mr A’s opinion. But now one would think that if Mr B reasons soundly, he must recognize that P(D|S I B ) > P(D|I B ), and thus P(S|D I B ) > P(S|I B ).

(5.19)

Mr B’s opinion should be changed in the direction of Mr A’s. Likewise, if D had tended to refute S, one would expect that Mr B’s opinions are little changed by it, whereas Mr A’s will move in the direction of Mr B’s. From this we might conjecture that, whatever the new information D, it should tend to bring different people into closer agreement with each other, in the sense that |P(S|D I A ) − P(S|D I B )| < |P(S|I A ) − P(S|I B )|.

(5.20)

Although this can be verified in special cases, it is not true in general. Is there some other measure of ‘closeness of agreement’ such as log[P(S|D I A )/ P(S|D I B )], for which this converging of opinions can be proved as a general theorem? Not even this is possible; the failure of probability theory to give this expected result tells us that convergence of views is not a general phenomenon. For robots and humans who reason according to the consistency desiderata of Chapter 1, something more subtle and sophisticated is at work. Indeed, in practice we find that this convergence of opinions usually happens for small children; for adults it happens sometimes but not always. For example, new experimental evidence does cause scientists to come into closer agreement with each other about the explanation of a phenomenon. Then it might be thought (and for some it is an article of faith in democracy) that open discussion of public issues would tend to bring about a general consensus on them. On the contrary, we observe repeatedly that when some controversial issue has been discussed

128

Part 1 Principles and elementary applications

vigorously for a few years, society becomes polarized into opposite extreme camps; it is almost impossible to find anyone who retains a moderate view. The Dreyfus affair in France, which tore the nation apart for 20 years, is one of the most thoroughly documented examples of this (Bredin, 1986). Today, such issues as nuclear power, abortion, criminal justice, etc., are following the same course. New information given simultaneously to different people may cause a convergence of views; but it may equally well cause a divergence. This divergence phenomenon is observed also in relatively well-controlled psychological experiments. Some have concluded that people reason in a basically irrational way; prejudices seem to be strengthened by new information which ought to have the opposite effect. Kahneman and Tversky (1972) draw the opposite conclusion from such psychological tests, and consider them an argument against Bayesian methods. But now, in view of the above ESP example, we wonder whether probability theory might also account for this divergence and indicate that people may be, after all, thinking in a reasonably rational, Bayesian way (i.e. in a way consistent with their prior information and prior beliefs). The key to the ESP example is that our new information was not S ≡ fully adequate precautions against error or deception were taken, and Mrs Stewart did in fact deliver that phenomenal performance.

(5.21)

It was that some ESP researcher has claimed that S is true. But if our prior probability for S is lower than our prior probability that we are being deceived, hearing this claim has the opposite effect on our state of belief from what the claimant intended. The same is true in science and politics; the new information a scientist gets is not that an experiment did in fact yield this result, with adequate protection against error. It is that some colleague has claimed that it did. The information we get from the TV evening news is not that a certain event actually happened in a certain way; it is that some news reporter has claimed that it did.1 Scientists can reach agreement quickly because we trust our experimental colleagues to have high standards of intellectual honesty and sharp perception to detect possible sources of error. And this belief is justified because, after all, hundreds of new experiments are reported every month, but only about once in a decade is an experiment reported that turns out later to have been wrong. So our prior probability for deception is very low; like trusting children, we believe what experimentalists tell us. In politics, we have a very different situation. Not only do we doubt a politician’s promises, few people believe that news reporters deal truthfully and objectively with economic, social, or political topics. We are convinced that virtually all news reporting is selective and distorted, designed not to report the facts, but to indoctrinate us in the reporter’s socio-political views. And this belief is justified abundantly by the internal evidence in the reporter’s own product – every choice of words and inflection of voice shifting the bias invariably in the same direction. 1

Even seeing the event on our screens can no longer convince us, after recent revelations that all major US networks had faked some videotapes of alleged news events.

5 Queer uses for probability theory

129

Not only in political speeches and news reporting, but wherever we seek for information on political matters, we run up against this same obstacle; we cannot trust anyone to tell us the truth, because we perceive that everyone who wants to talk about it is motivated either by self-interest or by ideology. In political matters, whatever the source of information, our prior probability for deception is always very high. However, it is not obvious whether this alone can prevent us from coming to agreement. With this in mind, let us re-examine the equations of probability theory. To compare the reasoning of Mr A and Mr B, we could write Bayes’ theorem (5.17) in the logarithmic form P(S|I A ) P(D|S I A ) P(D|I B ) P(S|D I A ) = log + log , (5.22) log P(S|D I B ) P(S|I B ) P(D|I A ) P(D|S I B ) which might be described by a simple hand-waving mnemonic like log posterior = log prior + log likelihood.

(5.23)

Note, however, that (5.22) differs from our log-odds equations of Chapter 4, which might be described by the same mnemonic. There we compared different hypotheses, given the same prior information, and some factors P(D|I ) cancelled out. Here we are considering a fixed hypothesis S, in the light of different prior information, and they do not cancel, so the ‘likelihood’ term is different. In the above, we supposed Mr A to be the believer, so log (prior) > 0. Then it is clear that on the log scale their views will converge as expected, the left-hand side of (5.22) tending to zero monotonically (i.e. Mr A will remain a stronger believer than Mr B) if − log(prior) < log(likelihood) < 0,

(5.24)

and they will diverge monotonically if log(likelihood) > 0.

(5.25)

But they will converge with reversal (Mr B becomes a stronger believer than Mr A) if −2 log(prior) < log(likelihood) < − log(prior),

(5.26)

and they will diverge with reversal if log(likelihood) < −2 log(prior).

(5.27)

Thus, probability theory appears to allow, in principle, that a single piece of new information D could have every conceivable effect on their relative states of belief. But perhaps there are additional restrictions, not yet noted, which make some of these outcomes impossible; can we produce specific and realistic examples of all four types of behavior? Let us examine only the monotonic convergence and divergence by the following scenario, leaving it as an exercise for the reader to make a similar examination of the reversal phenomena. The new information D is: ‘Mr N has gone on TV with a sensational claim that a commonly used drug is unsafe’, and three viewers, Mr A, Mr B, and Mr C, see this. Their

130

Part 1 Principles and elementary applications

prior probabilities P(S|I ) that the drug is safe are (0.9, 0.1, 0.9), respectively; i.e. initially, Mr A and Mr C were believers in the safety of the drug, Mr B a disbeliever. But they interpret the information D very differently, because they have different views about the reliability of Mr N . They all agree that, if the drug had really been proved unsafe, Mr N would be right there shouting it: that is, their probabilities P(D|S I ) are (1, 1, 1); but Mr A trusts his honesty while Mr C does not. Their probabilities P(D|S I ) that, if the drug is safe, Mr N would say that it is unsafe, are (0.01, 0.3, 0.99), respectively. Applying Bayes’ theorem P(S|D I ) = P(S|I ) P(D|S I )/P(D|I ), and expanding the denominator by the product and sum rules, P(D|I ) = P(S|I ) P(D|S I ) + P(S|I ) P(D|S I ), we find their posterior probabilities that the drug is safe to be (0.083, 0.032, 0.899), respectively. Put verbally, they have reasoned as follows: A ‘Mr N is a fine fellow, doing a notable public service. I had thought the drug to be safe from other evidence, but he would not knowingly misrepresent the facts; therefore hearing his report leads me to change my mind and think that the drug is unsafe after all. My belief in safety is lowered by 20.0 db, so I will not buy any more.’ B ‘Mr N is an erratic fellow, inclined to accept adverse evidence too quickly. I was already convinced that the drug is unsafe; but even if it is safe he might be carried away into saying otherwise. So, hearing his claim does strengthen my opinion, but only by 5.3 db. I would never under any circumstances use the drug.’ C ‘Mr N is an unscrupulous rascal, who does everything in his power to stir up trouble by sensational publicity. The drug is probably safe, but he would almost certainly claim it is unsafe whatever the facts. So hearing his claim has practically no effect (only 0.005 db) on my confidence that the drug is safe. I will continue to buy it and use it.’

The opinions of Mr A and Mr B converge in about the way we conjectured in (5.20) because both are willing to trust Mr N ’s veracity to some extent. But Mr A and Mr C diverge because their prior probabilities of deception are entirely different. So one cause of divergence is not merely that prior probabilities of deception are large, but that they are greatly different for different people. This is not the only cause of divergence, however; to show this we introduce Mr X and Mr Y , who agree in their judgment of Mr N : P(D|S I X ) = P(D|S IY ) = a,

P(D|S I X ) = P(D|S IY ) = b.

(5.28)

If a < b, then they consider him to be more likely to be telling the truth than lying. But they have different prior probabilities for the safety of the drug: P(S|I X ) = x,

P(S|IY ) = y.

(5.29)

Their posterior probabilities are then P(S|D I X ) =

ax , ax + b(1 − x)

P(S|D IY ) =

ay , ay + b(1 − y)

(5.30)

5 Queer uses for probability theory

131

from which we see that not only are their opinions always changed in the same direction, on the evidence scale they are always changed by the same amount, log(a/b): a x P(S|D I X ) = log + log log 1−x b P(S|D I X ) (5.31) a y P(S|D IY ) = log + log . log 1−y b P(S|D IY ) This means that, on the probability scale, they can either converge or diverge – see Exercise 5.2. These equations correspond closely to those in our sequential widget test in Chapter 4, but have now a different interpretation. If a = b, then they consider Mr N totally unreliable and their views are unchanged by his testimony. If a > b, they distrust Mr N so much that their opinions are driven in the opposite direction from what he intended. Indeed, if b → 0, then log(a/b) → ∞; they consider it certain that he is lying, and so they are both driven to complete belief in the safety of the drug: P(S|D I X ) = P(S|D IY ) = 1, independently of their prior probabilities.

Exercise 5.2. From these equations, find the exact conditions on (x, y, a, b) for divergence on the probability scale; that is, |P(S|D I X ) − P(S|D IY )| > |P(S|I X ) − P(S|IY )|.

(5.32)

Exercise 5.3. It is evident from (5.31) that Mr X and Mr Y can never experience a reversal of viewpoint; that is, if initially Mr X believes more strongly than Mr Y in the safety of the drug, this will remain true whatever the values of a, b. Therefore, a necessary condition for reversal must be that they have different opinions about Mr N ; ax = a y and/or bx = b y . But this does not prove that reversal is actually possible, so more analysis is needed. If reversal is possible, find a sufficient condition on (x, y, ax , a y , bx , b y ) for this to take place, and illustrate it by a verbal scenario like the above. If it is not possible, prove this and explain the intuitive reason why reversal cannot happen.

We see that divergence of opinions is readily explained by probability theory as logic, and that it is to be expected when persons have widely different prior information. But where was the error in the reasoning that led us to conjecture (5.20)? We committed a subtle form of the mind projection fallacy by supposing that the relation ‘D supports S’ is an absolute property of the propositions D and S. We need to recognize the relativity of it; whether D does or does not support S depends on our prior information. The same D that supports S for one person may refute it for another. As soon as we recognize this, then we no longer

132

Part 1 Principles and elementary applications

expect anything like (5.20) to hold in general. This error is very common; we shall see another example of it in Section 5.7. Kahneman and Tversky (1972) claimed that we are not Bayesians, because in psychological tests people often commit violations of Bayesian principles. However, this claim is seen differently in view of what we have just noted. We suggest that people are reasoning according to a more sophisticated version of Bayesian inference than they had in mind. This conclusion is strengthened by noting that similar things are found even in deductive logic. Wason and Johnson-Laird (1972) report psychological experiments in which subjects erred systematically in simple tests which amounted to applying a single syllogism. It seems that when asked to test the hypothesis ‘A implies B’, they had a very strong tendency to consider it equivalent to ‘B implies A’ instead of ‘not-B implies not-A’. Even professional logicians could err in this way.2 Strangely enough, the nature of this error suggests a tendency toward Bayesianity, the opposite of the Kahneman–Tversky conclusion. For, if A supports B in the sense that for some X , P(B|AX ) > P(B|X ), then Bayes’ theorem states that B supports A in the same sense: P(A|B X ) > P(A|X ). But it also states that P(A|B X ) > P(A|X ), corresponding to the syllogism. In the limit P(B|AX ) → 1, Bayes’ theorem does not give P(A|B X ) → 1, but gives P(A|B X ) → 1, in agreement with the syllogism, as we noted in Chapter 2. Errors made in staged psychological tests may indicate only that the subjects were pursuing different goals than the psychologists; they saw the tests as basically foolish, and did not think it worth making any mental effort before replying to the questions – or perhaps even thought that the psychologists would be more pleased to see them answer wrongly. Had they been faced with logically equivalent situations where their interests were strongly involved (for example, avoiding a serious accidental injury), they might have reasoned better. Indeed, there are stronger grounds – Darwinian natural selection – for expecting that we would reason in a basically Bayesian way. 5.4 Visual perception – evolution into Bayesianity? Another class of psychological experiments fits nicely into this discussion. In the early 20th century, Adelbert Ames Jr was Professor of Physiological Optics at Dartmouth College. He devised ingenious experiments which fool one into ‘seeing’ something very different from the reality – one misjudges the size, shape, distance of objects. Some dismissed this as idle optical illusioning, but others who saw these demonstrations – notably including Alfred North Whitehead and Albert Einstein – saw their true importance as revealing surprising things about the mechanism of visual perception.3 His work was carried on by Professor Hadley Cantril of Princeton University, who discussed these phenomena and produced movie demonstrations of them (Cantril, 1950). 2

3

A possible complication of these tests – semantic confusion – readily suggests itself. We noted in Chapter 1 that the word ‘implication’ has a different meaning in formal logic than it has in ordinary language; ‘A implies B’ does not have the usual colloquial meaning that B is logically deducible from A, as the subjects may have supposed. One of Ames’ most impressive demonstrations has been recreated at the Exploratorium in San Francisco, the full-sized ‘Ames room’ into which visitors can look to see these phenomena at first hand.

5 Queer uses for probability theory

133

The brain develops in infancy certain assumptions about the world based on all the sensory information it receives. For example, nearer objects appear larger, have greater parallax, and occlude distant objects in the same line of sight; a straight line appears straight from whatever direction it is viewed, etc. These assumptions are incorporated into the artist’s rules of perspective and in three-dimensional computer graphics programs. We hold tenaciously onto them because they have been successful in correlating many different experiences. We will not relinquish successful hypotheses as long as they work; the only way to make one change these assumptions is to put one in a situation where they don’t work. For example, in that Ames room where perceived size and distance correlate in the wrong way, a child walking across the room doubles in height. The general conclusion from all these experiments is less surprising to our relativist generation than it was to the absolutist generation which made the discoveries. Seeing is not a direct apprehension of reality, as we often like to pretend. Quite the contrary: seeing is inference from incomplete information, no different in nature from the inference that we are studying here. The information that reaches us through our eyes is grossly inadequate to determine what is ‘really there’ before us. The failures of perception revealed by the experiments of Ames and Cantrell are not mechanical failures in the lens, retina, or optic nerve; they are the reactions of the subsequent inference process in the brain when it receives new data that are inconsistent with its prior information. These are just the situations where one is obliged to resurrect some alternative hypothesis; and that is what we ‘see’. We expect that detailed analysis of these cases would show an excellent correspondence with Bayesian inference, in much the same way as in our ESP and diverging opinions examples. Active study of visual perception has continued, and volumes of new knowledge have accumulated, but we still have almost no conception of how this is accomplished at the level of the neurons. Workers note the seeming absence of any organizing principle; we wonder whether the principles of Bayesian inference might serve as a start. We would expect Darwinian natural selection to produce such a result; after all, any reasoning format whose results conflict with Bayesian inference will place a creature at a decided survival disadvantage. Indeed, as we noted long ago (Jaynes, 1957b), in view of Cox’s theorems, to deny that we reason in a Bayesian way is to assert that we reason in a deliberately inconsistent way; we find this very hard to believe. Presumably, a dozen other examples of human and animal perception would be found to obey a Bayesian reasoning format as its ‘high level’ organizing principle, for the same reason. With this in mind, let us examine a famous case history.

5.5 The discovery of Neptune Another potential application for probability theory, which has been discussed vigorously by philosophers for over a century, concerns the reasoning process of a scientist, by which he accepts or rejects his theories in the light of the observed facts. We noted in Chapter 1

134

Part 1 Principles and elementary applications

that this consists largely of the use of two forms of syllogism, if A, then B one strong: B false A false

if A, then B and one weak: B true A more plausible

.

(5.33)

In Chapter 2 we noted that these correspond to the use of Bayes’ theorem in the forms P(A|B X ) = P(A|X )

P(B|AX ) P(B|X )

,

P(A|B X ) = P(A|X )

P(B|AX ) , P(B|X )

(5.34)

respectively, and that these forms do agree qualitatively with the syllogisms. Interest here centers on the question of whether the second form of Bayes’ theorem gives a satisfactory quantitative version of the weak syllogism, as scientists use it in practice. Let us consider a specific example given by P´olya (1954, Vol. II, pp. 130–132). This will give us a more useful example of the resurrection of alternative hypotheses. The planet Uranus was discovered by Wm Herschel in 1781. Within a few decades (i.e. by the time Uranus had traversed about one-third of its orbit), it was clear that it was not following exactly the path prescribed for it by the Newtonian theory (laws of mechanics and gravitation). At this point, a na¨ıve application of the strong syllogism might lead one to conclude that the Newtonian theory was demolished. However, its many other successes had established the Newtonian theory so firmly that in the minds of astronomers the probability for the hypothesis: ‘Newton’s theory is false’ was already down at perhaps −50 db. Therefore, for the French astronomer Urbain Jean Joseph Leverrier (1811–1877) and the English scholar John Couch Adams (1819–1892) at St John’s College, Cambridge, an alternative hypothesis down at perhaps −20 db was resurrected: there must be still another planet beyond Uranus, whose gravitational pull is causing the discrepancy. Working unknown to each other and backwards, Leverrier and Adams computed the mass and orbit of a planet which could produce the observed deviation and predicted where the new planet would be found, with nearly the same results. The Berlin observatory received Leverrier’s prediction on September 23, 1846, and, on the evening of the same day, the astronomer Johann Gottfried Galle (1812–1910) found the new planet (Neptune) within about one degree of the predicted position. For many more details, see Smart (1947) or Grosser (1979). Instinctively, we feel that the plausibility for the Newtonian theory was increased by this little drama. The question is, how much? The attempt to apply probability theory to this problem will give us a good example of the complexity of actual situations faced by scientists, and also of the caution one needs in reading the rather confused literature on these problems. Following P´olya’s notation, let T stand for the Newtonian theory, N for the part of Leverrier’s prediction that was verified. Then probability theory gives the posterior

5 Queer uses for probability theory

135

probability for T as P(T |N X ) = P(T |X )

P(N |T X ) . P(N |X )

(5.35)

Suppose we try to evaluate P(N |X ). This is the prior probability for N , regardless of whether T is true or not. As usual, denote the denial of T by T . Since N = N (T + T ) = N T + N T , we have, by applying the sum and product rules, P(N |X ) = P(N T + N T |X ) = P(N T |X ) + P(N T |X ) = P(N |T X )P(T |X ) + P(N |T X )P(T |X ),

(5.36)

and P(N |T X ) has intruded itself into the problem. But in the problem as stated this quantity is not defined; the statement T ≡ ‘Newton’s theory is false’ has no definite implications until we specify what alternative we have to put in place of Newton’s theory. For example, if there were only a single possible alternative according to which there could be no planets beyond Uranus, then P(N |T X ) = 0, and probability theory would again reduce to deductive reasoning, giving P(T |N X ) = 1, independently of the prior probability P(T |X ). On the other hand, if Einstein’s theory were the only possible alternative, its predictions do not differ appreciably from those of Newton’s theory for this phenomenon, and we would have P(N |T X ) = P(N |T X ), whereupon P(T |N X ) = P(T |X ). Thus, verification of the Leverrier–Adams prediction might elevate the Newtonian theory to certainty, or it might have no effect at all on its plausibility. It depends entirely on this: against which specific alternatives are we testing Newton’s theory? Now, to a scientist who is judging his theories, this conclusion is the most obvious exercise of common sense. We have seen the mathematics of this in some detail in Chapter 4, but all scientists see the same thing intuitively without any mathematics. For example, if you ask a scientist, ‘How well did the Zilch experiment support the Wilson theory?’ you may get an answer like this: ‘Well, if you had asked me last week I would have said that it supports the Wilson theory very handsomely; Zilch’s experimental points lie much closer to Wilson’s predictions than to Watson’s. But, just yesterday, I learned that this fellow Woffson has a new theory based on more plausible assumptions, and his curve goes right through the experimental points. So now I’m afraid I have to say that the Zilch experiment pretty well demolishes the Wilson theory.’ 5.5.1 Digression on alternative hypotheses In view of this, working scientists will note with dismay that statisticians have developed ad hoc criteria for accepting or rejecting theories (chi-squared test, etc.) which make no reference to any alternatives. A practical difficulty of this was pointed out by Jeffreys (1939); there is not the slightest use in rejecting any hypothesis H0 unless we can do it in favor of some definite alternative H1 which better fits the facts. Of course, we are concerned here with hypotheses which are not themselves statements of observable fact. If the hypothesis H0 is merely that x < y, then a direct, error-free

136

Part 1 Principles and elementary applications

measurement of x and y which confirms this inequality constitutes positive proof of the correctness of the hypothesis, independently of any alternatives. We are considering hypotheses which might be called ‘scientific theories’ in that they are suppositions about what is not observable directly; only some of their consequences – logical or causal – can be observed by us. For such hypotheses, Bayes’ theorem tells us this: Unless the observed facts are absolutely impossible on hypothesis H0 , it is meaningless to ask how much those facts tend ‘in themselves’ to confirm or refute H0 . Not only the mathematics, but also our innate common sense (if we think about it for a moment) tell us that we have not asked any definite, well-posed question until we specify the possible alternatives to H0 . Then, as we saw in Chapter 4, probability theory can tell us how our hypothesis fares relative to the alternatives that we have specified; it does not have the creative imagination to invent new hypotheses for us. Of course, as the observed facts approach impossibility on hypothesis H0 , we are led to worry more and more about H0 ; but mere improbability, however great, cannot in itself be the reason for doubting H0 . We almost noted this after Eq. (5.7); now we are laying stress on it because it will be essential for our later general formulation of significance tests. Early attempts to devise such tests foundered on the point we are making. Arbuthnot (1710) noted that in 82 years of demographic data more boys than girls were born in every year. On the ‘null hypothesis’ H0 that the probability for a boy is 1/2, he considered the probability for this result to be 2−82 = 10−24.7 (in our measure, −247 db), so small as to make H0 seem to him virtually impossible, and saw in this evidence for ‘Divine Providence’. He was, apparently, the first person to reject a statistical hypothesis on the grounds that it renders the data improbable. However, we can criticize his reasoning on several grounds. Firstly, the alternative hypothesis H1 ≡ ‘Divine Providence’ does not seem usable in a probability calculation because it is not specific. That is, it does not make any definite predictions known to us, and so we cannot assign any probability for the data P(D|H1 ) conditional on H1 . (For this same reason, the mere logical denial H1 ≡ H 0 is unusable as an alternative.) In fact, it is far from clear why Divine Providence would wish to generate more boys than girls; indeed, if the number of boys and girls were exactly equal every year in a large population, that would seem to us much stronger evidence that some supernatural control mechanism must be at work. Secondly, on the null hypothesis (independent and equal probability for a boy or girl at each birth) the probability P(D|H0 ) of finding the observed sequence would have been just as small whatever the data, so by Arbuthnot’s reasoning the hypothesis would have been rejected whatever the data! Without having the probability P(D|H1 ) of the data on the alternative hypothesis and the prior probabilities of the hypotheses, there is just no well-posed problem and no rational basis for passing judgment. Finally, having observed more boys than girls for ten consecutive years, rational inference might have led Arbuthnot to anticipate it for the 11th year. Thus his hypothesis H0 was not only the numerical value p = 1/2; there was also an implicit assumption of logical independence for different years, of which he was probably unaware. On an hypothesis that

5 Queer uses for probability theory

137

allows for positive correlations, for example Hex , which assigns an exchangeable sampling distribution, the probability P(D|Hex ) for the aggregated data could be very much greater than 2−82 . Thus, Arbuthnot took a small step in the right direction, but to get a usable significance test required a conceptual understanding of probability theory on a considerably higher level, as achieved by Laplace some 100 years later. Another example occurred when Daniel Bernoulli won a French Academy prize of 1734 with an essay on the orbits of planets, in which he represented the orientation of each orbit by its polar point on the unit sphere and found them so close together as to make it very unlikely that the present distribution could result by chance. Although he too failed to state a specific alternative, we are inclined to accept his conclusion today because there seems to be a very clearly implied null hypothesis H0 of ‘chance’ according to which the points should appear spread all over the sphere with no tendency to cluster together, and H1 of ‘attraction’, which would make them tend to coincide; the evidence rather clearly supported H1 over H0 . Laplace (1812) did a similar analysis on comets, found their polar points much more scattered than those of the planets, and concluded that comets are not ‘regular members’ of the solar system like the planets. Here we finally had two fairly well-defined hypotheses being compared by a correct application of probability theory.4 Such tests need not be quantitative. Even when the application is only qualitative, probability theory is still useful to us in a normative sense; it is the means by which we can detect inconsistencies in our own qualitative reasoning. It tells us immediately what has not been intuitively obvious to all workers: that alternatives are needed before we have any rational criterion for testing hypotheses. This means that if any significance test is to be acceptable to a scientist, we shall need to examine its rationale to see whether it has, like Daniel Bernoulli’s test, some implied if unstated alternative hypotheses. Only when such hypotheses are identified are we in a position to say what the test accomplishes; i.e. what it is testing. But not to keep the reader in suspense: a statisticians’ formal significance test can always be interpreted as a test of a specified hypothesis H0 against a specified class of alternatives, and thus it is only a mathematical generalization of our treatment of multiple hypothesis tests in Chapter 4, Eqs. (4.31)–(4.49). However, the orthodox literature, which dealt with composite hypotheses by applying arbitrary ad hockeries instead of probability theory, never perceived this.

5.5.2 Back to Newton Now we want to formulate a quantitative result about Newton’s theory. In P´olya’s discussion of the feat of Leverrier and Adams, once again no specific alternative to Newton’s theory is stated; but from the numerical values used (P´olya, 1954, Vol. II, p. 131) we can infer that he had in mind a single possible alternative H1 according to which it was known 4

It is one of the tragedies of history that Cournot (1843), failing to comprehend Laplace’s rationale, attacked it and reinstated the errors of Arbuthnot, thereby dealing scientific inference a setback from which it required a lifetime to recover.

138

Part 1 Principles and elementary applications

that one more planet existed beyond Uranus, but all directions on the celestial sphere were considered equally likely. Then, since a cone of angle 1 degree fills in the sky a solid angle of about π/(57.3)2 = 10−3 steradian, P(N |H1 X ) 10−3 /4π = 1/13 000 is the probability that Neptune would have been within 1 degree of the predicted position. Unfortunately, in the calculation no distinction was made between P(N |X ) and P(N |T X ); that is, instead of the calculation (5.35) indicated by probability theory, the likelihood ratio actually calculated by P´olya was, in our notation, P(N |T X ) P(N |T X )

=

P(N |T X ) . P(N |H1 X )

(5.37)

Therefore, according to the analysis in Chapter 4, what P´olya obtained was not the ratio of posterior to prior probabilities, but the ratio of posterior to prior odds: P(N |T X ) O(N |T X ) = = 13 000. O(N |X ) P(N |T X )

(5.38)

The conclusions are much more satisfactory when we notice this. Whatever prior probability P(T |X ) we assign to Newton’s theory, if H1 is the only alternative considered, then verification of the prediction increased the evidence for Newton’s theory by 10 log10 (13 000) = 41 db. Actually, if there were a new planet it would be reasonable, in view of the aforementioned investigations of Daniel Bernoulli and Laplace, to adopt a different alternative hypothesis H2 , according to which its orbit would lie in the plane of the ecliptic, as P´olya again notes by implication rather than explicit statement. If, on hypothesis H2 , all values of longitude are considered equally likely, we might reduce this to about 10 log10 (180) = 23 db. In view of the great uncertainty as to just what the alternative is (i.e. in view of the fact that the problem has not been defined unambiguously), any value between these extremes seems more or less reasonable. There was a difficulty which bothered P´olya: if the probability of Newton’s theory were increased by a factor of 13 000, then the prior probability was necessarily lower than (1/13 000); but this contradicts common sense, because Newton’s theory was already very well established before Leverrier was born. P´olya interprets this in his book as revealing an inconsistency in Bayes’ theorem, and the danger of trying to apply it numerically. Recognition that we are, in the above numbers, dealing with odds rather than probabilities, removes this objection and makes Bayes’ theorem appear quite satisfactory in describing the inferences of a scientist. This is a good example of the way in which objections to the Bayes–Laplace methods which you find in the literature disappear when you look at the problem more carefully. By an unfortunate slip in the calculation, P´olya was led to a misunderstanding of how Bayes’ theorem operates. But I am glad to be able to close the discussion of this incident with a happier personal reminiscence. In 1956, two years after the appearance of P´olya’s work, I gave a series of lectures on these matters at Stanford University, and George P´olya attended them, sitting in the first

5 Queer uses for probability theory

139

row and paying the most strict attention to everything that was said. By then he understood this point very well – indeed, whenever a question was raised from the audience, P´olya would turn around and give the correct answer, before I could. It was very pleasant to have that kind of support, and I miss his presence today (George P´olya died, at the age of 97, in September 1985). But the example also shows clearly that, in practice, the situation faced by the scientist is so complicated that there is little hope of applying Bayes’ theorem to give quantitative results about the relative status of theories. Also there is no need to do this, because the real difficulty of the scientist is not in the reasoning process itself; his common sense is quite adequate for that. The real difficulty is in learning how to formulate new alternatives which better fit the facts. Usually, when one succeeds in doing this, the evidence for the new theory soon becomes so overwhelming that nobody needs probability theory to tell him what conclusions to draw.

Exercise 5.4. Our story has a curious sequel. In turn, it was noticed that Neptune was not following exactly its proper course, and so one naturally assumed that there is still another planet causing this. Percival Lowell, by a similar calculation, predicted its orbit, and Clyde Tombaugh proceeded to find the new planet (Pluto), although not so close to the predicted position. But now the story changes: modern data on the motion of Pluto’s moon indicated that the mass of Pluto is too small to have caused the perturbation of Neptune which motivated Lowell’s calculation. Thus, the discrepancies in the motions of Neptune and Pluto were unaccounted for. (We are indebted to Dr Brad Schaefer for this information.) Try to extend our probability analysis to take this new circumstance into account; at this point, where did Newton’s theory stand? For more background information, see Hoyt (1980) or Whyte (1980). More recently, it appears that the mass of Pluto had been estimated wrongly and the discrepancies were after all not real; then it seems that the status of Newton’s theory should revert to its former one. Discuss this sequence of pieces of information in terms of probability theory. Do we update by Bayes’ theorem as each new fact comes in? Or do we just return to the beginning when we learn that a previous datum was false?

At present, we have no formal theory at all on the process of ‘optimal hypothesis formulation’, and we are dependent entirely on the creative imagination of individual persons such as Newton, Mendel, Einstein, Wegener, and Crick (1988). So, we would say that in principle the application of Bayes’ theorem in the above way is perfectly legitimate; but in practice it is of very little use to a scientist. However, we should not presume to give quick, glib answers to deep questions. The question of exactly how scientists do, in practice, pass judgment on their theories, remains complex and not well analyzed. Further comments on the validity of Newton’s theory are offered in our closing Comments, Section 5.9.

140

Part 1 Principles and elementary applications

5.6 Horse racing and weather forecasting The preceding examples noted two different features common in problems of inference: (a) as in the ESP and psychological cases, the information we receive is often not a direct proposition like S in (5.21), but is an indirect claim that S is true, from some ‘noisy’ source that is itself not wholly reliable; (b) as in the example of Neptune, there is a long tradition of writers who have misapplied Bayes’ theorem and concluded that Bayes’ theorem is at fault. Both features are present simultaneously in a work of the Princeton philosopher Richard C. Jeffrey (1983), hereafter denoted by RCJ to avoid confusion with the Cambridge scholar Sir Harold Jeffreys. RCJ considers the following problem. With only prior information I , we assign a probability P(A|I ) for A. Then we get new information B, and it changes as usual via Bayes’ theorem to P(A|B I ) = P(A|I )P(B|AI )/P(B|I ).

(5.39)

But then he decides that Bayes’ theorem is not sufficiently general, because we often receive new information that is not certain; perhaps the probability for B is not unity but, say, q. To this we would reply: ‘If you do not accept B as true, then why are you using it in Bayes’ theorem this way?’ But RCJ follows that long tradition and concludes, not that it is a misapplication of Bayes’ theorem to use uncertain information as in (5.39), but that Bayes’ theorem is itself faulty, and it needs to be generalized to take the uncertainty of new information into account. His proposed generalization (denoting the denial of B by B) is that the updated probability for A should be taken as a weighted average: P(A) J = q P(A|B I ) + (1 − q)P(A|B I ).

(5.40)

But this is an ad hockery that does not follow from the rules of probability theory unless we take q to be the prior probability P(B|I ), just the case that RCJ excludes (for then P(A) J = P(A|I ), and there is no updating). Since (5.40) conflicts with the rules of probability theory, we know that it necessarily violates one of the desiderata that we discussed in Chapters 1 and 2. The source of the trouble is easy to find, because those desiderata tell us where to look. The proposed ‘generalization’ (5.40) cannot hold generally because we could learn many different things, all of which indicate the same probability q for B; but which have different implications for A. Thus (5.40) violates desideratum (1.39b); it cannot take into account all of the new information, only the part of it that involves (i.e. is relevant to) B. The analysis of Chapter 2 tells us that, if we are to salvage things and recover a well-posed problem with a defensible solution, we must not depart in any way from Bayes’ theorem. Instead, we need to recognize the same thing that we stressed in the ESP example; if B is not known with certainty to be true, then B could not have been the new information; the actual information received must have been some proposition C such that P(B|C I ) = q. But then, of course, we should be considering Bayes’ theorem conditional on C, rather than B: P(A|C I ) = P(A|I )P(C|AI )/P(C|I ).

(5.41)

5 Queer uses for probability theory

141

If we apply it properly, Bayes’ theorem automatically takes the uncertainty of new information into account. This result can be written, using the product and sum rules of probability theory, as P(A|C I ) = P(AB|C I ) + P(AB|C I ) = P(A|BC I )P(B|C I ) + P(A|BC I )P(B|C I ), (5.42) and if we define q ≡ P(B|C I ) to be the updated probability for B, this can be written in the form P(A|C I ) = q P(A|BC I ) + (1 − q)P(A|BC I ),

(5.43)

which resembles (5.40), but is not in general equal to it, unless we add the restriction that the probabilities P(A|BC I ) and P(A|BC I ) are to be independent of C. Intuitively, this would mean that the logic flows thus: (C → B → A)

(5.44)

(C → A).

(5.45)

rather than

That is, C is relevant to A only through its intermediate relevance to B (C is relevant to B and B is relevant to A). RCJ shows by example that this logic flow may be present in a real problem, but fails to note that his proposed solution (5.40) is then the same as the Bayesian result. Without that logic flow, (5.40) will be unacceptable in general because it does not take into account all of the new information. The information which is lost is indicated by the lack of an arrow going directly (C → A) in the logic flow diagram (5.45); information in C which is directly relevant to A, whether or not B is true. If we think of the logic flow as something like the flow of light, we might visualize it thus. At night we receive sunlight only through its intermediate reflection from the moon; this corresponds to the RCJ solution. But in the daytime we receive light directly from the sun, whether or not the moon is there; this is what the RCJ solution has missed. (In fact, when we study the maximum entropy formalism in statistical mechanics and the phenomenon of ‘generalized scattering’, we shall find that this is more than a loose analogy; the process of conditional information flow is in almost exact mathematical correspondence with the Huygens principle of optics.)

Exercise 5.5. We might expect intuitively that when q → 1 this difference would disappear; i.e. P(A|B I ) → P(A|C I ). Determine whether this is or is not generally true. If it is, indicate how small 1 − q must be in order to make the difference practically negligible. If it is not, illustrate by a verbal scenario the circumstances which can prevent this agreement.

142

Part 1 Principles and elementary applications

We can illustrate this in a more down-to-earth way by one of RCJ’s own scenarios: A ≡ my horse will win the race tomorrow, B ≡ the track will be muddy, I ≡ whatever I know about my horse and jockey in particular, and about horses, jockeys, races, and life in general, and the probability P(A|I ) is updated as a result of receiving a weather forecast. Then some proposition C such as: C ≡ the TV weather forecaster showed us today’s weather map, quoted some of the current meteorological data, and then by means unexplained assigned probability q for rain tomorrow is clearly present, but it is not recognized and stated by RCJ. Indeed, to do so would introduce much new detail, far beyond the gambit of propositions (A, B) of interest to horse racers. If we recognize proposition C explicitly, then we must recall everything we know about the process of weather forecasting, what were the particular meteorological data leading to that forecast, how reliable weather forecasts are in the presence of such data, how the officially announced probability q is related to what the forecaster really believes (i.e. what we think the forecaster perceives his own interest to be), etc. If the above-defined C is the new information, then we must consider also, in the light of all our prior information, how C might affect the prospects for the race A through other circumstances than the muddiness B of the track; perhaps the jockey is blinded by bright sunlight, perhaps the rival horse runs poorly on cloudy days, whether or not the track is wet. These would be logical relations of the form (C → A) that (5.40) cannot take into account. Therefore the full solution must be vastly more complicated than (5.40); but this is, of course, as it should be. Bayes’ theorem, as always, is only telling us what common sense does; in general the updated probability for A must depend on far more than just the updated probability q for B. 5.6.1 Discussion This example illustrates what we have noted before in Chapter 1; that familiar problems of everyday life may be more complicated than scientific problems, where we are often reasoning about carefully controlled situations. The most familiar problems may be so complicated – just because the result depends on so many unknown and uncontrolled factors – that a full Bayesian analysis, although correct in principle, is out of the question in practice. The cost of the computation is far more than we could hope to win on the horse. Then we are necessarily in the realm of approximation techniques; but, since we cannot apply Bayes’ theorem exactly, need we still consider it at all? Yes, because Bayes’ theorem remains the normative principle telling us what we should aim for. Without it, we have nothing to guide our choices and no criterion for judging their success. It also illustrates what we shall find repeatedly in later chapters: that generations of workers in this field have not comprehended the fact that Bayes’ theorem is a valid theorem,

5 Queer uses for probability theory

143

required by elementary desiderata of rationality and consistency, and have made unbelievably persistent attempts to replace it by all kinds of intuitive ad hockeries. Of course, we expect that any sincere intuitive effort will capture bits of the truth; yet all of these dozens of attempts have proved on analysis to be satisfactory only in those cases where they agree with Bayes’ theorem after all. We are at a loss, however, to understand what motivates these anti-Bayesian efforts, because we can see nothing unsatisfactory about Bayes’ theorem, either in its theoretical foundations, its intuitive rationale, or its pragmatic results. The writer has devoted some 40 years to the analysis of thousands of separate problems by Bayes’ theorem, and is still being impressed by the beautiful and important results it gives us, often in a few lines, and far beyond what those ad hockeries can produce. We have yet to find a case where it yields an unsatisfactory result (although the result is sometimes surprising at first glance, and it requires some meditation to educate our intuition and see that it is correct after all). Needless to say, the cases where we are at first surprised are just the ones where Bayes’ theorem is most valuable to us; because those are the cases where intuitive ad hockeries would never have found the result. Comparing Bayesian analysis with the ad hoc methods which saturate the literature, whenever there is any disagreement in the final conclusions, we have found it easy to exhibit the defect of the ad hockery, just as the analysis of Chapter 2 led us to expect, and as we saw in the above example. In the past, many man-years of effort were wasted in futile attempts to square the circle; had Lindemann’s theorem (that π is transcendental) been known and its implications recognized, all of this might have been averted. Likewise, had Cox’s theorems been known, and their implications recognized, 100 years ago, many wasted careers might have been turned instead to constructive activity. This is our answer to those who have suggested that Cox’s theorems are unimportant, because they only confirm what James Bernoulli and Laplace had conjectured long before. Today, we have five decades of experience confirming what Cox’s theorems tell us. It is clear that, not only is the quantitative use of the rules of probability theory as extended logic the only sound way to conduct inference; it is the failure to follow those rules strictly that has for many years been leading to unnecessary errors, paradoxes, and controversies. 5.7 Paradoxes of intuition A famous example of this situation, known as Hempel’s paradox, starts with the premise: ‘A case of an hypothesis supports the hypothesis.’ Then it observes: ‘Now the hypothesis that all crows are black is logically equivalent to the statement that all non-black things are non-crows, and this is supported by the observation of a white shoe.’ An incredible amount has been written about this seemingly innocent argument, which leads to an intolerable conclusion. The error in the argument is apparent at once when one examines the equations of probability theory applied to it: the premise, which was not derived from any logical analysis,

144

Part 1 Principles and elementary applications

is not generally true, and he prevents himself from discovering that fact by trying to judge support of an hypothesis without considering any alternatives. Good (1967), in a note entitled ‘The white shoe is a red herring’, demonstrated the error in the premise by a simple counterexample. In World 1 there are one million birds, of which 100 are crows, all black. In World 2 there are two million birds, of which 200 000 are black crows and 1 800 000 are white crows. We observe one bird, which proves to be a black crow. Which world are we in? Evidently, observation of a black crow gives evidence of

200 000/2 000 000 = 30 db, (5.46) 10 log10 100/1 000 000 or an odds ratio of 1000:1, against the hypothesis that all crows are black; that is, for World 2 against World 1. Whether an ‘instance of an hypothesis’ does or does not support the hypothesis depends on the alternatives being considered and on the prior information. We learned this in finding the error in the reasoning leading to (5.20). But, incredibly, Hempel (1967) proceeded to reject Good’s clear and compelling argument on the grounds that it was unfair to introduce that background information about Worlds 1 and 2. In the literature there are perhaps 100 ‘paradoxes’ and controversies which are like this, in that they arise from faulty intuition rather than faulty mathematics. Someone asserts a general principle that seems to him intuitively right. Then, when probability analysis reveals the error, instead of taking this opportunity to educate his intuition, he reacts by rejecting the probability analysis. We shall see several more examples of this; in particular, the marginalization paradox in Chapter 15. As a colleague of the writer once remarked, ‘Philosophers are free to do whatever they please, because they don’t have to do anything right.’ But a responsible scientist does not have that freedom; he will not assert the truth of a general principle, and urge others to adopt it, merely on the strength of his own intuition. Some outstanding examples of this error, which are not mere philosophers’ toys like the RCJ tampering with Bayes’ theorem and the Hempel paradox, but have been actively harmful to Science and Society, are discussed in Chapters 15 and 17.

5.8 Bayesian jurisprudence It is interesting to apply probability theory in various situations in which we can’t always reduce it to numbers very well, but still it shows automatically what kind of information would be relevant to help us do plausible reasoning. Suppose someone in New York City has committed a murder, and you don’t know at first who it is, but you know that there are 10 million people in New York City. On the basis of no knowledge but this, e(guilty|X ) = −70 db is the plausibility that any particular person is the guilty one. How much positive evidence for guilt is necessary before we decide that some man should be put away? Perhaps +40 db, although your reaction may be that this is not safe enough,

5 Queer uses for probability theory

145

and the number ought to be higher. If we raise this number we give increased protection to the innocent, but at the cost of making it more difficult to convict the guilty; and at some point the interests of society as a whole cannot be ignored. For example, if 1000 guilty men are set free, we know from only too much experience that 200 or 300 of them will proceed immediately to inflict still more crimes upon society, and their escaping justice will encourage 100 more to take up crime. So it is clear that the damage to society as a whole caused by allowing 1000 guilty men to go free, is far greater than that caused by falsely convicting one innocent man. If you have an emotional reaction against this statement, I ask you to think: if you were a judge, would you rather face one man whom you had convicted falsely; or 100 victims of crimes that you could have prevented? Setting the threshold at +40 db will mean, crudely, that on the average not more than one conviction in 10 000 will be in error; a judge who required juries to follow this rule would probably not make one false conviction in a working lifetime on the bench. In any event, if we took +40 db starting out from −70 db, this means that in order to ensure a conviction you would have to produce about 110 db of evidence for the guilt of this particular person. Suppose now we learn that this person had a motive. What does that do to the plausibility for his guilt? Probability theory says P(motive|guilty) e(guilty|motive) = e(guilty|X ) + 10 log10 P(motive|not guilty) (5.47) −70 − 10 log10 P(motive|not guilty), since P(motive|guilty) 1, i.e. we consider it quite unlikely that the crime had no motive at all. Thus, the significance of learning that the person had a motive depends almost entirely on the probability P(motive|not guilty) that an innocent person would also have a motive. This evidently agrees with our common sense, if we ponder it for a moment. If the deceased were kind and loved by all, hardly anyone would have a motive to do him in. Learning that, nevertheless, our suspect did have a motive, would then be very significant information. If the victim had been an unsavory character, who took great delight in all sorts of foul deeds, then a great many people would have a motive, and learning that our suspect was one of them is not so significant. The point of this is that we don’t know what to make of the information that our suspect had a motive, unless we also know something about the character of the deceased. But how many members of juries would realize that, unless it was pointed out to them? Suppose that a very enlightened judge, with powers not given to judges under present law, had perceived this fact and, when testimony about the motive was introduced, he directed his assistants to determine for the jury the number of people in New York City who had a motive. If this number is Nm then P(motive|not guilty) =

Nm − 1 10−7 (Nm − 1), (5.48) (number of people in New York) − 1

146

Part 1 Principles and elementary applications

and (5.47) reduces, for all practical purposes, to e(guilty|motive) −10 log10 (Nm − 1).

(5.49)

You see that the population of New York has cancelled out of the equation; as soon as we know the number of people who had a motive, then it doesn’t matter any more how large the city was. Note that (5.49) continues to say the right thing even when Nm is only 1 or 2. You can go on this way for a long time, and we think you will find it both enlightening and entertaining to do so. For example, we now learn that the suspect was seen near the scene of the crime shortly before. From Bayes’ theorem, the significance of this depends almost entirely on how many innocent persons were also in the vicinity. If you have ever been told not to trust Bayes’ theorem, you should follow a few examples like this a good deal further, and see how infallibly it tells you what information would be relevant, what irrelevant, in plausible reasoning.5 In recent years there has grown up a considerable literature on Bayesian jurisprudence; for a review with many references, see Vignaux and Robertson (1996). Even in situations where we would be quite unable to say that numerical values should be used, Bayes’ theorem still reproduces qualitatively just what your common sense (after perhaps some meditation) tells you. This is the fact that George P´olya demonstrated in such exhaustive detail that the present writer was convinced that the connection must be more than qualitative.

5.9 Comments There has been much more discussion of the status of Newton’s theory than we indicated above. For example, it has been suggested by Charles Misner that we cannot apply a theory with full confidence until we know its limits of validity – where it fails. Thus, relativity theory, in showing us the limits of validity of Newtonian mechanics, also confirmed its accuracy within those limits; so it should increase our confidence in Newtonian theory when applied within its proper domain (velocities small compared with that of light). Likewise, the first law of thermodynamics, in showing us the limits of validity of the caloric theory, also confirmed the accuracy of the caloric theory within its proper domain (processes where heat flows but no work is done). At first glance this seems an attractive idea, and perhaps this is the way scientists really should think. 5

Note that in these cases we are trying to decide, from scraps of incomplete information, on the truth of an Aristotelian proposition; whether the defendant did or did not commit some well-defined action. This is the situation – an issue of fact – for which probability theory as logic is designed. But there are other legal situations quite different; for example, in a medical malpractice suit it may be that all parties are agreed on the facts as to what the defendant actually did; the issue is whether he did or did not exercise reasonable judgment. Since there is no official, precise definition of ‘reasonable judgment’, the issue is not the truth of an Aristotelian proposition (however, if it were established that he wilfully violated one of our Chapter 1 desiderata of rationality, we think that most juries would convict him). It has been claimed that probability theory is basically inapplicable to such situations, and we are concerned with the partial truth of a non-Aristotelian proposition. We suggest, however, that in such cases we are not concerned with an issue of truth at all; rather, what is wanted is a value judgment. We shall return to this topic later (Chapters 13, 18).

5 Queer uses for probability theory

147

Nevertheless, Misner’s principle contrasts strikingly with the way scientists actually do think. We know of no case where anyone has avowed that his confidence in a theory was increased by its being, as we say, ‘overthrown’. Furthermore, we apply the principle of conservation of momentum with full confidence, not because we know its limits of validity, but for just the opposite reason; we do not know of any such limits. Yet scientists believe that the principle of momentum conservation has real content; it is not a mere tautology. Not knowing the answer to this riddle, we pursue it only one step further, with the observation that if we are trying to judge the validity of Newtonian mechanics, we cannot be sure that relativity theory showed us all its limitations. It is conceivable, for example, that it may fail not only in the limit of high velocities, but also in that of high accelerations. Indeed, there are theoretical reasons for expecting this; for Newton’s F = ma and Einstein’s E = mc2 can be combined into a perhaps more fundamental statement: F = (E/c2 )a.

(5.50)

Why should the force required to accelerate a bundle of energy E depend on the velocity of light? We see a plausible reason at once, if we adopt the – almost surely true – hypothesis that our allegedly ‘elementary’ particles cannot occupy mere mathematical points in space, but are extended structures of some kind. Then the velocity of light determines how rapidly different parts of the structure can ‘communicate’ with each other. The more quickly all parts can learn that a force is being applied, the more quickly they can all respond to it. We leave it as an exercise for the reader to show that one can actually derive Eq. (5.50) from this premise. (Hint: the force is proportional to the deformation that the particle must suffer before all parts of it start to move.) But this embryonic theory makes further predictions immediately. We would expect that, when a force is applied suddenly, a short transient response time would be required for the acceleration to reach its Newtonian value. If so, then Newton’s F = ma is not an exact relation, only a final steady state condition, approached after the time required for light to cross the structure. It is conceivable that such a prediction could be tested experimentally. Thus, the issue of our confidence in Newtonian theory is vastly more subtle and complex than merely citing its past predictive successes and its relationship to relativity theory; it depends also on our whole theoretical outlook. It appears to us that actual scientific practice is guided by instincts that have not yet been fully recognized, much less analyzed and justified. We must take into account not only the logic of science, but also the sociology of science (perhaps also its soteriology). But this is so complicated that we are not even sure whether the extremely skeptical conservatism with which new ideas are invariably received is, in the long run, a beneficial stabilizing influence, or a harmful obstacle to progress.

148

Part 1 Principles and elementary applications

5.9.1 What is queer? In this chapter we have examined some applications of probability theory that seem ‘queer’ to us today, in the sense of being ‘off the beaten track’. Any completely new application must presumably pass through such an exploratory phase of queerness. But in many cases, particularly the Bayesian jurisprudence and psychological tests with a more serious purpose than ESP, we think that queer applications of today may become respectable and useful applications of tomorrow. Further thought and experience will make us more aware of the proper formulation of a problem – better connected to reality – and then future generations will come to regard Bayesian analysis as indispensable for discussing it. Now we return to the many applications that are already advanced beyond the stage of queerness, into that of respectability and usefulness.

6 Elementary parameter estimation

A distinction without a difference has been introduced by certain writers who distinguish ‘Point estimation’, meaning some process of arriving at an estimate without regard to its precision, from ‘Interval estimation’ in which the precision of the estimate is to some extent taken into account. R. A. Fisher (1956) Probability theory as logic agrees with Fisher in spirit; that is, it gives us automatically both point and interval estimates from a single calculation. The distinction commonly made between hypothesis testing and parameter estimation is considerably greater than that which concerned Fisher; yet it too is, from our point of view, not a real difference. When we have only a small number of discrete hypotheses {H1 , . . . , Hn } to consider, we usually want to pick out a specific one of them as the most likely in that set, in the light of the prior information and data. The cases n = 2 and n = 3 were examined in some detail in Chapter 4, and larger n is in principle a straightforward and rather obvious generalization. When the hypotheses become very numerous, however, a different approach seems called for. A set of discrete hypotheses can always be classified by assigning one or more numerical indices which identify them, as in Ht (1 ≤ t ≤ n), and if the hypotheses are very numerous one can hardly avoid doing this. Then, deciding between the hypotheses Ht and estimating the index t are practically the same thing, and it is a small step to regard the index, rather than the hypotheses, as the quantity of interest; then we are doing parameter estimation. We consider first the case where the index remains discrete.

6.1 Inversion of the urn distributions In Chapter 3 we studied a variety of sampling distributions that arise in drawing from an urn. There the number N of balls in the urn, and the number R of red balls and N − R white ones, were considered known in the statement of the problem, and we were to make ‘pre-data’ inferences about what kind of mix of r red, n − r white we were likely to get on drawing n of them. Now we want to invert this problem, in the way envisaged by Bayes and Laplace, to the ‘post-data’ problem: the data D ≡ (n, r ) are known, but the contents 149

150

Part 1 Principles and elementary applications

(N , R) of the urn are not. From the data and our prior information about what is in the urn, what can we infer about its true contents? It is probably safe to say that every worker in probability theory is surprised by the results – almost trivial mathematically, yet deep and unexpected conceptually – that one finds in this inversion. In the following we note some of the surprises already well known in the literature, and add to them. We found in Eq. (3.22) the sampling distribution for this problem; in our present notation this is the hypergeometric distribution

−1 R N−R N , (6.1) p(D|N R I ) = h(r |N R, n) = r n −r n where I now denotes the prior information, the general statement of the problem as given above.

6.2 Both N and R unknown In general, neither N nor R is known initially, and the robot is to estimate both of them. If we succeed in drawing n balls from the urn, then of course we know deductively that N ≥ n. It seems to us intuitively that the data could tell us nothing more about N ; how could the number r of red balls drawn, or the order of drawing, be relevant to N ? But this intuition is using a hidden assumption that we can hardly be aware of until we see the robot’s answer to the question. The joint posterior probability distribution for N and R is p(N R|D I ) = p(N |I ) p(R|N I )

p(D|N R I ) , p(D|I )

(6.2)

in which we have factored the joint prior probability by the product rule: p(N R|I ) = p(N |I ) p(R|N I ), and the normalizing denominator is a double sum, p(D|I ) =

N ∞

p(N |I ) p(R|N I ) p(D|N R I ),

(6.3)

N =0 R=0

in which, of course, the factor p(D|N R I ) is zero when N < n, or R < r , or N − R < n − r . Then the marginal posterior probability for N alone is N p(R|N I ) p(D|N R I ) . (6.4) p(N R|D I ) = p(N |I ) R p(N |D I ) = p(D|I ) R=0 We could equally well apply Bayes’ theorem directly: p(N |D I ) = p(N |I )

p(D|N I ) , p(D|I )

(6.5)

and of course (6.4) and (6.5) must agree, by the product and sum rules. These relations must hold whatever prior information I we may have about N , R that is to be expressed by p(N R|I ). In principle, this could be arbitrarily complicated, and

6 Elementary parameter estimation

151

conversion of verbally stated prior information into p(N R|I ) is an open-ended problem; you can always analyze your prior information more deeply. But usually our prior information is rather simple, and these problems are not difficult mathematically. Intuition might lead us to expect further that, whatever prior p(N |I ) we had assigned, the data can only truncate the impossible values, leaving the relative probabilities of the possible values unchanged: Ap(N |I ), if N ≥ n, (6.6) p(N |D I ) = 0, if 0 ≤ N < n, where A is a normalization constant. Indeed, the rules of probability theory tell us that this must be true if the data tell us only that N ≥ n and nothing else about N . For example, if Z ≡ N ≥ n, then

p(Z |N I ) =

(6.7)

1

if n ≤ N

0

if n > N .

(6.8)

Bayes’ theorem reads: p(Z |N I ) = p(N |Z I ) = p(N |I ) p(Z |I )

Ap(N |I )

if N ≥ n

0

if N < n.

(6.9)

If the data tell us only that Z is true, then we have (6.6) and the above normalization constant is A = 1/ p(Z |I ). Bayes’ theorem confirms that if we learn only that N ≥ n, the relative probabilities of the possible values of N are not changed by this information; only the normalization must be readjusted to compensate for the values N < n that now have zero probability. Laplace considered this result intuitively obvious, and took it as a basic principle of his theory. However, the robot tells us in (6.5) that this will not be the case unless p(D|N I ) is independent of N for N ≥ n. And, on second thought, we see that (6.6) need not be true if we have some kind of prior information linking N and R. For example, it is conceivable that one might know in advance that R < 0.06N . Then, necessarily, having observed the data (n, r ) = (10, 6), we would know not only that N ≥ 10, but that N > 100. Any prior information that provides a logical link between N and R makes the datum r relevant to estimating N after all. But usually we lack any such prior information, and so estimation of N is uninteresting, reducing to the same result (6.6). From (6.5), the general condition that the data can tell us nothing about N , except to truncate values less than n, is a nontrivial condition on the prior probability p(R|N I ): N f (n, r ) if N ≥ n p(D|N R I ) p(R|N I ) = (6.10) p(D|N I ) = 0 if N < n, R=0

152

Part 1 Principles and elementary applications

where f (n, r ) may depend on the data, but is independent of N . Since we are using the standard hypergeometric urn sampling distribution (6.1), this is explicitly

N R N−R N p(R|N I ) = f (n, r ) , r n −r n R=0

(N ≥ n).

(6.11)

This is that hidden assumption that our intuition could hardly have told us about. It is a kind of discrete integral equation1 which the prior p(R|N I ) must satisfy as the necessary and sufficient condition for the data to be uninformative about N . The sum on the lefthand side is necessarily always zero when N < n, for the first binomial coefficient is zero when R < r , and the second is zero when R ≥ r and N < n. Therefore, the mathematical constraint on p(R|N I ) is only, rather sensibly, that f (n, r ) in (6.11) must be independent of N when N ≥ n. In fact, most ‘reasonable’ priors do satisfy this condition, and as a result estimation of N is relatively uninteresting. Then, factoring the joint posterior distribution (6.2) in the form p(N R|D I ) = p(N |D I ) p(R|N D I ),

(6.12)

our main concern is with the factor p(R|N D I ), drawing inferences about R or about the ratio R/N with N supposed known. The posterior probability distribution for R is then, by Bayes’ theorem, p(R|D N I ) = p(R|N I )

p(D|N R I ) . p(D|N I )

(6.13)

Different choices of the prior probability p(R|N I ) will yield many quite different results, and we now examine a few of them.

6.3 Uniform prior Consider the state of prior knowledge denoted by I0 , in which we are, seemingly, as ignorant as we could be about R while knowing N : the uniform distribution 1 if 0 ≤ R ≤ N (6.14) p(R|N I0 ) = N + 1 0 if R > N . Then a few terms cancel out, and (6.13) reduces to

R N−R , p(R|D N I0 ) = S −1 r n −r

1

(6.15)

This peculiar name anticipates what we shall find later, in connection with marginalization theory; very general conditions of ‘uninformativeness’ are expressed by similar integral equations that the prior for one parameter must satisfy in order to make the data uninformative about another parameter.

6 Elementary parameter estimation

153

where S is a normalization constant. For several purposes, we need the general summation formula

N R N−R N +1 S≡ = , (6.16) r n −r n+1 R=0 whereupon the correctly normalized posterior distribution for R is

N + 1 −1 R N − R . p(R|D N I0 ) = n+1 r n −r

(6.17)

This is not a hypergeometric distribution like (6.1) because the variable is now R instead of r . The prior (6.14) yields, using (6.16), N R=0

R N−R 1 N +1 1 N 1 = = , N +1 r n −r N +1 n+1 n+1 n

(6.18)

so the integral equation (6.11) is satisfied; with this prior the data can tell us nothing about N , beyond the fact that N ≥ n. Let us check (6.17) to see whether it satisfies some obvious common sense requirements. We see that it vanishes when R < r , or R > N − n + r , in agreement with what the data tell us by deductive reasoning. If we have sampled all the balls, n = N , then (6.17) reduces to Kronecker’s delta, δ(R, r ), again agreeing with deductive reasoning. This is another illustration of the fact that probability theory as extended logic automatically includes deductive logic as a special case. If we obtain no data at all, n = r = 0, then (6.17) reduces, as it should, to the prior distribution: p(R|D N I0 ) = p(R|N I0 ) = 1/(N + 1). If we draw only one ball which proves to be red, n = r = 1, then (6.17) reduces to p(R|D N I0 ) =

2R . N (N + 1)

(6.19)

The vanishing when R = 0 again agrees with deductive logic. From (6.1) the sampling probability p(r = 1|n = 1, N R I0 ) = R/N that our one ball would be red is our original Bernoulli urn result, proportional to R; and with a uniform prior the posterior probability for R must also be proportional to R. The numerical coefficient in (6.19) gives us an inadvertent derivation of the elementary sum rule, N R=0

R=

N (N + 1) . 2

(6.20)

These results are only a few of thousands now known, indicating that probability theory as extended logic is an exact mathematical system. That is, results derived from correct application of our rules without approximation have the property of exact results in any

154

Part 1 Principles and elementary applications

other area of mathematics: you can subject them to arbitrary extreme conditions and they continue to make sense.2 What value of R does the robot estimate in general? The most probable value of R is found within one unit by setting p(R ) = p(R − 1) and solving for R . This yields r (6.21) R = (N + 1) , n which is to be compared with (3.26) for the peak of the sampling distribution. If R is not an integer, the most probable value is the next integer below R . The robot anticipates that the fraction of red balls in the original urn should be about equal to the fraction in the observed sample, just as you and I would from intuition. For a more refined calculation, let us find the mean value, or expectation, of R over this posterior distribution: R = E(R|D N I0 ) =

N

Rp(R|D N I0 ).

(6.22)

R=0

To do the summation, note that

R R+1 (R + 1) = (r + 1) , r r +1

(6.23)

and so, using (6.16) again, R + 1 = (r + 1)

(N + 2)(r + 1) N + 1 −1 N + 2 . = (n + 2) n+2 n+1

(6.24)

When (n, r, N ) are large, the expectation of R is very close to the most probable value (6.21), indicating either a sharply peaked posterior distribution or a symmetric one. This result becomes more significant when we ask: ‘What is the expected fraction F of red balls left in the urn after this drawing?’ This is F =

r +1 R − r = . N −n n+2

(6.25)

6.4 Predictive distributions Instead of using probability theory to estimate the unobserved contents of the urn, we may use it as well to predict future observations. We ask a different question: ‘After having drawn a sample of r red balls in n draws, what is the probability that the next one drawn will be red?’ Defining the propositions: Ri ≡ red on the ith draw, 2

1 ≤ i ≤ N,

(6.26)

By contrast, the intuitive ad hockeries of current ‘orthodox’ statistics generally give reasonable results within some ‘safe’ domain for which they were invented; but invariably they are found to yield nonsense in some extreme case. This, examined in Chapter 17, is what one expects of results which are only approximations to an exact theory; as one varies the conditions, the quality of the approximation varies.

6 Elementary parameter estimation

155

this is p(Rn+1 |D N I0 ) =

N

p(Rn+1 R|D N I0 ) =

p(Rn+1 |R D N I0 ) p(R|D N I0 ),

(6.27)

R

R=0

or p(Rn+1 |D N I0 ) =

N R − r N + 1 −1 R N − R . N −n n+1 r n −r R=0

(6.28)

Using the summation formula (6.16) again, we find, after some algebra, p(Rn+1 |D N I0 ) =

r +1 , n+2

(6.29)

the same as (6.25). This agreement is another example of the rule noted before: a probability is not the same thing as a frequency; but, under quite general conditions, the predictive probability of an event at a single trial is numerically equal to the expectation of its frequency in some specified class of trials. Equation (6.29) is a famous old result known as Laplace’s rule of succession. It has played a major role in the history of Bayesian inference, and in the controversies over the nature of induction and inference. We shall find it reappearing many times; finally, in Chapter 18 we examine it carefully to see how it became controversial, but also how easily the controversies can be resolved today. The result (6.29) has a greater generality than would appear from our derivation. Laplace first obtained it, not in consideration of drawing from an urn, but from considering a mixture of binomial distributions, as we shall do presently in (6.73). The above derivation in terms of urn sampling had been found as early as 1799 (see Zabell, 1989), but became well known only through its rediscovery in 1918 by C. D. Broad of Cambridge University, England, and its subsequent emphasis by Wrinch and Jeffreys (1919), W. E. Johnson (1924, 1932), and H. Jeffreys (1939). It was initially a great surprise to find that the urn result (6.29) is independent of N . But this is only the point estimate; what accuracy does the robot claim for this estimate of R? The answer is contained in the same posterior distribution (6.17) that gave us (6.29); we may find its variance R 2 − R2 . Extending (6.23), note that

R R+2 (R + 1)(R + 2) = (r + 1)(r + 2) . (6.30) r r +2 The summation over R is again simple, yielding

N +1 (R + 1)(R + 2) = (r + 1)(r + 2) n+1 =

−1

N +3 n+3

(r + 1)(r + 2)(N + 2)(N + 3) . (n + 2)(n + 3)

(6.31)

156

Part 1 Principles and elementary applications

Then, noting that var(R) = R 2 − R2 = (R + 1)2 − (R + 1)2 and writing for brevity p = F = (r + 1)/(n + 2), from (6.24) and (6.31) we find var(R) =

p(1 − p) (N + 2)(N − n). n+3

(6.32)

Therefore, our (mean) ± (standard deviation) combined point and interval estimate of R is # p(1 − p) (N + 2)(N − n). (6.33) (R)est = r + (N − n) p ± n+3 The factor (N − n) inside the square root indicates that, as we would expect, the estimate becomes more accurate as we sample a larger fraction of the contents of the urn. Indeed, when n = N the contents of the urn are known, and (6.33) reduces, as it should, to (r ± 0), in agreement with deductive reasoning. Looking at (6.33), we note that R − r is the number of red balls remaining in the urn, and N − n is the total number of balls left in the urn; so an analytically simpler expression is found if we ask for the (mean) ± (standard deviation) estimate of the fraction of red balls remaining in the urn after the sample is drawn. This is found to be # (R − r )est p(1 − p) N + 2 = p± , 0 ≤ n < N, (6.34) (F)est = N −n n+3 N −n and this estimate becomes less accurate as we sample a larger portion of the balls. In the limit N → ∞, this goes into # p(1 − p) , (6.35) (F)est = p ± n+3 which corresponds to the binomial distribution result. As an application of this, while preparing this chapter we heard a news report that a ‘random poll’ of 1600 voters was taken, indicating that 41% of the population favored a certain candidate in the next election, and claiming a ±3% margin of error for this result. Let us check the consistency of these numbers against our theory. To obtain (F)est = F(1 ± 0.03), we require, according to (6.35), a sample size n given by n+3=

1 − 0.41 1− p 1 × 1111 = 1598.9 = p (0.03)2 0.41

(6.36)

or n 1596. The close agreement suggests that the pollsters are using this theory (or at least giving implied lip service to it in their public announcements). These results, found with a uniform prior for p(R|N I0 ) over 0 ≤ R ≤ N , correspond very well with our intuitive common sense judgments. Other choices of the prior can affect the conclusions in ways which often surprise us at first glance; then, after some meditation, we see that they were correct after all. Let us put probability theory to a more severe test by considering some increasingly surprising examples.

6 Elementary parameter estimation

157

6.5 Truncated uniform priors Suppose our prior information had been different from the above I0 ; our new prior information I1 is that we know from the start that 0 < R < N ; there is at least one red and one white ball in the urn. Then the prior (6.14) must be replaced by p(R|N I1 ) =

1 N −1 0

if 1 ≤ R ≤ N − 1

(6.37)

otherwise,

and our summation formula (6.16) must be corrected by subtracting the two terms R = 0, R = N . Note that, if R = 0, then

R R+1 = = δ(r, 0), (6.38) r r +1 and, if R = N , then

N−R n −r

= δ(r, n),

(6.39)

so we have the summation formulas

N −1 N R N−R N +1 N = − δ(r, n) − δ(r, 0), S= r n −r n+1 n n R=1

(6.40)

N −1 N R+1 N − R N +2 N +1 = − δ(r, n) − δ(r, 0). r + 1 n − r n + 2 n + 1 n R=1

(6.41)

What seems surprising at first is that, as long as the observed r is in 0 < r < n, the new terms vanish, and so the previous posterior distribution (6.17) is unchanged: p(R|D N I1 ) = p(R|D N I0 ),

0 < r < n.

(6.42)

Why does the new prior information make no difference? Indeed, it would certainly make a difference in any form of probability theory that uses only sampling distributions; for the sample space is changed by the new information. Yet, on meditation, we see that the result (6.42) is correct, for in this case the data tell us by deductive reasoning that R cannot be zero or N ; so, whether the prior information does or does not tell us the same thing cannot matter: our state of knowledge about R is the same and probability theory as logic so indicates. We discuss this further in Section 6.9.1. Suppose that our data were r = 0; now the sum S in (6.15) is different:

N N +1 , (6.43) − S= n n+1

158

Part 1 Principles and elementary applications

and in place of (6.17) the posterior probability distribution for R is found to be, after some calculation,

N N−R , 1 ≤ R ≤ N − 1, (6.44) p(R|r = 0, N I1 ) = n+1 n and zero outside that range. But still, within that range, the relative probabilities of different values of R are not changed; we readily verify that the ratio N +1 p(R|r = 0, N I1 ) = , p(R|r = 0, N I0 ) N −n

1 ≤ R ≤ N − 1,

(6.45)

is independent of R. What has happened here is that the datum r = 0 gives no evidence against the hypothesis that R = 0 and some evidence for it; so on prior information I0 which allows this, R = 0 is the most probable value. But the prior information I1 now makes a decisive difference; it excludes just that value, and thus forces all the posterior probability to be compressed into a smaller range, with an upward adjustment of the normalization coefficient. We learn from this example that different priors do not necessarily lead to different conclusions; and whether they do or do not can depend on which data set we happen to get – which is just as it should be. Exercise 6.1. Find the posterior probability distribution p(R|r = n, N I1 ) by a derivation like the above. Then find the new (mean) ± (standard deviation) estimate of R from this distribution, and compare it with the above results from p(R|r = n, N I0 ). Explain the difference so that it seems obvious intuitively. Now show how well you understand this problem by describing in words, without doing the calculation, how the result would differ if we had prior information that (3 ≤ R ≤ N ); i.e. the urn had initially at least three red balls, but there was no prior restriction on large values.

6.6 A concave prior The rule of succession, based on the uniform prior p(R|N I ) ∝ const. (0 ≤ R ≤ N )}, leads to a perhaps surprising numerical result, that the expected fraction (6.25) of red balls left in the urn is not the fraction r/n observed in the sample drawn, but slightly different, (r + 1)/(n + 2). What is the reason for this small difference? The following argument is hardly a derivation, but only a line of free association. Note first that Laplace’s rule of succession can be written in the form n(r/n) + 2(1/2) r +1 = , (6.46) n+2 n+2 which exhibits the result as a weighted average of the observed fraction r/n and the prior expectation 1/2, the data weighted by the number n of observations, the prior expectation by 2. It seems that the uniform prior carries a weight corresponding to two observations. Then could that prior be interpreted as a posterior distribution resulting from two observations

6 Elementary parameter estimation

159

(n, r ) = (2, 1)? If so, it seems that we must start from a still more uninformative prior than the uniform one. But is there any such thing as a still more uninformative prior? Mathematically, this suggests that we try to apply Bayes’ theorem backwards, to find whether there is any prior that would lead to a uniform posterior distribution. Denote this conjectured, still more primitive, state of ‘pre-prior’ information by I00 . Then Bayes’ theorem would read: p(R|D I00 ) = p(R|I00 )

p(D|R I00 ) = const., p(D|I00 )

0 ≤ R ≤ N,

(6.47)

and the sampling distribution is still the hypergeometric distribution (6.1), because when R is specified it renders any vague information like I00 irrelevant: p(D|R I0 ) = p(D|R I00 ). With the assumed sample, n = 2, r = 1, the hypergeometric distribution reduces to h(r = 1|N , R, n = 2) =

R(N − R) , N (N − 1)

0 ≤ R ≤ N,

(6.48)

from which we see that there is no pre-prior that yields a constant posterior distribution over the whole range (0 ≤ R ≤ N ); it would be infinite for R = 0 and R = N . But we have just seen that the truncated prior, constant in (1 ≤ R ≤ N − 1), yields the same results if it is known that the urn contains initially at least one red and one white ball. Since our presupposed data (n, r ) = (2, 1) guarantees this, we see that we have a solution after all. Consider the prior that emphasizes extreme values: p(R|I00 ) ≡

A , R(N − R)

1 ≤ R ≤ N − 1,

(6.49)

where A stands for a normalization constant, not necessarily the same in all the following equations. Given new data D ≡ (n, r ), if 1 ≤ r ≤ n − 1 this yields, using (6.1), the posterior distribution

R N−R A R−1 N − R−1 A = . (6.50) p(R|D N I00 ) = R(N − R) r n −r r (n − r ) r − 1 n −r −1 From (6.16) we may deduce the summation formula

N −1 R−1 N − R−1 N −1 = , n −r −1 n−1 r −1 r =1 so the correctly normalized posterior distribution is

N − 1 −1 R − 1 N − R − 1 , p(R|D N I00 ) = n−1 r −1 n −r −1

1 ≤ R ≤ N − 1, 1 ≤ r ≤ n − 1,

1 ≤ R ≤ N − 1, 1 ≤ r ≤ n − 1,

(6.51)

(6.52)

which is to be compared with (6.17). As a check, if n = 2, r = 1, this reduces to the desired prior (6.37): p(R|D N I00 ) = p(R|N I1 ) =

1 , N −1

1 ≤ R ≤ N − 1.

(6.53)

160

Part 1 Principles and elementary applications

At this point, we can leave it as an exercise for the reader to complete the analysis for the concave prior with derivations analogous to (6.22)–(6.35).

Exercise 6.2. Using the general result (6.52), repeat the calculations analogous to (6.22)–(6.35) and prove three exact results: (a) the integral equation (6.11) is satisfied, so (6.6) still holds; (b) for general data compatible with the prior in the sense that 0 ≤ n ≤ N , 1 ≤ r ≤ n − 1 (so that the sample drawn includes at least one red and one white ball), the posterior mean estimated fractions R/N and (R − r )/(N − n) are both equal to the observed fraction in the sample, f = r/n; the estimates now follow the data exactly so the concave prior (6.49) is given zero weight. Finally, (c) the (mean) ± (standard deviation) estimate is given by # n f (1 − f ) (R)est = f ± 1− , (6.54) N n+1 N also a simpler result than the analogous (6.33) found previously for the uniform prior.

Exercise 6.3. Now note that if r = 0 or r = n, the step (6.50) is not valid. Go back to the beginning and derive the posterior distribution for these cases. Show that if we draw one ball and find it not red, the estimated fraction of red in the urn now drops from 1/2 to approximately 1/ log(N ) (whereas with the uniform prior it drops to (r + 1)/(n + 2) = 1/3). The exercises show that the concave prior gives many results simpler than those of the uniform one, but has also some near instability properties that become more pronounced with large N . Indeed, as N → ∞ the concave prior approaches an improper (non-normalizable) one, which must give absurd answers to some questions, although it still gives reasonable answers to most questions (those in which the data are so informative that they remove the singularity associated with the prior). 6.7 The binomial monkey prior Suppose prior information I2 is that the urn was filled by a team of monkeys who tossed balls in at random, in such a way that each ball entering had independently the probability g of being red. Then our prior for R will be the binomial distribution (3.92): in our present notation,

N R g (1 − g) N −R , 0 ≤ R ≤ N, (6.55) p(R|N I2 ) = R and our prior estimate of the number of red balls in the urn will be the (mean) ± (standard deviation) over this distribution: (6.56) (R)est = N g ± N g(1 − g).

6 Elementary parameter estimation

The sum (6.10) is readily evaluated for this prior, with the result that

n r N ≥ n. p(D|N I ) = g (1 − g)n−r , r

161

(6.57)

Since this is independent of N , this prior also satisfies our integral equation (6.11), so p(N R|D I2 ) = p(N |D I2 ) p(R|N D I2 ),

(6.58)

in which the first factor is the relatively uninteresting standard result (6.6). We are interested in the factor p(R|N D I2 ) in which N is considered known. We are interested also in the other factorization p(N R|D I2 ) = p(R|D I2 ) p(N |R D I2 ),

(6.59)

in which p(R|D I ) tells us what we know about R, regardless of N . (Try to guess intuitively how p(R|D N I ) and p(R|D I ) would differ for any I , before seeing the calculations.) Likewise, the difference between p(N |R D I2 ) and p(N |D I2 ) tells us how much we would learn about N if we were to learn the true R; and again our intuition can hardly anticipate the result of the calculation. We have set up quite an agenda of calculations to do. Using (6.55) and (6.1), we find

N R R N−R g (1 − g) N −R , (6.60) p(R|D N I2 ) = A R r n −r where A is another normalization constant. To evaluate it, note that we can rearrange the binomial coefficients:

N R N−R N n N −n = . (6.61) R r n −r n r R −r Therefore we find the normalization by

N n N −n R p(R|D N I2 ) = A g (1 − g) N −R 1= n r R R −r R

N n r =A r ≤ R ≤ N − n + r, g (1 − g)n−r , n r and so our normalized posterior distribution for R is

N − n R−r g (1 − g) N −R−n+r , p(R|D N I2 ) = R −r from which we would make the (mean) ± (standard deviation) estimate (R)est = r + (N − n)g ± g(1 − g)(N − n).

(6.62)

(6.63)

(6.64)

But the resemblance to (6.33) suggests that we again look at it this way: we estimate the fraction of red balls left in the urn to be # g(1 − g) (R − r )est =g± . (6.65) N −n N −n

162

Part 1 Principles and elementary applications

At first glance, (6.64) and (6.65) seem to be so much like (6.33) and (6.34) that it was hardly worth the effort to derive them. But on second glance we notice an astonishing fact: the parameter p in the former equations was determined entirely by the data; while g in the present ones is determined entirely by the prior information. In fact, (6.65) is exactly the prior estimate we would have made for the fraction of red balls in any subset of N − n balls in the urn, without any data at all. It seems that the binomial prior has the magical property that it nullifies the data! More precisely, with that prior the data can tell us nothing at all about the unsampled balls. Such a result will hardly commend itself to a survey sampler; the basis of his profession would be wiped out. Yet the result is correct, and there is no escape from the conclusion: if your prior information about the population is correctly described by the binomial prior, then sampling is futile (it tells you practically nothing about the population) unless you sample practically the whole population. How can such a thing happen? Comparing the binomial prior with the uniform prior, one would suppose that the binomial prior, being moderately peaked, expresses more prior information about the proportion R/N of red balls; therefore by its use one should be able to improve his estimates of R. Indeed, we have found this effect, for the uncertainties in (6.64) √ and (6.65) are smaller than those in (6.33) and (6.34) by a factor of (n + 3)/(N + 2). What is intriguing is not the magnitude of the uncertainty, but the fact that (6.34) depends on the data, while (6.65) does not. It is not surprising that the binomial prior is more informative about the unsampled balls than are the data of a small sample; but actually it is more informative about them than are any amount of data; even after sampling 99% of the population, we are no wiser about the remaining 1%. So what is the invisible strange property of the binomial prior? It is in some sense so ‘loose’ that it destroys the logical link between different members of the population. But on meditation we see that this is just what was implied by our scenario of the urn being filled by monkeys tossing in balls in such a way that each ball had independently the probability g of being red. Given that filling mechanism, then knowing that any given ball is in fact red, gives one no information whatsoever about any other ball. That is, P(R1 R2 |I ) = P(R1 |I )P(R2 |I ). This logical independence in the prior is preserved in the posterior distribution.

Exercise 6.4. Investigate this apparent ‘law of conservation of logical independence’. If the propositions: ‘ith ball is red, 1 ≤ i ≤ N ’ are logically independent in the prior information, what is the necessary and sufficient condition on the sampling distribution and the data that the factorization property is retained in the posterior distribution: P(R1 R2 |D I ) = P(R1 |D I )P(R2 |D I )? This sets off another line of deep thought. In conventional probability theory, the binomial distribution is derived from the premise of causal independence of different tosses. In

6 Elementary parameter estimation

163

Chapter 3 we found that consistency requires one to reinterpret this as logical independence. But now, can we reason in the opposite direction? Does the appearance of a binomial distribution already imply logical independence of the separate events? If so, then we could understand the weird result just derived, and anticipate many others like it. We shall return to these questions in Part 2, after acquiring some more clues. 6.8 Metamorphosis into continuous parameter estimation As noted in the introduction to this chapter, if our hypotheses become so ‘dense’ that neighboring hypotheses (i.e. hypotheses with nearly the same values of the index t) are barely distinguishable in their observable consequences, then, whatever the data, their posterior probabilities cannot differ appreciably. So there cannot be one sharply defined hypothesis that is strongly favored over all others. Then it may be appropriate and natural to think of t as a continuously variable parameter θ, and to interpret the problem as that of making an estimate of the parameter θ , and a statement about the accuracy of the estimate. A common and useful custom is to use Greek letters to denote continuously variable parameters, Latin letters for discrete indices or data values. We shall adhere to this except when it would conflict with a more deeply entrenched custom.3 The hypothesis testing problem has thus metamorphosed into a parameter estimation one. But it can equally well metamorphose back; for the hypothesis that a parameter θ lies in a certain interval a < θ < b is, of course, a compound hypothesis as defined in Chapter 4, so an interval estimation procedure (i.e. one where we specify the accuracy by giving the probability that the parameter lies in a given interval) is automatically a compound hypothesis testing procedure. Indeed, we followed just this path in Chapter 4 and found ourselves, at Eq. (4.67), doing what is really parameter estimation. It seemed to us natural to pass from testing simple discrete hypotheses, to estimating continuous parameters, and finally to testing compound hypotheses at Eq. (4.74), because probability theory as logic does this automatically. As in our opening remarks, we do not see parameter estimation and hypothesis testing as fundamentally different activities – one aspect of the greater unity of probability theory as logic. But this unity has not seemed at all natural to some others. Indeed, in orthodox statistics parameter estimation appears very different from hypothesis testing, both mathematically and conceptually, largely because it has no satisfactory way to deal with compound hypotheses or prior information. We shall see some specific consequences of this in Chapter 17. Of course, parameters need not be one-dimensional; but let us consider first some simple cases where they are. 6.9 Estimation with a binomial sampling distribution We have already seen an example of a binomial estimation problem in Chapter 4, but we did not note its generality. There are hundreds of real situations in which each time a simple 3

Thus for generations the charge on the electron and the velocity of light have been denoted by e, c, respectively. No scientist or engineer could bring himself to represent them by Greek letters, even when they are the parameters being estimated.

164

Part 1 Principles and elementary applications

measurement or observation is made, there are only two possible results. The coin will show either heads or tails, the battery will or will not start the car, the baby will be a boy or a girl, the check will or will not arrive in the mail today, the student will pass or flunk the examination, etc. As we noted in Chapter 3, the first comprehensive sampling theory analysis of such an experiment was by James Bernoulli (1713) in terms of drawing balls from an urn, so such experiments are commonly called Bernoulli trials. Traditionally, for any such binary experiment, we call one of the results, arbitrarily, a ‘success’ and the other a ‘failure’. Generally, our data will be a record of the number of successes and the number of failures;4 the order in which they occur may or may not be meaningful, and, if it is meaningful, it may or may not be known, and, if it is known, it may or may not be relevant to the question we are asking. Presumably, the conditions of the experiment will tell us whether the order is meaningful or known; and we expect probability theory to tell us whether it is relevant. For example, if we toss ten coins simultaneously, then we have performed ten Bernoulli trials, but it is not meaningful to speak of their ‘order’. If we toss one coin 100 times and record each result, then the order of the results is meaningful and known; but in trying to judge whether the coin is ‘honest’, common sense probably tells us that the order is not relevant. If we are observing patient recoveries from a disease and trying to judge whether resistance to the disease was improved by a new medicine introduced a month ago, this is much like drawing from an urn whose contents may have changed. Intuition then tells us that the order in which recoveries and nonrecoveries occur is not only highly relevant, it is the crucial information without which no inference about a change is possible.5 To set up the simple general binomial sampling problem, define 1 if the ith trial yields success (6.66) xi ≡ 0 otherwise. Then our data are D ≡ {x1 , . . . , xn }. The prior information I specifies that there is a parameter θ such that at each trial we have, independently of anything we know about other trials, the probability θ for a success, therefore the probability (1 − θ) for a failure. As discussed before, by ‘independent’ we mean logical independence. There may or may not be causal independence, depending on further details of I that do not matter at the moment. The sampling distribution is then (mathematically, this is our definition of the model to be studied): p(D|θ I ) =

n

p(xi |θ I ) = θ r (1 − θ )n−r ,

(6.67)

i=1 4

5

However, there are important problems involving censored data, to be considered later, in which only the successes can be recorded (or only the failures), and one does not know how many trials were performed. For example, a highway safety engineer knows from the public record how many lives were lost in spite of his efforts, but not how many were saved because of them. Of course, the final arbiter of relevance is not our intuition, but the equations of probability theory. But, as we shall see later, judging this can be a tricky business. Whether a given piece of information is or is not relevant depends not only on what question we are asking, but also on the totality of all of our other information.

6 Elementary parameter estimation

165

in which r is the number of successes observed, (n − r ) the number of failures. Then, with any prior probability density function p(θ|I ), we have immediately the posterior pdf p(θ |D I ) =

p(θ|I ) p(D|θ I ) = Ap(θ|I )θ r (1 − θ )n−r , dθ p(θ|I ) p(D|θ I )

(6.68)

where A is a normalizing constant. With a uniform prior for θ, p(θ|I ) = 1,

0 ≤ θ ≤ 1,

the normalization is determined by an Eulerian integral, 1 r !(n − r )! dθ θ r (1 − θ)n−r = A−1 = (n + 1)! 0

(6.69)

(6.70)

and the normalized pdf is p(θ|D I ) =

(n + 1)! r θ (1 − θ)n−r , r !(n − r )!

identical to Bayes’ original result, noted in Chapter 4, Eq. (4.67). Its moments are 1 (n + 1)! (r + m)! m m dθ θ r +m (1 − θ)n−r = θ = E(θ |D I ) = A (n + m + 1)! r! 0 (r + 1)(r + 2) · · · (r + m) , = (n + 2)(n + 3) · · · (n + m + 1) leading to the predictive probability for success at the next trial of 1 r +1 , dθ θ p(θ|D I ) = p ≡ θ = n +2 0

(6.71)

(6.72)

(6.73)

in which we see Laplace’s rule of succession in its original derivation. Likewise, the (mean) ± (standard deviation) estimate of θ is # $ p(1 − p) 2 2 . (6.74) (θ )est = θ ± θ − θ = p ± n+3 Indeed, the continuous results (6.73) and (6.74) must be derivable from the discrete ones (6.29) and (6.35) by passage to the limit N → ∞; but since the latter equations are independent of N , the limit has no effect. In this limit the concave pre-prior distribution (6.49) would go into an improper prior for θ : dθ A → , R(N − R) θ(1 − θ )

(6.75)

for which some sums or integrals would diverge; but that is not the strictly correct method of calculation. For example, to calculate the posterior expectation of any function f (R/N ) in the limit of arbitrarily large N , we should take the limit of the ratio f (R/N ) = Num/Den,

166

Part 1 Principles and elementary applications

where Num ≡ Den ≡

N −1 f (R/N ) p(D|N R I ), R(N − R) R=1 N −1 R=1

(6.76)

1 p(D|N R I ), R(N − R)

and, under very general conditions, this limit is well-behaved, leading to useful results. The limiting improper pre-prior (6.75) was advocated by Haldane (1932) and Jeffreys (1939), in the innocent days before the marginalization paradox, when nobody worried about such fine points. We were almost always lucky in that our integrals converged in the limit, so we used them directly, thus actually calculating the ratio of the limits rather than the limit of the ratio; but nevertheless getting the right answers. With this fine point now clarified, all this and its obvious generalizations seem perfectly straightforward; however, note the following point, important for a current controversy.

6.9.1 Digression on optional stopping We did not include n in the conditioning statements in p(D|θ I ) because, in the problem as defined, it is from the data D that we learn both n and r . But nothing prevents us from considering a different problem in which we decide in advance how many trials we shall make; then it is proper to add n to the prior information and write the sampling probability as p(D|nθ I ). Or, we might decide in advance to continue the Bernoulli trials until we have achieved a certain number r of successes, or a certain log-odds u = log[r/(n − r )]; then it would be proper to write the sampling probability as p(D|r θ I ) or p(D|uθ I ), and so on. Does this matter for our conclusions about θ? In deductive logic (Boolean algebra) it is a triviality that A A = A; if you say: ‘A is true’ twice, this is logically no different from saying it once. This property is retained in probability theory as logic, since it was one of our basic desiderata that, in the context of a given problem, propositions with the same truth value are always assigned the same probability. In practice this means that there is no need to ensure that the different pieces of information given to the robot are independent; our formalism has automatically the property that redundant information is not counted twice. Thus, in our present problem, the data, as defined, tell us n. Then, since p(n|nθ I ) = 1, the product rule may be written p(nr order|nθ I ) = p(r order|nθ I ) p(n|nθ I ) = p(r order|nθ I ).

(6.77)

When something is known already from the prior information, then, whether the data do or do not tell us the same thing cannot matter; the likelihood function is the same. Likewise, write the product rule as p(θ n|D I ) = p(θ|n D I ) p(n|D I ) = p(n|θ D I ) p(θ|D I ),

(6.78)

6 Elementary parameter estimation

167

or, since p(n|θ D I ) = p(n|D I ) = 1, p(θ|n D I ) = p(θ|D I ).

(6.79)

In this argument we could replace n by any other quantity (such as r , or (n − r ), or u ≡ log r/(n − r )) that was known from the data; if any part of the data happens to be included also in the prior information, then that part is redundant and it cannot affect our final conclusions. Even so, some statisticians (for example, Armitage, 1960) who look only at sampling distributions, claim that the stopping rule does affect our inference. Apparently, they believe that if a statistic such as r is not known in advance, then parts of the sample space referring to false values of r remain relevant to our inferences, even after the true value of r becomes known from the data D, although they would not be relevant (they would not even be in the sample space) if the true value were known before seeing the data. Of course, that violates the principle A A = A of elementary logic; it is astonishing that such a thing could be controversial in the 20th century. It is evident that this same comment applies with equal force to any function f (D) of the data, whether or not we are using it as an estimator. That is, whether f was or was not known in advance can have a major effect on our sample space and sampling distributions; but as redundant information it cannot have any effect on any rational inferences from the data. Furthermore, inference must depend on the data set that was observed, not on data sets that might have been observed but were not – because merely noting the possibility of unobserved data sets gives us no information that was not already in the prior information. Although this conclusion might have seemed obvious from the start, it is not recognized in orthodox statisticians because they do not think in terms of information. We shall see in Chapter 8 not only some irrational conclusions, but some absolutely spooky consequences (psychokinesis, black magic) this has had, and, in later applications, how much real damage this has caused. What if a part of the data set was actually generated by the phenomenon being studied, but for whatever reason we failed to observe it? This is a major difficulty for orthodox statistics, because then the sampling distributions for our estimators are wrong, and the problem must be reconsidered from the start. But for us it is only a minor detail, easily taken into account. We show next that probability theory as logic tells us uniquely how to deal with true but unobserved data; they must be relevant in the sense that our conclusions must depend on whether they were or were not observed; so they have a mathematical status somewhat like that of a set of nuisance parameters.

6.10 Compound estimation problems We now consider in some depth a class of problems more complicated in structure, where more than one process is occurring but not all the results are observable. We want to make inferences not only about parameters in the model, but about the unobserved data.

168

Part 1 Principles and elementary applications

The mathematics to be developed next is applicable to a large number of quite different real problems. To form an idea of the scope of the theory, consider the following scenarios. (A) In the general population, there is a frequency p at which any given person will contract a certain disease within the next year; and then another frequency θ that anyone with the disease will die of it within a year. From the observed variations {c1 , c2 , . . .} of deaths from the disease in successive years (which is a matter of public record), estimate how the incidence of the disease {n 1 , n 2 , . . .} is changing in the general population (which is not a matter of public record). (B) Each week, a large number of mosquitos, N , is bred in a stagnant pond near this campus, and we set up a trap on the campus to catch some of them. Each mosquito lives less than a week, during which there is a frequency p of flying onto the campus, and, once on the campus, a frequency θ of being caught in our trap. We count the numbers {c1 , c2 , . . .} caught each week. From these data and whatever prior information we have, what can we say about the numbers {n 1 , n 2 , . . .} on the campus each week, and what can we say about N ? (C) We have a radioactive source (say sodium 22 (22 Na), for example) which is emitting particles of some sort (say, positrons). There is a rate p, in particles per second, at which a radioactive nucleus sends particles through our counter; and each particle passing through produces counts at the rate θ. From measuring the number {c1 , c2 , . . .} of counts in different seconds, what can we say about the numbers {n 1 , n 2 , . . .} actually passing through the counter in each second, and what can we say about the strength of the source?

The common feature in these problems is that we have two ‘binary games’ played in succession, and we can observe only the outcome of the last one. From this, we are to make the best inferences we can about the original cause and the intermediate conditions. This could be described also as the problem of trying to recover, in one special case, censored data. We want to show particularly how drastically these problems are changed by various changes in the prior information. For example, our estimates of the variation in incidence of a disease are greatly affected, not only by the data, but by our prior information about the process by which one contracts that disease.6 In our estimates we will want to (1) state the ‘best’ estimate possible on the data and prior information; and (2) make a statement about the accuracy of the estimate, giving again our versions of ‘point estimation’ and ‘interval estimation’ about which Fisher commented. We shall use the language of the radioactive source scenario, but it will be clear enough that the same arguments and the same calculations apply in many others.

6.11 A simple Bayesian estimate: quantitative prior information Firstly, we discuss the parameter φ, which a scientist would call the ‘efficiency’ of the counter. By this we mean that, if φ is known, then each particle passing through the counter has independently the probability φ of making a count. Again we emphasize that this is not 6

Of course, in this first venture into the following kind of analysis, we shall not take into account all the factors that operate in the real world, so some of our conclusions may be changed in a more sophisticated analysis. However, nobody would see how to do that unless he had first studied this simple introductory example.

6 Elementary parameter estimation

169

mere causal independence (which surely always holds, as any physicist would assure us); we mean logical independence, i.e., if φ is known, then knowing anything about the number of counts produced by other particles would tell us nothing more about the probability for the next particle making a count.7 We have already stressed the distinction between logical and causal dependence many times; and now we have another case where failure to understand it could lead to serious errors. The point is that causal influences operate in the same way independently of your state of knowledge or mine; thus, if φ is not known, then everybody still believes that successive counts are causally independent. But they are no longer logically independent; for then knowing the number of counts produced by other particles tells us something about φ, and therefore modifies our probability that the next particle will produce a count. The situation is much like that of sampling with replacement, discussed in Chapter 3, where each ball drawn tells us something more about the contents of the urn. From the independence, the probability that n particles will produce exactly c counts in any specified order is φ c (1 − φ)n−c , and there are nc possible sequences producing c counts, so the probability of getting c counts regardless of order is the binomial distribution

n c 0 ≤ c ≤ n. (6.80) b(c|n, φ) = φ (1 − φ)n−c , c From the standpoint of logical presentation in the real world, however, we have to carry out a kind of bootstrap operation with regard to the quantity φ; for how could it be known? Intuitively, you may have no difficulty in seeing the procedure you would use to determine φ from measurements with the counter. But, logically, we need to have the calculation about to be given before we can justify that procedure. So, for the time being, we’ll just have to suppose that φ is a number given to us by our teacher in assigning us this problem, and have faith that, in the end, we shall understand how our teacher determined it. Now let us introduce a quantity r which is the probability at which in any one second that any particular nucleus will emit a particle that passes through the counter. We assume the number of nuclei N to be so large and the half-life so long that we need not consider N as a variable for this problem. So there are N nuclei, each of which has independently the probability r of sending a particle through our counter in any one second. The quantity r is also, for present purposes, just a number given to us in the statement of the problem, because we have not yet seen, in terms of probability theory, the line of reasoning by which we could convert measurements into a numerical value of r (but again, you see intuitively, without any hesitation, that r is a way of describing the half-life of the source). Suppose we were given N and r ; what is the probability, on this evidence, that in any one second exactly n particles will pass through the counter? That is the same binomial 7

In practice, there is a question of resolving time; if the particles come too close together we may not be able to see the counts as separate, because the counter experiences a ‘dead time’ after a count, during which it is unable to respond to another particle. We have disregarded those difficulties for this problem and imagined that we have infinitely good resolving time (or, what amounts to the same thing, that the counting rate is so low that there is negligible probability for missing a count). After we have developed the theory, the reader will be asked (Exercise 6.5) to generalize it to take these factors into account.

170

Part 1 Principles and elementary applications

distribution problem, so the answer is b(n|N , r ) =

N n r (1 − r ) N −n . n

(6.81)

But in this case there’s a good approximation to the binomial distribution, because the number N is enormously large and r is enormously small. In the limit N → ∞, r → 0 in such a way that Nr → s = const., what happens to (6.81)? To find this, write r = s/N , and pass to the limit N → ∞. Then s n N! r n = N (N − 1) · · · (N − n + 1) (N − n)! N

(6.82) 2 n−1 1 n =s 1− 1− ··· 1 − , N N N which goes into s n in the limit. Likewise, s N −n → exp{−s}, (1 − r ) N −n = 1 − N

(6.83)

and so the binomial distribution (6.81) goes over into the simpler Poisson distribution: p(n|Nr ) → p(n|s) = exp{−s}

sn , n!

(6.84)

and it will be handy for us to take this limit. The number s is essentially what the experimenter calls his ‘source strength’, the expectation of the number of particles per second. Now we have enough ‘formalism’ to start solving useful problems. Suppose we are not given the number of particles n in the counter, but only the source strength s. What is the probability, on this evidence, that we shall see exactly c counts in any one second? Using our method of resolving the proposition c into a set of mutually exclusive alternatives, then applying the sum rule and the product rule: p(c|φs) =

∞

p(cn|φs) =

p(c|nφs) p(n|φs) =

n

n=0

p(c|φn) p(n|s),

(6.85)

n

since p(c|nφs) = p(c|φn); i.e. if we knew the actual number n of particles in the counter, it would not matter what s was. This is perhaps made clearer by the diagram in Figure 6.1, rather like the logic flow diagrams of Figure 4.3. In this case, we think of the diagram as indicating not only the logical connections, but also the causal ones; s is the physical cause which partially determines n; and then n in turn is the physical cause which partially determines c. To put it another way, s can influence c only through its intermediate influence on n. We saw the same logical situation in the Chapter 5 horse racing example.

s

n Fig. 6.1. The causal influences.

c

6 Elementary parameter estimation

171

Since we have worked out both p(c|φn) and p(n|s), we need only substitute them into (6.85); after some algebra we have p(c|φs) =

∞ n=c

n! φ c (1 − φ)n−c c!(n − c)!

exp{−s}s n n!

=

exp{−sφ}(sφ)c . c!

(6.86)

This is again a Poisson distribution with expectation c =

∞

cp(c|φs) = sφ.

(6.87)

c=0

Our result is hardly surprising. We have a Poisson distribution with a mean value which is the product of the source strength times the efficiency of the counter. Without going through the analysis, that is just the estimate of c that we would make intuitively, although it is unlikely that anyone could have guessed from intuition that the distribution still has the Poissonian form. In practice, it is c that is known, and n that is unknown. If we knew the source strength s and also the number of counts c, what would be the probability, on that evidence, that there were exactly n particles passing through the counter during that second? This is a problem which arises all the time in physics laboratories, because we may be using the counter as a ‘monitor’, and have it set up so that the particles, after going through the counter, then initiate some other reaction which is the one we’re really studying. It is important to get the best possible estimates of n, because that is one of the numbers we need in calculating the cross-section of this other reaction. Bayes’ theorem gives p(n|φcs) = p(n|s)

p(n|s) p(c|nφ) p(c|nφs) = , p(c|φs) p(c|φs)

(6.88)

and all these terms have been found above, so we just have to substitute (6.80) and (6.84)– (6.86) into (6.88). Some terms cancel, and we are left with: p(n|φcs) =

exp{−s(1 − φ)}[s(1 − φ)]n−c . (n − c)!

(6.89)

It is interesting that we still have a Poisson distribution, now with parameter s(1 − φ), but shifted upward by c; because, of course, n could not be less than c. The expectation over this distribution is n =

np(n|φcs) = c + s(1 − φ).

(6.90)

n

So, now what is the best guess the robot can make as to the number of particles responsible for those c counts? Since this is the first time we have faced this issue in a serious way, let us take time for some discussion.

172

Part 1 Principles and elementary applications

6.11.1 From posterior distribution function to estimate Given the posterior pdf for some general parameter α, continuous or discrete, what ‘best’ estimate of α should the robot make, and what accuracy should it claim? There is no one ‘right’ answer; the problem is really one of decision theory which asks, ‘What should we do?’ This involves value judgments and therefore goes beyond the principles of inference, which ask only ‘What do we know?’ We shall return to this in Chapters 13 and 14, but for now we give a preliminary discussion adequate for the simple problems being considered. Laplace (1774) already encountered this problem. The unknown true value of a parameter is α, and given some data D and prior information I we are to make an estimate α ∗ (D, I ) which depends on them in some way. In the jargon of the trade, α ∗ is called an ‘estimator’, and nothing prevents us from considering any function of (D, I ) whatsoever as a potential estimator. But which estimator is best? Our estimate will have an error e = (α ∗ − α), and Laplace gave as a criterion that we should make that estimate which minimizes the expected magnitude |e|. He called this the ‘most advantageous’ method of estimation. Laplace’s criterion was generally rejected for 150 years in favor of the least squares method of Gauss and Legendre; we seek the estimate that minimizes the expected square of the error. In these early works it is not always clear whether this means expected over the sampling pdf for α ∗ or over the posterior pdf for α; the distinction was not always recognized, and the confusion was encouraged by the fact that in some cases considerations of symmetry lead us to the same final conclusion from either. Some of the bad consequences of using the former (sampling distribution) are noted in Chapter 13. It is clear today that the former ignores all prior information about α, while the latter takes it into account and is therefore what we want; taking expectations over the posterior pdf for α, the expected squared error of the estimate is (α − α ∗ )2 = α 2 − 2α ∗ α + α ∗2 = (α ∗ − α)2 + (α 2 − α2 ). The choice α ∗ = α =

(6.91)

dα αp(α|D I ),

(6.92)

that is, the posterior mean value, therefore always minimizes the expected square of the error, over the posterior pdf for α, and the minimum achievable value is the variance of the posterior pdf. The second term is the expected square of the deviation from the mean: var(α) ≡ (α − α)2 = (α 2 − α2 ),

(6.93)

often miscalled the variance of α; of course, it is really the variance of the probability distribution that the robot assigns for α. In any event, the robot can do nothing to minimize it. But the first term can be removed entirely by taking as the estimate just the mean value α ∗ = α, which is the optimal estimator by the mean square error criterion. Evidently, this result holds generally whatever the form of the posterior distribution p(α|D I ); provided only that α and α 2 exist, the mean square error criterion always

6 Elementary parameter estimation

173

leads to taking the mean value α (i.e. the ‘center of gravity’ of the posterior distribution) as the ‘best’ guess. The posterior (mean ± standard deviation) then recommends itself to us as providing a more or less reasonable statement of what we know and how accurately we know it; and it is almost always the easiest to calculate. Furthermore, if the posterior pdf is sharp and symmetrical, this cannot be very different pragmatically from any other reasonable estimate. So, in practice, we use this more than any other. In the urn inversion problems, we simply adopted this procedure without comment. But this may not be what we really want. We should be aware that there are valid arguments against the posterior mean, and cases where a different rule would better achieve what we want. The squared error criterion says that an error twice as great is considered four times as serious. Therefore, the mean value estimate, in effect, concentrates its attention most strongly on avoiding the very large (but also very improbable) errors, at the cost of possibly not doing as well as it might with the far more likely small errors. Because of this, the posterior mean value estimate is quite sensitive to what happens far out in the tails of the pdf. If the tails are very unsymmetrical, our estimate could be pulled far away from the central region where practically all the probability lies and common sense tells us the parameter is most likely to be. In a similar way, a single very rich man in a poor village would pull the average wealth of the population far away from anything representative of the real wealth of the people. If we knew this was happening, then that average would be a quite irrational estimate of the wealth of any particular person met on the street. This concentration on minimizing the large errors leads to another property that we might consider undesirable. Of course, by ‘large errors’ we mean errors that are large on the scale of the parameter α. If we redefined our parameter as some nonlinear function λ = λ(α) (for example, λ = α 3 , or λ = log(α)), an error that is large on the scale of α might seem small on the scale of λ, and vice versa. But then the posterior mean estimate ∗ (6.94) λ ≡ λ = dλ λp(λ|D I ) = dα λ(α) p(α|D I ) would not in general satisfy λ∗ = λ(α ∗ ). Minimizing the mean square error in α is not the same thing as minimizing the mean square error in λ(α). Thus, the posterior mean value estimates lack a certain consistency under parameter changes. When we change the definition of a parameter, if we continue to use the mean value estimate, then we have changed the criterion of what we mean by a ‘good’ estimate. Now let us examine Laplace’s original criterion. If we choose an estimator α + (D, I ) by the criterion that it minimizes the expected absolute error α+ ∞ dα (α + − α) f (α) + dα (α − α + ) f (α), (6.95) E ≡ |α + − α| = α+

−∞

we require dE = dα +

α+

−∞

dα f (α) −

∞

α+

dα f (α) = 0,

(6.96)

174

Part 1 Principles and elementary applications

or P(α > α + |D I ) = 1/2; Laplace’s ‘most advantageous’ estimator is the median of the posterior pdf. But what happens now on a change of parameters λ = λ(α)? Suppose that λ is strictly a monotonic increasing function of α (so that α is in turn a single-valued function of λ and the transformation is reversible). Then it is clear from the above equation that the consistency is restored: λ+ = λ(α + ). More generally, all the percentiles have this invariance property: for example, if α35 is the 35 percentile value of α: α35 dα f (α) = 0.35, (6.97) −∞

then we have at once λ35 = λ(α35).

(6.98)

Thus if we choose as our point estimate and accuracy claim the median and interquartile span over the posterior pdf, these statements will have an invariant meaning, independent of how we have defined our parameters. Note that this remains true even when α and α 2 diverge, so the mean square estimator does not exist. Furthermore, it is clear from their derivation from variational arguments, that the median estimator considers an error twice as great to be only twice as serious, so it is less sensitive to what happens far out in the tails of the posterior pdf than is the mean value. In current technical jargon, one says that the median is more robust with respect to tail variations. Indeed, it is obvious that the median is entirely independent of all variations that do not move any probability from one side of the median to the other; and an analogous property holds for any percentile. One very rich man in a poor village has no effect on the median wealth of the population. Robustness, in the general sense that the conclusions are insensitive to small changes in the sampling distribution or other conditions, is often held to be a desirable property of an inference procedure, and some authors criticize Bayesian methods because they suppose that they lack robustness. However, robustness in the usual sense of the word can always be achieved merely by throwing away cogent information! It is hard to believe that anyone could really want this if he were aware of it; but since those with only orthodox training do not think in terms of information content, they do not realize when they are wasting information. Evidently, the issue requires a much more careful discussion, to which we return later (Chapter 20) in connection with model comparison.8 In at least some problems, then, Laplace’s ‘most advantageous’ estimates have indeed two significant advantages over the more conventional (mean ± standard deviation). But 8

To anticipate our final conclusion: robustness with respect to sampling distributions is desirable only when we are not sure of the correctness of our model. But then a full Bayesian analysis will take into account all the models considered possible and their prior probabilities. The result automatically achieves the robustness previously sought in intuitive ad hoc devices; and some of those devices, such as the ‘jackknife’ and the ‘redescending psi function’ are derived from first principles, as first-order approximations to the Bayesian result. The Bayesian analysis of such problems gives us for the first time a clear statement of the circumstances in which robustness is desirable; and then, because Bayesian analysis never throws away information, it gives us more powerful algorithms for achieving robustness.

6 Elementary parameter estimation

175

before the days of computers they were prohibitively difficult to calculate numerically, so the least squares philosophy prevailed as a matter of practical expedience. Today, the computation problem is relatively trivial, and we can have whatever we want. It is easy to write computer programs which give us the option of displaying either the first and second moments or the quartiles (x25 , x50 , x75 ), and only the force of long habit makes us continue to cling to the former.9 Still another principle for estimation is to take the peak α; ˆ or, as it is called, the ‘mode’ of the posterior pdf. If the prior pdf is a constant (or is at least constant in a neighborhood of this peak and not sufficiently greater elsewhere), the result is identical to the ‘maximum likelihood’ estimate (MLE) α of orthodox statistics. It is usually attributed to R. A. Fisher, who coined that name in the 1920s, although Laplace and Gauss used the method routinely 100 years earlier without feeling any need to give it a special name other than ‘most probable value’. As explained in Chapter 16, Fisher’s ideology would not permit him to call it that. The merits and demerits of the MLE are discussed further in Chapter 13; for the present, we are not concerned with philosophical arguments, but wish only to compare the pragmatic results of MLE and other procedures.10 This leads to some surprises, as we see next. We will now return to our original problem of counting particles. At this point, a statistician of the ‘orthodox’ school of thought pays a visit to our laboratory. We describe the properties of the counter to him, and invite him to give us his best estimate as to the number of particles. He will, of course, use maximum likelihood because his textbooks have told him that (Cram´er, 1946, p. 498): ‘From a theoretical point of view, the most important general method of estimation so far known is the method of maximum likelihood.’ His likelihood function is, in our notation, p(c|φn) in its dependence on n. The value of n which maximizes it is found, within one unit, from setting n(1 − φ) p(c|φn) = = 1, p(c|φ, n − 1) n−c

(6.99)

or (n)MLE =

c . φ

(6.100)

You may find the difference between the two estimates (6.90) and (6.100) rather startling, particularly if we put in some numbers. Suppose our counter has an efficiency of 10%; in other words, φ = 0.1, and the source strength is s = 100 particles per second, so that the expected counting rate according to (6.87) is c = sφ = 10 counts per second. But in this particular second, we got 15 counts. What should we conclude about the number of particles? 9

10

In spite of all these considerations, the neat analytical results found in our posterior moments from urn and binomial models, contrasted with the messy appearance of calculations with percentiles, show that moments have some kind of theoretical significance that percentiles lack. This appears more clearly in Chapter 7. One evident pragmatic result is that the MLE fails altogether when the likelihood function has a flat top; then nothing in the data can give us a reason for preferring any point in that flat top over any other. But this is just the case we have in the ‘generalized inverse’ problems of current importance in applications; only prior information can resolve the ambiguity.

176

Part 1 Principles and elementary applications

Probably the first answer one would give without thinking is that, if the counter has an efficiency of 10%, then in some sense each count must have been due to about ten particles; so, if there were 15 counts, there must have been about 150 particles. That is, as a matter of fact, exactly what the maximum likelihood estimate (6.100) would be in this case. But what does the robot tell us? Well, it says the best estimate by the mean square error criterion is only n = 15 + 100(1 − 0.1) = 15 + 90 = 105.

(6.101)

More generally, we could write (6.90) this way: n = s + (c − c),

(6.102)

so if you see k more counts than you ‘should have’ in one second, according to the robot that is evidence for only k more particles, not 10k. This example turned out to be quite surprising to some experimental physicists engaged in work along these lines. Let’s see if we can reconcile it with our common sense. If we have an average number of counts of 10 per second with this counter, then we would guess, by rules well known, that a fluctuation in counting rate of something like the square root of this, ±3, would not be at all surprising, even if the number of incoming particles per second stayed strictly constant. On the other hand, if the average rate of flow of particles √ is s = 100 per second, the fluctuation in this rate which would not be surprising is ± 100 = ±10. But this corresponds to only ±1 in the number of counts. This shows that we cannot use a counter to measure fluctuations in the rate of arrival of particles, unless the counter has a very high efficiency. If the efficiency is high, then we know that practically every count corresponds to one particle, and we are reliably measuring those fluctuations. If the efficiency is low and we know that there is a definite, fixed source strength, then fluctuations in counting rate are much more likely to be due to things happening in the counter than to actual changes in the rate of arrival of particles. The same mathematical result, in the disease scenario, means that if a disease is mild and unlikely to cause death, then variations in the observed number of deaths are not reliable indicators of variations in the incidence of the disease. If our prior information tells us that there is a constantly operating basic cause of the disease (such as a contaminated water supply), then a large change in the number of deaths from one year to the next is not evidence of a large change in the number of people having the disease. But if practically everyone who contracts the disease dies immediately, then of course the number of deaths tells us very reliably what the incidence of the disease was, whatever the means of contracting it. What caused the difference between the Bayes and maximum likelihood solutions? The difference is due to the fact that we had prior information contained in this source strength s. The maximum likelihood estimate simply maximized the probability for getting c counts, given n particles, and that yields 150. In Bayes’ solution, we will multiply this by a prior probability p(n|s), which represents our knowledge of the antecedent situation, before maximizing, and we’ll get an entirely different value for the estimate. As we saw in the

6 Elementary parameter estimation

177

inversion of urn distributions, simple prior information can make a big change in the conclusions that we draw from a data set.

Exercise 6.5. Generalize the above calculation to take the dead-time effect into account; that is, if we know that two or more particles incident on the counter within a short time interval t can produce at most only one count, how is our estimate of n changed? These effects are important in many practical situations, and there is a voluminous literature on the application of probability theory to them (see Bortkiewicz, 1898, 1913, and Takacs, 1958).

Now let’s extend this problem a little. We are now going to use Bayes’ theorem in four problems where there is no quantitative prior information, but only one qualitative fact, and again see the effect that prior information has on our conclusions. 6.12 Effects of qualitative prior information The situation is depicted in Figure 6.2. Two robots, which we shall humanize by naming them Mr A and Mr B, have different prior information about the source of the particles. The source is hidden in another room which Mr A and Mr B are not allowed to enter. Mr A has no knowledge at all about the source of particles; for all he knows, it might be an accelerating machine which is being turned on and off in an arbitrary way, or the other room might be full of little men who run back and forth, holding first one radioactive source, then another, up to the exit window. Mr B has one additional qualitative fact: he knows that the source is a radioactive sample of long lifetime, in a fixed position. But he does not know

n1

c1

n2

c2

n3

c3 (a)

s

n1

c1

n2

c2

n3

c3

(b)

Fig. 6.2. (a) The structure of Mr A’s problem; different intervals are logically independent. (b) Mr B’s logical situation; knowledge of the existence of s makes n 2 relevant to n 1 .

178

Part 1 Principles and elementary applications

anything about its source strength (except, of course, that it is not infinite because, after all, the laboratory is not being vaporized by its presence; Mr A is also given assurance that he will not be vaporized during the experiment). They both know that the counter efficiency is 10%: φ = 0.1. Again, we want them to estimate the number of particles passing through the counter from knowledge of the number of counts. We denote their prior information by I A , I B , respectively. We commence the experiment. During the first second, c1 = 10 counts are registered. What can Mr A and Mr B say about the number n 1 of particles? Bayes’ theorem for Mr A reads p(n 1 |φc1 I A ) = p(n 1 |I A )

p(n 1 |I A ) p(c1 |φn 1 I A ) p(c1 |φn 1 I A ) = . p(c1 |φ I A ) p(c1 |φ I A )

The denominator is just a normalizing constant, and could also be written p(c1 |φn 1 I A ) p(n 1 |I A ). p(c1 |φ I A ) =

(6.103)

(6.104)

n1

But now we seem to be stuck, for what is p(n 1 |I A )? The only information about n 1 contained in I A is that n 1 is not large enough to vaporize the laboratory. How can we assign prior probabilities on this kind of evidence? This has been a point of controversy for a long time, for in any theory which regards probability as a real physical phenomenon, Mr A has no basis at all for determining the ‘true’ prior probabilities p(n 1 |I A ). 6.13 Choice of a prior Now, of course, Mr A is programmed to recognize that there is no such thing as an ‘objectively true’ probability. As the notation p(n 1 |I A ) indicates, the purpose of assigning a prior is to describe his own state of knowledge I A , and on this he is the final authority. So he does not need to argue the philosophy of it with anyone. We consider in Chapters 11 and 12 some of the general formal principles available to him for translating verbal prior information into prior probability assignments, but in the present discussion we wish only to demonstrate some pragmatic facts, by a prior that represents reasonably the information that n 1 is not infinite, and that for small n 1 there is no prior information that would justify any great variations in p(n 1 |I A ). For example, if as a function of n 1 the prior p(n 1 |I A ) exhibited features such as oscillations or sudden jumps, that would imply some very detailed prior information about n 1 that Mr A does not have. Mr A’s prior should, therefore, avoid all such structure; but this is hardly a formal principle, and so the result is not unique. But it is one of the points to be made from this example, noted by H. Jeffreys (1939), that it does not need to be unique because, in a sense, ‘almost any’ prior which is smooth in the region of high likelihood will lead to substantially the same final conclusions.11 11

We have seen already that, in some circumstances, a prior can make a very large difference in the conclusions; but to do this it necessarily modulates the likelihood function in the region of its peak, not its tails.

6 Elementary parameter estimation

179

So Mr A assigns a uniform prior probability out to some large but finite number N , p(n 1 |I A ) =

1/N

if 0 ≤ n 1 < N

(6.105)

if N ≤ n 1 ,

0

which seems to represent his state of knowledge tolerably well. The finite upper bound N is an admittedly ad hoc way of representing the fact that the laboratory is not being vaporized. How large could it be? If N were as large as 1060 , then not only the laboratory, but our entire galaxy, would be vaporized by the energy in the beam (indeed, the total number of atoms in our galaxy is of the order of 1060 ). So Mr A surely knows that N is very much less than that. Of course, if his final conclusions depend strongly on N , then Mr A will need to analyze his exact prior information and think more carefully about the value of N and whether the abrupt drop in p(n 1 |I A ) at n 1 = N should be smoothed out. Such careful thinking would not be wrong, but it turns out to be unnecessary, for it will soon be evident that details of p(n 1 |I A ) for large n 1 are irrelevant to Mr A’s conclusions.

6.14 On with the calculation! Nicely enough, the 1/N cancels out of (6.103) and (6.104), and we are left with p(n 1 |φc1 I A ) =

Ap(c1 |φn 1 ) 0

if 0 ≤ n 1 < N if N ≤ n 1 ,

(6.106)

where A is a normalization factor: A−1 =

N −1

p(c1 |φn 1 ).

(6.107)

n 1 =0

We have noted, in (6.100), that, as a function of n 1 , p(c1 |φn 1 ) attains its maximum at n 1 = c1 /φ (=100, in this problem). For n 1 φ c1 , p(c1 |φn 1 ) falls off like n c11 (1 − φ)n 1 n c11 exp{−n 1 φ}. Therefore, the sum (6.107) converges so rapidly that if N is as large as a few hundred, there is no appreciable difference between the exact normalization factor (6.107) and the sum to infinity. In view of this, we may as well take advantage of a simplification; after applying Bayes’ theorem, pass to the limit N → ∞. But let us be clear about the rationale of this; we pass to the limit, not because we believe that N is infinite; we know that it is not. We pass to the limit rather because we know that this will simplify the calculation without affecting the final result; after this passage to the limit, all our calculations pertaining to this model can be performed exactly with the aid of the general summation formula

d n 1 , mn x m = x dx (1 − x)a+1

∞ m+a m=0

m

(|x| < 1).

(6.108)

180

Part 1 Principles and elementary applications

Thus, writing m = n − c, we replace (6.107) by

∞ ∞ m+c 1 1 −1 c m c p(c1 |φn 1 ) = φ (1 − φ) = φ = . A (c+1) [1 − (1 − φ)] φ m n 1 =0 m=0 (6.109)

Exercise 6.6. To better appreciate the quality of this approximation, denote the ‘missing’ terms in (6.107) by S(N ) ≡

∞

p(c1 |φn 1 )

(6.110)

n 1 =N

and show that the fractional discrepancy between (6.107) and (6.109) is about δ ≡ S(N )/S(0)

exp{−N φ}(N φ)c1 , c1 !

if N φ 1 .

(6.111)

From this, show that in the present case (φ = 0.1, c1 = 10), unless the prior information can justify an upper limit N less than about 270, the exact value of N – or indeed, all details of p(n 1 |I A ) for n 1 > 270 – can make less than one part in 104 difference in Mr A’s conclusions. But it is hard to see how anyone could have any serious use for more than three figure accuracy in the final results; and so this discrepancy would have no effect at all on that final result. What happens for n 1 ≥ 340 can affect the conclusions less than one part in 106 , and for n 1 ≥ 400 it is less than one part in 108 .

This is typical of the way prior range matters in real problems, and it makes ferocious arguments over this seem rather silly. It is a valid question of principle, but its pragmatic consequences are not just negligibly small, but (usually) strictly nil because we are calculating only to a finite number of decimal places. Yet some writers have claimed that a fundamental qualitative change in the character of the problem occurs between N = 1010 and N = ∞. The reader may be amused to estimate how much difference this makes in the final numerical results. To how many decimal places would we need to calculate before it made any difference at all? Of course, if the prior information should start encroaching on the region n 1 < 270, it would then make a difference in the conclusions; but in that case the prior information was indeed cogent for the question being asked, and this is as it should be. Being thus reassured and using the approximation (6.109), we obtain the result

n 1 c1 +1 (1 − φ)n 1 −c1 . (6.112) φ p(n 1 |φc1 I A ) = φp(c1 |φn 1 ) = c1 So, for Mr A, the most probable value of n 1 is the same as the maximum likelihood estimate (nˆ 1 ) A =

c1 = 100, φ

(6.113)

6 Elementary parameter estimation

181

while the posterior mean value estimate is calculated as follows: n 1 A − c1 =

∞

(n 1 − c1 ) p(n 1 |φc1 I A )

n 1 =c1

= φ c1 +1 (1 − φ)(c1 + 1)

n1

n1 (1 − φ)n 1 −c1 −1 . n 1 − c1 − 1

From (6.108) the sum is equal to

∞ 1 m + c1 + 1 (1 − φ)m = 2+c , φ 1 m m=0

(6.114)

(6.115)

and we get n 1 A = c1 + (c1 + 1)

c1 + 1 − φ 1−φ = = 109. φ φ

(6.116)

Now, how about the other robot, Mr B? Does his extra knowledge help him here? He knows that there is some definite fixed source strength s. And, because the laboratory is not being vaporized, he knows that there is some upper limit S0 . Suppose that he assigns a uniform prior probability density for 0 ≤ s < S0 . Then he will obtain ∞ S0 S0 1 1 s n 1 exp{−s} . ds p(n 1 |s) p(s|θ I B ) = p(n 1 |s)ds = ds p(n 1 |θ I B ) = S0 0 S0 0 n1! 0 (6.117) Now, if n 1 is appreciably less than S0 , the upper limit of integration can for all practical purposes be taken as infinity, and the integral is just unity. So, we have p(n 1 |θ I B ) = p(s|θ I B ) =

1 = const., S0

n 1 < S0 .

(6.118)

In putting this into Bayes’ theorem with c1 = 10, the significant range of values of n 1 will be of the order of 100, and unless the prior information indicates a value of S0 lower than about 300, we will have the same situation as before; Mr B’s extra knowledge didn’t help him at all, and he comes out with the same posterior distribution and the same estimates: p(n 1 |c1 I B ) = p(n 1 |φc1 I A ) = φp(c1 |φn 1 ).

(6.119)

6.15 The Jeffreys prior Harold Jeffreys (1939, Chap. 3) proposed a different way of handling this problem. He suggests that the proper way to express ‘complete ignorance’ of a continuous variable known to be positive is to assign uniform prior probability to its logarithm; i.e. the prior probability density is p(s|I J ) ∝

1 , s

(0 ≤ s < ∞).

(6.120)

182

Part 1 Principles and elementary applications

Of course, we cannot normalize this, but that does not stop us from using it. In many cases, including the present one, it can be used directly because all the integrals involved converge. In almost all cases we can approach this prior as the limit of a sequence of proper (normalizable) priors, with mathematically well-behaved results. If even that does not yield a proper posterior distribution, then the robot is warning us that the data are too uninformative about either very large s or very small s to justify any definite conclusions, and we need to obtain more evidence before any useful inferences are possible. Jeffreys justified (6.120) on the grounds of invariance under certain changes of parameters; i.e. instead of using the parameter s, what prevents us from using t ≡ s 2 , or u ≡ s 3 ? Evidently, to assign a uniform prior probability density to s is not at all the same thing as assigning a uniform prior probability to t; but if we use the Jeffreys prior, we are saying the same thing whether we use s or any power s m as the parameter. There is the germ of an important principle here, but it was only recently that the situation has been fairly well understood. When we take up the theory of transformation groups in Chapter 12, we will see that the real justification of Jeffreys’ rule cannot lie merely in the fact that the parameter is positive, but that our desideratum of consistency, in the sense that equivalent states of knowledge should be represented by equivalent probability assignments, uniquely determines the Jeffreys rule in the case when s is a ‘scale parameter’. Then, marginalization theory will reinforce this by deriving it Uniquely – without appealing to any principles beyond the basic product and sum rules of probability theory – as the only prior for a scale parameter that is completely uninformative about other parameters that may be in the model. These arguments and others equally cogent all lead to the same conclusion: the Jeffreys prior is the only correct way to express complete ignorance of a scale parameter. The question then reduces to whether s can properly be regarded as a scale parameter in this problem. However, this line of thought has taken us beyond the present topic; in the spirit of our current problem, we shall just put (6.120) to the test and see what results it gives. The calculations are all very easy, and we find these results: p(n 1 |I J ) =

1 , n1

p(c1 |I J ) =

1 , c1

p(n 1 |φc1 I J ) =

c1 p(c1 |φn 1 ). n1

(6.121)

c = 100. φ

(6.122)

This leads to the most probable and mean value estimates: (nˆ 1 ) J =

c1 − 1 + φ = 91, φ

n 1 J =

The amusing thing emerges that Jeffreys’ prior probability rule just lowers the most probable and posterior mean value estimates by nine each, bringing the mean value right back to the maximum likelihood estimate! This comparison is valuable in showing us how little difference there is numerically between the consequences of different prior probability assignments which are not sharply peaked, and helps to put arguments about them into proper perspective. We made a rather drastic change in the prior probabilities, in a problem where there was really very little

6 Elementary parameter estimation

183

information contained in the meager data, and it still made less than 10% difference in the result. This is, as we shall see, small compared with the probable error in the estimate which was inevitable in any event. In a more realistic problem where we have more data, the difference would be even smaller. A useful rule of thumb, illustrated by the comparison of (6.113), (6.116) and (6.122), is that changing the prior probability p(α|I ) for a parameter by one power of α has in general about the same effect on our final conclusions as does having one more data point. This is √ because the likelihood function generally has a relative width 1/ n, and one more power of α merely adds an extra small slope in the neighborhood of the maximum, thus shifting the maximum slightly. Generally, if we have effectively n independent observations, then the √ fractional error in an estimate that was inevitable in any event is 1/ n, approximately,12 while the fractional change in the estimate due to one more power of α in the prior is about 1/n. In the present case, with ten counts, thus ten independent observations, changing from a uniform to Jeffreys prior made just under 10% difference. If we had 100 counts, the error which is inevitable in any event would be about 10%, while the difference from the two priors would be less than 1%. So, from a pragmatic standpoint, arguments about which prior probabilities correctly express a state of ‘complete ignorance’, like those over prior ranges, usually amount to quibbling over pretty small peanuts.13 From the standpoint of principle, however, they are important and need to be thought about a great deal, as we shall do in Chapter 12 after becoming familiar with the numerical situation. While the Jeffreys prior is the theoretically correct one, it is in practice a small refinement that makes a difference only in the very small sample case. In the past, these issues were argued back and forth endlessly on a foggy philosophical level, without taking any note of the pragmatic facts of actual performance; that is what we are trying to correct here.

6.16 The point of it all Now we are ready for the interesting part of this problem. For during the next second, we see c2 = 16 counts. What can Mr A and Mr B now say about the numbers n 1 , n 2 of particles responsible for c1 , c2 ? Well, Mr A has no reason to expect any relationship between what happened in the two time intervals, and so to him the increase in counting rate is evidence only of an increase in the number of incident particles. His calculation for the second time interval is the same as before, and he will give us the most probable value, (nˆ 2 ) A =

12 13

c2 = 160, φ

(6.123)

√ However, as we shall see later, there are two special cases where the 1/ n rule fails: if we are trying to estimate the location of a discontinuity in an otherwise continuous probability distribution, and if different data values are strongly correlated. This is most definitely not true if the prior probabilities are to describe a definite piece of prior knowledge, as the next example shows.

184

Part 1 Principles and elementary applications

and his mean value estimate, n 2 A =

c2 + 1 − φ = 169. φ

(6.124)

Knowledge of c2 doesn’t help him to make any improved estimate of n 1 , which stays the same as before. Mr B is in an entirely different position than Mr A; his extra qualitative information suddenly becomes very important. For knowledge of c2 enables him to improve his previous estimate of n 1 . Bayes’ theorem now gives p(n 1 |φc2 c1 I B ) = p(n 1 |φc1 I B )

p(c2 |φn 1 c1 I B ) p(c2 |φn 1 I B ) = p(n 1 |φc1 I B ) . p(c2 |φc1 I B ) p(c2 |φc1 I B )

(6.125)

Again, the denominator is a normalizing constant, which we can find by summing the numerator over n 1 . We see that the significant thing is p(c2 |φn 1 I B ). Using our method of resolving c2 into mutually exclusive alternatives, this is ∞ ds p(c2 s|φn 1 I B ) p(c2 |φn 1 I B ) = 0 ∞ (6.126) ds p(c2 |sφn 1 I B ) p(s|φn 1 I B ) = 0 ∞ ds p(c2 |φs I B ) p(s|φn 1 I B ). = 0

We have already found p(c2 |φs I B ) in (6.86), and we need only p(s|φn 1 I B ) = p(s|φ I B )

p(n 1 |φs I B ) = p(n 1 |φs), p(n 1 |φ I B )

if n 1 S0 ,

(6.127)

where we have used (6.118). We have found p(n 1 |s) in (6.84), so we have

∞ exp{−sφ}(sφ)c2 exp{−s}s n 1 φ c2 n 1 + c2 ds . = p(c2 |φn 1 I B ) = c2 c2 ! n1! (1 + φ)n 1 +c2 +1 0 (6.128) Substituting (6.119) and (6.128) into (6.125) and carrying out an easy summation to get the denominator, the result is (not a binomial distribution):

n 1 + c2 2φ c1 +c2 +1 1 − φ n 1 −c1 . (6.129) p(n 1 |φc2 c1 I B ) = c1 + c2 1+φ 1+φ Note that we could have derived this equally well by direct application of the resolution method: ∞ ds p(n 1 s|φc2 c1 I B ) p(n 1 |φc2 c1 I B ) = 0 ∞ (6.130) ds p(n 1 |φsc2 c1 I B ) p(s|φc2 c1 I B ) = 0 ∞ ds p(n 1 |φsc1 I B ) p(s|φc2 c1 I B ). = 0

6 Elementary parameter estimation

185

We have already found p(n 1 |φsc1 I B ) in (6.89), and it is easily shown that p(s|φc2 c1 I B ) ∝ p(c2 |φs I B ) p(c1 |φs I B ), which is therefore given by the Poisson distribution (6.86). This, of course, leads to the same rather complicated result (6.129); thus providing another – and rather severe – test of the consistency of our rules. To find Mr B’s new most probable value of n 1 , we set n 1 + c2 1 − φ p(n 1 |φc2 c1 I B ) = = 1, p(n 1 − 1|φc2 c1 I B ) n 1 − c1 1 + φ

(6.131)

c1 + c2 c1 − c2 c1 1−φ + (c2 − c1 ) = + = 127. φ 2φ 2φ 2

(6.132)

or (nˆ 1 ) B =

His new posterior mean value is also readily calculated, and is equal to c1 + c2 + 1 − φ c1 − c2 c1 + 1 − φ 1−φ + (c2 − c1 − 1) = + = 131.5. φ 2φ 2φ 2 (6.133) Both estimates are considerably raised, and the difference between most probable and mean value is only half what it was before, suggesting a narrower posterior distribution, as we shall confirm presently. If we want Mr B’s estimates for n 2 , then from symmetry we just interchange the subscripts 1 and 2 in the above equations. This gives for his most probable and mean value estimates, respectively, n 1 B =

(nˆ 2 ) B = 133,

n 2 B = 137.5.

(6.134)

Now, can we understand what is happening here? Intuitively, the reason why Mr B’s extra qualitative prior information makes a difference is that knowledge of both c1 and c2 enables him to make a better estimate of the source strength s, which in turn is relevant for estimating n 1 . The situation is indicated more clearly by the diagrams in Figure 6.2. By hypothesis, to Mr A each sequence of events n i → ci is logically independent of the others, so knowledge of one doesn’t help him in reasoning about any other. In each case he must reason from ci directly to n i , and no other route is available. But to Mr B, there are two routes available: he can reason directly from c1 to n 1 as Mr A does, as described by p(n 1 |φc1 I A ) = p(n 1 |φc1 I B ); but, because of his knowledge that there is a fixed source strength s ‘presiding over’ both n 1 and n 2 , he can also reason along the route c2 → n 2 → s → n 1 . If this were the only route available to him (i.e. if he didn’t know c1 ), he would obtain the distribution ∞ φ c2 +1 (n 1 + c2 )! p(n 1 |φc2 I B ) = ds p(n 1 |s) p(s|c2 I B ) = , (6.135) c2 +1 n !(1 + φ)n 1 c !(1 + φ) 2 1 0 and, comparing the above relations, we see that Mr B’s final distribution (6.129) is, except for normalization, just the product of the ones found by reasoning along his two routes: p(n 1 |φc1 c2 I B ) = (const.) × p(n 1 |φc1 I B ) p(n 1 |φc2 I B )

(6.136)

in consequence of the fact that p(c1 c2 |φn 1 ) = p(c1 |φn 1 ) p(c2 |φn 1 ). The information (6.135) about n 1 obtained by reasoning along the new route c2 → n 2 → s → n 1 thus introduces

186

Part 1 Principles and elementary applications

a ‘correction factor’ in the distribution obtained from the direct route c1 → n 1 , enabling Mr B to improve his estimates. This suggests that, if Mr B could obtain the number of counts in a great many different seconds, (c3 , c4 , . . . , cm ), he would be able to do better and better; and perhaps in the limit m → ∞ his estimate of n 1 might be as good as the one we found when the source strength was known exactly. We will check this surmise presently by working out the degree of reliability of these estimates, and by generalizing these distributions to arbitrary m, from which we can obtain the asymptotic forms.

6.17 Interval estimation There is still an essential feature missing in the comparison of Mr A and Mr B in our particle counter problem. We would like to have some measure of the degree of reliability which they attach to their estimates, especially in view of the fact that their estimates are so different. Clearly, the best way of doing this would be to draw the entire probability distributions p(n 1 |φc2 c1 I A )

p(n 1 |φc2 c1 I B )

and

(6.137)

and from this make statements of the form, ‘90% of the posterior probability is concentrated in the interval α < n 1 < β’. But, for present purposes, we will be content to give the standard deviations (i.e., square root of the variance as defined in Eq. (6.93)) of the various distributions we have found. An inequality due to Tchebycheff then asserts that, if σ is the standard deviation of any probability distribution over n 1 , then the amount P of probability concentrated between the limits n 1 ± tσ satisfies14 P ≥1−

1 . t2

(6.139)

This tells us nothing when t ≤ 1, but it tells us more and more as t increases beyond unity. For example, in any probability distribution with finite n and n 2 , at least 3/4 of the probability is contained in the interval n ± 2σ , and at least 8/9 is in n ± 3σ .

6.18 Calculation of variance The variances σ 2 of all the distributions we have found above are readily calculated. In fact, calculation of any moment of these distributions is easily performed by the general formula (6.108). For Mr A and Mr B, and the Jeffreys prior probability distribution, we 14

Proof: Let p(x) be a probability density over (−∞ < x < ∞), a any real number, and y ≡ x − x. Then ∞ dx p(x) ≤ dx y 2 p(x) ≤ dx y 2 p(x) = σ 2 . a 2 (1 − P) = a 2 p(|y| > a) = a 2 |y|>a

|y|>a

(6.138)

−∞

Writing a = tσ , this is t 2 (1 − P) ≤ 1, the same as Eq. (6.139). This proof includes the discrete cases, since then p(x) is a sum of delta-functions. A large collection of useful Tchebycheff-type inequalities is given by I. R. Savage (1961).

6 Elementary parameter estimation

187

Table 6.1. The effect of prior information on estimates of n 1 and n 2 . Problem 1

A B Jeffreys

most probable mean ± s.d. most probable mean ± s.d. most probable mean ± s.d.

Problem 2

n1

n1

n2

100 109 ± 31 100 109 ± 31 91 100 ± 30

100 109 ± 31 127 131.5 ± 25.9 121.5 127 ± 25.4

160 169 ± 39 133 137.5 ± 25.9 127.5 133 ± 25.4

find the variances var(n 1 |φc1 I A ) =

var(n 1 |φc2 c1 I B ) =

(c1 + 1)(1 − φ) , φ2

(c1 + c2 + 1)(1 − φ 2 ) , 4φ 2

var(n 1 |φc1 I J ) =

c1 (1 − φ) , φ2

(6.140)

(6.141)

(6.142)

and the variances for n 2 are found from symmetry. This has been a rather long discussion, so let’s summarize all our results so far in Table 6.1. We give, for problem 1 (c1 = 10) and problem 2 (c1 = 10, c2 = 16), the most probable values of the number of particles found by Mr A and Mr B, and also the (mean value) ± (standard deviation) estimates. From Table 6.1 we see that Mr B’s extra information not only has led him to change his estimates considerably from those of Mr A, but it has enabled him to make an appreciable decrease in his probable error. Even purely qualitative prior information which has nothing to do with frequencies can greatly alter the conclusions we draw from a given data set. Now, in virtually every real problem of scientific inference, we do have qualitative prior information of more or less the kind supposed here. Therefore, any method of inference which fails to take prior information into account is capable of misleading us, in a potentially dangerous way. The fact that it yields a reasonable result in one problem is no guarantee that it will do so in the next. It is also of interest to ask how good Mr B’s estimate of n 1 would be if he knew only c2 ; and therefore had to use the distribution (6.135) representing reasoning along the route c2 → n 2 → s → n 1 of Figure 6.2. From (6.135) we find the most probable, and the (mean) ± (standard deviation) estimates nˆ 1 =

c2 = 160, φ

(6.143)

188

Part 1 Principles and elementary applications

mean ± s.d. =

c2 + 1 ± φ

√ (c2 + 1)(φ + 1) = 170 ± 43.3. φ

(6.144)

In this case, he would obtain a slightly poorer estimate (i.e. a larger probable error) than Mr A even if the counts c1 = c2 were the same, because the variance (6.140) for the direct route contains a factor (1 − φ), which gets replaced by (1 + φ) if we have to reason over the indirect route. Thus, if the counter has low efficiency, the two routes give nearly equal reliability for equal counting rates; but if it has high efficiency, φ 1, then the direct route c1 → n 1 is far more reliable. Our common sense will tell us that this is just as it should be. 6.19 Generalization and asymptotic forms We conjectured above that Mr B might be helped a good deal more in his estimate of n 1 by acquiring still more data {c3 , c4 , . . . , cm }. Let’s investigate that further. The standard deviation of the distribution (6.89) in which the source strength was known exactly is √ only s(1 − φ) = 10.8 for s = 130; and from Table 6.1 Mr B’s standard deviation for his estimate of n 1 is now about 2.5 times this value. What would happen if we gave him more and more data from other time intervals, such that his estimate of s approached 130? To answer this, note that, if 1 ≤ k ≤ m, we have: ∞ ds p(n k s|φc1 · · · cm I B ) p(n k |φc1 · · · cm I B ) = 0 ∞ (6.145) ds p(n k |φsck I B ) p(s|φc1 · · · cm I B ), = 0

in which we have put p(n k |φsc1 · · · cm I B ) = p(n k |φsck I B ) because, from Figure 6.2, if s is known, then all the ci with i = k are irrelevant for inferences about n k . The second factor in the integrand of (6.145) can be evaluated by Bayes’ theorem: p(c1 · · · cm |φs I B ) p(c1 · · · cm |φ I B ) = (const.) × p(s|φ I B ) p(c1 |φs I B ) · · · p(cm |φs I B ).

p(s|φc1 · · · cm I B ) = p(s|φ I B )

(6.146)

Using (6.86) and normalizing, this reduces to p(s|φc1 · · · cm I B ) =

(mφ)c+1 c s exp{−msφ}, c!

(6.147)

where c ≡ c1 + · · · + cm is the total number of counts in the m seconds. The mode, mean and variance of the distribution (6.147) are, respectively, sˆ =

c , mφ

s =

c+1 , mφ

var(s) = s 2 − s2 =

c+1 s . = 2 2 m φ mφ

(6.148)

So it turns out, as we might have expected, that as m → ∞, the distribution p(s|c1 · · · cm ) becomes sharper and sharper, the most probable and mean value estimates of s get closer

6 Elementary parameter estimation

189

and closer together, and it appears that in the limit we would have just a delta-function: p(s|φc1 · · · cm I B ) → δ(s − s ),

(6.149)

c1 + c2 + · · · + cm . mφ

(6.150)

where s ≡ lim

m→∞

But the limiting form (6.149) was found a bit abruptly, as was James Bernoulli’s first limit theorem. We might like to see in more detail how the limit is approached, in analogy to the de Moivre–Laplace limit theorem for the binomial (5.10), or the limit (4.72) of the beta distribution. For example, expanding the logarithm of (6.147) about its peak sˆ = c/mφ, and retaining only through the quadratic terms, we find for the asymptotic formula a Gaussian distribution: c(s − sˆ )2 , (6.151) p(s|φc1 · · · cm I B ) → A exp − 2ˆs 2 which is actually valid for all s, in the sense that the difference between the left-hand side and right-hand side is small for all s (although their ratio is not close to unity for all s). This leads to the estimate, as c → ∞,

1 (6.152) (s)est = sˆ 1 ± √ . c Quite generally, posterior distributions go into a Gaussian form as the data increase, because any function with a single rounded maximum, raised to a higher and higher power, goes into a Gaussian function. In the next chapter we shall explore the basis of Gaussian distributions in some depth. So, in the limit, Mr B does indeed approach exact knowledge of the source strength. Returning to (6.145), both factors in the integrand are now known from (6.89) and (6.147), and so ∞ exp{−s(1 − φ)}[s(1 − φ)]n k −ck (mφ)c+1 c s exp{−msφ}, ds p(n k |φc1 · · · cm I B ) = (n k − ck )! c! 0 (6.153) or p(n k |c1 · · · cm I B ) =

(n k − ck + c)! (mφ)c+1 (1 − φ)n k −ck , (n k − ck )!c! (1 + mφ − φ)n k −ck +c+1

(6.154)

which is the promised generalization of (6.135). In the limit m → ∞, c → ∞, (c/mφ) → s = const., this goes into the Poisson distribution p(n k |c1 · · · cm I B ) →

exp{−s (1 − φ)} [s (1 − φ)]n k −ck , (n k − ck )!

(6.155)

which is identical to (6.89). We therefore confirm that, given enough additional data, Mr B’s standard deviation can be reduced from 26 to 10.8, compared with Mr A’s value of 31. For

190

Part 1 Principles and elementary applications

finite m, the mean value estimate of n k from (6.154) is n k = ck + s(1 − φ),

(6.156)

where s = (c + 1)/mφ is the mean value estimate of s from (6.148). Equation (6.156) is to be compared with (6.90). Likewise, the most probable value of n k , according to (6.154), is nˆ k = ck + sˆ (1 − φ),

(6.157)

where sˆ is given by (6.148). Note that Mr B’s revised estimates in problem 2 still lie within the range of reasonable error assigned by Mr A. It would be rather disconcerting if this were not the case, as it would then appear that probability theory is giving Mr A an over-optimistic picture of the reliability of his estimates. There is, however, no theorem which guarantees this; for example, if the counting rate had jumped to c2 = 80, then Mr B’s revised estimate of n 1 would be far outside Mr A’s limits of reasonable error. But, in this case, Mr B’s common sense would lead him to doubt the reliability of his prior information I B ; we would have another example like that in Chapter 4, of a problem where one of those ‘something else’ alternative hypotheses down at −100 db, which we don’t even bother to formulate until they are needed, is resurrected by very unexpected new evidence. Exercise 6.7. The above results were found using the language of the particle counter scenario. Summarize the final conclusions in the language of the disease incidence scenario, as one or two paragraphs of advice for a medical researcher who is trying to judge whether public health measures are reducing the incidence of a disease in the general population, but has data only on the number of deaths from it. This should, of course, include something about judging under what conditions our model corresponds well to the real world; and what to do if it does not. Now we turn to a different kind of problem to see some new features that can appear when we use a sampling distribution that is continuous except at isolated points of discontinuity. 6.20 Rectangular sampling distribution The following ‘taxicab problem’ has been part of the orally transmitted folklore of this field for several decades, but orthodoxy has no way of dealing with it, and we have never seen it mentioned in the orthodox literature. You are traveling on a night train; on awakening from sleep, you notice that the train is stopped at some unknown town, and all you can see is a taxicab with the number 27 on it. What is then your guess as to the number N of taxicabs in the town, which would in turn give a clue as to the size of the town? Almost everybody answers intuitively that there seems to be something about the choice Nest = 2 × 27 = 54 that recommends itself; but few can offer a convincing rationale for this. The obvious ‘model’ that forms in our minds is that there will be N taxicabs, numbered, respectively,

6 Elementary parameter estimation

191

(1, . . . , N ), and, given N , the one we see is equally likely to be any of them. Given that model, we would then know deductively that N ≥ 27; but, from that point on, our reasoning depends on our statistical indoctrination. Here we study a continuous version of the same problem, in which more than one taxi may be in view, leaving it as an exercise for the reader to write down the parallel solution to the above taxicab problem, and then state the exact relationship between the continuous and discrete problems. We consider a rectangular sampling distribution in [0, α], where the width α of the distribution is the parameter to be estimated, and finally suggest further exercises which will extend what we learn from it. We have a data set D ≡ {x1 , . . . , xn } of n observations thought of as ‘drawn from’ this distribution, urn-wise; that is, each datum xi is assigned independently the pdf −1 if 0 ≤ xi ≤ α < ∞ α (6.158) p(xi |α I ) = 0 otherwise. Then our entire sampling distribution is p(xi |α I ) = α −n , p(D|α I ) =

0 ≤ {x1 , . . . , xn } ≤ α,

(6.159)

i

where for brevity we suppose, in the rest of this section, that when the inequalities following an equation are not all satisfied, the left-hand side is zero. It might seem at first glance that this situation is too trivial to be worth analyzing; yet, if one does not see in advance exactly how every detail of the solution will work itself out, there is always something to be learned from studying it. In probability theory, the most trivial looking problems reveal deep and unexpected things. The posterior pdf for α is, by Bayes’ theorem, p(α|D I ) = p(α|I )

p(D|α I ) , p(D|I )

(6.160)

where p(α|I ) is our prior. Now it is evident that any Bayesian problem with a proper (normalizable) prior and a bounded likelihood function must lead to a proper, well-behaved posterior distribution, whatever the data – as long as the data do not themselves contradict any of our other information. If any datum was found to be negative, xi < 0, the model (6.159) would be known deductively to be wrong (put better, the data contradict the prior information I that led us to choose that model). Then the robot crashes, both (6.159) and (6.160) vanishing identically. But any data set for which the inequalities in (6.159) are satisfied is a possible one according to the model. Must it then yield a reasonable posterior pdf? Not necessarily! The data could be compatible with the model, but still incompatible with the other prior information. Consider a proper rectangular prior p(α|I ) = (α1 − α00 )−1 ,

α00 ≤ α ≤ α1 ,

(6.161)

where α00 , α1 are fixed numbers satisfying 0 ≤ α00 ≤ α1 < ∞, given to us in the statement of the problem. If any datum were found to exceed the upper prior bound: xi > α1 , then the data and the prior information would again be logically contradictory.

192

Part 1 Principles and elementary applications

But this is just what we anticipated already in Chapters 1 and 2; we are trying to reason from two pieces of information D, I , each of which may be actually a logical conjunction of many different propositions. If there is a contradiction hidden anywhere in the totality of this, there can be no solution (in a set theory context, the set of possibilities that we have prescribed is the empty set) and the robot crashes, in one way or another. So in the following we suppose that the data are consistent with all the prior information – including the prior information that led us to choose this model.15 Then the above rules should yield the correct and exact answer to the question we have posed. The denominator of (6.160) is dα (α1 − α00 )−1 α −n , (6.162) p(D|I ) = R

where the region R of integration must satisfy two conditions: α00 ≤ α ≤ α1 R≡ xmax ≤ α ≤ α1

(6.163)

and xmax ≡ max{x1 , . . . , xn } is the greatest datum observed. If xmax ≤ α00 , then in (6.163) we need only the former condition; the numerical values of the data xi are entirely irrelevant (although the number n of observations remains relevant). If α00 ≤ xmax , then we need only the latter inequality; the prior lower bound α00 has been superseded by the data, and is irrelevant to the problem from this point on. Substituting (6.159), (6.161) and (6.162) into (6.160), the factor (α1 − α00 ) cancels out, and if n > 1 our general solution reduces to p(α|D I ) =

(n − 1)α −n α01−n − α11−n

,

α0 ≤ α ≤ α1 ,

n > 1,

(6.164)

where α0 ≡ max(α00 , xmax ).

6.21 Small samples Small values of n often present special situations that might be overlooked in a general derivation. In orthodox statistics, as we shall see in Chapter 17, they can lead to weird pathological results (like an estimator for a parameter which lies outside the parameter space, and so is known deductively to be impossible). In any other area of mathematics, when a contradiction like this appears, one concludes at once that an error has been made. But curiously, in the literature of orthodox statistics, such pathologies are never interpreted as revealing an error in the orthodox reasoning. Instead they are simply passed over; one proclaims his concern only with large n. But small n proves to be very interesting for us, just 15

Of course, in the real world we seldom have prior information that would justify such sharp bounds on x and α, and so such sharp contradictions would not arise; but that signifies only that we are studying an ideal limiting case. There is nothing strange about this; in elementary geometry, our attention is directed first to such things as perfect triangles and circles, although no such things exist in the real world. There, also, we are really studying ideal limiting cases of reality; but what we learn from that study enables us to deal successfully with thousands of real situations that arise in such diverse fields as architecture, engineering, astronomy, geodesy, stereochemistry, and the artist’s rules of perspective. It is the same here.

6 Elementary parameter estimation

193

because of the fact that Bayesian analysis has no pathological, exceptional cases. As long as we avoid outright logical contradictions in the statement of a problem and use proper priors, the solutions do not break down but continue to make good sense. It is very instructive to see how Bayesian analysis always manages to accomplish this, which also makes us aware of a subtle point in practical calculation. Thus, in the present case, if n = 1, then (6.164) appears indeterminate, reducing to (0/0). But if we repeat the derivation from the start for the case n = 1, the properly normalized posterior pdf for α is found to be, instead of (6.164), p(α|D I ) =

α −1 , log(α1 /α0 )

α0 ≤ α ≤ α1 ,

n = 1.

(6.165)

The case n = 0 can hardly be of any use; nevertheless, Bayes’ theorem still gives the obviously right answer. For then D = ‘no data at all’, and p(D|α I ) = p(D|I ) = 1; that is, if we take no data, we shall have no data, whatever the value of α. Then the posterior distribution (6.160) reduces, as common sense demands, to the prior distribution p(α|D I ) = p(α|I ),

α0 ≤ α ≤ α1 ,

n = 0.

(6.166)

6.22 Mathematical trickery Now we see a subtle point: the last two results are contained already in (6.164) without any need to go back and repeat the derivation from the start. We need to understand the distinction between the real world problem and the abstract mathematics. Although in the real problem n is by definition a non-negative integer, the mathematical expression (6.164) is well-defined and meaningful when n is any complex number. Furthermore, as long as α1 < ∞, it is an entire function of n (that is, bounded and analytic everywhere except the point at infinity). Now in a purely mathematical derivation we are free to make use of whatever analytical properties our functions have, whether or not they would make sense in the real problem. Therefore, since (6.164) can have no singularity at any finite point, we may evaluate it at n = 1 by taking the limit as n → 1. But n−1 α01−n

−

α11−n

= = →

n−1 exp{−(n − 1) log(α0 )} − exp{−(n − 1) log(α1 )} n−1 (6.167) [1 − (n − 1) log(α0 ) + · · ·] − [1 − (n − 1) log(α1 ) + · · ·] 1 , log(α1 /α0 )

leading to (6.165). Likewise, putting n = 0 into (6.164), it reduces to (6.166), because now we have necessarily α0 = α00 . Even in extreme, degenerate cases, Bayesian analysis continues to yield the correct results.16 And it is evident that all moments and percentiles of 16

Under the influence of early orthodox teaching, the writer became fully convinced of this only after many years of experimentation with hundreds of such cases, and his total failure to produce any pathology as long as the Chapter 2 rules were followed strictly.

194

Part 1 Principles and elementary applications

the posterior distribution are also entire functions of n, so they may be calculated once and for all for all n, taking limiting values whenever the general expression reduces to (0/0) or (∞/∞); this will always yield the same result that we obtain by going back to the beginning and repeating the calculation for that particular n value.17 If α1 < ∞, the posterior distribution is confined to a finite interval, and so it has necessarily moments of all orders. In fact, α1 n−1 n − 1 α01+m−n − α11+m−n m−n dα α = , (6.168) α m = 1−n n − m − 1 α01−n − α11−n α0 − α11−n α0 and when n → 1 or m → n − 1, we are to take the limit of this expression in the manner of (6.167), yielding the more explicit forms: α1m − α0m if n = 1 m log(α1 /α0 ) m (6.169) α = (n − 1) log(α1 /α0 ) if m = n − 1. α01−n − a11−n In the above results, the posterior distribution is confined to a finite region (a0 ≤ α ≤ α1 ) and there can be no singular result.

Exercise 6.8. Complete this example, finding explicit values for the estimates of α and their accuracy. Discuss how these results correspond or fail to correspond to common sense judgments.

Finally, we leave it as an exercise for the reader to consider what happens as α1 → ∞ and we pass to an infinite domain.

Exercise 6.9. When α1 → ∞, some moments must cease to exist, so some inferences must cease to be possible; others remain possible. Examine the above equations to find under what conditions a posterior (mean ± standard deviation) or (median ± interquartile span) remains possible, considering in particular the case of small n. State how the results correspond to common sense.

17

Recognizing this, we see that, whenever a mathematical expression is an analytic function of some parameter, we can exploit that fact as a tool for calculation with it, whatever meaning it might have in the original problem. For example, the numbers 2 and π often appear, and it is often in an expression Q(2) or Q(π) which is an analytic function of the symbol ‘2’ or ‘π’. Then, if it is helpful, we are free to replace ‘2’ or ‘π’ by ‘x’ and evaluate quantities involving Q by such operations as differentiating with respect to x, or complex integration in the x plane, etc., setting x = 2 or x = π at the end; and this is perfectly rigorous. Once we have distilled the real problem into one of abstract mathematics, our symbols mean whatever we say they mean; the writer learned this trick from Professor W. W. Hansen of Stanford University, who would throw a class into an uproar when he evaluated an integral, correctly, by differentiating another integral with respect to π .

6 Elementary parameter estimation

195

6.23 Comments The calculations which we have done here with ease – in particular, (6.129) and (6.152) – cannot be done with any version of probability theory which does not permit the use of the prior and posterior probabilities needed, and consequently does not allow us to integrate out a nuisance parameter with respect to a prior. It appears to us that Mr B’s results are beyond the reach of orthodox methods. Yet at every stage, probability theory as logic has followed the procedures that are determined uniquely by the basic product and sum rules of probability theory; and it has yielded well-behaved, reasonable, and useful results. In some cases, the prior information was absolutely essential, even though it was only qualitative. Later we shall see even more striking examples of this. It should not be supposed that this recognition of the need to use prior information is a new discovery. It was emphasized very strongly by Bertrand (1889); he gave several examples, of which we quote the last (he wrote in very short paragraphs): The inhabitants of St. Malo [a small French town on the English channel] are convinced; for a century, in their village, the number of deaths at the time of high tide has been greater than at low tide. We admit the fact. On the coast of the English channel there have been more shipwrecks when the wind was from the northwest than for any other direction. The number of instances being supposed the same and equally reliably reported, still one will not draw the same conclusions. While we would be led to accept as a certainty the influence of the wind on shipwrecks, common sense demands more evidence before considering it even plausible that the tide influences the last hour of the Malouins. The problems, again, are identical; the impossibility of accepting the same conclusions shows the necessity of taking into account the prior probability for the cause.

Clearly, Bertrand cannot be counted among those who advocate R. A. Fisher’s maxim: ‘Let the data speak for themselves!’ which has so dominated statistics in this century. The data cannot speak for themselves; and they never have, in any real problem of inference. For example, Fisher advocated the method of maximum likelihood for estimating a parameter; in a sense, this is the value that is indicated most strongly by the data alone. But that takes note of only one of the factors that probability theory (and common sense) requires. For, if we do not supplement the maximum likelihood method with some prior information about which hypotheses we shall consider reasonable, then it will always lead us inexorably to favor the ‘sure thing’ hypothesis HS , according to which every tiny detail of the data was inevitable; nothing else could possibly have happened. For the data always have a much higher probability (namely p(D|HS ) = 1), on HS than on any other hypothesis; HS is always the maximum likelihood solution over the class of all hypotheses. Only our extremely low prior probability for HS can justify our rejecting it.18 18

Small children, when asked to account for some observed fact such as the exact shape of a puddle of spilled milk, have a strong tendency to invent ‘sure thing’ hypotheses; they have not yet acquired the worldly experience that makes educated adults consider them too unlikely to be considered seriously. But a scientist, who knows that the shape is determined by the laws of hydrodynamics and has vast computing power available, is no more able than the child to predict that shape, because he lacks the requisite prior information about the exact initial conditions.

196

Part 1 Principles and elementary applications

Orthodox practice deals with this in part by the device of specifying a model, which is, of course, a means of incorporating some prior information about the phenomenon being observed. But this is incomplete, defining only the parameter space within which we shall seek that maximum; without a prior probability over that parameter space, we have no way of incorporating further prior information about the likely values of the parameter, which we almost always have and which is often highly cogent for any rational inference. For example, although a parameter space may extend formally to infinity, in virtually every real problem we know in advance that the parameter is enormously unlikely to be outside some finite domain. This information may or may not be crucial, depending on what data set we happen to get. As the writer can testify from his student days, steadfast followers of Fisher often interpret ‘Let the data speak for themselves’ as implying that it is reprehensible – a violation of ‘scientific objectivity’ – to allow one’s self to be influenced at all by prior information. It required a few years of experience to perceive, with Bertrand, what a disastrous error this is in real problems. Fisher was able to manage without mentioning prior information only because, in the problems he chose to work on, he had no very important prior information anyway, and plenty of data. Had he worked on problems with cogent prior information and sparse data, we think that his ideology would have changed rather quickly. Scientists in all fields see this readily enough – as long as they rely on their own common sense instead of orthodox teaching. For example, Stephen J. Gould (1989) describes the bewildering variety of soft-bodied animals that lived in early Cambrian times, preserved perfectly in the famous Burgess shale of the Canadian Rockies. Two paleontologists examined the same fossil, named Aysheaia, and arrived at opposite conclusions regarding its proper taxonomic classification. One who followed Fisher’s maxim would be obliged to question the competence of one of them; but Gould does not make this error. He concludes (p. 172), ‘We have a reasonably well-controlled psychological experiment here. The data had not changed, so the reversal of opinion can only record a revised presupposition about the most likely status of Burgess organisms.’ Prior information is essential also for a different reason, if we are trying to make inferences concerning which mechanism is at work. Fisher would, presumably, insist as strongly as any other scientist that a cause–effect relationship requires a physical mechanism to bring it about. But as in St Malo, the data alone are silent on this; they do not speak for themselves.19 Only prior information can tell us whether some hypothesis provides a possible mechanism for the observed facts, consistent with the known laws of physics. If it does not, then the fact that it accounts well for the data may give it a high likelihood, but cannot give it any credence. A fantasy that invokes the labors of hordes of little invisible elves and pixies running about to generate the data would have just as high a likelihood; but it would still have no credence for a scientist. 19

Statisticians, even those who profess themselves disciples of Fisher, have been obliged to develop adages about this, such as ‘correlation does not imply causation’. or ‘a good fit is no substitute for a reason’. to discourage the kind of thinking that comes automatically to small children, and to adults with untrained minds.

6 Elementary parameter estimation

197

It is not only orthodox statisticians who have denigrated prior information in the 20th century. The fantasy writer H. P. Lovecraft once defined ‘common sense’ as ‘merely a stupid absence of imagination and mental flexibility’. Indeed, it is just the accumulation of unchanging prior information about the world that gives the mature person the mental stability that rejects arbitrary fantasies (although we may enjoy diversionary reading of them). Today, the question whether our present information does or does not provide credible evidence for the existence of a causal effect is a major policy issue, arousing bitter political, commercial, medical, and environmental contention, resounding in courtrooms and legislative halls.20 Yet cogent prior information – without which the issue cannot possibly be judged – plays little role in the testimony of ‘expert witnesses’ with orthodox statistical training, because their standard procedures have no place to use it. We note that Bertrand’s clear and correct insight into this appeared the year before Fisher was born; the progress of scientific inference has not always been forward. Thus, this chapter begins and ends with a glance back at Fisher, about whom the reader may find more in Chapter 16. 20

For some frightening examples, see Gardner (1957, 1981). Deliberate suppression of inconvenient prior information is also the main tool of the scientific charlatans.

7 The central, Gaussian or normal distribution

My own impression . . . is that the mathematical results have outrun their interpretation and that some simple explanation of the force and meaning of the celebrated integral . . . will one day be found . . . which will at once render useless all the works hitherto written. Augustus de Morgan (1838) Here, de Morgan was expressing his bewilderment at the ‘curiously ubiquitous’ success of methods of inference based on the Gaussian, or normal, ‘error law’ (sampling distribution), even in cases where the law is not at all plausible as a statement of the actual frequencies of the errors. But the explanation was not forthcoming as quickly as he expected. In the middle 1950s the writer heard an after-dinner speech by Professor Willy Feller, in which he roundly denounced the practice of using Gaussian probability distributions for errors, on the grounds that the frequency distributions of real errors are almost never Gaussian. Yet in spite of Feller’s disapproval, we continued to use them, and their ubiquitous success in parameter estimation continued. So, 145 years after de Morgan’s remark, the situation was still unchanged, and the same surprise was expressed by George Barnard (1983): ‘Why have we for so long managed with normality assumptions?’ Today we believe that we can, at last, explain (1) the inevitably ubiquitous use, and (2) the ubiquitous success, of the Gaussian error law. Once seen, the explanation is indeed trivially obvious; yet, to the best of our knowledge, it is not recognized in any of the previous literature of the field, because of the universal tendency to think of probability distributions in terms of frequencies. We cannot understand what is happening until we learn to think of probability distributions in terms of their demonstrable information content instead of their imagined (and, as we shall see, irrelevant) frequency connections. A simple explanation of these properties – stripped of past irrelevancies – has been achieved only very recently, and this development changed our plans for the present work. We decided that it is so important that it should be inserted at this somewhat early point in the narrative, even though we must then appeal to some results that are established only later. In the present chapter, then, we survey the historical basis of Gaussian distributions and present a quick preliminary understanding of their functional role in inference. This understanding will then guide us directly – without the usual false starts and blind 198

7 The central, Gaussian or normal distribution

199

alleys – to the computational procedures which yield the great majority of the useful applications of probability theory.

7.1 The gravitating phenomenon We have noted an interesting phenomenon several times in previous chapters; in probability theory, there seems to be a central, universal distribution 2 x 1 ϕ(x) ≡ √ exp − 2 2π

(7.1)

toward which all others gravitate under a very wide variety of different operations – and which, once attained, remains stable under an even wider variety of operations. The famous ‘central limit theorem’ concerns one special case of this. In Chapter 4, we noted that a binomial or beta sampling distribution goes asymptotically into a Gaussian when the number of trials becomes large. In Chapter 6 we noted a virtually universal property, that posterior distributions for parameters go into Gaussian when the number of data values increases. In physics, these gravitating and stability properties have made this distribution the universal basis of kinetic theory and statistical mechanics; in biology, it is the natural tool for discussing population dynamics in ecology and evolution. We cannot doubt that it will become equally fundamental in economics, where it already enjoys ubiquitous use, but somewhat apologetically, as if there were some doubt about its justification. We hope to assist this development by showing that its range of validity for such applications is far wider than is usually supposed. Figure 7.1 illustrates this distribution. Its general shape is presumably already well known to the reader, although the numerical values attached to it may not be. The cumulative

0.5

↓

ϕ

0.3 0.2

−3

−2

−1

0

t

↓

0.1

1

√

3

2

Fig. 7.1. The central, Gaussian or normal distribution: ϕ(t) = 1/ 2π exp(−t /2). 2

200

Part I Principles and elementary applications

Gaussian, defined as (x) ≡ = =

x

−∞ 0 −∞

dt ϕ(t), dt ϕ(t), +

x

dt ϕ(t),

(7.2)

0

1 [1 + erf(x)] , 2

will be used later in this chapter for solving some problems. Numerical values for this function are easily calculated using the error function, erf(x). This distribution is called the Gaussian, or normal, distribution, for historical reasons discussed below. Both names are inappropriate and misleading today; all the correct connotations would be conveyed if we called it, simply, the central distribution of probability theory.1 We consider first three derivations of it that were important historically and conceptually, because they made us aware of three important properties of the Gaussian distribution.

7.2 The Herschel–Maxwell derivation One of the most interesting derivations, from the standpoint of economy of assumptions, was given by the astronomer John Herschel (1850). He considered the two-dimensional probability distribution for errors in measuring the position of a star. Let x be the error in the longitudinal (east–west) direction and y the error in the declination (north– south) direction, and ask for the joint probability distribution ρ(x, y). Herschel made two postulates (P1, P2) that seemed required intuitively by conditions of geometrical homogeneity. (P1) Knowledge of x tells us nothing about y That is, probabilities of errors in orthogonal directions should be independent; so the undetermined distribution should have the functional form ρ(x, y)dxdy = f (x)dx × f (y)dy.

(7.3)

We can write the distribution equally well in polar coordinates r , θ defined by x = r cos θ , y = r sin θ : ρ(x, y)dxdy = g(r, θ )r dr dθ.

1

(7.4)

It is general usage outside probability theory to denote any function of the general form exp{−ax 2 } as a Gaussian function, and we shall follow this.

7 The central, Gaussian or normal distribution

201

(P2) This probability should be independent of the angle: g(r, θ ) = g(r ) Then (7.3) and (7.4) yield the functional equation f (x) f (y) = g x 2 + y 2 ,

(7.5)

and, setting y = 0, this reduces to g(x) = f (x) f (0), so (7.5) becomes the functional equation

f (y) f ( x 2 + y2) f (x) + log = log . (7.6) log f (0) f (0) f (0) But the general solution of this is obvious; a function of x plus a function of y is a function only of x 2 + y 2 . The only possibility is that log[ f (x)/ f (0)] = ax 2 . We have a normalizable probability only if a is negative, and then normalization determines f (0); so the general solution can only have the form # α exp −αx 2 , α > 0, (7.7) f (x) = π with one undetermined parameter. The only two-dimensional probability density satisfying Herschel’s invariance conditions is a circular symmetric Gaussian: ρ(x, y) =

α exp −α(x 2 + y 2 ) . π

(7.8)

Ten years later, James Clerk Maxwell (1860) gave a three-dimensional version of this same argument to find the probability distribution ρ(vx , v y , vz ) ∝ exp{−α(vx2 + v 2y + vz2 )} for velocities of molecules in a gas, which has become well known to physicists as the ‘Maxwellian velocity distribution law’ fundamental to kinetic theory and statistical mechanics. The Herschel–Maxwell argument is particularly beautiful because two qualitative conditions, incompatible in general, become compatible for just one quantitative distribution, which they therefore uniquely determine. Einstein (1905a,b) used the same kind of argument to deduce the Lorentz transformation law from his two qualitative postulates of relativity theory.2 The Herschel–Maxwell derivation is economical also in that it does not actually make any use of probability theory; only geometrical invariance properties which could be applied equally well in other contexts. Gaussian functions are unique objects in their own right, for purely mathematical reasons. But now we give a famous derivation that makes explicit use of probabilistic intuition.

2

These are: (1) the laws of physics take the same form for all moving observers; and (2) the velocity of light has the same constant numerical value for all such observers. These are also contradictory in general, but become compatible for one particular quantitative law of transformation of space and time to a moving coordinate system.

202

Part I Principles and elementary applications

7.3 The Gauss derivation We estimate a location parameter θ from (n + 1) observations (x0 , . . . , xn ) by maximum likelihood. If the sampling distribution factors: p(x0 , . . . , xn |θ) = f (x0 |θ ) · · · f (xn |θ ), the likelihood equation is n ∂ log f (xi |θ) = 0, ∂θ i=0

(7.9)

or, writing log f (x|θ) = g(θ − x) = g(u),

(7.10)

the maximum likelihood estimate θˆ will satisfy g (θˆ − xi ) = 0.

(7.11)

i

Now, intuition may suggest to us that the estimate ought to be also the arithmetic mean of the observations: n 1 xi , (7.12) θˆ = x¯ = n + 1 i=0 but (7.11) and (7.12) are in general incompatible ((7.12) is not a root of (7.11)). Nevertheless, consider a possible sample, in which only one observation x0 is nonzero: if in (7.12) we put x0 = (n + 1)u,

x1 = x2 = · · · = xn = 0,

(−∞ < u < ∞),

(7.13)

then θˆ = u, θˆ − x0 = −nu, whereupon eqn. (7.11) becomes g (−nu) + ng (u) = 0, n = 1, 2, 3, . . .. The case n = 1 tells us that g (u) must be an antisymmetric function: g (−u) = −g (u), so this reduces to g (nu) = ng (u),

(−∞ < u < ∞),

n = 1, 2, 3, . . ..

(7.14)

Evidently, the only possibility is a linear function: 1 2 au + b. (7.15) 2 Converting back by (7.10), a normalizable distribution again requires that a be negative, and normalization then determines the constant b. The sampling distribution must have the form # 1 α 2 exp − α(x − θ) (0 < α < ∞). (7.16) f (x|θ ) = 2π 2 g (u) = au,

g(u) =

Since (7.16) was derived assuming the special sample (7.13), we have shown thus far only that (7.16) is a necessary condition for the equality of maximum likelihood estimate and sample mean. Conversely, if (7.16) is satisfied, then the likelihood equation (7.9) always has the unique solution (7.12); and so (7.16) is the necessary and sufficient condition for this agreement. The only freedom is the unspecified scale parameter α.

7 The central, Gaussian or normal distribution

203

7.4 Historical importance of Gauss’s result This derivation was given by Gauss (1809), as little more than a passing remark in a work concerned with astronomy. It might have gone unnoticed but for the fact that Laplace saw its merit and the following year published a large work calling attention to it and demonstrating the many useful properties of (7.16) as a sampling distribution. Ever since, it has been called the ‘Gaussian distribution’. Why was the Gauss derivation so sensational in effect? Because it put an end to a long – and, it seems to us today, scandalous – psychological hang up suffered by some of the greatest mathematicians of the time. The distribution (7.16) had been found in a more or less accidental way already by de Moivre (1733), who did not appreciate its significance and made no use of it. Throughout the 18th century, it would have been of great value to astronomers faced constantly with the problem of making the best estimates from discrepant observations; yet the greatest minds failed to see it. Worse, even the qualitative fact underlying data analysis – cancellation of errors by averaging of data – was not perceived by so great a mathematician as Leonhard Euler. Euler (1749), trying to resolve the ‘Great Inequality of Jupiter and Saturn’, found himself with what was at the time a monstrous problem (described briefly in our closing Comments, Section 7.27). To determine how the longitudes of Jupiter and Saturn had varied over long times, he made 75 observations over a 164 year period (1582–1745), and eight orbital parameters to estimate from them. Today, a desk-top microcomputer could solve this problem by an algorithm to be given in Chapter 19, and print out the best estimates of the eight parameters and their accuracies, in about one minute (the main computational job is the inversion of an (8 × 8) matrix). Euler failed to solve it, but not because of the magnitude of this computation; he failed even to comprehend the principle needed to solve it. Instead of seeing that by combining many observations their errors tend to cancel, he thought that this would only ‘multiply the errors’ and make things worse. In other words, Euler concentrated his attention entirely on the worst possible thing that could happen, as if it were certain to happen – which makes him perhaps the first really devout believer in Murphy’s Law.3 Yet, practical people, with experience in actual data taking, had long perceived that this worst possible thing does not happen. On the contrary, averaging our observations has the great advantage that the errors tend to cancel each other.4 Hipparchus, in the second century bc, estimated the precession of the equinoxes by averaging measurements on several stars. In the late 16th century, taking the average of several observations was the routine procedure of Tycho Brahe. Long before it had any formal theoretical justification from mathematicians, intuition had told observational astronomers that this averaging of data was the right thing to do. Some 30 years after Euler’s effort, another competent mathematician, Daniel Bernoulli (1777), still could not comprehend the procedure. Bernoulli supposes that an archer is 3 4

‘If anything can go wrong, it will go wrong.’ If positive and negative errors are equally likely, then the probability that ten errors all have the same sign is (0.5)9 0.002.

204

Part I Principles and elementary applications

shooting at a vertical line drawn on a target, and asks how many shots land in various vertical bands on either side of it: Now is it not self-evident that the hits must be assumed to be thicker and more numerous on any given band the nearer this is to the mark? If all the places on the vertical plane, whatever their distance from the mark, were equally liable to be hit, the most skillful shot would have no advantage over a blind man. That, however, is the tacit assertion of those who use the common rule (the arithmetic mean) in estimating the value of various discrepant observations, when they treat them all indiscriminately. In this way, therefore, the degree of probability of any given deviation could be determined to some extent a posteriori, since there is no doubt that, for a large number of shots, the probability is proportional to the number of shots which hit a band situated at a given distance from the mark.

We see that Daniel Bernoulli (1777), like his uncle James Bernoulli (1713), saw clearly the distinction between probability and frequency. In this respect, his understanding exceeded that of John Venn 100 years later, and Jerzy Neyman 200 years later. Yet he fails completely to understand the basis for taking the arithmetic mean of the observations as an estimate of the true ‘mark’. He takes it for granted (although a short calculation, which he was easily capable of doing, would have taught him otherwise) that, if the observations are given equal weight in calculating the average, then one must be assigning equal probability to all errors, however great. Presumably, others made intuitive guesses like this, unchecked by calculation, making this part of the folklore of the time. Then one can appreciate how astonishing it was when Gauss, 32 years later, proved that the condition (maximum likelihood estimate) = (arithmetic mean)

(7.17)

uniquely determines the Gaussian error law, not the uniform one. In the meantime, Laplace (1783) had investigated this law as a limiting form of the binomial distribution, derived its main properties, and suggested that it was so important that it ought to be tabulated; yet, lacking the above property demonstrated by Gauss, he still failed to see that it was the natural error law (the Herschel derivation was still 77 years in the future). Laplace persisted in trying to use the form f (x) ∝ exp{−a|x|}, which caused no end of analytical difficulties. But he did understand the qualitative principle that combination of observations improves the accuracy of estimates, and this was enough to enable him to solve, in 1787, the problem of Jupiter and Saturn, on which the greatest minds had been struggling since before he was born. Twenty-two years later, when Laplace saw the Gauss derivation, he understood it all in a flash – doubtless mentally kicked himself for not seeing it before – and hastened (Laplace, 1810, 1812) to give the central limit theorem and the full solution to the general problem of reduction of observations, which is still how we analyze it today. Not until the time of Einstein did such a simple mathematical argument again have such a great effect on scientific practice.

7 The central, Gaussian or normal distribution

205

7.5 The Landon derivation A derivation of the Gaussian distribution that gives us a very lively picture of the process by which a Gaussian frequency distribution is built up in Nature was given in 1941 by Vernon D. Landon, an electrical engineer studying properties of noise in communication circuits. We give a generalization of his argument, in our current terminology and notation. The argument was suggested by the empirical observation that the variability of the electrical noise voltage v(t) observed in a circuit at time t seems always to have the same general properties, even though it occurs at many different levels (say, mean square values) corresponding to different temperatures, amplifications, impedance levels, and even different kinds of sources – natural, astrophysical, or man-made by many different devices such as vacuum tubes, neon signs, capacitors, resistors made of many different materials, etc. Previously, engineers had tried to characterize the noise generated by different sources in terms of some ‘statistic’ such as the ratio of peak to RMS (root mean square) value, which it was thought might identify its origin. Landon recognized that these attempts had failed, and that the samples of electrical noise produced by widely different sources ‘. . . cannot be distinguished one from the other by any known test’.5 Landon reasoned that if this frequency distribution of noise voltage is so universal, then it must be better determined theoretically than empirically. To account for this universality but for magnitude, he visualized not a single distribution for the voltage at any given time, but a hierarchy of distributions p(v|σ ) characterized by a single scale parameter σ 2 , which we shall take to be the expected square of the noise voltage. The stability seems to imply that, if the noise level σ 2 is increased by adding a small increment of voltage, the probability distribution still has the same functional form, but is only moved up the hierarchy to the new value of σ . He discovered that for only one functional form of p(v|σ ) will this be true. Suppose the noise voltage v is assigned the probability distribution p(v|σ ). Then it is incremented by a small extra contribution , becoming v = v + , where is small compared with σ , and has a probability distribution q()d, independent of p(v|σ ). Given a specific , the probability for the new noise voltage to have the value v would be just the previous probability that v should have the value (v − ). Thus, by the product and sum rules of probability theory, the new probability distribution is the convolution (7.18) f (v ) = d p(v − |σ )q(). Expanding this in powers of the small quantity and dropping the prime, we have 1 ∂ 2 p(v|σ ) ∂ p(v|σ ) (7.19) d q() + d 2 q() + · · · , f (v) = p(v|σ ) − ∂v 2 ∂v 2 5

This universal, stable type of noise was called ‘grass’ because that is what it looks like on an oscilloscope. To the ear, it sounds like a smooth hissing without any discernible pitch; today this is familiar to everyone because it is what we hear when a television receiver is tuned to an unused channel. Then the automatic gain control turns the gain up to the maximum, and both the hissing sound and the flickering ‘snow’ on the screen are the greatly amplified noise generated by random thermal motion of electrons in the antenna according to the Nyquist law noted below.

206

Part I Principles and elementary applications

or, now writing for brevity p ≡ p(v|σ ), f (v) = p −

∂ p 1 2 ∂2 p + 2 + · · · . ∂v 2 ∂v

(7.20)

This shows the general form of the expansion; but now we assume that the increment is as likely to be positive as negative:6 = 0. At the same time, the expectation of v 2 is increased to σ 2 + 2 , so Landon’s invariance property requires that f (v) should be equal also to ∂p (7.21) f (v) = p + 2 2 . ∂σ Comparing (7.20) and (7.21), we have the condition for this invariance: ∂p 1 ∂2 p = . ∂σ 2 2 ∂v 2

(7.22)

But this is a well-known differential equation (the ‘diffusion equation’), whose solution with the obvious initial condition p(v|σ = 0) = δ(v) is v2 1 exp − 2 , (7.23) p(v|σ ) = √ 2σ 2πσ 2 the standard Gaussian distribution. By minor changes in the wording, the above mathematical argument can be interpreted either as calculating a probability distribution, or as estimating a frequency distribution; in 1941 nobody except Harold Jeffreys and John Maynard Keynes took note of such distinctions. As we shall see, this is, in spirit, an incremental version of the central limit theorem; instead of adding up all the small contributions at once, it takes them into account one at a time, requiring that at each step the new probability distribution has the same functional form (to second order in ). This is just the process by which noise is produced in Nature – by addition of many small increments, one at a time (for example, collisions of individual electrons with atoms, each collision radiating another tiny pulse of electromagnetic waves, whose sum is the observed noise). Once a Gaussian form is attained, it is preserved; this process can be stopped at any point, and the resulting final distribution still has the Gaussian form. What is at first surprising is that this stable form is independent of the distributions q() of the small increments; that is why the noise from different sources could not be distinguished by any test known in 1941.7 Today we can go further and recognize that the reason for this independence was that only the second moment 2 of the increments mattered for the updated point distribution (that 6 7

If the small increments all had a systematic component in the same direction, one would build up a large ‘DC’ noise voltage, which is manifestly not the present situation. But the resulting solution might have other √ applications; see Exercise 7.1. Landon’s original derivation concerned only a special case of this, in which q() = [π a 2 − 2 ]−1 , || < a, corresponding to an added sinusoid of amplitude a and unknown phase. But the important thing was his idea of the derivation, which anyone can generalize once it is grasped. In essence he had discovered independently, in the expansion (7.20), what is now called the Fokker–Planck equation of statistical mechanics, a powerful method which we shall use later to show how a nonequilibrium probability distribution relaxes into an equilibrium one. It is now known to have a deep meaning, in terms of continually remaximized entropy.

7 The central, Gaussian or normal distribution

207

is, the probability distribution for the voltage at a given time that we were seeking). Even the magnitude of the second moment did not matter for the functional form; it determined only how far up the σ 2 hierarchy we moved. But if we ask a more detailed question, involving time-dependent correlation functions, then noise samples from different sources are no longer indistinguishable. The second-order correlations of the form (t)(t ) are related to the power spectrum of the noise through the Wiener–Khinchin theorem, which was just in the process of being discovered in 1941; they give information about the duration in time of the small increments. But if we go to fourth-order correlations (t1 )(t2 )(t3 )(t4 ) we obtain still more detailed information, different for different sources, even though they all have the same Gaussian point distribution and the same power spectrum.8

Exercise 7.1. The above derivation established the result to order 2 . Now suppose that we add n such small increments, bringing the variance up to σ 2 + n 2 . Show that in the limit n → ∞, 2 → 0, n 2 → const., the Gaussian distribution (7.23) becomes exact (the higher terms in the expansion (7.19) become vanishingly small compared with the terms in 2 ).

Exercise 7.2. Repeat the above derivation without assuming that = 0 in (7.20). The resulting differential equation is a Fokker–Planck equation. Show that there is now a superimposed steady drift, the solutions having the form exp{−(v − aσ 2 )2 /2σ 2 }. Suggest a possible useful application of this result. Hint: σ 2 and v may be given other interpretations, such as time and distance.

7.6 Why the ubiquitous use of Gaussian distributions? We started this chapter by noting the surprise of de Morgan and Barnard at the great and ubiquitous success that is achieved in inference – particularly, in parameter estimation – through the use of Gaussian sampling distributions, and the reluctance of Feller to believe that such success was possible. It is surprising that to understand this mystery requires almost no mathematics – only a conceptual reorientation toward the idea of probability theory as logic. Let us think in terms of the information that is conveyed by our equations. Whether or not the long-run frequency distribution of errors is in fact Gaussian is almost never 8

Recognition of this invalidates many na¨ıve arguments by physicists who try to prove that ‘Maxwell demons’ are impossible by assuming that thermal radiation has a universal character, making it impossible to distinguish the source of the radiation. But only the second-order correlations are universal; a demon who perceives fourth-order correlations in thermal radiation is far from blind about the details of his surroundings. Indeed, the famous Hanbury Brown–Twiss interferometer (1956), invokes just such a fourth-order demon, in space instead of time and observing 2 (x1 ) 2 (x2 ) to measure the angular diameters of stars. Conventional arguments against Maxwell demons are logically flawed and prove nothing.

208

Part I Principles and elementary applications

known empirically; what the scientist knows about them (from past experience or from theory) is almost always simply their general magnitude. For example, today most accurate experiments in physics take data electronically, and a physicist usually knows the mean square error of those measurements because it is related to the temperature by the wellknown Nyquist thermal fluctuation law.9 But he seldom knows any other property of the noise. If he assigns the first two moments of a noise probability distribution to agree with such information, but has no further information and therefore imposes no further constraints, then a Gaussian distribution fit to those moments will, according to the principle of maximum entropy as discussed in Chapter 11, represent most honestly his state of knowledge about the noise. But we must stress a point of logic concerning this. It represents most honestly the physicist’s state of knowledge about the particular samples of noise for which he had data. This never includes the noise in the measurement which he is about to make! If we suppose that knowledge about some past samples of noise applies also to the specific sample of noise that we are about to encounter, then we are making an inductive inference that might or might not be justified; and honesty requires that we recognize this. Then past noise samples are relevant for predicting future noise only through those aspects that we believe should be reproducible in the future. In practice, common sense usually tells us that any observed fine details of past noise are irrelevant for predicting fine details of future noise, but that coarser features, such as past mean square values, may be expected reasonably to persist, and thus be relevant for predicting future mean square values. Then our probability assignment for future noise should make use only of those coarse features of past noise which we believe to have this persistence. That is, it should have maximum entropy subject to the constraints of the coarse features that we retain because we expect them to be reproducible. Probability theory becomes a much more powerful reasoning tool when guided by a little common sense judgment of this kind about the real world, as expressed in our choice of a model and assignment of prior probabilities. Thus we shall find in studying maximum entropy below that, when we use a Gaussian sampling distribution for the noise, we are in effect telling the robot: ‘The only thing I know about the noise is its first two moments, so please take that into account in assigning your probability distribution, but be careful not to assume anything else about the noise.’ We shall see presently how well the robot obeys this instruction.10 9

10

A circuit element of resistance R(ω) ohms at angular frequency ω develops across its terminals in a small frequency band ω = 2π f a fluctuating mean square open-circuit voltage V 2 = 4kT R f , where f is the frequency in hertz (cycles per second), k ≡ 1.38 × 10−23 joule/degree is Boltzmann’s constant, and T is the Kelvin temperature. Thus it can deliver to another circuit element the maximum noise power P = V 2 /4R = kT f . At room temperature, T = 300 K, this is about 4 × 10−15 watt/megahertz bandwidth. Any signal of lower intensity than this will be lost in the thermal noise and cannot be recovered, ordinarily, by any amount of amplification. But prior information about the kind of signal to be expected will still enable a Bayesian computer program to extract weaker signals, as the work of Bretthorst (1988) demonstrates. We study this in Part 2. If we have further pieces of information about the noise, such as a fourth moment or an upper bound, the robot can take these into account also by assigning generalized Gaussian – that is, general maximum entropy – noise probability distributions. Examples of the use of fourth-moment constraints in economics and physical chemistry are given by Gray and Gubbins (1984) and Zellner (1988).

7 The central, Gaussian or normal distribution

209

This does not mean that the full frequency distribution of the past noise is to be ignored if it happens to be known. Probability theory as logic does not conflict with conventional orthodox theory if we actually have the information (that is, perfect knowledge of limiting frequencies, and no other information) that orthodox theory presupposes; but it continues to operate using whatever information we have. In the vast majority of real problems we lack this frequency information but have other information (such as mean square value, digitizing interval, power spectrum of the noise); and a correct probability analysis readily takes this into account, by using the technical apparatus that orthodoxy lacks.

Exercise 7.3. Suppose that the long-run frequency distribution of the noise has been found empirically to be the function f (e) (never mind how one could actually obtain that information), and that we have no other information about the noise. Show, by reasoning like that leading to (4.55) and using Laplace’s Rule of Succession (6.73), that, in the limit of a very large amount of frequency data, our probability distribution for the noise becomes numerically equal to the observed frequency distribution: p(e|I ) → f (e). This is what Daniel Bernoulli conjectured in Section 7.4. But state very carefully the exact conditions for this to be true.

In other fields, such as analysis of economic data, knowledge of the noise may be more crude, consisting of its approximate general magnitude and nothing else. But for reasons noted below (the central limit theorem), we still have good reasons to expect a Gaussian functional form; so a Gaussian distribution fit to that magnitude is still a good representation of one’s state of knowledge. If even that knowledge is lacking, we still have good reason to expect the Gaussian functional form, so a sampling distribution with σ an undetermined nuisance parameter to be estimated from the data is an appropriate and useful starting point. Indeed, as Bretthorst (1988) demonstrates, this is often the safest procedure, even in a physics experiment, because the noise may not be the theoretically well understood Nyquist noise. No source has ever been found which generates noise below the Nyquist value – and from the second law of thermodynamics we do not expect to find such a source, because the Nyquist law is only the low-frequency limit of the Planck black-body radiation law – but a defective apparatus may generate noise far above the Nyquist value. One can still conduct the experiment with such an apparatus, taking into account the greater noise magnitude; but, of course, a wise experimenter who knows that this is happening will try to improve his apparatus before proceeding. We shall find, in the central limit theorem, still another strong justification for using Gaussian error distributions. But if the Gaussian law is nearly always a good representation of our state of knowledge about the errors in our specific data set, it follows that inferences made from it are nearly always the best ones that could have been made from the information that we actually have.

210

Part I Principles and elementary applications

Now, as we note presently, the data give us a great deal of information about the noise, not usually recognized. But Bayes’ theorem automatically takes into account whatever can be inferred about the noise from the data; to the best of our knowledge, this has not been recognized in the previous literature. Therefore Bayesian inferences using a Gaussian sampling distribution could be improved upon only by one who had additional information about the actual errors in his specific data set, beyond its first two moments and beyond what is known from the data. For this reason, whether our inferences are successful or not, unless such extra information is at hand, there is no justification for adopting a different error law; and, indeed, no principle to tell us which different one to adopt. This explains the ubiquitous use. Since the time of Gauss and Laplace, the great majority of all inference procedures with continuous probability distributions have been conducted – necessarily and properly – with Gaussian sampling distributions. Those who disapproved of this, whatever the grounds for their objection, have been unable to offer any alternative that was not subject to a worse objection; so, already in the time of de Morgan, some 25 years after the work of Laplace, use of the Gaussian rule had become ubiquitous by default, and this continues today. Recognition of this considerably simplifies our expositions of Bayesian inference; 95% of our analysis can be conducted with a Gaussian sampling distribution, and only in special circumstances (unusual prior information such as that the errors are pure digitizing errors or that there is an upper bound to the possible error magnitude) is there any reason for adopting a different one. But even in those special circumstances, the Gaussian analysis usually leads to final conclusions so near to the exact ones that the difference is hardly worth the extra effort. It is now clear that the most ubiquitous reason for using the Gaussian sampling distribution is not that the error frequencies are known to be – or assumed to be – Gaussian, but rather because those frequencies are unknown. One sees what a totally different outlook this is than that of Feller and Barnard; ‘normality’ was not an assumption of physical fact at all. It was a valid description of our state of knowledge. In most cases, had we done anything different, we would be making an unjustified, gratuitous assumption (violating one of our Chapter 1 desiderata of rationality). But this still does not explain why the procedure is so successful. 7.7 Why the ubiquitous success? By ‘ubiquitous success’ we mean that, for nearly two centuries, the Gaussian sampling distribution has continued to be, in almost all problems, much easier to use and to yield better results (more accurate parameter estimates) than any alternative sampling distribution that anyone has been able to suggest. To explain this requires that analysis that de Morgan predicted would one day be found. But why did it require so long to find that analysis? As a start toward answering this, note that we are going to use some function of the data as our estimate; then, whether our present inference – here and now – is or is not successful, depends entirely on what that function is, and on the actual errors that are present in the

7 The central, Gaussian or normal distribution

211

one specific data set that we are analyzing. Therefore to explain its success requires that we examine that specific data set. The frequency distribution of errors in other data sets that we might have got but did not – and which we are therefore not analyzing – is irrelevant, unless (a) it is actually known, not merely imagined; (b) it tells us something about the errors in our specific data set that we would not know otherwise. We have never seen a real problem in which these conditions were met; those who emphasized frequencies most strongly merely assumed them without pointing to any actual measurement. They persisted in trying to justify the Gaussian distribution in terms of assumed frequencies in imaginary data sets that have never been observed; thus they continued to dwell on fantasies instead of the information that was actually relevant to the inference; and so we understand why they were unable to find any explanation of the success of that distribution. Thus, Feller, thinking exclusively in terms of sampling distributions for estimators, thought that, unless our sampling distribution for the ei correctly represented the actual frequencies of errors, our estimates would be in some way unsatisfactory; in exactly what way seems never to have been stated by Feller or anyone else. Now there is a closely related truth here: If our estimator is a given, fixed function of the data, then the actual variability of the estimate in the long-run over all possible data sets, is indeed determined by the actual long-run frequency distribution of the errors, if such a thing exists. But does it follow that our assigned sampling distribution must be equal to that frequency distribution in order to get satisfactory estimates? To the best of our knowledge, orthodoxy has never attempted to give any such demonstration, or even recognized the need for it. But this makes us aware of another, equally serious, difficulty.

7.8 What estimator should we use? In estimating a parameter µ from data D, the orthodoxian would almost surely use the maximum likelihood estimator; that is, the value of µ for which p(D|µ) is a maximum. If the prior information is unimportant (that is, if the prior probability density p(µ|I ) is essentially constant over the region of high likelihood), the Bayesian might do this also. But is there any proof that the maximum likelihood estimator yields the most accurate estimates? Might not the estimates of µ be made still better in the long-run (i.e., more closely concentrated about the true value µ0 ) by a different choice of estimator? This question also remains open; there are two big gaps in the logic here. More fundamental than the logical gaps is the conceptual disorientation; the scenario envisaged by Feller is not the real problem facing a scientist. As John Maynard Keynes (1921) emphasized long ago, his job is not to fantasize about an imaginary ‘long-run’ which will never be realized, but to estimate the parameters in the one real case before him, from the one real data set that he actually has.11 11

Curiously, in that same after-dinner speech, Feller also railed against those who fail to distinguish between the long-run and the individual case, yet it appears to us that it was Feller who failed to make that distinction properly. He would judge the merit of

212

Part I Principles and elementary applications

To raise these issues is not mere nitpicking; let us show that in general there actually is a better estimator, by the long-run sampling theory criterion, than the maximum likelihood estimator. As we have just seen, Gauss proved that the condition (maximum likelihood estimator) = (arithmetic mean of the observations)

(7.24)

uniquely determines the Gaussian sampling distribution. Therefore, if our sampling distribution is not Gaussian, these two estimators are different. Then, which is better? Almost all sampling distributions used are of the ‘independent, identically distributed’ (iid) form: p(x1 · · · xn |µI ) =

n

f (xi − µ).

(7.25)

i=1

Bayesian analysis has the theoretical principles needed to determine the optimal estimate for each data set whatever the sampling distribution; it will lead us to make the posterior mean estimate as the one that minimizes the expected square of the error, the posterior median as the one that minimizes the absolute error, etc. If the sampling distribution is not Gaussian, the estimator proves typically to be a linear combination of the observations (µ)est = wi yi , but with variable weighting coefficients wi depending on the data configuration (yi − y j ), 1 ≤ i, j ≤ n. Thus the estimate is, in general, a nonlinear function of the observations.12 In contrast, consider a typical real problem from the orthodox viewpoint which has no prior probabilities or loss functions. We are trying to estimate a location parameter µ, and our data D consist of n observations: D = {y1 , . . . , yn }. But they have errors that vary in a way that is uncontrolled by the experimenter and unpredictable from his state of knowledge.13 In the following we denote the unknown true value by µ0 , and use µ as a general running variable. Then our model is

12

13

an individual case inference by its imagined long-run properties. But it is not only possible, but common as soon as we depart from Gaussian sampling distributions, that an estimator which is proved to be as good as can be obtained, as judged by its long-run success over all data sets, may nevertheless be very poor for our particular data set and should not be used for it. Then the sampling distribution for any particular estimator (i.e. any particular function f (y1 · · · yn ) of the data) becomes irrelevant because with different data sets we shall use different estimators. Thus, to suppose that a procedure that works satisfactorily with Gaussian distributions should be used also with others, can lead one to be badly mistaken in more than one way. This introduces us to the phenomena of sufficiency and ancillarity, pointed out by R. A. Fisher in the 1930s and discussed in Chapter 8. But it is now known that Bayes’ theorem automatically detects these situations and does the right thing here, choosing for each data set the optimal estimator for that data set. In other words, the correct solution to the difficulties pointed out by Fisher is just to return to the original Bayesian analysis of Laplace and Jeffreys, that Fisher thought to be wrong. The reader may find it instructive to verify this in detail for the simple looking Cauchy sampling distribution 1 1 (7.26) p(yi |µI ) = π 1 + (yi − µ)2 for which the nonlinear functions are surprisingly complicated. This does not mean that they are ‘not determined by anything’ as is so often implied by those suffering from the mind projection fallacy; it means only that they are not determined by any circumstances that the experimenter is controlling or observing. Whether the determining factors could or could not be observed in principle is irrelevant to the present problem, which is to reason as best we can in the state of knowledge that we have specified.

7 The central, Gaussian or normal distribution

yi = µ0 + ei ,

(1 ≤ i ≤ n),

213

(7.27)

where ei is the actual error in the ith measurement. Now, if we assign an independent Gaussian sampling distribution for the errors ei = yi − µ0 :

n/2 1 (yi − µ0 )2 exp − , (7.28) p(D|µ0 σ I ) = 2πσ 2 2σ 2 we have n (yi − µ0 )2 = n[(µ0 − y)2 + s 2 ],

(7.29)

i=1

where 1 s 2 ≡ y 2 − y 2 = e2 − e2 (7.30) yi = µ0 + e, n are the only properties of the data that appear in the likelihood function. Thus the consequence of assigning the Gaussian error distribution is that only the first two moments of the data are going to be used for inferences about µ0 (and about σ , if it is unknown). They are called the sufficient statistics. From (7.30) it follows that only the first two moments of the noise values {e1 , . . . , en }, 1 1 2 e= ei , e2 = e , (7.31) n i n i i y≡

can matter for the error in our estimate. We have, in a sense, the simplest possible connection between the errors in our data and the error in our estimate. If we estimate µ by the arithmetic mean of the observations, the actual error we shall make in the estimate is the average of the individual errors in our specific data set:14 ≡ y − µ0 = e.

(7.32)

Note that e is not an average over any probability distribution; it is the average of the actual errors, and this result holds however the actual errors ei are distributed. For example, whether a histogram of the ei closely resembles the assigned Gaussian (7.28) or whether all of the error happens to be in e1 does not matter in the least; (7.32) remains correct. 7.9 Error cancellation An important reason for the success of the Gaussian sampling distribution lies in its relation to the aforementioned error cancellation phenomenon. Suppose we estimate µ by some linear combination of the data values: n wi yi , (7.33) (µ)est = i=1 14

Of course, probability theory tells us that this is the best estimate we can make if, as supposed, the only information we have about µ comes from this one data set. If we have other information (previous data sets, other prior information) we should take it into account; but then we are considering a different problem.

214

Part I Principles and elementary applications

where the weighting coefficients wi are real numbers satisfying wi = 1, wi ≥ 0, 1 ≤ i ≤ n. Then with the model (7.27), the square of the error we shall make in our estimate is 2 n 2 2 wi ei = wi w j ei e j , (7.34) = [(µ)est − µ0 ] = i

i, j=1

and the expectation of this over whatever sampling distribution we have assigned is wi w j ei e j . (7.35) 2 = i, j

But if we have assigned identical and independent probabilities to each ei separately, as is almost always supposed, then ei e j = σ 2 δi j , and so wi2 . (7.36) 2 = σ 2 i

Now set wi = n −1 + qi , where the {qi } are real numbers constrained only by qi = 0. The expected square of the error is then

1 1 2 2qi 2 2 2 2 + qi = σ + + qi , = σ n2 n n i i

wi = 1, or

(7.37)

from which it is evident that 2 reaches its absolute minimum σ2 (7.38) n if and only if all qi = 0. We have the result that uniform weighting, wi = 1/n, leading to the arithmetic mean of the observations as our estimate, achieves a smaller expected square of the error than any other; in other words, it affords the maximum possible opportunity for that error cancellation to take place. Note that the result is independent of what sampling distribution p(ei |I ) we use for the individual errors. But highly cogent prior information about µ (that is, the prior density p(µ|I ) varies greatly within the high likelihood region) would lead us to modify this somewhat. If we have no important prior information, use of the Gaussian sampling distribution automatically leads us to estimate µ by the arithmetic mean of the observations; and Gauss proved that the Gaussian distribution is the only one which does this. Therefore, among all sampling distributions which estimate µ by the arithmetic mean of the observations, the Gaussian distribution is uniquely determined as the one that gives maximum error cancellation. This finally makes it very clear why the Gaussian sampling distribution has enjoyed that ubiquitous success over the years compared with others, fulfilling de Morgan’s prediction: 2 min =

When we assign an independent Gaussian sampling distribution to additive noise, what we achieve is not that the error frequencies are correctly represented, but that those frequencies are made irrelevant to the inference, in two respects. (1) All other aspects of the noise beyond e and e2 contribute nothing to the numerical value or the accuracy of our estimates. (2) Our estimate is more accurate than that

7 The central, Gaussian or normal distribution

215

from any other sampling distribution that estimates a location parameter by a linear combination of the observations, because it has the maximum possible error cancellation.

Exercise 7.4. More generally, one could contemplate a sampling distribution p(e1 , . . . , en |I ) which assigns different marginal distributions p(ei |I ) to the different ei , and allows arbitrary correlations between different ei . Then the covariance matrix Ci j ≡ ei e j is a general n × n positive definite matrix. In this case, prove that the minimum 2 is achieved by the weighting coefficients Ki j / Ki j , (7.39) wi = j

where K = C 2 is then

−1

ij

is the inverse covariance matrix; and that the minimum achievable min = 2

−1 Ki j

.

(7.40)

ij

In the case Ci j = σ 2 δi j , this reduces to the previous result (7.38).

In view of the discovery of de Groot and Goel (1980) that ‘Only normal distributions have linear posterior expectations’, it may be that we are discussing an empty case. We need the solution to another mathematical problem: ‘What is the most general sampling distribution that estimates a location parameter by a linear function of the observations?’ The work of de Groot and Goel suggests, but in our view does not prove, that the answer is again a Gaussian distribution. Note that we are considering two different problems here, (7.38) is the ‘risk’, or expected, square of the error over the sampling distribution; while de Groot and Goel were considering expectations over the posterior distribution.

7.10 The near irrelevance of sampling frequency distributions Another way of looking at this is helpful. As we have seen before, in a repetitive situation the probability of any event is usually the same as its expected frequency (using, of course, the same basic probability distribution for both). Then, given a sampling distribution f (y|θ), it tells us that R dy f (y|θ) is the expected frequency, before the data are known of the event y ∈ R. But if, as always supposed in elementary parameter estimation, the parameters are held fixed throughout the taking of a data set, then the variability of the data is also, necessarily, the variability of the actual errors in that data set. If we have defined our model to have the form yi = f (xi ) + ei , in which the noise is additive, then the exact distribution of the errors is known from the data to within a uniform translation: ei − e j = yi − y j . We know from the data y that the exact error in the ith observation has the form ei = yi − e0 , where

216

Part I Principles and elementary applications

e0 is an unknown constant. Whether the frequency distribution of the errors does or does not have the Gaussian functional form is known from the data. Then what use remains for the sampling distribution, which in orthodox theory yields only the prior expectations of the error frequencies? Whatever form of frequency distribution we might have expected before seeing the data, is rendered irrelevant by the information in the data! What remains significant for inference is the likelihood function – how the probability of the observed data set varies with the parameters θ. Although all these results are mathematically trivial, we stress their nontrivial consequences by repeating them in different words. A Gaussian distribution has a far deeper connection with the arithmetic mean than that shown by Gauss. If we assign the independent Gaussian error distribution, then the error in our estimate is always the arithmetic mean of the true errors in our data set; and whether the frequency distribution of those errors is or is not Gaussian is totally irrelevant. Any error vector {e1 , . . . , en } with the same first moment e will lead us to the same estimate of µ; and any error vector with the same first two moments will lead us to the same estimates of both µ and σ and the same accuracy claims, whatever the frequency distributions of the individual errors. This is a large part of the answer to de Morgan, Feller, and Barnard. This makes it clear that what matters to us functionally – that is, what determines the actual error of our estimate – is not whether the Gaussian error law correctly describes the limiting frequency distribution of the errors; but rather whether that error law correctly describes our prior information about the actual errors in our data set. If it does, then the above calculations are the best we can do with the information we have; and there is nothing more to be said. The only case where we should – or indeed, could – do anything different is when we have additional prior information about the errors beyond their first two moments. For example, if we know that they are simple digitizing errors with digitizing interval δ, then we know that there is a rigid upper bound to the magnitude of any error: |ei | ≤ δ/2. Then if δ < σ , use of the appropriate truncated sampling distribution instead of the Gaussian (7.28) will almost surely lead to more accurate estimates of µ. This kind of prior information can be very helpful (although it complicates the analytical solution, this is no deterrent to a computer), and we consider a problem of this type in Section 7.17. Closer to the present issue, in what sense and under what conditions does the Gaussian error law ‘correctly describe’ our information about the errors?

7.11 The remarkable efficiency of information transfer Again, we anticipate a few results from later chapters in order to obtain a quick, preliminary view of what is happening, which will improve our judgment in setting up real problems. The noise probability distribution p(e|αβ) which has maximum entropy H = − de p(e) log p(e) subject to the constraints of prescribed expectations e = α,

e2 = α 2 + β 2 ,

(7.41)

7 The central, Gaussian or normal distribution

217

in which the brackets now denote averages over the probability distribution p(e|αβ), is the Gaussian (e − α)2 1 . (7.42) exp − p(e|αβ) = 2β 2 2πβ 2 So a state of prior information which leads us to prescribe the expected first and second moments of the noise – and nothing else – uniquely determines the Gaussian distribution. Then it is eminently satisfactory that this leads to inferences that depend on the noise only through the first and second moments of the actual errors. When we assign error probabilities by the principle of maximum entropy, the only properties of the errors that are used in our Bayesian inference are the properties about which we specified some prior information. This is a very important second part of that answer. In this example, we have stumbled for the first time onto a fundamental feature of probability theory as logic: if we assign probabilities to represent our information, then circumstances about which we have no information, are not used in our subsequent inferences. But it is not only true of this example; we shall find when we study maximum entropy that it is a general theorem that any sampling distribution assigned by maximum entropy leads to Bayesian inferences that depend only on the information that we incorporated as constraints in the entropy maximization.15 Put differently, our rules for extended logic automatically use all the information that we have, and avoid assuming information that we do not have. Indeed, our Chapter 1 desiderata require this. In spite of its extremely simple formal structure in the product and sum rules, probability theory as logic has a remarkable sophistication in applications. It perceives instantly what generations of statisticians and probabilists failed to see; for a probability calculation to have a useful and reliable function in the real world, it is by no means required that the probabilities have any relation to frequencies.16 Once this is pointed out, it seems obvious that circumstances about which we have no information cannot be of any use to us in inference. Rules for inference which fail to recognize this and try to introduce such quantities as error frequencies into the calculation as ad hoc assumptions, even when we have no information about them, are claiming, in effect, to get something for nothing (in fact, they are injecting arbitrary – and therefore almost certainly false – information). Such devices may be usable in some small class of problems; but they are guaranteed to yield wrong and/or misleading conclusions if applied outside that class. On the other hand, probability theory as logic is always safe and conservative, in the following sense: it always spreads the probability out over the full range of conditions 15

16

Technically (Chapter 8), the class of sampling distributions which have sufficient statistics is precisely the class generated by the maximum entropy principle; and the resulting sufficient statistics are precisely the constraints which determined that maximum entropy distribution. This is not to say that probabilities are forbidden to have any relation to frequencies; the point is rather that whether they do or do not depends on the problem, and probability theory as logic works equally well in either case. We shall see, in the work of Galton below, an example where a clear frequency connection is present, and analysis of the general conditions for this will appear in Chapter 9.

218

Part I Principles and elementary applications

allowed by the information used; our basic desiderata require this. Thus it always yields the conclusions that are justified by the information which was put into it. The robot can return vague estimates if we give it vague or incomplete information; but then it warns us of that fact by returning posterior distributions so wide that they still include the true value of the parameter. It cannot actually mislead us – in the sense of assigning a high probability to a false conclusion – unless we have given it false information. For example, if we assign a sampling distribution which supposes the errors to be far smaller than the actual errors, then we have put false information into the problem, and the consequence will be, not necessarily bad estimates of parameters, but false claims about the accuracy of those estimates and – often more serious – the robot can hallucinate, artifacts of the noise being misinterpreted as real effects. As de Morgan (1872, p. 113) put it, this is the error of ‘attributing to the motion of the moon in her orbit all the tremors which she gets from a shaky telescope’. Conversely, if we use a sampling distribution which supposes the errors to be much larger than the actual errors, the result is not necessarily bad estimates, but overly conservative accuracy claims for them and – often more serious – blunt perception, failing to recognize effects that are real, by dismissing them as part of the noise. This would be the opposite error of attributing to a shaky telescope the real and highly important deviation of the moon from her expected orbit. If we use a sampling distribution that reflects the true average errors and the true mean square errors, we have the maximum protection against both of these extremes of misperception, steering the safest possible middle course between them. These properties are demonstrated in detail later. 7.12 Other sampling distributions Once we understand the reasons for the success of Gaussian inference, we can also see very rare special circumstances where a different sampling distribution would better express our state of knowledge. For example, if we know that the errors are being generated by the unavoidable and uncontrollable rotation of some small object, in such a way that when it is at angle θ, the error is e = α cos θ but the actual angle √ is unknown, a little analysis shows that the prior probability assignment p(e|I ) = (π α 2 − e2 )−1 , e2 < α 2 , correctly describes our state of knowledge about the error. Therefore it should be used instead of the Gaussian distribution; since it has a sharp upper bound, it may yield appreciably better estimates than would the Gaussian – even if α is unknown and must therefore be estimated from the data (or perhaps it is the parameter of interest to be estimated). Or, if the error is known to have the form e = α tan θ but θ is unknown, we find that the prior probability is the Cauchy distribution p(e|I ) = π −1 α/(α 2 + e2 ). Although this case is rare, we shall find it an instructive exercise to analyze inference with a Cauchy sampling distribution, because qualitatively different things can happen. Orthodoxy regards this as ‘a pathological, exceptional case’ as one referee put it, but it causes no difficulty in Bayesian analysis, which enables us to understand it.

7 The central, Gaussian or normal distribution

219

7.13 Nuisance parameters as safety devices As an example of this principle, if we do not have actual knowledge about the magnitude σ of our errors, then it could be dangerous folly to assume some arbitrary value; the wisest and safest procedure is to adopt a model which honestly acknowledges our ignorance by allowing for various possible values of σ ; we should assign a prior p(σ |I ) which indicates the range of values that σ might reasonably have, consistent with our prior information. Then in the Bayesian analysis we shall find first the joint posterior pdf for both parameters: p(µσ |D I ) = p(µσ |I )

p(D|µσ I ) . p(D|I )

(7.43)

But now notice how the product rule rearranges this: p(µσ |D I ) = p(σ |I ) p(µ|σ I )

p(D|σ I ) p(µ|σ D I ) = p(µ|σ D I ) p(σ |D I ). p(D|I ) p(µ|σ I )

(7.44)

So, if we now integrate out σ as a nuisance parameter, we obtain the marginal posterior pdf for µ alone in the form: p(µ|D I ) = dσ p(µ|σ D I ) p(σ |D I ), (7.45) a weighted average of the pdfs p(µ|σ D I ) for all possible values of σ , weighted according to the marginal posterior pdf p(σ |D I ) for σ , which represents everything we know about σ . Thus when we integrate out a nuisance parameter, we are not throwing away any information relevant to the parameters we keep; on the contrary, probability theory automatically estimates the nuisance parameter for us from all the available evidence, and takes that information fully into account in the marginal posterior pdf for the interesting parameters (but it does this in such a slick, efficient way that one may not realize that this is happening, and think that he is losing something). In the limit where the data are able to determine the true value σ = σ0 very accurately, p(σ |D I ) → δ(σ − σ0 ) and p(µ|D I ) → p(µ|σ0 D I ); the theory yields, as it should, the same conclusions that we would have if the true value were known from the start. This is just one example illustrating that, as noted above, whatever question we ask, probability theory as logic automatically takes into account all the possibilities allowed by our model and our information. Then, of course, the onus is on us to choose a model wisely so that the robot is given the freedom to estimate for itself, from the totality of its information, any parameter that we do not know. If we fail to recognize the existence of a parameter which is uninteresting but nevertheless affects our data – and so leave it out of the model – then the robot is crippled and cannot return the optimal inferences to us. The marginalization paradox, discussed in Chapter 15, and the data pooling paradox of Chapter 8, exhibit some of the things that can happen then; the robot’s conclusions are still the best ones that could have been made from the information we gave it, but they are not the ones that simple common sense would make, using extra information that we failed to give it.

220

Part I Principles and elementary applications

In practice, we find that recognition of a relevant, but unknown and uninteresting, parameter by including it in the model and then integrating it out again as a nuisance parameter, can greatly improve our ability to extract the information we want from our data – often by orders of magnitude. By this means we are forewarning the robot about a possible disturbing complication, putting it on the lookout for it; and the rules of probability theory then lead the robot to make the optimal allowance for it. This point is extremely important in some current problems of estimating environmental hazards or the safety of new machines, drugs or food additives, where inattention to all of the relevant prior information that scientists have about the phenomenon – and therefore failure to include that information in the model and prior probabilities – can cause the danger to be grossly overestimated or underestimated. For example, from knowledge of the engineering design of a machine, one knows a great deal about its possible failure modes and their consequences, that could not be obtained from any feasible amount of reliability testing by ‘random experiments’. Likewise, from knowledge of the chemical nature of a food additive, one knows a great deal about its physiological effects that could not be obtained from any feasible amount of mere toxicity tests. Of course, this is not to say that reliability tests and toxicity tests should not be carried out; the point is rather that random experiments are very inefficient ways of obtaining information (we learn, so to speak, only like the square root of the number of trials), and rational conclusions cannot be drawn from them unless the equally cogent – often far more cogent – prior information is also taken into account. We saw some examples of this phenomenon in Chapter 6, (6.123)–(6.144). The real function of the random experiment is to guard against completely unexpected bad effects, about which our prior information gave us no warning. 7.14 More general properties Although the Gauss derivation was of the greatest historical importance, it does not satisfy us today because it depends on intuition; why must the ‘best’ estimate of a location parameter be a linear function of the observations? Evidently, in view of the Gauss derivation, if our assigned sampling distribution is not Gaussian, the best estimate of the location parameter will not be the sample mean. It could have a wide variety of other functional forms; then, under what circumstances, is Laplace’s prescription the one to use? We have just seen the cogent pragmatic advantages of using a Gaussian sampling distribution. Today, anticipating a little from later chapters, we would say that its unique theoretical position derives not from the Gauss argument, but rather from four mathematical stability properties, which have fundamentally nothing to do with probability theory or inference, and a fifth, which has everything to do with them, but was not discovered until the mid-20th century: (A) Any smooth function with a single rounded maximum, if raised to higher and higher powers, goes into a Gaussian function. We saw this in Chapter 6. (B) The product of two Gaussian functions is another Gaussian function.

7 The central, Gaussian or normal distribution

221

(C) The convolution of two Gaussian functions is another Gaussian function. (D) The Fourier transform of a Gaussian function is another Gaussian function. (E) A Gaussian probability distribution has higher entropy than any other with the same variance; therefore any operation on a probability distribution which discards information, but conserves variance, leads us inexorably closer to a Gaussian. The central limit theorem, derived below, is the best known example of this, in which the operation being performed is convolution.

Properties (A) and (E) explain why a Gaussian form is approached more and more closely by various operations; properties (B), (C) and (D) explain why that form, once attained, is preserved. 7.15 Convolution of Gaussians The convolution property (C) is shown as follows. Expanding now the notation17 of (7.1) 1 ϕ(x − µ|σ ) ≡ ϕ σ

x −µ σ

#

=

# % w & (x − µ)2 1 w 2 exp − (x − µ) exp − = 2πσ 2 2σ 2 2π 2 (7.46)

in which we introduce the ‘weight’ w ≡ 1/σ 2 for convenience, the product of two such functions is

y − x − µ2 2 x − µ1 2 1 1 exp − + ; ϕ(x − µ1 |σ1 )ϕ(y − x − µ2 |σ2 ) = 2πσ1 σ2 2 σ1 σ2 (7.47) but we bring out the dependence on x by rearranging the quadratic form:

x − µ1 σ1

2 +

y − x − µ2 σ2

2 = (w1 + w2 )(x − xˆ )2 +

w1 w2 (y − µ1 − µ2 )2 , w1 + w2 (7.48)

where xˆ ≡ (w1 µ1 + w2 y − w2 µ2 )/(w1 + w2 ). The product is still a Gaussian with respect to x; on integrating out x we have the convolution law:

∞ −∞

dx ϕ(x − µ1 |σ1 )ϕ(y − x − µ2 |σ2 ) = ϕ(y − µ|σ ),

(7.49)

where µ ≡ µ1 + µ2 , σ 2 ≡ σ12 + σ22 . Two Gaussians convolve to make another Gaussian, the means µ and variances σ 2 being additive. Presently we shall see some important applications that require only the single convolution formula (7.49). Now we turn to the famous theorem, which results from repeated convolutions.

17

This notation is not quite inconsistent, since ϕ( ) and ϕ( | ) are different functional symbols.

222

Part I Principles and elementary applications

7.16 The central limit theorem The question whether non-Gaussian distributions also have parameters additive under convolution leads us to the notion of cumulants discussed in Appendix C. The reader who has not yet studied this should do so now.

Editor’s Exercise 7.5. Jaynes never actually derived the central limit theorem in this section; rather he is deriving the only known exception to the central limit theorem. In Appendix C he comes close to deriving the central limit theorem. Defining ∞ f (x) exp {iαx} , (7.50) φ(α) = −∞

and a repeated convolution gives h n (y) = f ∗ f ∗ f ∗ · · · ∗ f =

1 2π

∞

−∞

dyφ(y)n exp {−iαy} ,

α 2 C2 + ··· , [φ(α)] = exp n C0 + αC1 − 2 n

(7.51)

(7.52)

where the cumulants, Cn , are defined in Appendix C. If cumulants higher than C2 are ignored, one obtains nσ 2 α 2 − iαy , dα exp inαx − 2 −∞ ∞ nσ 2 α 2 1 exp {−iα(nx − y)} , (7.53) dα exp − = 2π −∞ 2 (y − nxx)2 1 = √ exp − , 2nσ 2 2πnσ 2 and this completes the derivation of the central limit theory. What are the conditions under which this is a good approximation? Is this derivation valid when one is computing the ratios of probabilities? 1 h n (y) ≈ 2π

∞

If the functions f i (x) to which we apply that theory are probability distributions, then they are necessarily non-negative and normalized: f i (x) ≥ 0, dx f i (x) = 1. Then the zeroth moments are all Z i = 1, and the Fourier transforms Fi (α) ≡

∞

−∞

dx f i (x) exp{iαx}

(7.54)

7 The central, Gaussian or normal distribution

223

are absolutely convergent for real α. Note that all this remains true if the f i are discontinuous, or contain delta-functions; therefore the following derivation will apply equally well to the continuous or discrete case or any mixture of them.18 Consider two variables to which are assigned probability distributions conditional on some information I: f 1 (x1 ) = p(x1 |I ),

f 2 (x2 ) = p(x2 |I ).

(7.55)

We want the probability distribution f (y) for the sum y = x1 + x2 . Evidently, the cumulative probability density for y is ∞ y−x1 dx1 f 1 (x1 ) dx2 f 2 (x2 ), (7.56) P(y ≤ y|I ) = −∞

−∞

where we integrated over the region R defined by (x1 + x2 ≤ y). Then the probability density for y is d P(y ≤ y|I ) = dx1 f 1 (x1 ) f 2 (y − x1 ), (7.57) f (y) = dy y=y just the convolution, denoted by f (y) = f 1 ∗ f 2 in Appendix C. Then the probability density for the variable z = y + x3 is (7.58) g(z) = dy f (y) f 3 (z − y) = f 1 ∗ f 2 ∗ f 3 and so on by induction: the probability density for the sum y = x1 + · · · + xn of n variables is the multiple convolution h n (y) = f 1 ∗ · · · ∗ f n . In Appendix C we found that convolution in the x space corresponds to simple multiplication in the Fourier transform space: introducing the characteristic function for f k (x) ∞ ϕk (α) ≡ exp{iαx} = dx f k (x) exp{iαx} (7.59) −∞

and the inverse Fourier transform 1 f k (x) = 2π

∞

−∞

dα ϕk (α) exp{−iαx},

we find that the probability density for the sum of n variables xi is 1 dα ϕ1 (α) · · · ϕn (α) exp{−iαq}, h n (q) = 2π or, if the probability distributions f i (x) are all the same, 1 dα [ϕ(α)]n exp{−iαq}. h n (q) = 2π 18

(7.60)

(7.61)

(7.62)

At this point, the reader who has been taught to distrust or disbelieve in delta-functions must unlearn that by reading Appendix B on the concept of a ‘function’. This is explained also by Lighthill (1957) and Dyson (1958). Without the free use of deltafunctions and other generalized functions, real applications of Fourier analysis are in an almost helpless, crippled condition compared with what can be done by using them.

224

Part I Principles and elementary applications

The probability density for the arithmetic mean x¯ = q/n is evidently, from (7.62), n dα [ϕ(α) exp{−iα x¯ }]n . (7.63) p(x¯ ) = nh n (n x¯ ) = 2π It is easy to prove that there is only one probability distribution with this property. If the probability distribution p(x|I ) for a single observation x has the characteristic function ϕ(α) = dx p(x|I ) exp{iαx}, (7.64) then the one for the average of n observations, x¯ = n −1 xi , has a characteristic function of the form ϕ n (n −1 α). The necessary and sufficient condition that x and x¯ have the same probability distribution is therefore that ϕ(α) satisfy the functional equation ϕ n (n −1 α) = ϕ(α). Now, substituting α = n −1 α, and recognizing that one dummy argument is as good as another, one obtains n log ϕ(α) = log ϕ(nα),

−∞ < α < ∞,

n = 1, 2, 3, . . . .

(7.65)

Evidently, this requires a linear relation on the positive real line: log ϕ(α) = Cα,

0 ≤ α < ∞,

(7.66)

where C is some complex number. Writing C = −k + iθ , the most general solution satisfying the reality condition ϕ(−α) = ϕ ∗ (α) is ϕ(α) = exp{iαθ − k|α|}, which yields 1 p(x|I ) = 2π

∞

−∞ < θ < ∞,

1 dα exp{−k|α|} exp{iα(θ − x)} = π −∞

0 < k < ∞,

(7.67)

k , k 2 + (x − θ )2

(7.68)

the Cauchy distribution with median θ, quartiles θ ± k. Now we turn to some important applications of the above mathematical results.

7.17 Accuracy of computations As a useful application of the central limit theorem, consider a computer programmer deciding on the accuracy to be used in a program. This is always a matter of compromise between misleading, inaccurate results on the one hand, and wasting computation facilities with more accuracy than needed on the other. Of course, it is better to err on the side of a little more accuracy than really needed. Nevertheless, it is foolish (and very common) to tie up a large facility with a huge computation to double precision (16 decimal places) or even higher, when the user has no use for anything like that accuracy in the final result. The computation might have been done in less time but with the same result on a desktop microcomputer, had it been programmed for an accuracy that is reasonable for the problem.

7 The central, Gaussian or normal distribution

225

Programmers can speed up and simplify their creations by heeding what the central limit theorem tells us. In probability calculations we seldom have any serious need for more than three-figure accuracy in our final results, so we shall be well on the safe side if we strive to get four-figure accuracy reliably in our computations. As a simple example, suppose we are computing the sum S≡

N

an

(7.69)

n=1

of N terms an , each one positive and of order unity. To achieve a given accuracy in the sum, what accuracy do we need in the individual terms? Our computation program or lookup table necessarily gives each an digitized to some smallest increment , so this will be actually the true value plus some error en . If we have an to six decimal digits, then = 10−6 ; if we have it to 16 binary digits, then = 2−16 = 1/65 536. The error in any one entry is in the range (−/2 < en ≤ /2), and in adding N such terms the maximum possible error is N /2. Then it might be thought that the programmer should ensure that this is acceptably small. But if N is large, this maximum error is enormously unlikely; this is just the point that Euler failed to see. The individual errors are almost certain to be positive and negative roughly equally often, giving √ a high degree of mutual cancellation, so that the net error should tend to grow only as N . The central limit theorem tells us what is essentially a simple combinatorial fact, that out of all conceivable error vectors {e1 , . . . , e N } that could be generated, the overwhelming √ majority have about the same degree of cancellation, which is the reason for the N rule. If we consider each individual error equally likely to be anywhere in (−/2, /2), this corresponds to a rectangular probability distribution on that interval, leading to an expected square error per datum of 1

/2

−/2

dx x 2 =

2 . 12

(7.70)

Then by the central limit theorem the probability distribution for the sum S will tend to a Gaussian with a variance N 2 /12, while S is approximately N . If N is large so that the central limit theorem is accurate, then the probability that the magnitude of the net error √ √ will exceed N , which is 12 = 3.46 standard deviations, is about 2[1 − (3.46)] 0.0006,

(7.71)

where (x) is the cumulative normal distribution. One will almost never observe an error that great. Since (2.58) = 0.995, there is about a 1% chance that the net error magnitude √ will exceed 0.74 N = 2.58 standard deviations. Therefore if we strive, not for certainty, but for 99% or greater probability, that our sum S is correct to four figures, this indicates the value of that can be tolerated in our algorithm

226

Part I Principles and elementary applications

√ or lookup table. We require 0.74 N ≤ 10−4 N , or √ ≤ 1.35 × 10−4 N .

(7.72)

The perhaps surprising result is that if we are adding N = 100 roughly equal terms, to achieve a virtual certainty of four-figure accuracy in the sum we require only three-figure accuracy in the individual terms! Under favorable conditions, the mutual cancellation phenomenon can be effective far beyond Euler’s dreams. Thus we can get by with a considerably shorter computation for the individual terms, or a smaller lookup table, than might be supposed. This simple calculation can be greatly generalized, as indicated by Exercise 7.5. But we note an important proviso to be investigated in Exercise 7.6; this holds only when the individual errors en are logically independent. Given in advance, if knowing e1 then tells us anything about any other en , then there are correlations in our probability assignment to errors, the central limit theorem no longer applies, and a different analysis is required. Fortunately, this is almost never a serious limitation in practice because the individual an are determined by some continuously variable algorithm and differ among themselves by amounts large compared with , making it impossible to determine any ei given any other e j . Exercise 7.6. Suppose that we are to evaluate a Fourier series S(θ ) = an sin nθ. Now the individual terms vary in magnitude and are themselves both positive and negative. In order to achieve four-figure accuracy in S(θ ) with high probability, what accuracy do we now require in the individual values of an and sin nθ ?

Exercise 7.7. Show that if there is a positive correlation in the probabilities assigned to the ei , then the error in the sum may be much greater than indicated by the central limit theorem. Try to make a more sophisticated probability analysis taking correlations into account, which would be helpful to a computer programmer who has some kind of information about mutual properties of errors leading to such correlations, but is still striving for the greatest efficiency for a given accuracy.

The literature of orthodox statistics contains some quite different recommendations than ours concerning accuracy of numerical calculations. For example, the textbook of McClave and Benson (1988, p. 99) considers calculation of a sample standard deviation s of n = 50 observations {x1 , . . . , xn } from that of s 2 = x 2 − x 2 . McClave and Benson state that: ‘You should retain twice as many decimal places in s 2 as you want in s. For example, if

7 The central, Gaussian or normal distribution

227

you want to calculate s to the nearest hundredth, you should calculate s 2 to the nearest ten-thousandth.’ When we studied calculus (admittedly many years ago) it was generally thought that small increments are related by δ(s 2 ) = 2sδs, or δs/s = (1/2)δ(s 2 )/s 2 . So, if s 2 is calculated to four significant figures, this determines s not to two significant figures, but to somewhat better than four. But, in any event, McClave and Benson’s practice of inserting a gratuitous extra factor n/(n − 1) in the symbol which they denote by ‘s 2 ’ makes a joke of any pretense of four-figure accuracy in either when n = 100.

7.18 Galton’s discovery The single convolution formula (7.49) led to one of the most important applications of probability theory in biology. Although from our present standpoint (7.49) is only a straightforward integration formula, which we may write for present purposes in the form ∞ dx ϕ(x|σ1 )ϕ(y − ax|σ2 ) = ϕ(y|σ ), (7.73) −∞

where we have made the scale changes x → ax, σ1 → aσ1 , and so now $ σ = a 2 σ12 + σ22 ,

(7.74)

it became in the hands of Francis Galton (1886) a major revelation about the mechanism of biological variation and stability.19 We use the conventional language of that time, which did not distinguish between the notions of probability and frequency, using the words interchangeably. But this is not a serious matter because his data were, in fact, frequencies, and, as we shall see in Chapter 9, strict application of probability theory as logic would then lead to probability distributions that are substantially equal to the frequency distributions (exactly equal in the limit where we have an arbitrarily large amount of frequency data and no other relevant prior information). Consider, for example, the frequency distribution of heights h of adult males in the population of England. Galton found that this could be represented fairly well by a Gaussian

h − µ dh (7.75) ϕ(h − µ|σ )dh = ϕ σ σ with µ = 68.1 inches, σ = 2.6 inches. Then he investigated whether children of tall parents tend to be tall, etc. To keep the number of variables equal to two, in spite of the fact that each person has two parents, he determined that the average height of men was about 1.08 times that of women, and defined a person’s ‘midparent’ as an imaginary being of height h mid ≡ 19

1 (h father + 1.08h mother ). 2

(7.76)

A photograph of Galton, with more details of his work and a short biographical sketch, may be found in Stigler (1986c). His autobiography (Galton, 1908) has additional details.

228

Part I Principles and elementary applications

He collected data on 928 adults born of 205 midparents and found, as expected, that children of tall parents do indeed tend to be tall, etc., but that children of tall parents still show a spread in heights, although less than the spread (±σ ) of the entire population. If the children of each selected group of parents still spread in height, why does the spread in height of the entire population not increase continually from one generation to the next? Because of the phenomenon of ‘reversion’; the children of tall parents tend to be taller than the average person, but less tall than their parents. Likewise, children of short parents are generally shorter than the average person, but taller than their parents. If the population as a whole is to be stable, this ‘systematic’ tendency to revert back to the mean of the entire population must exactly balance the ‘random’ tendency to spreading. Behind the smooth facade of a constant overall distribution of heights, an intricate little time-dependent game of selection, drift, and spreading is taking place constantly. In fact, Galton (with some help from mathematicians) could predict the necessary rate of reversion theoretically, and verify it from his data. If x ≡ (h − µ) is the deviation from the mean height of the midparents, let the population as a whole have a height distribution ϕ(x|σ1 ), while the sub-population of midparents of height (x + µ) tend to produce children of height (y + µ) with a frequency distribution ϕ[(y − ax)|σ2 ]. Then the height distribution of the next generation will be given by (7.73). If the population as a whole is to be stable, it is necessary that σ = σ1 , or the reversion rate must be a =± 1−

σ22 , σ12

(7.77)

which shows that a need not be positive; if tall parents tended to ‘compensate’ by producing unusually short children, this would bring about an alternation from one generation to the next, but there would still be equilibrium for the population as a whole. We see that equilibrium is not possible if |a| > 1; the population would explode. Although (7.73) is true for all a, equilibrium would then require σ22 < 0. The boundary of stability is reached at σ2 = 0, |a| = 1; then each sub-population breeds true, and whatever initial distribution of heights happened to exist would be maintained thereafter. An economist might call the condition a = 1 a ‘unit root’ situation; there is no reversion and no spreading.20 Of course, this analysis is in several obvious respects an oversimplified model of what happens in actual human societies. But that involves only touching up of details; Galton’s analysis was, historically, of the greatest importance in giving us a general understanding of the kind of processes at work. For this, its freedom from nonessential details was a major merit. 20

It is a currently popular theory among some economists that many economic processes, such as the stock market, are very close to the unit root behavior, so that the effects of momentary external perturbations like wars and droughts tend to persist instead of being corrected. There is no doubt that phenomena like this exist, at least in some cases; in the 1930s John Maynard Keynes noted what he called ‘the stickiness of prices and wages’. For a discussion of this from a Bayesian viewpoint, see Sims (1988).

7 The central, Gaussian or normal distribution

229

Exercise 7.8. Galton’s device of the midparent was only to reduce the computational burden, which would otherwise have been prohibitive in the 1880s, by reducing the problem to a two-variable one (midparent and children). But today computing power is so plentiful and cheap that one can easily analyze the real four-variable problem, in which the heights of father, mother, son, and daughter are all taken into account. Reformulate Galton’s problem to take advantage of this; what hypotheses about spreading and reversion might be considered and tested today? As a class project, one might collect new data (perhaps on faster-breeding creatures like fruit-flies) and write the computer program to analyze them and estimate the new spreading and reversion coefficients. Would you expect a similar program to apply to plants? Some have objected that this problem is too biological for a physics class, and too mathematical for a biology class; we suggest that, in a course dedicated to scientific inference in general, the class should include both physicists and biologists, working together.

Twenty years later this same phenomenon of selection, drift, and spreading underlying equilibrium was perceived independently by Einstein (1905a,b) in physics. The steady thermal Boltzmann distribution for molecules at temperature T to have energy E is exp{−E/kT }. Being exponential in energies E = u + (mv 2 /2), where u(x) is potential energy, this is Gaussian in particle velocities v. This generates a time-dependent drift in position; a particle which is at position x at time t = 0 has at time t the conditional probability to be at y of (y − x)2 p(y|xt) ∝ exp − 4Dt

(7.78)

from random drift alone, but this is countered by a steady drift effect of external forces F = −∇u, corresponding to Galton’s reversion rate. Although the details are quite different, Galton’s equation (7.77) is the logical equivalent of Einstein’s relation D = λkT connecting diffusion coefficient D, representing random spreading of particles, with the temperature T and the mobility λ (velocity per unit force) representing the systematic reversion rate counteracting the diffusion. Both express the condition for equilibrium as a balance between a ‘random spreading’ tendency, and a systematic counter-drift that holds it in check.

7.19 Population dynamics and Darwinian evolution Galton’s type of analysis can explain much more than biological equilibrium. Suppose the reversion rate does not satisfy (7.77). Then the height distribution in the population will not be static, but will change slowly. Or, if short people tend to have fewer children than do tall

230

Part I Principles and elementary applications

people, then the average height of the population will drift slowly upward.21 Do we have here the mechanism for Darwinian evolution? The question could hardly go unasked, since Francis Galton was a cousin of Charles Darwin. A new feature of probability theory has appeared here that is not evident in the works of Laplace and Gauss. Being astronomers, their interests were in learning facts of astronomy, and telescopes were only a tool toward that end. The vagaries of telescopes themselves were for them only ‘errors of observation’ whose effects were to be eliminated as much as possible; and so the sampling distribution was called by them an ‘error law’. But a telescope maker might see it differently. For him, the errors it produces are the objects of interest to study, and a star is only a convenient fixed object on which to focus his instrument for the purpose of determining those errors. Thus a given data set might serve two entirely different purposes; one man’s ‘noise’ is another man’s ‘signal’. But then, in any science, the ‘noise’ might prove to be not merely something to get rid of, but the essential phenomenon of interest. It seems curious (at least, to a physicist) that this was first seen clearly not in physics, but in biology. In the late 19th century many biologists saw it as the major task confronting them to confirm Darwin’s theory by exhibiting the detailed mechanism by which evolution takes place. For this purpose, the journal Biometrika was founded by Karl Pearson and Walter Frank Raphael Weldon, in 1901. It started (Volume 1, page 1) with an editorial setting forth the journal’s program, in which Weldon wrote: The starting point of Darwin’s theory of evolution is precisely the existence of those differences between individual members of a race or species which morphologists for the most part rightly neglect. The first condition necessary, in order that a process of Natural Selection may begin among a race, or species, is the existence of differences among its members; and the first step in an enquiry into the possible effect of a selective process upon any character of a race must be an estimate of the frequency with which individuals, exhibiting any degree of abnormality with respect to that character, occur.

Weldon had here reached a very important level of understanding. Morphologists, thinking rather like astronomers, considered individual variations as only ‘noise’ whose effects must be eliminated by averaging, in order to get at the significant ‘real’ properties of the species as a whole. Weldon, learning well from the example of Galton, saw it in just the opposite light; those individual variations are the engine that drives the process of evolutionary change, which will be reflected eventually in changes in the morphologists’ averages. Indeed, without individual variations, the mechanism of natural selection has nothing to operate on. So, to demonstrate the mechanism of evolution at its source, and not merely the final result, it is the frequency distribution of individual variations that must be studied. 21

It is well known that, in developed nations, the average height of the population has, in fact, drifted upward by a substantial amount in the past 200 years. This is commonly attributed to better nutrition in childhood; but it is worth noting that if tall people tended to have more or longer-lived children than did short people for sociological reasons, the same average drift in height would be observed, having nothing to do with nutrition. This would be true Darwinian evolution, powered by individual variations. It appears to us that more research is needed to decide on the real cause of this upward drift.

7 The central, Gaussian or normal distribution

231

Of course, at that time scientists had no conception of the physical mechanism of mutations induced by radioactivity (much less by errors in DNA replication), and they expected that evolution would be found to take place gradually, via nearly continuous changes.22 Nevertheless, the program of studying the individual variations would be the correct one to find the fundamental mechanism of evolution, whatever form it took. The scenario is somewhat like the following.

7.20 Evolution of humming-birds and flowers Consider a population of humming-birds in which the ‘noise’ consists of a distribution of different beak lengths. The survival of birds is largely a matter of finding enough food; a bird that finds itself with the mutation of an unusually long beak will be able to extract nectar from deeper flowers. If such flowers are available it will be able to nourish itself and its babies better than others because it has a food supply not available to other birds; so the long-beak mutation will survive and become a greater portion of the bird population, in more or less the way Darwin imagined. But this influence works in two directions; a bird is inadvertently fertilizing flowers by carrying a few grains of pollen from one to the next. A flower that happens to have the mutation of being unusually deep will find itself sought out preferentially by longbeaked birds because they need not compete with other birds for it. Therefore its pollen will be carried systematically to other flowers of the same species and mutation where it is effective, instead of being wasted on the wrong species. As the number of long-beaked birds increases, deep flowers thus have an increasing survival advantage, ensuring that their mutation is present in an increasing proportion of the flower population; this in turn gives a still greater advantage to long-beaked birds, and so on. We have a positive feedback situation. Over millions of years, this back-and-forth reinforcement of mutations goes through hundreds of cycles, resulting eventually in a symbiosis so specialized – a particular species of bird and a particular species of flower that seem designed specifically for each other – that it appears to be a miraculous proof of a guiding purpose in Nature, at least to those who do not think as deeply as did Darwin and Galton.23 Yet short-beaked birds do not die out, because birds patronizing deep flowers leave the shallow flowers for them. By itself, the process would tend to an equilibrium distribution of populations of short- and long-beaked birds, coupled to distributions of shallow and deep flowers. But if they breed 22

23

The necessity for evolution to be particulate (by discrete steps) was perceived later by several people, including Fisher (1930b). Evolutionary theory taking this into account, and discarding the Lamarckian notion of inheritance of acquired characteristics, is often called neo-Darwinism. However, the discrete steps are usually small, so Darwin’s notion of ‘gradualism’ remains quite good pragmatically. The unquestioned belief in such a purpose pervades even producers of biological research products who might be expected to know better. In 1993 there appeared in biological trade journals a full-page ad with a large color photograph of a feeding humming-bird and the text: ‘Specific purpose. The sharply curved bill of the white-tipped sickle-billed humming-bird is specifically adapted to probe the delicate tubular flowers of heliconia plants for the nectar on which the creature survives.’ Then this is twisted somehow into a plug for a particular brand of DNA polymerase – said to be produced for an equally specific purpose. This seems to us a dangerous line of argument; since the bird bills do not, in fact, have a specific purpose, what becomes of the alleged purpose of the polymerase?

232

Part I Principles and elementary applications

independently, over long periods other mutations will take place independently in the two types, and eventually they would be considered as belonging to two different species. As noted, the role of ‘noise’ as the mechanism driving a slow change in a system was perceived independently by Einstein (of course, he knew about Darwin’s theory, but we think it highly unlikely that he would have known about the work of Galton or Weldon in Switzerland in 1905). ‘Random’ thermal fluctuations caused by motion of individual atoms are not merely ‘noise’ to be averaged out in our predictions of mass behavior; they are the engine that drives irreversible processes in physics, and eventually brings about thermal equilibrium. Today this is expressed very specifically in the many ‘fluctuation-dissipation theorems’ of statistical mechanics, which we derive in generality from the maximum entropy principle in Chapter 11. They generalize the results of Galton and Einstein. The aforementioned Nyquist fluctuation law was, historically, the first such theorem to be discovered in physics. The visions of Weldon and Einstein represented such a major advance in thinking that today, some 100 years later, many have not yet comprehended them or appreciated their significance in either biology or physics. We still have biologists24 who try to account for evolution by a quite unnecessary appeal to the second law of thermodynamics, and physicists25 who try to account for the second law by appealing to quite unnecessary modifications in the equations of motion. The operative mechanism of evolution is surely Darwin’s original principle of natural selection, and any effects of the second law can only hinder it.26 Natural selection is a process entirely different from the second law of thermodynamics. The purposeful intervention of man can suspend or reverse natural selection – as we observe in wars, medical practice, and dog breeding – but it can hardly affect the second law. Furthermore, as Stephen J. Gould has emphasized, the second law always follows the same course, but evolution in Nature does not. Whether a given mutation makes a creature better adapted or less adapted to its environment depends on the environment. A mutation that causes a creature to lose body heat more rapidly would be beneficial in Brazil but fatal in Finland; and so the same actual sequence of mutations can result in entirely different 24

25

26

For example, see Weber, Depew and Smith (1988). Here the trouble is that the second law of thermodynamics goes in the wrong direction; if the second law were the driving principle, evolution would proceed inexorably back to the primordial soup, which has a much higher entropy than would any collection of living creatures that might be made from the same atoms. This is easily seen as follows. What is the difference between a gram of living matter and a gram of primordial soup made of the same atoms? Evidently, it is that the living matter is far from thermal equilibrium, and it is obeying thousands of additional constraints on the possible reactions and spatial distribution of atoms (from cell walls, osmotic pressures, etc.) that the primordial soup is not obeying. But removing a constraint always has the effect of making a larger phase space available, thus increasing the entropy. The primordial soup represents the thermal equilibrium, resulting from removal of all the biological constraints; indeed, our present chemical thermodynamics is based on (derivable from) the Gibbs principle that thermal equilibrium is the macrostate of maximum entropy subject to only the physical constraints (energy, volume, mole numbers). Several writers have thought that Liouville’s theorem (conservation of phase volume in classical mechanics or unitarity of time development in quantum theory) is in conflict with the second law. On the contrary, in Jaynes (1963b, 1965) we demonstrate that, far from being in conflict, the second law is an immediate elementary consequence of Liouville’s theorem, and in Jaynes (1989) we give a simple application of this to biology: calculation of the maximum theoretical efficiency of a muscle. This is not to say that natural selection is the only process at work; random drift is still an operative cause of evolution with or without subsequent selection. Presumably, this is the reason for the fantastic color patterns of such birds as parrots, which surely have no survival value; the black bird is even more successful at surviving. For an extensive discussion of the evidence and later research efforts by many experts, see the massive three-volume work Evolution After Darwin (Tax, 1960) produced to mark the centenary of the publication of Darwin’s Origin of Species, or the more informal work of Dawkins (1987).

7 The central, Gaussian or normal distribution

233

creatures in different environments – each appearing to be adapting purposefully to its surroundings. 7.21 Application to economics The remarkable – almost exact – analogy between the processes that bring about equilibrium in physics and in biology surely has other important implications, particularly for theories of equilibrium and stability in economics, not yet exploited. It seems likely, for example, that the ‘turbulence’ of individual variations in economic behavior is the engine that drives macroeconomic change in the direction of the equilibrium envisaged by Adam Smith. The existence of this turbulence was recognized by John Maynard Keynes (1936), who called it ‘animal spirits’ which cause people to behave erratically; but he did not see in this the actual cause that prevents stagnation and keeps the economy on the move. In the next level of understanding we see that Adam Smith’s equilibrium is never actually attained in the real world because of what a physicist would call ‘external perturbations’, and what an economist would call ‘exogenous variables’ which vary on the same time scale. That is, wars, droughts, taxes, tariffs, bank reserve requirements, discount rates and other disturbances come and go on about the same time scale as would the approach to equilibrium in a perfectly ‘calm’ society. The effect of small disturbances may be far greater than one might expect merely from the ‘unit root’ hypothesis noted above. If small individual decisions (like whether to buy a new car or open a savings account instead) take place √ independently, their effects on the macroeconomy should average out according to the N rule, to show only small ripples with no discernible periodicity. But seemingly slight influences (like a month of bad weather or a 1% change in the interest rate) might persuade many to do this a little sooner or later than they would otherwise. That is, a very slight influence may be able to pull many seemingly independent agents into phase with each other so they generate large organized waves instead of small ripples. Such a phase-locked wave, once started, can itself become a major influence on other individual decisions (of buyers, retailers, and manufacturers), and if these secondary influences are in the proper phase with the original ones, we could have a positive feedback situation; the wave may grow and perpetuate itself by mutual reinforcement, as did the humming-birds and flowers. Thus, one can see why a macroeconomy may be inherently unstable for reasons that have nothing to do with capitalism or socialism. Classical equilibrium theory may fail not just because there is no ‘restoring force’ to bring the system back to equilibrium; relatively small fortuitous events may set up a big wave that goes instead into an oscillating limit cycle – perhaps we are seeing this in business cycles. To stop the oscillations and move back toward the equilibrium predicted by classical theory, the macroeconomy would be dependent on the erratic behavior of individual people, spreading the phases out again. Contrarians may be necessary for a stable economy! As we see it, these are the basic reasons why economic data are very difficult to interpret; even if relevant and believable data were easy to gather, the rules of the game and the

234

Part I Principles and elementary applications

conditions of play are changing constantly. But we think that important progress can still be made by exploiting what is now known about entropy and probability theory as tools of logic. In particular, the conditions for instability should be predictable from this kind of analysis, just as they are in physics, meteorology, and engineering. A very wise government might be able to make and enforce regulations that prevent phase locking – just as it now prevents wild swings in the stock market by suspending trading. We are not about to run out of important things to do in theoretical economics.

7.22 The great inequality of Jupiter and Saturn An outstanding problem for 18th century science was noted by Edmund Halley in 1676. Observation showed that the mean motion of Jupiter (30.35 deg/yr) was slowly accelerating, that of Saturn (12.22 deg/yr) decelerating. But this was not just a curiosity for astronomers; it meant that Jupiter was drifting closer to the Sun, Saturn farther away. If this trend were to continue indefinitely, then eventually Jupiter would fall into the Sun, carrying with it the Earth and all the other inner planets. This seemed to prophesy the end of the world – and in a manner strikingly like the prophesies of the Bible. Understandably, this situation was of more than ordinary interest, and to more people than astronomers. Its resolution called forth some of the greatest mathematical efforts of 18th century savants, either to confirm the coming end; or preferably to show how the Newtonian laws would eventually put a stop to the drift of Jupiter and save us. Euler, Lagrange, and Lambert made heroic attacks on the problem without solving it. We noted above how Euler was stopped by a mass of overdetermined equations; 75 simultaneous but inconsistent equations for eight unknown orbital parameters. If the equations were all consistent, he could choose any eight of them and solve (this would still involve inversion of an 8 × 8 matrix), and the result would be the same whatever eight he chose. But the observations all had unknown errors of measurement, and so there were

75 (7.79) 1.69 × 1010 8 possible choices; i.e. over 16 billion different sets of estimates for the parameters, with apparently nothing to choose between them.27 At this point, Euler managed to extract reasonably good estimates of two of the unknowns (already an advance over previous knowledge), and simply gave up on the others. For this work (Euler, 1749), he won the French Academy of Sciences prize. The problem was finally solved in 1787 by one who was born that same year. Laplace (1749–1827) ‘saved the world’ by using probability theory to estimate the parameters accurately enough to show that the drift of Jupiter was not secular after all; the observations 27

Our algorithm for this in Chapter 19, Eqs. (19.24) and (19.37), actually calculates a weighted average over all these billions of estimates; but in a manner so efficient that one is unaware that all this is happening. What probability theory determines for us – and what Euler and Daniel Bernoulli never comprehended – is the optimal weighting coefficients in this average, leading to the greatest possible reliability for the estimate and the accuracy claims.

7 The central, Gaussian or normal distribution

235

at hand had covered only a fraction of a cycle of an oscillation with a period of about 880 years. This is caused by an ‘accidental’ near resonance in their orbital periods: 2 × (period of Saturn) 5 × (period of Jupiter).

(7.80)

Indeed, from the above mean motion data we have 2×

360 = 58.92 yr, 12.22

5×

360 = 59.32 yr. 30.35

(7.81)

In the time of Halley, their difference was only about 0.66% and decreasing. So, long before it became a danger to us, Jupiter indeed reversed its drift – just as Laplace had predicted – and it is returning to its old orbit. Presumably, Jupiter and Saturn have repeated this seesaw game several million times since the solar system was formed. The first half-cycle of this oscillation to be observed by man will be completed in about the year 2012. 7.23 Resolution of distributions into Gaussians The tendency of probability distributions to gravitate to the Gaussian form suggests that we might view the appearance of a Gaussian, or ‘normal’, frequency distribution as loose evidence (but far from proof) that some kind of equilibrium has been reached. This view is also consistent with (but by no means required by) the results of Galton and Einstein. In the first attempts to apply probability theory in the biological and social sciences (for example, Quetelet, 1835, 1869), serious errors were made through supposing firstly that the appearance of a normal distribution in data indicates that one is sampling from a homogeneous population, and secondly that any departure from normality indicates an inhomogeneity in need of explanation. By resolving a non-normal distribution into Gaussians, Quetelet thought that one would be discovering the different sub-species, or varieties, that were present in the population. If this were true reliably, we would indeed have a powerful tool for research in many different fields. But later study showed that the situation is not that simple. We have just seen how one aspect of it was corrected finally by Galton (1886), in showing that a normal frequency distribution by no means proves homogeneity; from (7.73), a Gaussian of width σ can arise inhomogeneously – and in many different ways – from the overlapping of narrower Gaussian distributions of various widths σ1 , σ2 . But those subpopulations are in general merely mathematical artifacts like the sine waves in a Fourier transform; they have no individual significance for the phenomenon unless one can show that a particular set of subpopulations has a real existence and plays a real part in the mechanism underlying stability and change. Galton was able to show this from his data by measuring those widths. The second assumption, that non-normal distributions can be resolved into Gaussian subdistributions, turns out to be not actually wrong (except in a nitpicking mathematical sense); but without extra prior information it is ambiguous in what it tells us about the phenomenon.

236

Part I Principles and elementary applications

We have here an interesting problem, with many useful applications: is a non-Gaussian distribution explainable as a mixture of Gaussian ones? Put mathematically, if an observed data histogram is well described by a distribution g(y), can we find a mixing function f (x) ≥ 0 such that g(y) is seen as a mixture of Gaussians: dx ϕ(y − x|σ ) f (x) = g(y), −∞ ≤ y ≤ ∞. (7.82) Neither Quetelet nor Galton was able to solve this problem, and today we understand why. Mathematically, does this integral equation have solutions, or unique solutions? It appears from (7.73) that we cannot expect unique solutions in general, for, in the case of Gaussian g(y), many different mixtures (many different choices of a, σ1 , σ2 ) will all lead to the same g(y). But perhaps if we specify the width σ of the Gaussian kernel in (7.82) there is a unique solution for f (x). Solution of such integral equations is rather subtle mathematically. We give two arguments: the first depends on the properties of Hermite polynomials and yields a class of exact solutions; the second appeals to Fourier transforms and yields an understanding of the more general situation.

7.24 Hermite polynomial solutions The rescaled Hermite polynomials Rn (x) may be defined by the displacement of a Gaussian distribution ϕ(x), which gives the generating function ∞ an ϕ(x − a) = exp{xa − a 2 /2} = Rn (x) , ϕ(x) n! n=0

or, solving for Rn , we have the Rodriguez form dn dn = (−1)n exp{x 2 /2} n exp{−x 2 /2}. Rn (x) = n exp{xa − a 2 /2} a=0 da dx

(7.83)

(7.84)

The first few of these polynomials are: R0 = 1, R1 = x, R2 = x 2 − 1, R3 = x 3 − 3x, R4 = + 3. The conventional Hermite polynomials Hn (x) differ only in scaling: Hn (x) = x 4 − 6x 2 √ 2n/2 Rn (x 2). Multiplying (7.83) by ϕ(x) exp{xb − b2 /2} and integrating out x, we have the orthogonality relation ∞ dx Rm (x)Rn (x)ϕ(x) = n!δmn , (7.85) −∞

and in consequence these polynomials have the remarkable property that convolution with a Gaussian function reduces simply to ∞ dx ϕ(y − x)Rn (x) = y n . (7.86) −∞

7 The central, Gaussian or normal distribution

Therefore, if g(y) is represented by a power series, an y n , g(y) =

237

(7.87)

n

we have immediately a formal solution of (7.82): x . an σ n R n f (x) = σ n

(7.88)

Since the coefficient of x n in Rn (x) is unity, the expansions (7.87) and (7.88) converge equally well. So, if g(y) is any polynomial or entire function (i.e. one representable by a power series (7.87) with infinite radius of convergence), the integral equation has the unique solution (7.88). We can see the solution (7.88) a little more explicitly if we invoke the expansion of Rn , deducible from (7.83) by expanding exp{xa − a 2 /2} in a power series in x: Rn

x σ

=

M

(−1)m

m=0

x n−2m n! , − 2m)! σ

2m m! (n

(7.89)

where M = (n − 1)/2 if n is odd, M = n/2 if n is even. Then, noting that x n−2m d2m n! = σ 2m−n 2m x n , (n − 2m)! σ dx

(7.90)

we have the formal expansion f (x) =

∞ σ 2 d2 g(x) σ 4 d4 g(x) (−1)m σ 2m d2m g(x) = g(x) − + − ···. 2m m! dx 2m 2 dx 2 8 dx 4 m=0

(7.91)

An analytic function is differentiable any number of times, and if g(x) is an entire function this will converge to the unique solution. If g(x) is a very smooth function, it converges very rapidly, so the first two or three terms of (7.91) are already a good approximation to the solution. This gives us some insight into the workings of the integral equation; as σ → 0, the solution (7.91) relaxes into f (x) → g(x), as it should. The first two terms of (7.91) are what would be called, in image reconstruction, ‘edge detection’; for small σ the solution goes into this. The larger σ , the more the higher-order derivatives matter; that is, the more fine details of the structure of g(y) contribute to the solution. Intuitively, the broader the Gaussian kernel, the more difficult it is to represent fine structure of g(y) in terms of that kernel. Evidently, we could continue this line of thought with much more analytical work, and it might seem that the problem is all but solved; but now the subtlety starts. Solutions like (7.88) and (7.91), although formally correct in a mathematical sense, ignore some facts of the real world; is f (x) non-negative when g(y) is? Is the solution stable, a small change in g(y) inducing only a small change in f (x)? What if g(x) is not an entire function but is piecewise continuous; for example, rectangular?

238

Part I Principles and elementary applications

7.25 Fourier transform relations For some insight into these questions, let us look at the integral equation from the Fourier transform viewpoint. Taking the transform of (7.82) according to ∞ dx f (x) exp{ikx}, (7.92) F(k) ≡ −∞

(7.82) reduces to

2 2 k σ F(k) = G(k), exp − 2

(7.93)

which illustrates that the Fourier transform of a Gaussian function is another Gaussian function, and shows us at once the difficulty of finding more general solutions than (7.88). If g(y) is piecewise continuous, then, as k → ∞, from the Riemann–Lebesgue lemma G(k) will fall off only as 1/k. Then F(k) must blow up violently, like exp{+k 2 σ 2 /2}/k, and one shudders to think what the function f (x) must look like (infinitely violent oscillations of infinitely high frequency?) If g(y) is continuous, but has discontinuous first derivatives like a triangular distribution, then G(k) falls off as k −2 , and we are in a situation about as bad. Evidently, if g(y) has a discontinuity in any derivative, there is no solution f (x) that would be acceptable in the physical problem. This is evident also from (7.91); the formal solution would degenerate into infinitely high derivatives of a delta-function. In order that we can interpret g(y) as a mixture of possible Gaussians, f (x) must be nonnegative. But we must allow the possibility that the f (x) sought is a sum of delta-functions; indeed, to resolve g(y) into a discrete mixture of Gaussians g(y) = a j ϕ(x − x j ) was the real goal of Quetelet and Galton. If this could be achieved uniquely, their interpretation might be valid. Then F(k) does not fall off at all as k → ±∞, so G(k) must fall off as exp{−k 2 σ 2 /2}. In short, in order to be resolvable into Gaussians of width σ with positive mixture function f (x), the function g(y) must itself be at least as smooth as a Gaussian of width σ . This is a formal difficulty. There is a more serious practical difficulty. If g(y) is a function determined only empirically, we do not have it in the form of an analytic function; we have only a finite number of approximate values gi at discrete points yi . We can find many analytic functions which appear to be good approximations to the empirical one. But because of the instability evident in (7.88) and (7.91) they will lead to greatly different final results f (x). Without a stability property and a criterion for choosing that smooth function, we really have no definite solution in the sense of inversion of an integral equation.28 In other words, finding the appropriate mixture f (x) to account for an empirically determined distribution g(y) is not a conventional mathematical problem of inversion; it is itself a problem of inference, requiring the apparatus of probability theory. In this way, a problem in probability theory can generate a hierarchy of subproblems, each involving probability theory again but on a different level. 28

For other discussions of the problem, see Andrews and Mallows (1974) and Titterington, Smith and Makov (1985).

7 The central, Gaussian or normal distribution

239

7.26 There is hope after all Following up the idea in Section 7.2.5, the original goal of Quetelet has now been very nearly realized by analysis of the integral equation as a problem of Bayesian inference instead of mathematical inversion; and useful examples of analysis of real data by this have now been found. Sivia and Carlile (1992) report the successful resolution of noisy data into as many as nine different Gaussian components, representing molecular excitation lines, by a Bayesian computer program.29 It is hardly surprising that Quetelet and Galton could not solve this problem in the 19th century; but it is very surprising that today many scientists, engineers, and mathematicians still fail to see the distinction between inversion and inference, and struggle with problems like this that have no deductive solutions, only inferential ones. The problem is, however, very common in current applications; it is known as a ‘generalized inverse’ problem, and today we can give unique and useful inferential solutions to such problems by specifying the (essential, but hitherto unmentioned) prior information to be used, converting an ill-posed problem into a straightforward Bayesian exercise. This suggests another interesting mathematical problem; for a given entire function g(y), over what range of σ is the solution (7.88) non-negative? There are some evident clues: when σ → 0, we have ϕ(x − y|σ ) → δ(x − y) and so, as noted above, f (x) → g(x); so, for σ sufficiently small, f (x) will be non-negative if g(y) is. But when σ → ∞ the Gaussians in (7.82) become very broad and smooth; so, if f (x) is non-negative, the integral in (7.82) must be at least as broad. Thus, when g(y) has detailed structure on a scale smaller than σ , there can be no solution with non-negative f (x); and it is not obvious whether there can be any solution at all.

Exercise 7.9. From the above arguments one would conjecture that there will be some upper bound σmax such that the solution f (x) is non-negative when and only when 0 ≤ σ < σmax . It will be some functional σmax [g(y)] of g(y). Prove or disprove this conjecture; if it is true, give a verbal argument by which we could have seen this without calculation; if it is false, give a specific counter-example showing why. Hint. It appears that (7.91) might be useful in this endeavor.

29

We noted in Chapter 1 that most of the computer programs used in this field are only intuitive ad hoc devices that make no use of the principles of probability theory; therefore in general they are usable in some restricted domain, but they fail to extract all the relevant information from the data and are subject to both the errors of hallucination and blunt perception. One commercial program for resolution into Gaussians or other functions simply reverts to empirical curve fitting. It is advertised (Scientific Computing, July 1993, p. 15) with a provocative message, which depicts two scientists with the same data curve showing two peaks; by hand drawing one could resolve it very crudely into two Gaussians. The ad proclaims: ‘Dr Smith found two peaks. . . . Using [our program] Dr Jones found three peaks . . .’. Guess who got the grant? We are encouraged to think that we can extract money from the Government by first allowing the software company to extract $500 from us for this program, whose output would indeed be tolerable for noiseless data. But it would surely degenerate quickly into dangerous, unstable nonsense as the noise level increases. The problem is not, basically, one of inversion or curve fitting; it is a problem of inference. A Bayesian inference program like those of Bretthorst (1988) will continue to return the best resolution possible from the data and the model, without instability, whatever the noise level. If the noise level becomes so high as to make the data useless, the Bayesian estimates just relax back into the prior estimates, as they should.

240

Part I Principles and elementary applications

This suggests that the original goal of Quetelet and Galton was ambiguous; any sufficiently smooth non-Gaussian distribution may be generated by many different superpositions of different Gaussians of different widths. Therefore a given set of subpopulations, even if found mathematically, would have little biological significance unless there were additional prior information pointing to Gaussians of that particular width σ as having a ‘real’ existence and playing some active role in the phenomena. Of course, this caveat applies equally to the aforementioned Bayesian solution; but Sivia and Carlile did have that prior information. 7.27 Comments 7.27.1 Terminology again As we are obliged to point out so often, this field seems to be cursed more than any other with bad and misleading terminology which seems impossible to eradicate. The electrical engineers have solved this problem very effectively; every few years, an official committee issues a revised standard terminology, which is then enforced by editors of their journals (witness the meek acceptance of the change from ‘megacycles’ to ‘megahertz’ which was accomplished almost overnight a few years ago). In probability theory there is no central authority with the power to bring about dozens of needed reforms, and it would be self-defeating for any one author to try to do this by himself; he would only turn away readers. But we can offer tentative suggestions in the hope that others may see merit in them. The literature gives conflicting evidence about the origin of the term ‘normal distribution’. Karl Pearson (1920) claimed to have introduced it ‘many years ago’, in order to avoid an old dispute over priority between Gauss and Legendre; but he gives no reference. Hilary Seal (1967) attributes it instead to Galton; but again fails to give a reference, so it would require a new historical study to decide this. However, the term had long been associated with the general topic: given a linear model y = Xβ + e, where the vector y and the matrix X are known, the vector of parameters β and the noise vector e unknown, Gauss (1823) called the system of equations X X βˆ = X y, which give the least squares parameter estimates ˆ the ‘normal equations’, and the ellipsoid of constant probability density was called the β, ‘normal surface’. It appears that somehow the name was transferred from the equations to the sampling distribution that leads to those equations. Presumably, Gauss meant ‘normal’ in its mathematical sense of ‘perpendicular’, expressing the geometric meaning of those equations. The minimum distance from a point (the estimate) to a plane (the constraint) is the length of the perpendicular. But, as Pearson himself observes, the term ‘normal distribution’ is a bad one because the common colloquial meaning of ‘normal’ is standard or sane, implying a value judgment. This leads many to think – consciously or subconsciously – that all other distributions are in some way abnormal. Actually, it is quite the other way; it is the so-called ‘normal’ distribution that is abnormal in the sense that it has many unique properties not possessed by any other. Almost all of our

7 The central, Gaussian or normal distribution

241

experience in inference has been with this abnormal distribution, and much of the folklore that we must counter here was acquired as a result. For decades, workers in statistical inference have been misled, by that abnormal experience, into thinking that methods such as confidence intervals, that happen to work satisfactorily with this distribution, should work as well with others. The alternative name ‘Gaussian distribution’ is equally bad for a different reason, although there is no mystery about its origin. Stigler (1980) sees it as a general law of eponymy that no discovery is named for its original discoverer. Our terminology is in excellent compliance with this law, since the fundamental nature of this distribution and its main properties were noted by Laplace when Gauss was six years old; and the distribution itself had been found by de Moivre before Laplace was born. But, as we noted, the distribution became popularized by the work of Gauss (1809), who gave a derivation of it that was simpler than previous ones and seemed very compelling intuitively at the time. This is the derivation that we gave above, Eq. (7.16), and which resulted in his name becoming attached to it. The term ‘central distribution’ would avoid both of these objections while conveying a correct impression; it is the final ‘stable’ or ‘equilibrium’ distribution toward which all others gravitate under a wide variety of operations (large number limit, convolution, stochastic transformation, etc.), and which, once attained, is maintained through an even greater variety of transformations, some of which are still unknown to statisticians because they have not yet come up in their problems. For example, in the 1870s Ludwig Boltzmann gave a compelling, although heuristic, argument indicating that collisions in a gas tend to bring about a ‘Maxwellian’, or Gaussian, frequency distribution for velocities. Then Kennard (1938, Chap. 3) showed that this distribution, once attained, is maintained automatically, without any help from collisions, as the molecules move about, constantly changing their velocities, in any conservative force field (that is, forces f (x) derivable from a potential φ(x) by gradients: f (x) = −∇φ(x)). Thus, this distribution has stability properties considerably beyond anything yet utilized by statisticians, or yet demonstrated in the present work. While venturing to use the term ‘central distribution’ in a cautious, tentative way, we continue to use also the bad but traditional terms, preferring ‘Gaussian’ for two reasons. Ancient questions of priority are no longer of interest; far more important today, ‘Gaussian’ does not imply any value judgment. Use of emotionally loaded terms appears to us a major cause of the confusion in this field, causing workers to adhere to principles with noble-sounding names like ‘unbiased’ or ‘admissible’ or ‘uniformly most powerful’, in spite of the nonsensical results they can yield in practice. But also, we are writing for an audience that includes both statisticians and scientists. Everybody understands what ‘Gaussian distribution’ means; but only statisticians are familiar with the term ‘normal distribution’. The fundamental Boltzmann distribution of statistical mechanics, exponential in energies, is of course Gaussian or Maxwellian in particle velocities. The general central tendency of probability distributions toward this final form is now seen as a consequence of their maximum entropy properties (Chapter 11). If a probability distribution is subjected to some

242

Part I Principles and elementary applications

transformation that discards information but leaves certain quantities invariant, then, under very general conditions, if the transformation is repeated, the distribution tends to the one with maximum entropy, subject to the constraints of those conserved quantities. This brings us to the term ‘central limit theorem’, which we have derived as a special case of the phenomenon just noted – the behavior of probability distributions under repeated convolutions, which conserve first and second moments. This name was introduced by George P´olya (1920), with the intention that the adjective ‘central’ was to modify the noun ‘theorem’; i.e. it is the limit theorem which is central to probability theory. Almost universally, students today think that ‘central’ modifies ‘limit’, so that it is instead a theorem about a ‘central limit’, whatever that means.30 In view of the equilibrium phenomenon, it appears that P´olya’s choice of words was after all fortunate in a way that he did not foresee. Our suggested terminology takes advantage of this; looked at in this way, the terms ‘central distribution’ and ‘central limit theorem’ both convey the right connotations to one hearing them for the first time. One can read ‘central limit’ as meaning a limit toward a central distribution, and will be invoking just the right intuitive picture.

30

¨ The confusion does not occur in the original German, where P´olya’s words were: Uber den zentralen Grenzwertsatz der Wahrscheinlichkeitsrechnung, an interesting example where the German habit of inventing compound words removes an ambiguity in the literal English rendering.

8 Sufficiency, ancillarity, and all that

In the preceding five chapters we have examined the use of probability theory in problems that, although technically elementary, illustrated a fairly good sample of typical current applications. Now we are in a position to look back over these examples and note some interesting features that they have brought to light. It is useful to understand these features, for tactical reasons. Many times in the past when one tried to conduct inference by applying intuitive ad hoc devices instead of probability theory, they would not work acceptably unless some special circumstances were present, and others absent. Thus they were of major theoretical importance in orthodox statistics. None of the material of the present chapter, however, is really needed in our applications; for us, these are incidental details that take care of themselves as long as we obey the rules. That is, if we merely apply the rules derived in Chapter 2, strictly and consistently in every problem, they lead us to do the right thing and arrive at the optimal inferences for that problem automatically, without our having to take any special note of these things. For us, they have rather a ‘general cultural value’ in helping us to understand better the inner workings of probability theory. One can see much more clearly why it is necessary to obey the Chapter 2 rules, and the predictable consequences of failure to do so. 8.1 Sufficiency In our examples of parameter estimation, probability theory sometimes does not seem to use all the data that we offer it. In Chapter 6, when we estimated the parameter θ of a binomial distribution from data on n trials, the posterior pdf for θ depended on the data only through the number n of trials and the number r of successes; all information about the order in which success and failure occurred was ignored. With a rectangular sampling distribution in α ≤ x ≤ β, the joint posterior pdf for α, β used only the extreme data values (xmin , xmax ) and ignored the intermediate data. Likewise, in Chapter 7, with a Gaussian sampling distribution and a data set D ≡ {x1 , . . . , xn }, the posterior pdf for the parameters µ, σ depended on the data only through n and their first two moments (x¯ , x 2 ). The (n − 2) other properties of the data convey a great deal of additional information of some kind; yet our use of probability theory ignored them. 243

244

Part 1 Principles and elementary applications

Is probability theory failing to do all it could here? No, the proofs of Chapter 2 have precluded that possibility; the rules being used are the only ones that can yield unique answers while agreeing with the qualitative desiderata of rationality and consistency. It seems, then, that the unused parts of the data must be irrelevant to the question we are asking.1 But can probability theory itself confirm this conjecture for us in a more direct way? This introduces us to a quite subtle theoretical point about inference. Special cases of the phenomenon were noted by Laplace (1812, 1824 edn, Supp. V). It was generalized and given its present name 100 years later by Fisher (1922), and its significance for Bayesian inference was noted by H. Jeffreys (1939). Additional understanding of its role in inference was achieved only recently, in the resolution of the ‘marginalization paradox’ discussed in Chapter 15. If certain aspects of the data are not used when they are known, then presumably it would not matter (we should come to the same final conclusion) if they were unknown. Thus, if the posterior pdf for a parameter θ is found to depend on the data D = {x1 , . . . , xn } only through a function r (x1 , . . . , xn ) (call it ‘property R’), then it seems plausible that given r alone we should be able to draw the same inferences about θ. This would confirm that the unused parts of the data were indeed irrelevant in the sense just conjectured. With a sampling density function p(x1 . . . xn |θ) and prior p(θ |I ) = f (θ), the posterior pdf using all the data is p(θ|D I ) = h(θ|D) =

f (θ) p(x1 . . . xn |θ ) . dθ f (θ ) p(x1 . . . xn |θ )

(8.1)

Note that we are not assuming independent or exchangeable sampling here; the sampling pdf need not factor in the form p(x1 . . . xn |θ) = i p(xi |θ ) and the marginal probabilities p(xi |θ) = ki (xi , θ ) and p(x j |θ) = k j (x j , θ) need not be the same function. Now carry out a change of variables (x1 , . . . , xn ) → (y1 , . . . , yn ) in the sample space Sx , such that y1 = r (x1 , . . . , xn ), and choose (y2 , . . . , yn ) so that the Jacobian J=

∂(y1 , . . . , yn ) ∂(x1 , . . . , xn )

(8.2)

is bounded and nonvanishing everywhere on Sx . Then the change of variables is a 1:1 mapping of Sx onto Sy , and the sampling density g(y1 , . . . , yn |θ) = J −1 p(x1 . . . xn |θ )

(8.3)

may be used just as well as p(x1 . . . xn |θ) in the posterior pdf: h(θ|D) =

f (θ)g(y1 , . . . , yn |θ ) dθ f (θ )g(y1 , . . . , yn |θ )

(8.4)

since the Jacobian, being independent of θ, cancels out. Then property R is the statement that for all θ ∈ Sθ , (8.4) is independent of (y2 , . . . , yn ). Writing this condition out as derivatives set to zero, we find that it defines a set of n − 1 1

Of course, when we say that some information is ‘irrelevant’ we mean only that we don’t need it for our present purpose; it might be crucially important for some other purpose that we shall have tomorrow.

8 Sufficiency, ancillarity, and all that

245

simultaneous integral equations (actually, only orthogonality conditions) that the prior f (θ) must satisfy: θ ∈ Sθ dθ K i (θ, θ ) f (θ ) = 0 , (8.5) 2≤i ≤n Sθ where the ith kernel is K i (θ, θ ) ≡ g(y|θ)

∂g(y|θ ) ∂g(y|θ ) − g(y|θ ) , ∂ yi ∂ yi

(8.6)

and we used the abbreviation y ≡ (y1 , . . . , yn ), etc. It is antisymmetric: K i (θ, θ ) = −K i (θ , θ). 8.2 Fisher sufficiency If (8.5) holds only for some particular prior f (θ), then K i (θ, θ ) need not vanish; in its dependence on θ it needs only to be orthogonal to that particular function. But if (8.5) is to hold for all f (θ), as Fisher (1922) required by implication – by failing to mention f (θ ) – then K i (θ, θ ) must be orthogonal to a complete set of functions f (θ ); thus zero almost everywhere for (2 ≤ i ≤ n). Noting that the kernel may be written in the form g(y|θ ) ∂ log , (8.7) K i (θ, θ ) = g(y|θ) g(y|θ ) ∂ yi g(y|θ ) this condition may be stated as: given any (θ, θ ), then for all possible samples (that is, all values of {y1 , . . . , yn ; θ; θ } for which g(y|θ) g(y|θ ) = 0), the ratio [g(y|θ )/g(y|θ )] must be independent of the components (y2 , . . . , yn ). Thus to achieve property R independently of the prior, g(y|θ ) must have the functional form g(y1 , . . . , yn |θ) = q(y1 |θ)m(y2 , . . . , yn ).

(8.8)

Integrating (y2 , . . . , yn ) out of (8.8), we see that the function denoted by q(y1 |θ ) is, to within a normalization constant, the marginal sampling pdf for y1 . Transforming back to the original variables, Fisher sufficiency requires that the sampling pdf has the form p(x1 . . . xn |θ) = p(r |θ)b(x1 , . . . , xn ),

(8.9)

where p(r |θ ) is the marginal sampling density for r (x1 , . . . , xn ). Equation (8.9) was given by Fisher (1922). If a sampling distribution factors in the manner (8.8), (8.9), then the sampling pdf for (y2 , . . . , yn ) is independent of θ. This being the case, he felt intuitively that the values of (y2 , . . . , yn ) can convey no information about θ; full information should be conveyed by the single quantity r , which he then termed a sufficient statistic. But Fisher’s reasoning was only a conjecture referring to a sampling theory context. We do not see how it could be proved in that limited context, which did not use the concepts of prior and posterior probabilities.

246

Part 1 Principles and elementary applications

Probability theory as logic can demonstrate this property directly without any need for conjecture. Indeed, using (8.9) in (8.1), the function b(x) cancels out, and we find immediately the relation h(θ|D) ∝ f (θ) p(r |θ).

(8.10)

Thus, if (8.10) holds, then r (x1 , . . . , xn ) is a sufficient statistic in the sense of Fisher, and in Bayesian inference with the assumed model (8.1), knowledge of the single quantity r does indeed tell us everything about θ that is contained in the full data set (x1 , . . . , xn ); and this will be true for all priors f (θ). The idea generalizes at once to more variables. Thus, if the sampling distribution factors in the form g(y1 , . . . , yn |θ) = h(y1 , y2 |θ) m(y3 , . . . , yn ), we would say that y1 (x1 , . . . , xn ) and y2 (x1 , . . . , xn ) are jointly sufficient statistics for θ and, in this, θ could be multidimensional. If there are two parameters θ1 , θ2 such that there is a coordinate system {yi } in which g(y1 , . . . , yn |θ1 θ2 ) = h(y1 |θ1 )k(y2 |θ2 )m(y3 , . . . , yn ),

(8.11)

then y1 (x1 , . . . , xn ) is a sufficient statistic for θ1 , and y2 is a sufficient statistic for θ2 ; and so on. 8.2.1 Examples Our discussion of the Gaussian distribution in Chapter 7 has already demonstrated that it has sufficient statistics [Eqs. (7.25)–(7.30)]. If the data D = {y1 , . . . , yn } consist of n independent observations yi , then the sampling distribution with mean and variance µ, σ 2 could be written as

n/2 % n & 1 2 2 exp − [(µ − y) + s ] , (8.12) p(D|µσ I ) = 2πσ 2 2σ 2 where y, s 2 are the observed sample mean and variance, Eq. (7.29). Since these are the only properties of the data that appear in the sampling distribution (8.12) – and therefore are the only properties of the data that occur in the joint posterior distribution p(µσ |D I ) – they are jointly sufficient statistics for estimation of µ, σ . The test for sufficiency via Bayes’ theorem is often easier to carry out than is the test for factorization (8.11), although of course they amount to the same thing. Let us examine sufficiency for the separate parameters. If σ is known, then we would find the posterior distribution for µ alone: p(µ|I ) p(D|µσ I ) , dµ p(µ|I ) p(D|µI ) n 1 2 (xi − µ) , p(x1 . . . xn |µσ I ) = A exp − 2 σ i=1 & % n ns 2 = A exp − 2 × exp − 2 (x − µ)2 , 2σ 2σ p(µ|σ D I ) = A

(8.13)

(8.1)

8 Sufficiency, ancillarity, and all that

247

where 1 2 x , s2 ≡ x 2 − x 2, (8.15) n i i & % n (8.16) p(µ|σ D I ) ∝ p(u|I ) exp − 2 (x − µ) 2σ are the sample mean, mean square, and variance, respectively. Since now the factor exp{−ns 2 /2s 2 } appears in both numerator and denominator, it cancels out. Likewise, if µ is known, then the posterior pdf for σ alone is found to be % n & (8.17) p(σ |µD I ) ∝ p(σ |I )σ −n exp − 2 (x 2 − 2µx + µ2 ) . 2σ Fisher sufficiency was of major importance in orthodox (non-Bayesian) statistics, because it had so few criteria for choosing an estimator. It had, moreover, a fundamental status lacking in other criteria because, for the first time, the notion of information appeared in orthodox thinking. If a sufficient statistic for θ exists, it is hard to justify using any other for inference about θ. From a Bayesian standpoint one would be, deliberately, throwing away some of the information in the data that is relevant to the problem.2 x≡

n 1 xi , n i=1

x2 ≡

8.2.2 The Blackwell–Rao theorem Arguments in terms of information content had almost no currency in orthodox theory, but a theorem given by D. Blackwell and C. R. Rao in the 1940s did establish a kind of theoretical justification for the use of sufficient statistics in orthodox terms. Let r (x1 , . . . , xn ) be a Fisher sufficient statistic for θ , and let β(x1 , . . . , xn ) be any proposed estimator for θ . By (8.9) the joint pdf for the data conditional on r : p(x1 . . . xn |r θ) = b(x) p(r |xθ) = b(x)δ(r − r (x))

(8.18)

is independent of θ. Then the conditional expectation β0 (r ) ≡ β|r θ = E(β|r θ )

(8.19)

is also independent of θ, so β0 is a function only of the xi , and so is itself a conceivable estimator for θ , which depends on the observations only through the sufficient statistic: β0 = E(β|r ). The theorem is then that the ‘quadratic risk’ (8.20) R(θ, β) ≡ E[(β − θ)2 |θ] = dx1 · · · dxn [β(x1 , . . . , xn ) − θ ]2 satisfies the inequality R(θ, β0 ) ≤ R(θ, β), 2

(8.21)

This rather vague statement becomes a definite theorem when we learn that, if we measure information in terms of entropy, then zero information loss in going from the full data set D to a statistic r is equivalent to sufficiency of r . The beginnings of this appeared long ago, in the Pitman–Koopman theorem (Koopman, 1936; Pitman, 1936); we give a modern version in Chapter 11.

248

Part 1 Principles and elementary applications

for all θ . If R(θ, β) is bounded, there is equality if and only if β0 = β; that is, if β itself depends on the data only through the sufficient statistic r . In other words, given any estimator β for θ, if a sufficient statistic r exists, then we can find another estimator β0 that achieves a lower or equal risk and depends only on r . Thus the best estimator we can find by the criterion of quadratic risk can always be chosen so that it depends on the data only through r . A proof is given by de Groot (1975, 1986 edn, p. 373); the orthodox notion of risk is discussed further in Chapters 13 and 14. But if a sufficient statistic does not exist, orthodox estimation theory is in real trouble because it wastes information; no single estimator can take note of all the relevant information in the data. The Blackwell–Rao argument is not compelling to a Bayesian, because the criterion of risk is a purely sampling theory notion that ignores prior information. But Bayesians have a far better justification for using sufficient statistics; it is straightforward mathematics, evident from (8.9) and (8.10) that, if a sufficient statistic exists, Bayes’ theorem will lead us to it automatically, without our having to take any particular note of the idea. Indeed, far more is true: from the proofs of Chapter 2, Bayes’ theorem will lead us to the optimal inferences,3 whether or not a sufficient statistic exists. So, in Bayesian inference, sufficiency is a valid concept; but it is not a fundamental theoretical consideration, only a pleasant convenience affecting the amount of computation but not the quality of the inference. We have seen that sufficient statistics exist for the binomial, rectangular, and Gaussian sampling distributions. But consider the Cauchy distribution p(x1 . . . xn |θ I ) =

n 1 1 . 2 π 1 + (x i − θ) i=1

(8.22)

This does not factor in the manner (8.9), and so there is no sufficient statistic. With a Cauchy sampling distribution, it appears that no part of the data is irrelevant; every scrap of it is used in Bayesian inference, and it makes a difference in our inferences about θ (that is, in details of the posterior pdf for θ). Then there can be no satisfactory orthodox estimator for θ ; a single function conveys only one piece of information concerning the data, and misses (n − 1) others, all of which are relevant and used by Bayesian methods.

8.3 Generalized sufficiency What Fisher could not have realized, because of his failure to use priors, is that the proviso for all priors is essential here. Fisher sufficiency, Eq. (8.9), is the strong condition necessary to achieve property R independently of the prior. But what was realized only recently is that property R may hold under weaker conditions that depend on which prior we assign. Thus, the notion of sufficiency, which originated in the Bayesian considerations of Laplace, actually has a wider meaning in Bayesian inference than in sampling theory. 3

That is, optimal in the aforementioned sense that no other procedure can yield unique results while agreeing with our desiderata of rationality.

8 Sufficiency, ancillarity, and all that

249

To see this, note that, since the integral equations (8.5) are linear, we may think in terms of linear vector spaces. Let the class of all priors span a function space (Hilbert space) H of functions on the parameter space Sθ . If property R holds only for some subclass of priors f (θ ) ∈ H that span a subspace H ⊂ H , then in (8.5) it is required only that the projection of K i (θ, θ ) onto that subspace vanishes. Then K i (θ, θ ) may be an arbitrary function on the complementary function space (H − H ) of functions orthogonal to H . This new understanding is that, for some priors, it is possible to have ‘effective sufficient statistics’, even though a sufficient statistic in the sense of Fisher does not exist. Given any specified function r (x1 , . . . , xn ) and sampling density p(x1 . . . xn |θ), this determines a kernel K i (θ, θ ) which we may construct by (8.6). If this kernel is incomplete (i.e. as (θ, θ , i) vary over their range, the kernel, thought of as a set of functions of θ parameterized by (θ, i), does not span the entire function space H ), then the set of simultaneous integral equations (8.5) has nonvanishing solutions f (θ). If there are non-negative solutions, they will determine a subclass of priors f (θ) for which r would play the role of a sufficient statistic. Then the possibility seems open that, for different priors, different functions r (x1 , . . . , xn ) of the data may take on the role of sufficient statistics. This means that use of a particular prior may make certain particular aspects of the data irrelevant. Then a different prior may make different aspects of the data irrelevant. One who is not prepared for this may think that a contradiction or paradox has been found. This phenomenon is mysterious only for those who think of probability in terms of frequencies; as soon as we think of probability distributions as carriers of information the reason for it suddenly seems trivial and obvious. It really amounts to no more than the principle of Boolean algebra A A = A; redundant information is not counted twice. A piece of information in the prior makes a difference in our conclusions only when it tells us something that the data do not tell us. Conversely, a piece of information in the data makes a difference in our conclusions only when it tells us something that the prior information does not. Any information that is conveyed by both is redundant, and can be removed from either one without affecting our conclusions. Thus in Bayesian inference a prior can make some aspect of the data irrelevant simply by conveying some information that is also in the data. But is this new freedom expressing trivialities, or potentially useful new capabilities for Bayesian inference, which Fisher and Jeffreys never suspected? To show that we are not just speculating about an empty case, note that we have already seen an extreme example of this phenomenon, in the strange properties that use of the binomial monkey prior had in urn sampling (Chapter 6); it made all of the data irrelevant, although with other priors all of the data were relevant. 8.4 Sufficiency plus nuisance parameters In Section 8.2, the parameter θ might have been multidimensional, and the same general arguments would go through in the same way. The question becomes much deeper if we now suppose that there are two parameters θ, η in the problem, but we are not interested

250

Part 1 Principles and elementary applications

in η, so for us the question of sufficiency concerns only the marginal posterior pdf for θ. Factoring the prior p(θ η|I ) = f (θ) g(η|θ), we may write the desired posterior pdf as dη p(θη) f (x1 , . . . , xn |θη) f (θ)F(x1 , . . . , xn |θ) = , (8.23) h(θ |D) = dθdη p(θη) f (x1 , . . . , xn |θη) dθ f (θ )F(x1 , . . . , xn |θ) where

F(x1 , . . . , xn |θ) ≡

dη p(η|θ I ) f (x1 , . . . , xn |θ, η).

(8.24)

Since this has the same mathematical form as (8.1), the steps (8.5)–(8.9) may be repeated and the same result must follow; given any specified p(η|θ I ) for which the integral (8.24) converges, if we then find that the marginal distribution for θ has property R for all priors f (θ ), then F(x1 , . . . , xn |θ) must factorize in the form F(x1 , . . . , xn |θ) = F ∗ (r |θ)B(x1 , . . . , xn ).

(8.25)

But the situation is entirely different because F(x1 , . . . , xn |θ) no longer has the meaning of a sampling density, being a different function for different priors p(η|θ I ). Now {F, F ∗ , B} are all functionals of p(η|θ I ).4 Thus the presence of nuisance parameters changes the details, but the general phenomenon of sufficiency is retained.

8.5 The likelihood principle In applying Bayes’ theorem, the posterior pdf for a parameter θ is always a product of a prior p(θ|I ) and a likelihood function L(θ) ∝ p(D|θ I ); the only place where the data appear is in the latter. Therefore it is manifest that Within the context of the specified model, the likelihood function L(θ ) from data D contains all the information about θ that is contained in D. For us, this is an immediate and mathematically trivial consequence of the product rule of probability theory, and is no more to be questioned than the multiplication table. Put differently, two data sets D, D that lead to the same likelihood function to within normalization: L(θ ) = a L (θ), where ‘a’ is a constant independent of θ , have just the same import for any inferences about θ, whether it be point estimation, interval estimation, or hypothesis testing. But for those who think of a probability distribution as a physical phenomenon arising from ‘randomness’ rather than a carrier of incomplete information, the above quoted statement – since it involves only the sampling distribution – has a meaning independent of the product rule and Bayes’ theorem. They call it the ‘likelihood principle’, and its status as a valid principle of inference has been the subject of long controversy, still continuing today. An elementary argument for the principle, given by George Barnard (1947), is that irrelevant data ought to cancel out of our inferences. He stated it thus: Suppose that in 4

In orthodox statistics, F ∗ (r |θ) would be interpreted as the sampling density to be expected in a compound experiment in which θ is held fixed but η is varied at random from one trial to the next, according to the distribution p(η|θ I ).

8 Sufficiency, ancillarity, and all that

251

addition to obtaining the data D we flip a coin and record the result Z = H or T . Then the sampling probability for all our data becomes, as Barnard would have written it, p(D Z |θ) = p(D|θ) p(Z ).

(8.26)

Then he reasoned that, obviously, the result of a coin flip can tell us nothing more about the parameter θ beyond what the data D have to say; and so inference about θ based on D Z ought to be exactly the same as inference based on D alone. From this he drew the conclusion that constant factors in the likelihood must be irrelevant to inferences; that is, inferences about θ may depend only on the ratios of likelihoods for different values: p(D|θ1 I ) p(D Z |θ1 I ) L1 = , = L2 p(D Z |θ2 I ) p(D|θ2 I )

(8.27)

which are the same whether Z is or is not included. This is commonly held to be the first statement of the likelihood principle by an orthodox statistician. It is just what we considered obvious already back in Chapter 4, when we noted that a likelihood is not a probability because its normalization is arbitrary. But not all orthodoxians found Barnard’s argument convincing. Alan Birnbaum (1962) gave the first attempted proof of the likelihood principle to be generally accepted by orthodox statisticians. From the enthusiastic discussion following his paper, we see that many regarded this as a major historical event in statistics. He again appeals to coin tossing, but in a different way, through the principle of Fisher sufficiency plus a ‘conditionality principle’ which appeared to him more primitive: Conditionality principle Suppose we can estimate θ from either of two experiments, E 1 and E 2 . If we flip a coin to decide which to do, then the information we get about θ should depend only on the experiment that was actually performed. That is, recognition of an experiment that might have been performed, but was not, cannot tell us anything about θ . But Birnbaum’s argument was not accepted by all orthodox statisticians, and Birnbaum himself seems to have had later doubts. One can criticize the conditionality principle by asking: ‘How did you choose the experiments E 1 , E 2 ?’ Presumably, they were chosen with some knowledge of their properties. For example, we may know that one kind of experiment may be very good for small θ, a different one for large θ. Suppose that both E 1 and E 2 are most accurate for small θ and that there is a third experiment E 3 which is accurate for large θ . We assume that we chose E 1 and E 2 , and the coin flip chose E 1 . Then the fact that the coin flip did not choose E 2 need not make recognition of E 2 irrelevant to the inference; the very fact that we included it in our enumeration of experiments worth considering implies some prior knowledge favoring small θ. In any event, Kempthorne and Folks (1971) and Fraser (1980) continued to attack the likelihood principle and deny its validity. From his failure to attack it when he was attacking almost every other principle of inference, we may infer that R. A. Fisher probably accepted

252

Part 1 Principles and elementary applications

the likelihood principle, although his own procedures did not respect it. But he continued to denounce the use of Bayes’ theorem on other ideological grounds. For further discussion, see A.W. F. Edwards (1974), or Berger and Wolpert (1988). The issue becomes even more complex and confusing in connection with the notion of ancillarity, discussed below. Orthodoxy is obliged to violate the likelihood principle for three different reasons: (1) its central dogma that ‘The merit of an estimator is determined by its long-run sampling properties’, which makes no reference to the likelihood function; (2) its secondary dogma that the accuracy of an estimate is determined by the width of the sampling distribution for the estimator, which again takes note of the likelihood principle; and (3) procedures in which ‘randomization’ is held to generate the probability distribution used in the inference! These are still being taught, and defended vigorously, by people who do not seem to comprehend that their conclusions are then determined, not by the relevant evidence in the data, but by irrelevant artifacts of the randomization. In Chapter 17 we shall examine the so-called ‘randomization tests’ of orthodoxy and see how Bayesian analysis deals with the same problems. Indeed, even coin flip arguments cannot be accepted unconditionally if they are to be taken literally; particularly by a physicist who is aware of all the complicated things that happen in real coin flips, as described in Chapter 10. If there is any logical connection between θ and the coin, so that knowing θ would tell us anything about the coin flip, then knowing the result of the coin flip must tell us something about θ. For example, if we are measuring a gravitational field by the period of a pendulum, but the coin is tossed in that same gravitational field, there is a clear logical connection. Both Barnard’s argument and Birnbaum’s conditionality principle contain an implicit hidden assumption that this is not the case. Presumably, they would reply that, without saying so explicitly, they really meant ‘coin flip’ in a more abstract sense of some binary experiment totally detached from θ and the means of measuring it. But then, the onus was on them to define exactly what that binary experiment was, and they never did this. In our view, this line of thought takes us off into an infinite regress of irrelevancies; in our system, the likelihood principle is already proved as an immediate consequence of the product rule of probability theory, independently of all considerations of coin flips or any other auxiliary experiment. But for those who ignore Cox’s theorems, ad hoc devices continue to take precedence over the rules of probability theory, and there is a faction in orthodoxy that still militantly denies the validity of the likelihood principle. It is important to note that the likelihood principle, like the likelihood function, refers only to the context of a specified model which is not being questioned; seen in a wider context, it may or may not contain all the information in the data that we need to make the best estimate of θ, or to decide whether to take more data or stop the experiment now. Is there additional external evidence that the apparatus is deteriorating? Or, is there reason to suspect that our model may not be correct? Perhaps a new parameter λ is needed. But to claim that the need for additional information like this is a refutation of the likelihood principle, is only to display a misunderstanding of what the likelihood principle is; it is a ‘local’ principle, not a ‘global’ one.

8 Sufficiency, ancillarity, and all that

253

8.6 Ancillarity Consider estimation of a location parameter θ from a sampling distribution p(x|θ I ) = f (x − θ |I ).5 Fisher (1934) perceived a strange difficulty with orthodox procedures. Choosing some function of the data θ ∗ (x1 , . . . , xn ) as our estimator, two different data sets might yield the same estimate for θ, yet have very different configurations (such as range, fourth central moments, etc.), and must leave us in a very different state of knowledge concerning θ . In particular, it seemed that a very broad range and a sharply clustered one might lead us to the same actual estimate, but they ought to yield very different conclusions as to the accuracy of that estimate. Yet if we hold that the accuracy of an estimate is determined by the width of the sampling distribution for the estimator, one is obliged to conclude that all estimates from a given estimator have the same accuracy, regardless of the configuration of the sample. Fisher’s proposed remedy was not to question the orthodox reasoning which caused this anomaly, but rather to invent still another ad hockery to patch it up: use sampling distributions conditional on some ‘ancillary’ statistic z(x1 , . . . , xn ) that gives some information about the data configuration that is not contained in the estimator. In general, a single statistic cannot describe the data configuration fully; this could require as many as (n − 1) ancillary statistics. But Fisher could not always supply them; often they do not exist, because he also demanded that the sampling distribution p(z|θ I ) = p(z|I ) for an ancillary statistic must be independent of θ . We do not know Fisher’s private reason for imposing this independence, but from a Bayesian viewpoint we can see easily what it accomplishes. The conditional sampling distribution for the data that Fisher would use is then p(D|zθ I ). In orthodox statistics, this changed sampling distribution can in general lead to different conclusions about θ . But we process this by Bayes’ theorem: p(D|zθ I ) =

p(z|Dθ I ) p(z D|θ I ) = p(D|θ I ) . p(z|θ I ) p(z|θ I )

(8.28)

Now if z = z(D) is a function only of the data, then p(z|Dθ I ) is just a delta-function δ[z − z(D)]; so, if p(z|θ I ) is independent of θ, the conditioned sampling distribution p(D|zθ I ) has the same θ dependence (that is, it yields the same likelihood function) as does the unconditional sampling distribution p(D|θ I ). Put differently, from a Bayesian standpoint what Fisher’s procedure accomplishes is nothing at all; the likelihood L(θ) is unchanged, so any method of inference – whether for point estimation, interval estimation, or hypothesis testing – that respects the likelihood principle will lead to just the same inferences about θ, whether or not we condition on an ancillary statistic. Indeed, in Bayesian analysis, if z is a function only of the data, then the value of z is known from the data, so it is redundant information; whether it is or is not included also in the prior information cannot matter. This is, again, just the principle A A = A of elementary logic that we are obliged to stress so often because orthodoxy does not seem to comprehend its implications. 5

For example, if the mean of a set of samples is used as the estimator, then, given a set of samples, the observed variation of the mean is called the sampling distribution of the mean.

254

Part 1 Principles and elementary applications

The fact that Fisher obtained different estimates, depending on whether he did or did not condition on ancillary statistics, indicates only that his unconditioned procedure violated the likelihood principle. On the other hand, if we condition on a quantity Z that is not just a function of the data, then Z conveys additional information that is not in the data; and we must expect that in general this will alter our inferences about θ. Orthodoxy, when asked for the accuracy of the estimate, departs from the likelihood principle a second time by appealing not to any property of the likelihood function from our data set, but rather to the width of the sampling distribution for the estimator – a property of that imaginary collection of data sets that one thought might have been observed but were not. For us, adhering to the likelihood principle, it is the width of the likelihood function, from the one data set that we actually have, that tells us the accuracy of the estimate from that data set; imaginary data sets that were not seen are irrelevant to the question we are asking.6 Thus, for a Bayesian the question of ancillarity never comes up at all; we proceed directly from the statement of the problem to the solution that obeys the likelihood principle.

8.7 Generalized ancillary information Now let us take a broader view of the notion of ancillary information, as referring not to Fisher ancillarity (in which the ancillary statistic z is part of the data), but to any additional quantity Z that we do not consider part of the prior information or the data. As before, we define θ = parameters (interesting or uninteresting) noise E = e1 , . . . , en , D = d1 , . . . , dn , data di = f (ti θ) + ei , model.

(8.29)

But now we add Z = z1, . . . , zm

ancillary data.

(8.30)

We want to estimate θ from the posterior pdf, p(θ|D Z I ), and direct application of Bayes’ theorem gives p(θ|D Z I ) = p(θ|I )

p(D Z |θ I ) , p(D Z |I )

(8.31)

in which Z appears as part of the data. But now we suppose that Z has, by itself, no direct relevance to θ: p(θ|Z I ) = p(θ|I ).

(8.32)

This is the essence of what Fisher meant by the term ‘ancillary’, although his ideology did not permit him to state it this way (since he admitted only sampling distributions, he was 6

The width of the sampling distribution for the estimator is the answer to a very different question: How would the estimates vary over the class of all different data sets that we think might have been seen?

8 Sufficiency, ancillarity, and all that

255

obliged to define all properties in terms of sampling distributions). He would say instead that ancillary data have a sampling distribution independent of θ: p(Z |θ I ) = p(Z |I ),

(8.33)

which he would interpret as: θ exerts no causal physical influence on Z . But from the product rule, p(θ Z |I ) = p(θ|Z I ) p(Z |I ) = p(Z |θ I ) p(θ|I ),

(8.34)

we see that from the standpoint of probability theory as logic, (8.32) and (8.33) are equivalent; either implies the other. Expanding the likelihood ratio by the product rule and using (8.33), p(D|θ Z I ) p(D Z |θ I ) = . p(D Z |I ) p(D|Z I )

(8.35)

Then, in view of (8.32), we can rewrite (8.31) equally well as p(θ|D Z I ) = p(θ|Z I )

p(D|θ Z I ) , p(D|Z I )

(8.36)

and now the generalized ancillary information appears to be part of the prior information. A peculiar property of generalized ancillary information is that the relationship between θ and Z is a reciprocal one; had we been interested in estimating Z but knew θ , then θ would appear as a ‘generalized ancillary statistic’. To see this most clearly, note that the definitions (8.32) and (8.33) of an ancillary statistic are equivalent to the factorization: p(θ Z |I ) = p(θ|I ) p(Z |I ).

(8.37)

Now recall how we handled this before, when our likelihood was only L 0 (θ) ∝ p(D|θ I ).

(8.38)

Because of the model equation (8.29), if θ is known, then the probability of getting any datum di is just the probability that the noise would have made up the difference: ei = di − f (ti , θ).

(8.39)

So if the prior pdf for the noise is a function p(E|θ I ) = u(e1 , . . . , en , θ) = u({ei }, θ )

(8.40)

p(D|θ I ) = u({di − f (ti , θ )}, θ ),

(8.41)

we have

the same function of {di − f (ti , θ)}. In the special case of a white Gaussian noise pdf independent of θ, this led to Eq. (7.28). Our new likelihood function (8.35) can be dealt with in the same way, only in place of (8.41) we shall have a different noise pdf, conditional on Z . Thus the effect of ancillary

256

Part 1 Principles and elementary applications

data is simply to update the original noise pdf: p(E|θ I ) → p(E|θ Z I ),

(8.42)

and in general ancillary data that have any relevance to the noise will affect our estimates of all parameters through this changed estimate of the noise. In (8.40)–(8.42) we have included θ in the conditioning statement to the right of the vertical stroke to indicate the most general case. But in all the cases examined in the orthodox literature, knowledge of θ would not be relevant to estimating the noise, so what they actually did was the replacement p(E|I ) → p(E|Z I )

(8.43)

instead of (8.42). Also, in the cases we have analyzed, this updating is naturally regarded as arising from a joint sampling distribution, which is a function p(D Z |I ) = w(e1 , . . . , en , z 1 , . . . , z m ).

(8.44)

The previous noise pdf (8.40) is then a marginal distribution of (8.44): p(D|I ) = u(e1 · · · en ) = dz 1 · · · dz m w(e1 , . . . , en , z 1 , . . . , z m ),

(8.45)

the prior pdf for the ancillary data is another marginal distribution: p(Z |I ) = de1 · · · den w(e1 , . . . , en , z 1 , . . . , z m ),

(8.46)

and the conditional distribution is p(D|Z I ) =

w(ei , z j ) p(D Z |I ) = . p(Z |I ) v(z j )

(8.47)

Fisher’s original application, and the ironic lesson it had for the relation of Bayesian and sampling theory methods, is explained in the Comments at the end of this chapter, Section 8.12. 8.8 Asymptotic likelihood: Fisher information Given a data set D ≡ {x1 , . . . , xn }, the log likelihood is n 1 1 log L(θ) = log p(xi |θ). n n i=1

(8.48)

What happens to this function as we accumulate more and more data? The usual assumption is that, as n → ∞, the sampling distribution p(x|θ) is actually equal to the limiting relative frequencies of the various data values xi . We know of no case where one could actually know this to be true in the real world; so the following heuristic argument is all that is

8 Sufficiency, ancillarity, and all that

257

justified. If this assumption were true, then we would have asymptotically, as n → ∞, 1 log L(θ) → dx p(x|θ0 ) log p(x|θ ), (8.49) n where θ0 is the ‘true’ value, presumed unknown. Denoting the entropy of the ‘true’ density by (8.50) H0 = − dx p(x|θ0 ) log p(x|θ0 ), we have for the asymptotic likelihood function p(x|θ ) 1 log L(θ) + H0 = dx p(x|θ0 ) log ≤ 0, n p(x|θ0 )

(8.51)

where, letting q ≡ p(x|θ0 )/ p(x|θ), we used the fact that, for positive real q, we have log(q) ≤ q − 1, with equality if and only if q = 1. Thus we have equality in (8.51) if and only if p(x|θ) = p(x|θ0 ) for all x for which p(x|θ0 ) > 0. But if two different values θ, θ0 of the parameter lead to identical sampling distributions, then they are confounded: the data cannot distinguish between them. If the parameter is always ‘identified’, in the sense that different values of θ always lead to different sampling distributions for the data, then we have equality in (8.51) if and only if θ = θ0 , so the asymptotic likelihood function L(θ) reaches its maximum at the unique point θ = θ0 . Supposing the parameter multidimensional: θ ≡ {θ1 , . . . , θm } and expanding about this maximum, we have log p(x|θ) = log p(x|θ0 ) − or

m ∂ 2 log p(x|θ ) 1 δθi δθ j 2 i, j=1 ∂θi ∂θ j

L(θ) 1 1 log Ii j δθi δθ j , =− n L(θ0 ) 2 ij

where

Ii j ≡

dn x p(x|θ0 )

∂ 2 log p(x|θ) ∂θi ∂θ j

(8.52)

(8.53)

(8.54)

is called the Fisher information matrix. It is a useful measure of the ‘resolving power’ of the experiment; that is, considering two close values θ, θ , how big must the separation |θ − θ | be in order that the experiment can distinguish between them? 8.9 Combining evidence from different sources We all know that there are good and bad experiments. The latter accumulate in vain. Whether there are a hundred or a thousand, one single piece of work by a real master – by a Pasteur, for example – will be sufficient to sweep them into oblivion. Henri Poincar´e (1904, p. 141)

258

Part 1 Principles and elementary applications

We all feel intuitively that the totality of evidence from a number of experiments ought to enable better inferences about a parameter than does the evidence of any one experiment. But intuition is not powerful enough to tell us when this is valid. One might think na¨ıvely that if we have 25 experiments, each yielding conclusions with an accuracy of ±10%, then √ by averaging them we get an accuracy of ±10/ 25 = ±2%. This seems to be supposed by a method currently in use in psychology and sociology, called meta-analysis (Hedges and Olkin, 1985). Probability theory as logic shows clearly how and under what circumstances it is safe to combine this evidence. The classical example showing the error of uncritical reasoning here is the old fable about the height of the Emperor of China. Supposing that each person in China surely knows the height of the Emperor to an accuracy of at least ±1 meter; if there are N = 1 000 000 000 inhabitants, then it seems that we could determine his height to an accuracy at least as good as 1 m = 3 × 10−5 m = 0.03 mm, √ 1 000 000 000

(8.55)

merely by asking each person’s opinion and averaging the results. √ The absurdity of the conclusion tells us rather forcefully that the N rule is not always valid, even when the separate data values are causally independent; it is essential that they be logically independent. In this case, we know that the vast majority of the inhabitants of China have never seen the Emperor; yet they have been discussing the Emperor among themselves, and some kind of mental image of him has evolved as folklore. Then, knowledge of the answer given by one does tell us something about the answer likely to be given by another, so they are not logically independent. Indeed, folklore has almost surely generated a systematic error, which survives the averaging; thus the above estimate would tell us something about the folklore, but almost nothing about the Emperor. We could put it roughly as follows: R error in estimate = S ± √ , N

(8.56)

where S is the common systematic error in each datum, R is the RMS ‘random’ error in the individual data values. Uninformed opinions, even though they may agree well among themselves, are nearly worthless as evidence. Therefore sound scientific inference demands that, when this is a possibility, we use a form of probability theory (i.e., a probabilistic model) which is sophisticated enough to detect this situation and make allowances for it. As a start on this, (8.56) gives us a crude but useful rule of thumb; it shows that, unless we know that the systematic error is less than about one-third of the random error, we cannot be sure that the average of one million data values is any more accurate or reliable than the average of ten. As Henri Poincar´e put it: ‘The physicist is persuaded that one good measurement is worth many bad ones.’ Indeed, this has been well recognized by experimental physicists for generations; but warnings about it are conspicuously missing

8 Sufficiency, ancillarity, and all that

259

from textbooks written by statisticians, and so it is not sufficiently recognized in the ‘soft’ sciences whose practitioners are educated from those textbooks. Let us investigate this more carefully using probability theory as logic. Firstly we recall the chain consistency property of Bayes’ theorem. Suppose we seek to judge the truth of some hypothesis H , and we have two experiments which yield data sets A, B, respectively. With prior information I , from the first we would conclude p(H |AI ) = p(H |I )

p(A|H I ) . p(A|I )

(8.57)

Then this serves as the prior probability when we obtain the new data B: p(H |AB I ) = p(H |AI )

p(A|H I ) p(B|AH I ) p(B|AH I ) = p(H |I ) . p(B|AI ) p(A|I ) p(B|AI )

(8.58)

But p(A|H I ) p(B|AH I ) = p(AB|H I ) p(A|I ) p(B|AI ) = p(AB|I ),

(8.59)

p(AB|H I ) , p(AB|I )

(8.60)

so (8.58) reduces to p(H |AB I ) = p(H |I )

which is just what we would have found had we used the total evidence C = AB in a single application of Bayes’ theorem. This is the chain consistency property. We see from this that it is valid to combine the evidence from several experiments if: (1) the prior information I is the same in all; (2) the prior for each experiment includes also the results of the earlier ones.

To study one condition a time, let us leave it as an exercise for the reader to examine the effect of violating (1), and suppose for now that we obey (1) but not (2), but we have from the second experiment alone the conclusion p(H |B I ) = p(H |I )

p(B|H I ) . p(B|I )

(8.61)

Is it possible to combine the conclusions (8.57) and (8.61) of the two experiments into a single more reliable conclusion? It is evident from (8.58) that this cannot be done in general; it is not possible to obtain p(H |AB I ) as a function of the form p(H |AB I ) = f [ p(H |AI ), p(H |B I )] ,

(8.62)

because this requires information not contained in either of the arguments of that function. But if it is true that p(B|AH I ) = p(B|H I ), then from the product rule written in the form p(AB|I ) = p(A|B H I ) p(B|H I ) = p(B|AH I ) p(A|H I ),

(8.63)

260

Part 1 Principles and elementary applications

Table 8.1. Experiment A.

Old New

Failures

Successes

Success (%)

16 519 742

4343 122

20.8 ± 0.28 14.1 ± 1.10

Table 8.2. Experiment B.

Old New

Failures

Successes

Success (%)

3876 1233

14 488 3907

78.9 ± 0.30 76.0 ± 0.60

it follows that p(A|B H I ) = p(A|H I ), and this will work. For this, the data sets A, B must be logically independent in the sense that, given H and I , knowing either data set would tell us nothing about the other. If we do have this logical independence, then it is valid to combine the results of the experiments in the above na¨ıve way, and we will in general improve our inferences by so doing. Meta-analysis, applied without regard to these necessary conditions, can be utterly misleading. At this point, we are beginning to see the kind of dangerous nonsense that can be produced by those who fail to distinguish between causal independence and logical independence. But the situation is still more subtle and dangerous; suppose one tried to circumvent this by pooling all the data before analyzing them; that is, using (8.60). Let us see what could happen to us. 8.10 Pooling the data The following data are real, but the circumstances were more complicated than supposed in the following scenario. Patients were given either of two treatments, the old one and a new one, and the number of successes (recoveries) and failures (deaths) were recorded. In experiment A the data were as given in Table 8.1. In which the entries in the last column are √ of the form 100 × [ p ± p(1 − p)/n], indicating the standard deviation to be expected from binomial sampling. Experiment B, conducted two years later, yielded the data given in Table 8.2. In each experiment, the old treatment appeared slightly but significantly better (that is, the differences in p were greater than the standard deviations). The results were very discouraging to the researchers. But then one of them had a brilliant idea: let us pool the data, simply adding up in the manner 4343 + 14 488 = 18 831, etc. Then we have the contingency table, Table 8.3. Now the new treatment appears much better with overwhelmingly high significance (the difference is over 20 times the sum of the standard deviations)! They eagerly publish this

8 Sufficiency, ancillarity, and all that

261

Table 8.3. Pooled data.

Old New

Failures

Successes

Success (%)

20 395 1975

18 831 4029

48.0 ± 0.25 67.1 ± 0.61

gratifying conclusion, presenting only the pooled data; and become (for a short time) famous as great discoverers. How is such an anomaly possible with such innocent looking data? How can two data sets, each supporting the same conclusion, support the opposite conclusion when pooled? Let the reader, before proceeding, ponder these tables and form your own opinion of what is happening. The point is that an extra parameter is clearly present. Both treatments yielded much better results two years later. This unexpected fact is, evidently, far more important than the relatively small differences in the treatments. Nothing in the data per se tells us the reason for this (better control over procedures, selection of promising patients for testing, etc.) and only prior information about further circumstances of the tests can suggest a reason. Pooling the data under these conditions introduces a very misleading bias; the new treatment appears better simply because, in the second experiment, six times as many patients were given the new treatment, while fewer were given the old one. The correct conclusion from these data is that the old treatment remains noticeably better than the new one; but another factor is present that is vastly more important than the treatment. We conclude from this example that pooling the data to estimate a parameter θ is not permissible if the separate experiments involve other parameters (α, β, . . .) which can be different in different experiments. In (8.61)–(8.63) we supposed (by failing to mention them) that no such parameters were present, but real experiments almost always have nuisance parameters which are eliminated separately in drawing conclusions. In summary, the meta-analysis procedure is not necessarily wrong; but when applied without regard to these necessary qualifications it can lead to disaster. But we do not see how anybody could have found all these qualifications by intuition alone. Without the Bayesian analysis there is almost no chance that one could apply meta-analysis safely; the safe procedure is not to mention meta-analysis at all as if it were a new principle, but simply to apply probability theory with strict adherence to our Chapter 2 rules. Whenever metaanalysis is appropriate, the full Bayesian procedure automatically reduces to meta-analysis. 8.10.1 Fine-grained propositions One objection that has been raised to probability theory as logic notes a supposed technical difficulty in setting up problems. In fact, many seem to be perplexed by it, so let us examine the problem and its resolution.

262

Part 1 Principles and elementary applications

The Venn diagram mentality, noted at the end of Chapter 2, supposes that every probability must be expressed as an additive measure on some set; or, equivalently, that every proposition to which we assign a probability must be resolved into a disjunction of elementary ‘atomic’ propositions. Carrying this supposition over into the Bayesian field has led some to reject Bayesian methods on the grounds that, in order to assign a meaningful prior probability to some proposition such as W ≡ the dog walks, we would be obliged to resolve it into a disjunction W = W1 + W2 + · · · of every conceivable subproposition about how the dog does this, such as W1 ≡ first it moves the right forepaw, then the left hindleg, then . . . W2 ≡ first it moves the right forepaw, then the right hindleg, then. . . ... This can be done in any number of different ways, and there is no principle that tells us which resolution is ‘right’. Having defined these subpropositions somehow, there is no evident element of symmetry that could tell us which ones should be assigned equal prior probabilities. Even the professed Bayesian L. J. Savage (1954, 1961, 1962) raised this objection, and thought that it made it impossible to assign priors by the principle of indifference. Curiously, those who reasoned this way seem never to have been concerned about how the orthodox probabilist is to define his ‘universal set’ of atomic propositions, which performs for him the same function as would that infinitely fine-grained resolution of the dog’s movements.

8.11 Sam’s broken thermometer If Sam, in analyzing his data to test his pet theory, wants to entertain the possibility that his thermometer is broken, does he need to enumerate every conceivable way in which it could be broken? The answer is not intuitively obvious at first glance, so let A ≡ Sam’s pet theory, Ho ≡ the thermometer is working properly, Hi ≡ the thermometer is broken in the ith way, 1 ≤ i ≤ n, where, perhaps, n = 1000. Then, although p(A|D H0 I ) = p(A|H0 I )

p(D|AH0 I ) p(D|H0 I )

(8.64)

is the Bayesian calculation Sam would like to do, it seems that honesty compels him to note 1000 other possibilities {H1 , . . . , Hn }, and so he must do the calculation p(A|D I ) =

n i=0

p(AHi |D I ) = p(A|H0 D I ) p(H0 |I ) +

n

p(A|Hi D I ) p(Hi |D I ).

i=1

(8.65)

8 Sufficiency, ancillarity, and all that

263

Now expand the last term by Bayes’ theorem: p(A|Hi D I ) = p(A|Hi I ) p(Hi |D I ) = p(Hi |I )

p(D|AHi I ) p(D|Hi I )

p(D|Hi I ) . p(D|I )

(8.66)

(8.67)

Presumably, knowing the condition of his thermometer does not in itself tell Sam anything about the status of his pet theory, so p(A|Hi I ) = p(A|I ),

0 ≤ i ≤ n.

(8.68)

But if he knew the thermometer was broken, then the data would tell him nothing about his pet theory (all this is supposed to be contained in the prior information I ): p(A|Hi D I ) = p(A|Hi I ) = p(A|I ),

1 ≤ i ≤ n.

(8.69)

Then from (8.66), (8.68) and (8.69) we have p(D|AHi I ) = p(D|Hi I ),

1 ≤ i ≤ n.

(8.70)

That is, if he knows the thermometer is broken, and as a result the data can tell him nothing about his pet theory, then his probability of getting those data cannot depend on whether his pet theory is true. Then (8.65) reduces to

n p(A|I ) p(D|Hi I ) p(Hi |I ) . (8.71) p(D|AH0 I ) p(H0 I ) + p(A|D I ) = p(D|I ) i=1 From this, we see that if the different ways of being broken do not in themselves tell him different things about the data, p(D|Hi I ) = p(D|H1 I ),

1 ≤ i ≤ n,

(8.72)

then enumeration of the n different ways of being broken is unnecessary; the calculation reduces to finding the likelihood L ≡ p(D|AH0 I ) p(H0 |I ) + p(D|H1 I )[1 − p(H0 |I )]

(8.73)

and only the total probability of being broken, p(H 0 |I ) =

n

p(Hi |I ) = 1 − p(H0 |I ),

(8.74)

i=1

is relevant. Sam does not need to enumerate 1000 possibilities. But if p(D|Hi I ) can depend on i, then the sum in (8.71) should be over those Hi that lead to different p(D|Hi I ). That is, information contained in the variations of p(D|Hi I ) would be relevant to his inference, and so they should be taken into account in a full calculation.

264

Part 1 Principles and elementary applications

Contemplating this argument, common sense now tells us that this conclusion should have been ‘obvious’ from the start. Quite generally, enumeration of a large number of ‘finegrained’ propositions and assigning prior probabilities to all of them is necessary only if the breakdown into those fine details contains information relevant to the question being asked. If they do not, then only the disjunction of all of the propositions is relevant to our problem, and we need only assign a prior probability directly to it. In practice, this means that in a real problem there will be some natural end to the process of introducing finer and finer subpropositions; not because it is wrong to introduce them, but because it is unnecessary and it contributes nothing to the solution of the problem. The difficulty feared by Savage does not arise in real problems; and this is one of the many reasons why our policy of assigning probabilities on finite sets succeeds in the real world. 8.12 Comments There are still a number of interesting special circumstances, less important technically but calling for short discussions. Trying to conduct inference by inventing intuitive ad hoc devices instead of applying probability theory has become such a deeply ingrained habit among those with conventional training that, even after seeing the Cox theorems and the applications of probability theory as logic, many fail to appreciate what has been shown, and persist in trying to improve the results – without acquiring any more information – by adding further ad hoc devices to the rules of probability theory. We offer here three observations intended to discourage such efforts, by noting what information is and is not contained in our equations. 8.12.1 The fallacy of sample re-use Richard Cox’s theorems show that, given certain data and prior information D, I , any procedure which leads to a different conclusion than that of Bayes’ theorem, will necessarily violate some very elementary desideratum of consistency and rationality. This implies that a single application of Bayes’ theorem with given D, I will extract all the information that is in D, I , relevant to the question being asked. Furthermore, we have already stressed that, if we apply probability theory correctly, there is no need to check whether the different pieces of information used are logically independent; any redundant information will cancel out and will not be used twice.7 The feeling persists that, somehow, using the same data again in some other procedure might extract still more information from D that Bayes’ theorem has missed the first time, and thus improve our ultimate inferences from D. Since there is no end to the conceivable arbitrary devices that might be invented, we see no way to prove once and for all that no such attempt will succeed, other than pointing to Cox’s theorems. But for any particular device we can always find a direct proof that it will not work; that is, the device cannot 7

Indeed, this is a property of any algorithm, in or out of probability theory, which can be derived from a constrained variational principle, because adding a new constraint cannot change the solution if the old solution already satisfied that constraint.

8 Sufficiency, ancillarity, and all that

265

change our conclusions unless it also violates one of our Chapter 2 desiderata of rationality. We consider one commonly encountered example. Having applied Bayes’ theorem with given D, I to find the posterior probability p(θ|D I ) = p(θ|I )

p(D|θ I ) p(D|I )

(8.75)

for some parameter θ, suppose we decide to introduce some additional evidence E. Then another application of Bayes’ theorem updates that conclusion to p(θ|E D I ) = p(θ|D I )

p(E|θ D I ) , p(E|D I )

(8.76)

so the necessary and sufficient condition that the new information will change our conclusions is that, on some region of the parameter space of positive measure, the likelihood ratio in (8.76) differs from unity: p(E|θ D I ) = p(E|D I ).

(8.77)

But if the evidence E was something already implied by the data and prior information, then p(E|θ D I ) = p(E|D I ) = 1,

(8.78)

and Bayes’ theorem confirms that re-using redundant information cannot change the results. This is really only the principle of elementary logic: A A = A. There is a famous case in which it appeared at first glance that one actually did get important improvement in this way; this leads us to recognize that the meaning of ‘logical independence’ is subtle and crucial. Suppose we take E = D; we simply use the same data set twice. But we act as if the second D were logically independent of the first D; that is, although they are the same data, let us call them D ∗ the second time we use them. Then we simply ignore the fact that D and D ∗ are actually one and the same data set, and instead of (8.76)–(8.78) we take, in violation of the rules of probability theory, p(D ∗ |D I ) = p(D ∗ |I )

and

p(D ∗ |θ D I ) = p(D ∗ |θ I ).

(8.79)

Then the likelihood ratio in (8.76) is the same as in the first application of Bayes’ theorem, (8.75). We have squared the likelihood function, thus achieving a sharper posterior distribution with apparently more accurate estimate of θ! It is evident that a fraud is being perpetrated here; by the same argument we could re-use the same data any number of times, thus raising the likelihood function to an arbitrarily high power, and seemingly getting arbitrarily accurate estimates of θ – all from the same original data set D which might consist of only one or two observations. If we actually had two different data sets D, D ∗ which were logically independent, in the sense that knowing one would tell us nothing about the other – but which happened to be numerically identical – then indeed (8.79) would be valid, and the correct likelihood function from the two data sets would be the square of the likelihood from one of them.

266

Part 1 Principles and elementary applications

Therefore the fraudulent procedure is, in effect, claiming to have twice as many observations as we really have. One can find this procedure actually used and advocated in the literature, in the guise of a ‘data dependent prior’ (Akaike, 1980). This is also close to the topic of ‘meta-analysis’ discussed earlier, where ludicrous errors can result from failure to perceive the logical dependence of different data sets which are causally independent. The most egregious example of attempted sample re-use is in the aforementioned ‘randomization tests’, in which every one of the n! permutations of the data is thought to contain new evidence relevant to the problem! We examine this astonishing view and its consequences in Chapter 17. 8.12.2 A folk theorem In ordinary algebra, suppose that we have a number of unknowns {x1 , . . . , xn } in some domain X to be determined, and are given the values of m functions of them: y1 = f 1 (x1 , . . . , xn ) y2 = f 2 (x1 , . . . , xn ) ... ym = f m (x1 , . . . , xn ).

(8.80)

If m = n and the Jacobian ∂(y1 , . . . , yn )/∂(x1 , . . . , xn ) is not zero, then we can in principle solve for the xi uniquely. But if m < n the system is underdetermined; one cannot find all the xi because the information is insufficient. It appears that this well-known theorem of algebra has metamorphosed into a popular folk theorem of probability theory. Many authors state, as if it were an evident truth, that from m observations one cannot estimate more than m parameters. Authors with the widest divergence of viewpoints in other matters seem to be agreed on this. Therefore we almost hesitate to point out the obvious; that nothing in probability theory places any such limitation on us. In probability theory, as our data tend to zero, the effect is not that fewer and fewer parameters can be estimated; given a single observation, nothing prevents us from estimating a million different parameters. What happens as our data tend to zero is that those estimates just relax back to the prior estimates, as common sense tells us they must. There may still be a grain of truth in this, however, if we consider a slightly different scenario; instead of varying the amount of data for a fixed number of parameters, suppose we vary the number of parameters for a fixed amount of data. Then does the accuracy of our estimate of one parameter depend on how many other parameters we are estimating? We note verbally what one finds, leaving it as an exercise for the reader to write down the detailed equations. The answer depends on how the sampling distributions change as we add new parameters; are the posterior pdfs for the parameters independent? If so, then our estimate of one parameter cannot depend on how many others are present. But if in adding new parameters they all get correlated in the posterior pdf, then the estimate of one parameter θ might be greatly degraded by the presence of others (uncertainty in the values of the other parameters could then ‘leak over’ and contribute to the uncertainty

8 Sufficiency, ancillarity, and all that

267

in θ). In that case, it may be that some function of the parameters can be estimated more accurately than can any one of them. For example, if two parameters have a high negative correlation in the posterior pdf, then their sum can be estimated much more accurately than can their difference.8 All these subtleties are lost on orthodox statistics, which does not recognize even the concept of correlations in a posterior pdf. 8.12.3 Effect of prior information As we noted above, it is obvious, from the general principle of non-use of redundant information A A = A, that our data make a difference only when they tell us something that our prior information does not. It should be (but apparently is not) equally obvious that prior information makes a difference only when it tells us something that the data do not. Therefore, whether our prior information is or is not important can depend on which data set we get. For example, suppose we are estimating a general parameter θ , and we know in advance that θ < 6. If the data lead to a negligible likelihood in the region θ > 6, then that prior information has no effect on our conclusions. Only if the data alone would have indicated appreciable likelihood in θ > 6 does the prior information matter. But consider the opposite extreme: if the data placed practically all the likelihood in the region θ > 6, then the prior information would have overwhelming importance and the robot would be led to an estimate very nearly θ ∗ = 6, determined almost entirely by the prior information. But in that case the evidence of the data strongly contradicts the prior information, and we would become skeptical about the correctness of the prior information, the model, or the data. This is another case where astonishing new information may cause resurrection of alternative hypotheses that we always have lurking somewhere in our minds. The robot, by design, has no creative imagination and always believes literally what we tell it; and so, if we fail to tell it about any alternative hypotheses, it will continue to give us the best estimates based on unquestioning acceptance of the hypothesis space that we gave it – right up to the point where the data and the prior information become logically contradictory – at which point, as noted at the end of Chapter 2, the robot crashes. In principle, a single data point could determine accurate values of a million parameters. √ For example, if a function f (x1 , x2 , . . .) of √one million variables takes on the value 2 only at a single point, and we learn that f = 2 exactly, then we have determined one million variables exactly. Or, if a single parameter is determined to an accuracy of 12 decimal digits, a simple mapping can convert this into estimates of six parameters to two digits each. But this gets us into the subject of ‘algorithmic complexity’, which is not our present topic. 8.12.4 Clever tricks and gamesmanship Two very different attitudes toward the technical workings of mathematics are found in the literature. In 1761, Leonhard Euler complained about isolated results which ‘are not based 8

We shall see this in Chapter 18, in the theory of seasonal adjustment in economics. The phenomenon is demonstrated and discussed in detail in Jaynes (1985e); conventional non-Bayesian seasonal adjustment loses important information here.

268

Part 1 Principles and elementary applications

on a systematic method’ and therefore whose ‘inner grounds seem to be hidden’. Yet in the 20th century, writers as diverse in viewpoint as Feller and de Finetti are agreed in considering computation of a result by direct application of the systematic rules of probability theory as dull and unimaginative, and revel in the finding of some isolated clever trick by which one can see the answer to a problem without any calculation. For example, Peter and Paul toss a coin alternately starting with Peter, and the one who first tosses ‘heads’ wins. What are the probabilities p, p for Peter or Paul to win? The direct, systematic computation would sum (1/2)n over the odd and even integers: p=

∞

1

n=0

22n+1

=

2 , 3

p =

∞ 1 1 = . 2n 2 3 n=1

(8.81)

The clever trick notes instead that Paul will find himself in Peter’s shoes if Peter fails to win on the first toss: ergo, p = p/2, so p = 2/3, p = 1/3. Feller’s perception was so keen that in virtually every problem he was able to see a clever trick; and then gave only the clever trick. So his readers get the impression that: (1) probability theory has no systematic methods; it is a collection of isolated, unrelated clever tricks, each of which works on one problem but not on the next one; (2) Feller was possessed of superhuman cleverness; (3) only a person with such cleverness can hope to find new useful results in probability theory.

Indeed, clever tricks do have an aesthetic quality that we all appreciate at once. But we doubt whether Feller, or anyone else, was able to see those tricks on first looking at the problem. We solve a problem for the first time by that (perhaps dull to some) direct calculation applying our systematic rules. After seeing the solution, we may contemplate it and see a clever trick that would have led us to the answer much more quickly. Then, of course, we have the opportunity for gamesmanship by showing others only the clever trick, scorning to mention the base means by which we first found the answer. But while this may give a boost to our ego, it does not help anyone else. Therefore we shall continue expounding the systematic calculation methods, because they are the only ones which are guaranteed to find the solution. Also, we try to emphasize general mathematical techniques which will work not only on our present problem, but on hundreds of others. We do this even if the current problem is so simple that it does not require those general techniques. Thus we develop the very powerful algorithms involving group invariance, partition functions, entropy, and Bayes’ theorem, that do not appear at all in Feller’s work. For us, as for Euler, these are the solid meat of the subject, which make it unnecessary to discover a different new clever trick for each new problem. We learned this policy from the example of George P´olya. For a century, mathematicians had been, seemingly, doing their best to conceal the fact that they were finding their theorems first by the base methods of plausible conjecture, and only afterward finding the ‘clever trick’ of an effortless, rigorous proof. P´olya (1954) gave away the secret in his Mathematics and Plausible Reasoning, which was a major stimulus for the present work.

8 Sufficiency, ancillarity, and all that

269

Clever tricks are always pleasant diversions, and useful in a temporary way, when we want only to convince someone as quickly as possible. Also, they can be valuable in understanding a result; having found a solution by tedious calculation, if we can then see a simple way of looking at it that would have led to the same result in a few lines, this is almost sure to give us a greater confidence in the correctness of the result, and an intuitive understanding of how to generalize it. We point this out many times in the present work. But the road to success in probability theory goes first through mastery of the general, systematic methods of permanent value. For a teacher, therefore, maturity is largely a matter of overcoming the urge to gamesmanship.

9 Repetitive experiments: probability and frequency

The essence of the present theory is that no probability, direct, prior, or posterior, is simply a frequency. H. Jeffreys (1939) We have developed probability theory as a generalized logic of plausible inference which should apply, in principle, to any situation where we do not have enough information to permit deductive reasoning. We have seen it applied successfully in simple prototype examples of nearly all the current problems of inference, including sampling theory, hypothesis testing, and parameter estimation. Most of probability theory, however, as treated in the past 100 years, has confined attention to a special case of this, in which one tries to predict the results of, or draw inferences from, some experiment that can be repeated indefinitely under what appear to be identical conditions; but which nevertheless persists in giving different results on different trials. Indeed, virtually all application-oriented expositions define probability as meaning ‘limiting frequency in independent repetitions of a random experiment’ rather than as an element of logic. The mathematically oriented often define it more abstractly, merely as an additive measure, without any specific connection to the real world. However, when they turn to applications, they too tend to think of probability in terms of frequency. It is important that we understand the exact relationship between these conventional treatments and the theory being developed here. Some of these relationships have been seen already; in the preceding five chapters we have shown that probability theory as logic can be applied consistently in many problems of inference that do not fit into the frequentist preconceptions, and so would be considered beyond the scope of probability theory. Evidently, the problems that can be solved by frequentist probability theory form a subclass of those that are amenable to probability theory as logic, but it is not yet clear just what that subclass is. In the present chapter we seek to clarify this, with some surprising results, including a better understanding of the role of induction in science. There are also many problems where the attempt to use frequentist probability theory in inference leads to nonsense or disaster. We postpone examination of this pathology to later chapters, particularly Chapter 17. 270

9 Repetitive experiments: probability and frequency

271

9.1 Physical experiments Our first example of such a repetitive experiment appeared in Chapter 3, where we considered sampling with replacement from an urn, and noted that even there great complications arise. But we managed to muddle our way through them by the conceptual device of ‘randomization’ which, although ill-defined, had enough intuitive force to overcome the fundamental lack of logical justification. Now we want to consider general repetitive experiments where there need not be any resemblance to drawing from an urn, and for which those complications may be far greater and more diverse than they were for the urn. But at least we know that any such experiment is subject to physical law. If it consists of tossing a coin or die, it will surely conform to the laws of Newtonian mechanics, well known for 300 years. If it consists of giving a new medicine to a variety of patients, the principles of biochemistry and physiology, only partially understood at present, surely determine the possible effects that can be observed. An experiment in high-energy elementary particle physics is subject to physical laws about which we are about equally ignorant; but even here well-established general principles (conservation of charge, angular momentum, etc.) restrict the possibilities. Clearly, competent inferences about any such experiment must take into account whatever is currently known concerning the physical laws that apply to the situation. Generally, this knowledge will determine the ‘model’ that we prescribe in the statement of the problem. If one fails to take account of the real physical situation and the known physical laws that apply, then the most impeccably rigorous mathematics from that point on will not guard against producing nonsense or worse. The literature gives much testimony to this. In any repeatable experiment or measurement, some relevant factors are the same at each trial (whether or not the experimenter is consciously trying to hold them constant – or is even consciously aware of them), and some vary in a way not under the control of the experimenter. Those factors that are the same (whether from the experimenter’s good control of conditions or from his failure to influence them at all) are called systematic. Those factors which vary in an uncontrolled way are often called random, a term which we shall usually avoid, because in current English usage it carries some very wrong connotations.1 We should call them, rather, irreproducible by the experimental technique used. They might become reproducible by an improved technique; indeed, the progress of all areas of experimental science involves the continual development of more powerful techniques that exert finer control over conditions, making more effects reproducible. Once a phenomenon becomes reproducible, as has happened in molecular biology, it emerges from the cloud of speculation and fantasy to become a respectable part of ‘hard’ science. In this chapter we examine in detail how our robot reasons about a repetitive experiment. Our aim is to find the logical relations between the information it has and the kind of 1

To many, the term ‘random’ signifies on the one hand lack of physical determination of the individual results, but, at the same time, operation of a physically real ‘propensity’ rigidly fixing long-run frequencies. Naturally, such a self-contradictory view of things gives rise to endless conceptual difficulties and confusion throughout the literature of every field that uses probability theory. We note some typical examples in Chapter 10, where we confront this idea of ‘randomness’ with the laws of physics.

272

Part 1 Principles and elementary applications

predictions it is able to make. Let our experiment consist of n trials, with m possible results at each trial; if it consists of tossing a coin, then m = 2; for a die, m = 6. If we are administering a vaccine to a sequence of patients, then m is the number of distinguishable reactions to the treatment, n is the number of patients, etc. At this point, one would say, conventionally, something like: ‘Each trial is capable of giving any one of m possible results, so in n trials there are N = m n different conceivable outcomes.’ However, the exact meaning of this is not clear: is it a statement or an assumption of physical fact, or only a description of the robot’s information? The content and range of validity of what we are doing depends on the answer. The number m may be regarded, always, as a description of the state of knowledge in which we conduct a probability analysis; but this may or may not correspond to the number of real possibilities actually existing in Nature. On examining a cubical die, we feel rather confident in taking m = 6; but in general we cannot know in advance how many different results are possible. Some of the most important problems of inference are of the ‘Charles Darwin’ type.

Exercise 9.1. When Charles Darwin first landed on the Galapagos Islands in September 1835, he had no idea how many different species of plants he would find there. Having examined n = 122 specimens, and finding that they can be classified into m = 19 different species, what is the probability that there are still more species, as yet unobserved? At what point does one decide to stop collecting specimens because it is unlikely that anything more will be learned? This problem is much like that of the sequential test of Chapter 4, although we are now asking a different question. It requires judgment about the real world in setting up the mathematical model (that is, in the prior information used in choosing the appropriate hypothesis space), but persons with reasonably good judgment will be led to substantially the same conclusions.

In general, then, far from being a known physical fact, the number m should be understood to be simply the number of results per trial that we shall take into account in the present calculation. Then it is perhaps being stated most defensibly if we say that when we specify m we are defining a tentative working hypothesis, whose consequences we want to learn. In any event, we are concerned with two different sample spaces; the space S for a single trial, consisting of m points, and the extension space S n = S ⊗ S ⊗ · · · ⊗ S,

(9.1)

the direct product of n copies of S, which is the sample space for the experiment as a whole. For clarity, we use the word ‘result’ for a single trial referring to space S, while ‘outcome’ refers to the experiment as a whole, defined on space S n . Thus, one outcome consists of the enumeration of n results (including their order if the experiment is conducted

9 Repetitive experiments: probability and frequency

273

in such a way that an order is defined). Then we may say that the number of results being considered in the present calculation is m, while the number of outcomes being considered is N = m n . Denote the result of the ith trial by ri (1 ≤ ri ≤ m, 1 ≤ i ≤ n). Then any outcome of the experiment can be indicated by specifying the numbers {r1 , . . . , rn }, which constitute a conceivable data set D. Since the different outcomes are mutually exclusive and exhaustive, if our robot is given any information I about the experiment, the most general probability assignment it can make is a function of the ri : P(D|I ) = p(r1 . . . rn )

(9.2)

satisfying the sums over all possible data sets m m r1 =1 r2 =1

···

m

p(r1 . . . rn ) = 1.

(9.3)

rn =1

As a convenience, since the ri are non-negative integers, we may regard them as digits (modulo m) in a number R expressed in the base m number system; 0 ≤ R ≤ N − 1. Our robot, however poorly informed it may be about the real world, is an accomplished manipulator of numbers, so we may instruct it to communicate with us in the base m number system instead of the decimal (base ten) system that you and I were trained to use because of an anatomical peculiarity of humans. For example, suppose that our experiment consists of tossing a die four times; there are m = 6 possible results at each trial, and N = 64 = 1296 possible outcomes for the experiment, which can be indexed (1 to 1296). Then to indicate the outcome that is designated as number 836 in the decimal system, the robot notes that 836 = (3 × 63 ) + (5 × 62 ) + (1 × 61 ) + (2 × 60 )

(9.4)

and so, in the base six system the robot displays this as outcome number 3512. Unknown to the robot, this has a deeper meaning to you and me; for us, this represents the outcome in which the first toss gave three spots up, the second gave five spots, the third gave one spot, and the fourth toss gave two spots (since in the base six system the individual digits ri have meaning only modulo 6, the display 5024 ≡ 5624 represents an outcome in which the second toss yielded six spots up). More generally, for an experiment with m possible results at each trial, repeated n times, we communicate with the robot in the base m number system, whereupon each number displayed will have exactly n digits, and for us the ith digit will represent, modulo m, the result of the ith trial. By this device we trick our robot into taking instructions and giving its conclusions in a format which has for us an entirely different meaning. We can now ask the robot for its predictions on any question we care to ask about the digits in the display number, and this will never betray to the robot that it is really making predictions about a repetitive physical experiment (for the robot, by construction as discussed in Chapter 4, always accepts what we tell it as the literal truth).

274

Part 1 Principles and elementary applications

With the conceptual problem defined as carefully as we know how to do, we may turn finally to the actual calculations. We noted in the discussion following Eq. (2.86) that, depending on details of the information I , many different probability assignments (9.2) might be appropriate; consider first the obvious simplest case of all.

9.2 The poorly informed robot Suppose we tell the robot only that there are N possibilities, and give no other information. That is, the robot is not only ignorant about the relevant physical laws; it is not even told that the full experiment consists of n repetitions of a simpler one. For it, the situation is as if there were only a single trial, with N possible results, the ‘mechanism’ being completely unknown. At this point, you might object that we have withheld from the robot some very important information that must be of crucial importance for rational inferences about the experiment; and so we have. Nevertheless, it is important that we understand the surprising consequences of neglecting that information. What meaningful predictions about the experiment could the robot possibly make, when it is in such a primitive state of ignorance that it does not even know that there is any repetitive experiment involved? Actually, the poorly informed robot is far from helpless; although it is hopelessly na¨ıve in some respects, nevertheless it is already able to make a surprisingly large number of correct predictions for purely combinatorial reasons (this should give us some respect for the cogency of multiplicity factors, which can mask a lot of ignorance). Let us see first just what those poorly informed predictions are; then we can give the robot additional pertinent pieces of information and see how its predictions are revised as it comes to know more and more about the real physical experiment. In this way we can follow the robot’s education step by step, until it reaches a level of sophistication comparable to (in some cases, exceeding) that displayed by real scientists and statisticians discussing real experiments. Denote this initial state of ignorance (the robot knows only the number N of possible outcomes and nothing else) by I0 . The principle of indifference (2.95) then applies; the robot’s ‘sample space’ or ‘hypothesis space’ consists of N = m n discrete points, and to each it assigns probability N −1 . Any proposition A that is defined to be true on a subset S ⊂ S n and false on the complementary subset S n − S will, by the rule (2.99), then be assigned the probability P(A|I0 ) =

M(n, A) , N

(9.5)

where M(n, A) is the multiplicity of A (number of points of S n on which A is true). This trivial looking result summarizes everything the robot can say on the prior information I0 , and it illustrates again that, whenever they are relevant to the problem, connections between probability and frequency appear automatically, as mathematical consequences of our rules.

9 Repetitive experiments: probability and frequency

275

Consider n tosses of a die, m = 6; the probability (9.2) of any completely specified outcome is 1 1 ≤ ri ≤ 6, 1 ≤ i ≤ n. (9.6) p(r1 . . . rn |I0 ) = n , 6 Then what is the probability that the first toss gives three spots, regardless of what happens later? We ask the robot for the probability that the first digit r1 = 3. Then the 6n−1 propositions A(r2 , . . . , rn ) ≡ r1 = 3 and the remaining digits are r2 , . . . , rn

(9.7)

are mutually exclusive, and so (2.85) applies: P(r1 = 3|I0 ) =

6

···

r2 =1 n−1

6

p(3 r2 . . . rn |I0 )

rn =1

(9.8)

= 6 p(r1 . . . rn |I0 ) = 1/6.

(Note that ‘r1 = 3’ is a proposition, so by our notational rules in Appendix B we are allowed to put it in a formal probability symbol with capital P.) But by symmetry, if we had asked for the probability that any specified (ith) toss gives any specified (kth) result, the calculation would have been the same: P(ri = k|I0 ) = 1/6,

1 ≤ k ≤ 6,

1 ≤ i ≤ n.

(9.9)

Now, what is the probability that the first toss gives k spots, and the second gives j spots? The robot’s calculation is just like the above; the results of the remaining tosses comprise 6n−2 mutually exclusive possibilities, and so P(r1 = k, r2 = j|I0 ) =

6

···

r3 =1 n−2

6

p(k, j, r3 . . . rn |I0 )

rn =1

= 6 p(r1 . . . rn |I0 ) = 1/62 = 1/36,

(9.10)

and by symmetry the answer would have been the same for any two different tosses. Similarly, the robot will tell us that the probability for any specified outcome at any three different tosses is p(ri r j rk |I0 ) = 1/63 = 1/216,

(9.11)

and so on! Let us now try to educate the robot. Suppose we give it the additional information that, to you and me, means that the first toss gave three spots. But we tell this to the robot in the form: out of the originally possible N outcomes, the correct one belongs to the subclass for which the first digit is r1 = 3. With this additional information, what probability will it now assign to the proposition r2 = j? This conditional probability is determined by the

276

Part 1 Principles and elementary applications

product rule (2.63): p(r1r2 |I0 ) , p(r1 |I0 )

(9.12)

1/36 = 1/6 = p(r2 |I0 ). 1/6

(9.13)

p(r2 |r1 I0 ) = or, using (9.9) and (9.10), p(r2 |r1 I0 ) =

The robot’s prediction is unchanged. If we tell it the result of the first two tosses and ask for its predictions about the third, we have from (9.11) the same result: p(r3 |r1r2 I0 ) =

p(r3r1r2 |I0 ) 1/216 = = 1/6 = p(r3 |I0 ). p(r1r2 |I0 ) 1/36

(9.14)

We can continue in this way, and will find that if we tell the robot the results of any number of tosses, this will have no effect at all on its predictions for the remaining ones. It appears that the robot is in such a profound state of ignorance I0 that it cannot be educated. However, if it does not respond to one kind of instruction, perhaps it will respond to another. But first we need to understand the cause of the difficulty.

9.3 Induction In what way does the robot’s behavior surprise us? Its reasoning here is different from the way you and I would reason, in that the robot does not seem to learn from the past. If we were told that the first dozen digits were all 3, you and I would take the hint and start placing our bets on 3 for the next digit. But the poorly informed robot does not take the hint, no matter how many times it is given. More generally, if you or I could perceive any regular pattern in the previous results, we would more or less expect it to continue; this is the reasoning process called induction. The robot does not yet see how to reason inductively. However, the robot must do all things quantitatively, and you and I would have to admit that we are not certain whether the regularity will continue. It only seems somewhat likely, but our intuition does not tell us how likely. So our intuition, as in Chapters 1 and 2, gives us only a qualitative ‘sense of direction’ in which we feel the robot’s quantitative reasoning ought to go. Note that what we are calling induction is a very different process from what is called, confusingly, ‘mathematical induction’. The latter is a rigorous deductive process, and we are not concerned with it here. The problem of ‘justifying induction’ has been a difficult one for the conventional formulations of probability theory, and the nemesis of some philosophers beginning with David Hume (1739, 1777) in the 18th century. For example, the philosopher Karl Popper (1974) has gone so far as to flatly deny the possibility of induction. He asked the rhetorical question: ‘Are we rationally justified in reasoning from repeated instances of which we have experience to instances of which we have no experience?’ This is, quite literally, the poorly informed robot speaking to us, and wanting us to answer ‘No!’ But we want to show that

9 Repetitive experiments: probability and frequency

277

a better informed robot will answer: ‘Yes, if we have prior information providing a logical connection between the different trials’ and give specific circumstances that enable induction to be made. The difficulty has seemed particularly acute in the theory of survey sampling, which corresponds closely to our equations above. Having questioned 1000 people and found that 672 of them favor proposition A in the next election, by what right do the pollsters jump to the conclusion that about 67 ± 3% of the millions not surveyed also favor proposition A? For the poorly informed robot (and, apparently, for Popper too), learning the opinions of any number of persons tells it nothing about the opinions of anyone else. The same logical problem appears in many other scenarios. In physics, suppose we measured the energies of 1000 atoms, and found that 672 of them were in excited states, the rest in the ground state. Do we have any right to conclude that about 67% of the 1023 other atoms not measured are also in excited states? Or, 1000 cancer patients were given a new treatment and 672 of them recovered; then in what sense is one justified in predicting that this treatment will also lead to recovery in about 67% of future patients? On prior information I0 , there is no justification at all for such inferences. As these examples show, the problem of logical justification of induction (i.e., of clarifying the exact meaning of the statements, and the exact sense in which they can be supported by logical analysis) is important as well as difficult. 9.4 Are there general inductive rules? What is shown by (9.13) and (9.14) is that, on the information I0 , the results of different tosses are, logically, completely independent propositions; giving the robot any information whatsoever about the results of specified tosses tells it nothing relevant to any other toss. The reason for this was stressed above: the robot does not yet know that the successive digits {r1 , r2 , . . .} represent successive repetitions of the same experiment. It can be educated out of this state only by giving it some kind of information that has relevance to all tosses; for example, if we tell it something, however slight, about some property – physical or logical – that is common to all trials. Perhaps, then, we might learn by introspection: What is that extra ‘hidden’ information, common to all trials, that you and I are using, unconsciously, when we do inductive reasoning? Then we might try giving this hidden information to the robot (i.e., incorporate it into our equations). A very little introspection is enough to make us aware that there is no one piece of hidden information; there are many different kinds. Indeed, the inductive reasoning that we all do varies widely, even for identical data, as our prior knowledge about the experiment varies. Sometimes we ‘take the hint’ immediately, and sometimes we are as slow to do it as the poorly informed robot. For example, suppose the data are that the first three tosses of a coin have all yielded ‘heads’: D = H1 H2 H3 . What is our intuitive probability P(H4 |D I ) for heads on the fourth toss? This depends very much on what that prior information I is. On prior information

278

Part 1 Principles and elementary applications

I0 the answer is always p(H4 |D I0 ) = 1/2, whatever the data. Two other possibilities are: I1 ≡ We have been allowed to examine the coin carefully and observe the tossing. We know that the coin has a head and a tail and is perfectly symmetrical, with its center of gravity in the right place, and we saw nothing peculiar in the way it was tossed. I2 ≡ We were not allowed to examine the coin, and we are very dubious about the ‘honesty’ of either the coin or the tosser.

On information I1 , our intuition will probably tell us that the prior evidence of the symmetry of the coin far outweighs the evidence of three tosses; so we shall ignore the data and again assign P(H4 |D I1 ) = 1/2. But on information I2 we would consider the data to have some cogency: we would feel that the fact of three heads and no tails constitutes some evidence (although certainly not proof) that some systematic influence is at work favoring heads, and so we would assign P(H4 |D I2 ) > 1/2. Then we would be doing real inductive reasoning. Now we seem to be facing a paradox. For I1 represents a great deal more information than does I2 ; yet it is P(H4 |D I1 ) that agrees with the poorly informed robot! In fact, it is easy to see that all our inferences based on I1 agree with those of the poorly informed robot, as long as the prior evidence of symmetry outweighs the evidence of the data. This is only an example of something that we have surely noted many times in other contexts. The fact that one person has far greater knowledge than another does not mean that they necessarily disagree; an idiot might guess the same truth that a scholar labored for years to discover. All the same, it does call for some deep thought to understand why knowledge of perfect symmetry could leave us making the same inferences as does the poorly informed robot. As a start on this, note that we would not be able to assign any definite numerical value to P(H4 |D I2 ) until that vague information I2 is specified much more clearly. For example, consider the extreme case: I3 ≡ We know that the coin is a trick one, that has either two heads or two tails; but we do not know which.

Then we would, of course, assign P(H4 |D I3 ) = 1; in this state of prior knowledge, the evidence of a single toss is already conclusive. It is not possible to take the hint any more strongly than this. As a second clue, note that our robot did seem, at first glance, to be doing inductive reasoning of a kind back in Chapter 3; for example in (3.14), where we examined the hypergeometric distribution. But on second glance it was doing ‘reverse induction’; the more red balls that had been drawn, the lower its probability for red in the future. And this reverse induction disappeared when we went on to the limit of the binomial distribution.

9 Repetitive experiments: probability and frequency

279

But you and I could also be persuaded to do reverse induction in coin tossing. Consider the prior information: I4 ≡ The coin has a concealed inner mechanism that constrains it to give exactly 50 heads and 50 tails in the next 100 tosses.

On this prior information, we would say that tossing the coin is, for the next 100 times, equivalent to drawing from an urn that contains initially 50 red balls and 50 white ones. We could then use the product rule as in (9.12) but with the hypergeometric distribution h(r |N , M, n) of (3.22): P(H4 |D I4 ) =

0.05873 1 h(4|100, 50, 4) = = 0.4845 < . h(3|100, 50, 3) 0.12121 2

(9.15)

But in this case it is easier to reason it out directly: P(H4 |D I4 ) = (M − 3)/(N − 3) = 47/97 = 0.4845. The great variety of different conclusions that we have found from the same data makes it clear that there can be no such thing as a single universal inductive rule and, in view of the unlimited variety of different kinds of conceivable prior information, makes it seem dubious that there could exist even a classification of all inductive rules by some system of parameters. Nevertheless, such a classification was attempted by the philosopher R. Carnap (1891– 1970), who found (Carnap, 1952) a continuum of rules identified by a single parameter λ (0 < λ < ∞). But ironically, Carnap’s rules turned out to be identical with those given, on the basis of entirely different reasoning, by Laplace in the 18th century (the ‘rule of succession’ and its generalizations) that had been rejected as metaphysical nonsense by statisticians and philosophers.2 Laplace was not considering the general problem of induction, but was only finding the consequences of a certain type of prior information, so the fact that he did not obtain every conceivable inductive rule never arose and would have been of no concern to him. In the meantime, superior analyses of Laplace’s problem had been given by W. E. Johnson (1932), de Finetti (1937) and Harold Jeffreys (1939), of which Carnap seemed unaware. Carnap was seeking the general inductive rule (i.e., the rule by which, given the record of past results, one can make the best possible prediction of future ones). But he suffered from one of the standard occupational diseases of philosophers; his exposition wanders off into abstract symbolic logic without ever considering a specific real example. So he never rises to the level of seeing that different inductive rules correspond to different prior information. It seems to us obvious, from arguments like the above, that this is the primary fact controlling induction, without which the problem cannot even be stated, much less solved; there is no ‘general inductive rule’. Yet neither the term ‘prior information’ nor the concept ever appears in Carnap’s exposition. 2

Carnap (1952, p. 35), like Venn (1866), claims that Laplace’s rule is inconsistent (in spite of the fact that it is identical with his own rule); we examine these claims in Chapter 18 and find, in agreement with Fisher (1956), that they have misapplied Laplace’s rule by ignoring the necessary conditions required for its derivation.

280

Part 1 Principles and elementary applications

This should give a good idea of the level of confusion that exists in this field, and the reason for it; conventional frequentist probability theory simply ignores prior information and – just for that reason – it is helpless to account for induction. Fortunately, probability theory as logic is able to deal with the full problem.

9.5 Multiplicity factors In spite of the formal simplicity of (9.5), the actual numerical evaluation of P(A|I0 ) for a complicated proposition A may involve immense combinatorial calculations. For example, suppose we toss a die twelve times. The number of conceivable outcomes is 612 = 2.18 × 109 ,

(9.16)

which is about equal to the number of minutes since the Great Pyramid was built. The geologists and astrophysicists tell us that the age of the universe is of the order of 1010 years, or 3 × 1017 seconds. Thus, in 30 tosses of a die, the number of possible outcomes (630 = 2.21 × 1023 ) is about equal to the number of microseconds in the age of the universe. Yet we shall be particularly interested in evaluating quantities like (9.5) pertaining to a famous experiment involving 20 000 tosses of a die! It is true that we are concerned with finite sets; but they can be rather large and we need to learn how to calculate on them. An exact calculation will generally involve intricate number-theoretic details (such as whether n is a prime number, whether it is odd or even, etc.), and may require many different analytical expressions for different n. While we could make some further progress by elementary methods, any real facility in these calculations requires some more sophisticated mathematical techniques. We digress to collect some of the basic mathematical facts needed for them. These were given, for the most part, by Laplace, J. Willard Gibbs, and Claude Shannon. In view of the large numbers, there turn out to be extremely good approximations which are easy to calculate. A large class of problems may be fit into the following scheme, for which we can indicate the exact calculation that should, in principle, be done. Let {g1 , g2 , . . . , gm } be any set of m finite real numbers. For concreteness, one may think of g j as the ‘value’ or the ‘gain’ of observing the jth result in any trial (perhaps the number of pennies we win whenever that result occurs), but the following considerations are independent of whatever meaning we attach to the {g j }, with the proviso that they are additive; i.e., sums such as g1 + g2 are to be, like sums of pennies, meaningful to us. We could, equally well, make it more abstract by saying simply that we are concerned with predicting linear functions of the n j . The total amount of G generated by the experiment is then G=

n i=1

g(ri ) =

m j=1

n jgj,

(9.17)

9 Repetitive experiments: probability and frequency

281

where the sample number n j is the number of times the jth result occurred. If we ask the robot for the probability for obtaining this amount, it will answer, from (9.5), p(G|n, I0 ) = f (G|n, I0 ) =

M(n, G) , N

(9.18)

where N = m n and M(n, G) is the multiplicity of the event G; i.e., the number of different outcomes which yield the value G (we now indicate in it also the number of trials n – to the robot, the number of digits needed to define an outcome – because we want to allow this to vary). Many probabilities are determined by this multiplicity factor, in its dependence on n and G.

9.6 Partition function algorithms Expanding M(n, G) according to the result of the nth trial gives the recursion relation M(n, G) =

m

M(n − 1, G − g j ).

(9.19)

j=1

For small n, a computer could apply this n times for direct evaluation of M(n, G), but this would be impractical for very large n. Equation (9.19) is a linear difference equation with constant coefficients in both n and G, so it must have elementary solutions of exponential form: exp{αn + λG}.

(9.20)

On substitution into (9.19), we find that this is a solution of the difference equation if α and λ are related by exp{α} = Z (λ) ≡

m

exp{−λg j }.

(9.21)

j=1

The function Z (λ) is called the partition function, and it will have a fundamental importance throughout all of probability theory. An arbitrary superposition of such elementary solutions: (9.22) H (n, G) = dλ Z n (λ) exp{λG}h(λ) is, from linearity, a formal solution of (9.19). However, the true M(n, G) also satisfies the initial condition M(0, G) = δ(G, 0), and is defined only for certain discrete values of G = n j g j , the values that are possible results of n trials. Further elaboration of (9.22) leads to analytical methods of calculation that will be used in the advanced applications in the later chapters; but for the present let us note the remarkable things that can be done just with algebraic methods. Equation (9.22) has the form of an inverse Laplace transform. To find the discrete Laplace transform of M(n, G) multiply M(n, G) by exp{−λG} and sum over all possible values

282

Part 1 Principles and elementary applications

of G. This sum contains a contribution from every possible outcome of the experiment, and so it can be expressed equally well as a sum over all possible sample numbers: % & exp {−λG} M(n, G) = W (n 1 , . . . , n m ) exp −λ n jgj , (9.23) n j ∈U

G

where the multinomial coefficient W (n 1 , . . . , n m ) ≡

n! n1! · · · nm !

(9.24) n

is the number of outcomes which lead to the sample numbers {n j }. If x j j = exp{−n j g j } then exp{− mj n j g j } = x1n 1 x2n 2 . . . xmn m . The multinomial expansion is defined by W (n 1 , . . . , n m )x1n 1 . . . xmn m . (9.25) (x1 + · · · + xm )n = n j ∈U

In (9.23) we sum over the ‘universal set’ U , defined by U : n j ≥ 0,

m

nj = n ,

(9.26)

j=1

which consists of all possible sample numbers in n trials. But, comparing (9.23) with (9.25), this is just exp{−λG}M(n, G) = Z n (λ). (9.27) G

Equation (9.27) says that the number of ways M(n, G) in which a particular value G can be realized is just the coefficient of exp{−λG} in Z n (λ); in other words, Z (λ) raised to the nth power displays the exact way in which all the possible outcomes in n trials are partitioned among the possible values of G, which indicates why the name ‘partition function’ is appropriate.

9.6.1 Solution by inspection In some simple problems, this observation gives us the solution by mere inspection of Z n (λ). For example, if we make the choice g j ≡ δ( j, 1), then the total G is just the first sample number: n j g j = n1. G=

(9.28)

(9.29)

j

The partition function (9.21) is then Z (λ) = exp{−λ} + m − 1

(9.30)

9 Repetitive experiments: probability and frequency

and, from Newton’s binomial expansion, n

n n Z (λ) = exp{−λs}(m − 1)n−s . s s=0 M(n, G) = M(n, n 1 ) is then the coefficient of exp{−λn 1 } in this expression:

n (m − 1)n−n 1 . M(n, G) = M(n, n 1 ) = n1

283

(9.31)

(9.32)

In this simple case, the counting could have been done also as: M(n, n 1 ) = (number of ways of choosing n 1 trials out of n) × (number of ways of allocating the remaining m − 1 trial results to the remaining n − n 1 trials). However, the partition function method works just as well in more complicated problems; and even in this example the partition function method, once understood, is easier to use. In the choice (9.28) we separated off the trial result j = 1 for special attention. More generally, suppose we separate the m trial results comprising the sample space S arbitrarily into a subset S containing s of them, and the complementary subset S consisting of the (m − s) remaining ones, where 1 < s < m. Call any result in the subset S a ‘success’, any in S a ‘failure’. Then we replace (9.28) by 1 j ∈ S (9.33) gj = 0 otherwise, and (9.29)–(9.32) are generalized as follows. G is now the total number of successes, called traditionally r : G=

m

n j g j ≡ r,

(9.34)

j=1

and the partition function now becomes Z (λ) = s exp{−λ} + m − s, from which Z n (λ) =

n

n

(9.35)

s r exp{−λr }(m − s)n−r ,

(9.36)

n r M(n, G) = M(n, r ) = s (m − s)n−r . r

(9.37)

r =0

r

and so the coefficient of exp{−λr } is

From (9.18), the poorly informed robot’s probability for r successes is therefore

n r p (1 − p)n−r , 0 ≤ r ≤ n, P(G = r |I0 ) = r

(9.38)

284

Part 1 Principles and elementary applications

where p = s/m. But this is just the binomial distribution b(r |n, p), whose derivation cost us so much conceptual agonizing in Chapter 3. There we found the binomial distribution (3.86) as the limiting form in drawing from an infinitely large urn, and again as a randomized approximate form (3.92) in drawing with replacement from a finite urn; but in neither case was it exact for a finite urn. Now we have found a case where the binomial distribution arises for a different reason, and it is exact for a finite sample space. This quantitative exactness is a consequence of our making the problem more abstract; there is now, in the prior information I0 , no mention of complicated physical properties such as those of urns, balls, and hands reaching in. But more important, and surprising, is simply the qualitative fact that the binomial distribution, ostensibly arising out of repeated sampling, has appeared in the inferences of a robot so poorly informed that it does not even have the concept of repetitions! In other words, the binomial distribution has an exact combinatorial basis, completely independent of the notion of ‘repetitive sampling’. This gives us a clue toward understanding how the poorly informed robot functions. In conventional probability theory, starting with James Bernoulli (1713), the binomial distribution has always been derived from the postulate that the probability for any result is to be the same at each trial, strictly independent of what happens at any other trial. But, as we have noted already, that is exactly what the poorly informed robot would say – not out of its knowledge of the physical conditions of the experiment, but out of its complete ignorance of what is happening. Now we could go through many other derivations and we would find that this agreement persists: the poorly informed robot will find not only the binomial but also its generalization, the multinomial distribution, as combinatorial theorems.

Exercise 9.2. Derive the multinomial distribution found in Chapter 3, Eq. (3.77), as a generalization or extension of our derivation of (9.38).

Then all the usual probability distributions of sampling theory (Poisson, gamma, Gaussian, chi-squared, etc.) will follow as limiting forms of these. All the results that conventional probability theory has been obtaining from the frequency definition, and the assumption of strict independence of different trials, are just what the poorly informed robot would find in the same problems. In other words, frequentist probability theory is, functionally, just the reasoning of the poorly informed robot. Then, since the poorly informed robot is unable to do inductive reasoning, we begin to understand why conventional probability theory has trouble with it. Until we learn how to introduce some kind of logical connection between the results of different trials, the results of any trials cannot tell us anything about any other trial, and it will be impossible to ‘take the hint’. Frequentist probability theory seems to be stuck with independent trials because it lays great stress on limit theorems, and examination of them shows that their derivation depends

9 Repetitive experiments: probability and frequency

285

entirely on the strict independence of different trials. The slightest positive correlation between the results of different trials will render those theorems qualitatively wrong. Indeed, without that strict independence, not only limit theorems, but virtually all of the sampling distributions for estimators, on which orthodox statistics depends, would be incorrect. Here the poorly informed robot would seem to have the tactical advantage; for all those limit theorems and sampling distributions for estimators are valid exactly on information I0 . There is another important difference; in conventional probability theory that ‘independence’ is held to mean causal physical independence; but how is one to judge this as a property of the real world? We have seen no discussion of this in the orthodox literature. To the robot it means logical independence, a stronger condition, but one that makes its calculations cleaner and simpler. Solution by inspection of Z n (λ) has the merit that it yields exact results. However, only relatively simple problems can be solved in this way. We now note a much more powerful algebraic method.

9.7 Entropy algorithms We return to the problem of calculating multiplicities as in (9.18)–(9.37), but in a little more general formulation. Consider a proposition A(n 1 , . . . , n m ) which is a function of the sample numbers n j ; it is defined to be true when (n 1 , . . . , n m ) are in some subset R ∈ U , where U is the universal set (9.26), and false when they are in the complementary set R = U − R. If A is linear in the n j , then it is the same as our G in (9.17). The multiplicity of A (number of outcomes for which it is true) is W (n 1 , . . . , n m ), (9.39) M(n, A) = n j ∈R

where the multinomial coefficient W was defined in (9.24). How many terms T (n, m) are in the sum (9.39)? This is a well-known combinatorial problem for which the reader will easily find the solution3

n+m−1 (n + m − 1)! = , (9.40) T (n, m) = n n!(m − 1)! and we note that, as n → ∞, T (n, m) ∼

n m−1 . (m − 1)!

(9.41)

The number of terms grows as a finite [(m − 1)th] power of n (as can be seen intuitively by thinking of the n j as Cartesian coordinates in an m-dimensional space and noting the geometrical meaning of the conditions (9.26) defining U ). Denote the greatest term in the 3

Physicists will recognize T (n, m) as the ‘Bose–Einstein multiplicity factor’ of statistical mechanics (the number of linearly independent quantum states which can be generated by putting n Bose–Einstein particles into m single-particle states). Finding T (n, m) is the same combinatorial problem.

286

Part 1 Principles and elementary applications

region R by Wmax ≡ Max R W (n 1 , . . . , n m ).

(9.42)

Then the sum (9.39) cannot be less than Wmax , and the number of terms in (9.39) cannot be greater than T (n, m), so Wmax ≤ M(n, A) ≤ Wmax T (n, m)

(9.43)

or 1 1 1 1 log(Wmax ) ≤ log M(n, A) ≤ log(Wmax ) + log T (n, m). n n n n But as n → ∞, from (9.41), we have 1 log T (n, m) → 0, n

(9.44)

(9.45)

and so 1 1 log M(n, A) → log(Wmax ). (9.46) n n The multinomial coefficient W grows so rapidly with n that in the limit the single maximum term in the sum (9.39) dominates it. The logarithm of T grows less rapidly than n, so in the limit it makes no difference in (9.44). Then how does log(W/n) behave in the limit? The limit we want is the one in which the sample frequencies f j = n j /n tend to constants; in other words, the limit as n → ∞ of n! 1 log (9.47) n (n f 1 )! · · · (n f m )! as the f j are held constant. But, from the Stirling asymptotic approximation,

√ 1 , log(n!) ∼ n log(n) − n + log 2πn + O n

(9.48)

we find that, in the limit, log(W/n) tends to a finite constant value independent of n: m 1 log(W ) → H ≡ − f j log( f j ), n j=1

(9.49)

which is just what we call the entropy of the frequency distribution { f 1 , . . . , f m }. We have the result that, for very large n, if the sample frequencies f j tend to constants, the multiplicity of A goes into a surprisingly simple expression: M(n, A) ∼ exp{n H },

(9.50)

in the sense that the ratio of the two sides in (9.50) tends to unity (although their difference does not tend to zero; but they are both growing so rapidly that this makes no percentage difference in the limit). From (9.46) it is understood that in (9.50) the frequencies f j = n j /n to be used in H are the ones which maximize H over the region R for which A is defined.

9 Repetitive experiments: probability and frequency

287

We now see what was not evident before; that this multiplicity is to be found by determining the frequency distribution { f 1 , . . . , f m } which has maximum entropy subject to whatever constraints define R.4 It requires some thought and analysis to appreciate what we have in (9.50). Note first that we now have the means to complete the calculations which require explicit values for the multiplicities M(n, G). Before proceeding to calculate the entropy, let us note briefly how this will go. If A is linear in the n j , then the multiplicity (9.50) is also equal asymptotically to M(n, G) = exp{n H },

(9.51)

and so the probability for realizing the total G is, from (9.18) , p(G|n, I0 ) = m −n exp{n H } = exp{−n(H0 − H )},

(9.52)

where H0 = log(m) is the absolute maximum of the entropy, derived below in (9.74). Often, the quantity most directly relevant is not the entropy, but the difference between the entropy and its maximum possible value; this is a direct measure of how strong are the constraints R. For many purposes it would have been better if entropy had been defined as that difference; but the historical precedence would be very hard to change now. In any event, (9.52) has some deep intuitive meaning that we develop in later chapters. Let us note the effect of acquiring new information; now we learn that a specified trial yielded the amount g j . This new information changes the multiplicity of A because now the remaining (n − 1) trials must have yielded the total amount (G − g j ), and the number of ways this could happen is M(n − 1, G − g j ). Also, the frequencies are slightly changed, because one trial that yielded g j is now absent from the counting. Instead of f k = n k /n in (9.18), we now have the frequencies { f 1 , . . . , f m }, where f k =

n k − δ jk , n−1

1 ≤ k ≤ m,

(9.53)

or writing f k = f k + δ f k , the change is f k − δ jk , (9.54) n−1 which is exact; as a check, note that f k = 1 and δ f k = 0, as it should be. This small change in frequencies induces a small change in the entropy; writing the new value as H = H + δ H , we find

∂H H + log( f j ) 1 1 δ fk + O + O = , (9.55) δH = 2 2 ∂ f n n − 1 n k k δ fk =

4

We now also see that, not only is the notion of entropy inherent in probability theory independently of the work of Shannon, the maximum entropy principle is also, at least in this case, derivable directly from the rules of probability theory without additional assumptions.

288

Part 1 Principles and elementary applications

and so H =

n H + log( f j ) +O n−1

1 n2

.

(9.56)

Then the new multiplicity is, asymptotically,

1 . M(n − 1, G − g j ) = exp{(n − 1)H } = f j exp{n H } 1 + O n

(9.57)

The asymptotic forms of multiplicity are astonishingly simple compared with the exact expressions. This means that, contrary to first appearances when we noted the enormous size of the extension set S n , the large n limit is by far the easiest thing to calculate when we have the right mathematical machinery. Indeed, the set S n has disappeared from our considerations; the remaining problem is to calculate the f k that maximize the entropy (9.49) over the domain R. But this is a problem that is solved on the sample space S of a single trial! The probability for getting the total gain G is changed from (9.52) to p(G|ri = j, n I0 ) =

M(n − 1, G − g j ) , m n−1

(9.58)

and, given only I0 , the prior probability for the event ri = j is, from (9.5), p(ri = j|n I0 ) =

1 . m

(9.59)

This gives us everything we need to apply Bayes’ theorem conditional on G: p(ri = j|Gn I0 ) = p(ri = j|n I0 )

p(G|ri = j, n I0 ) , p(G|n I0 )

(9.60)

or p(ri = j|Gn I0 ) =

M(n − 1, G − g j ) 1 [M(n − 1, G − g j )/m n−1 ] = = fj. m [M(n, G)/m n ] M(n, G)

(9.61)

Knowledge of G therefore changes the robot’s probability for the jth result from the uniform prior probability 1/m to the observed frequency f j of that result. Intuition might have expected this connection between probability and frequency to appear eventually, but it may seem surprising that this requires only that the total G be known. Note, however, that specifying G determines the maximum entropy frequency distribution { f 1 , . . . , f m }, so there is no paradox here.

Exercise 9.3. Extend this result to derive the joint probability p(ri = j, rs = t|Gn I0 ) = M(n − 2, G − g j − gt )/M(n, G)

(9.62)

as a ratio of multiplicities and give the resulting probability. Are the trials still independent, or does knowledge of G induce correlations between different trials?

9 Repetitive experiments: probability and frequency

289

These results show the gratifyingly simple and reasonable things that the poorly informed robot can do. In conventional frequentist probability theory, these connections are only postulated arbitrarily; the poorly informed robot derives them as consequences of the rules of probability theory. Now we return to the problem of carrying out the entropy maximization to obtain explicit expressions for the entropies H and frequencies f j .

9.8 Another way of looking at it The following observation gives us a better intuitive understanding of the partition function method. Unfortunately, it is only a number-theoretic trick, useless in practice. From (9.28) and (9.29) we see that the multiplicity of ways in which the total G can be realized can be written as W (n 1 , . . . , n m ), (9.63) M(n, G) = {n j }

where we are to sum over all sets of non-negative integers {n j } satisfying n j g j = G. (9.64) n j = n, Let {n j } and {n j } be two such different sets which yield the same total: n j g j = n j g j = G. Then it follows that m k j g j = 0, (9.65) j=1

where by hypothesis the integers k j ≡ n j − n j cannot all be zero. Two numbers f, g are said to be incommensurable if their ratio is not a rational number; i.e., if ( f /g) cannot be written as (r/s), where r and s are integers (but, of course, any ratio may be thus approximated arbitrarily close by choosing r , s large enough). Likewise, we shall call the numbers (g1 , . . . , gm ) jointly incommensurable if no one of them can be written as a linear combination of the others with rational coefficients. But if this is so, then (9.65) implies that all k j = 0: n j = n j ,

1 ≤ j ≤ m,

(9.66)

so if the {g1 , . . . , gm } are jointly incommensurable, then in principle the solution is im mediate; for then a given value of G = n j g j can be realized by only one set of sample numbers n j ; i.e., if G is specified exactly, this determines the exact values of all the {n j }. Then we have only one term in (9.63): M(n, G) = W (n 1 , . . . , n m )

(9.67)

M(n − 1, G − g j ) = W (n 1 , . . . , n m ),

(9.68)

and

290

Part 1 Principles and elementary applications

where, necessarily, n i = n i − δi j . Then the exact result (9.61) reduces to p(rk = j|Gn I0 ) =

nj (n − 1)! n j ! W (n 1 , . . . , n m ) = = . W (n 1 , . . . , n m ) n! (n j − 1)! n

(9.69)

In this case the result could have been found in a different way: whenever by any means the robot knows the sample number n j (i.e., the number of digits {r1 , . . . , rn } equal to j) but does not know at which trials the jth result occurred (i.e., which digits are equal to j), it can apply James Bernoulli’s rule (9.18) directly: P(rk = j|n j I0 ) =

nj . (total number of digits)

(9.70)

Again, the probability for any proposition A is equal to the frequency with which it is true in the relevant set of equally possible hypotheses. So again, our robot, even if poorly informed, is nevertheless producing the standard results that current conventional treatments all assure us are correct. Conventional writers appear to regard this as a kind of law of physics; but we need not invoke any ‘law’ to account for the fact that a measured frequency often √ approximates an assigned probability (to a relative accuracy something like 1/ n, where n is the number of trials). If the information used to assign that probability includes all of the systematic effects at work in the real experiment, then the great majority of all things that could happen in the experiment correspond to frequencies remaining in such a shrinking interval; this is simply a combinatorial theorem, which in essence was given already by de Moivre and Laplace in the 18th century, in their asymptotic formula. In virtually all of current probability theory this strong connection between probability and frequency is taken for granted for all probabilities, but without any explanation of the mechanism that produces it; for us, this connection is only a special case.

9.9 Entropy maximization The above derivation (9.50) of M(n, A) is valid for a proposition A that is defined by some arbitrary function of the sample numbers n j . In general, one might need many different algorithms for this maximization. But in the case A = G, where we are concerned with a linear function G = n j g j , the domain R is defined by specifying just the average of G over the n trials: G=

m G = f jgj, n j=1

(9.71)

which is also an average over the frequency distribution. Then the maximization problem has a solution that was given once and for all by J. Willard Gibbs (1902) in his work on statistical mechanics. It required another lifetime for Gibbs’ algorithm to be generally appreciated; for 75 years it was rejected and attacked by some because, for those who thought of probability as a

9 Repetitive experiments: probability and frequency

291

real physical phenomenon, it appeared arbitrary. Only through the work of Claude Shannon (1948) was it possible to understand what the Gibbs’ algorithm was accomplishing. This was pointed out first in Jaynes (1957a) in suggesting a new interpretation of statistical mechanics (as an example of logical inference rather than as a physical theory), and this led rather quickly to a generalization of Gibbs’ equilibrium theory to nonequilibrium statistical mechanics. In Chapter 11 we set down the complete mathematical apparatus generated by the maximum entropy principle; for the present it will be sufficient to give the solution for the case at hand. An inequality given by Gibbs leads to an elegant solution to our maximization problem. Let { f 1 , . . . , f m } be any possible frequency distribution on m points, satisfying ( f j ≥ 0, j f j = 1), and let {u 1 , . . . , u m } be any other frequency distribution satisfying the same conditions. Then using the fact that on the positive real line log(x) ≤ (x − 1) with equality if and only if x = 1, we have

m uj f j log ≤ 0, (9.72) fj j=1 with equality if and only if f j = u j for all j. In this we recognize the entropy expression (9.49), so the Gibbs inequality becomes H ( f1, . . . , fm ) ≤ −

m

f j log(u j ),

(9.73)

j=1

from which various conclusions can be drawn. Making the choice u j = 1/m for all j, it becomes H ≤ log(m),

(9.74)

so the maximum possible value of H is log(m), attained if and only if f j is the uniform distribution f j = 1/m for all j. Now make the choice exp −λg j , (9.75) uj = Z (λ) where the normalizing factor Z (λ) is just the partition function (9.21). Choose the constant λ so that some specified average G = u j g j is attained; we shall see presently how to do this. The Gibbs inequality becomes (9.76) H≤ f j g j + log Z (λ). Now let f j vary over the class of all frequency distributions that yield the wanted average (9.71). The right-hand side of (9.76) remains constant, and H attains its maximum value on R: Hmax = G + log(Z ),

(9.77)

292

Part 1 Principles and elementary applications

if and only if f j = u j . It remains only to choose λ so that the average value G is realized. But it is evident from (9.75) that G=−

∂ , log(Z )∂λ

(9.78)

so this is to be solved for λ. It is easy to see that this has only one real root (on the real axis, the right-hand side of (9.78) is a continuous, strictly decreasing monotonic function of λ), so the solution is unique. We have just derived the ‘Gibbs canonical ensemble’ formalism, which in quantum statistics is able to determine all equilibrium thermodynamic properties of a closed system (that is, no particles enter it or leave it); but now its generality far beyond that application is evident.

9.10 Probability and frequency In our terminology, a probability is something that we assign, in order to represent a state of knowledge, or that we calculate from previously assigned probabilities according to the rules of probability theory. A frequency is a factual property of the real world that we measure or estimate. The phrase ‘estimating a probability’ is just as much a logical incongruity as ‘assigning a frequency’ or ‘drawing a square circle’. The fundamental, inescapable distinction between probability and frequency lies in this relativity principle: probabilities change when we change our state of knowledge; frequencies do not. It follows that the probability p(E) that we assign to an event E can be equal to its frequency f (E) only for certain particular states of knowledge. Intuitively, one would expect this to be the case when the only information we have about E consists of its observed frequency; and the mathematical rules of probability theory confirm this in the following way. We note the two most familiar connections between probability and frequency. Under the assumption of exchangeability and certain other prior information (Jaynes, 1968), the rule for translating an observed frequency in a binary experiment into an assigned probability is Laplace’s rule of succession. We have encountered this already in Chapter 6 in connection with urn sampling, and we analyze it in detail in Chapter 18. Under the assumption of independence, the rule for translating an assigned probability into an estimated frequency is James Bernoulli’s weak law of large numbers (or, to get an error estimate, the de Moivre– Laplace limit theorem). However, many other connections exist. They are contained, for example, in the principle of maximum entropy (Chapter 11), the principle of transformation groups (Chapter 12), and in the theory of fluctuations in exchangeable sequences (Jaynes, 1978). If anyone wished to research this matter, we think he could find a dozen logically distinct connections between probability and frequency that have appeared in various applications. But these connections always appear automatically, whenever they are relevant to the problem, as mathematical consequences of probability theory as logic; there is never any need

9 Repetitive experiments: probability and frequency

293

to define a probability as a frequency. Indeed, Bayesian theory may justifiably claim to use the notion of frequency more effectively than does the ‘frequency’ theory. For the latter admits only one kind of connection between probability and frequency, and has trouble in cases where a different connection is appropriate. R. A. Fisher, J. Neyman, R. von Mises, W. Feller, and L. J. Savage denied vehemently that probability theory is an extension of logic, and accused Laplace and Jeffreys of committing metaphysical nonsense for thinking that it is. It seems to us that, if Mr A wishes to study properties of frequencies in random experiments and publish the results for all to see and teach them to the next generation, he has every right to do so, and we wish him every success. But in turn Mr B has an equal right to study problems of logical inference that have no necessary connection with frequencies or random experiments, and to publish his conclusions and teach them. The world has ample room for both. Then why should there be such unending conflict, unresolved after over a century of bitter debate? Why cannot both coexist in peace? What we have never been able to comprehend is this: If Mr A wants to talk about frequencies, then why can’t he just use the word ‘frequency’? Why does he insist on appropriating the word ‘probability’ and using it in a sense that flies in the face of both historical precedent and the common colloquial meaning of that word? By this practice he guarantees that his meaning will be misunderstood by almost every reader who does not belong to his inner circle clique. It seems to us that he would find it easy – and very much in his own self-interest – to avoid these constant misunderstandings, simply by saying what he means. (H. Cram´er (1946) did this fairly often, although not with 100% reliability, so his work is today easier to read and comprehend.) Of course, von Mises, Feller, Fisher, and Neyman would not be in full agreement among themselves on anything. Nevertheless, whenever any of them uses the word ‘probability’, if we merely substitute the word ‘frequency’ we shall go a long way toward clearing up the confusion by producing a statement that means more nearly what they had in mind. We think it is obvious that the vast majority of the real problems of science fall into Mr B’s category, and therefore, in the future, science will be obliged to turn more and more toward his viewpoint and results. Furthermore, Mr B’s use of the word ‘probability’ as expressing human information enjoys not only the historical precedent going back to James Bernoulli (1713), but it is also closer to the modern colloquial meaning of the word. 9.11 Significance tests The rather subtle interplay between the notions of probability and frequency appears again in the topic of significance tests, or ‘tests of goodness of fit’. In Chapter 5 we discussed such problems as assessing the validity of Newtonian celestial mechanics, and noted that orthodox significance tests purport to accept and reject hypotheses without considering any alternatives. Then we demonstrated why we cannot say how the observed facts affect the status of some hypothesis H until we state the specific alternative(s) against which H is to be tested. Common sense tells all scientists that a given piece of observational

294

Part 1 Principles and elementary applications

evidence E might demolish Newton’s theory, or elevate it to certainty, or anything in between. It depends entirely on this: against which alternative(s) is it being tested? Bayes’ theorem sends us the same message; for example, suppose we wish to consider only two hypotheses, H and H . Then on any data D and prior information I , we must always have P(H |D I ) + P(H |D I ) = 1, and in terms of our logarithmic measure of plausibility in decibels as discussed in Chapter 4, Bayes’ theorem becomes e(H |D I ) = e(H |I ) + 10 log10

P(D|H ) , P(D|H )

(9.79)

which we might describe in words by saying that ‘Data D supports hypothesis H relative to H by 10 log10 [P(D|H )/P(D|H )] decibels’. The phrase ‘relative to H ’ is essential here, because relative to some other alternative H the change in evidence, [e(H |D I ) − e(H |I )], might be entirely different; it does not make sense to ask how much the observed facts tend ‘in themselves’ to support or refute H (except, of course, when data D are impossible on hypothesis H , so deductive reasoning can take over). Now as long as we talk only in these generalities, our common sense readily assents to this need for alternatives. But if we consider specific problems, we may have some doubts. For example, in the particle counter problem of Chapter 6 we had a case (known source strength and counter efficiency s, φ) where the probability for getting c counts in any one second is a Poisson distribution with mean value λ = sφ: p(c|sφ) = exp{−λ}

λc , c!

0 ≤ c ≤ ∞.

(9.80)

Although it wasn’t necessary for the problem we were considering then, we can still ask: What can we infer from this about the relative frequencies with which we would see c counts if we repeat the measurement in many different seconds, with the resulting data set D ≡ {c1 , c2 , . . . , cn }? If the assigned probability for any particular event (say the event c = 12) is independently equal to p = exp{−λ}

λ12 12!

(9.81)

at each trial, then the probability that the event will occur exactly r times in n trials is the binomial distribution (9.38):

n r b(r |n, p) = p (1 − p)n−r . r

(9.82)

9 Repetitive experiments: probability and frequency

295

There are several ways of calculating the moments of this distribution; one, easy to remember, is that the first moment is r = E(r ) n r b(r |n, p) = r =0

d n r (n−r ) p q = p dp r r q=1− p

d = p × ( p + q)n dp = np;

(9.83)

likewise,

d 2 ( p + q)n = np + n(n − 1) p 2 , r = p dp

d 3 r 3 = p ( p + q)n = np + 2n(n − 1) p 2 + n(n − 1)(n − 2) p 3 , dp 2

(9.84)

and so on! For each higher moment we merely apply the operator ( pd/d p) one more time, setting p + q = 1 at the end. Our (mean) ± (standard deviation) estimate, over the sampling distribution, of r is then (r )est = r ± r 2 − r 2 (9.85) = np ± np(1 − p), and our estimate of the frequency f = r/n with which the event c = 12 will occur in n trials, is # p(1 − p) . (9.86) ( f )est = p ± n These relations and their generalizations give the most commonly encountered connection between probability and frequency; it is the original connection given by James Bernoulli (1713). In the ‘long run’, therefore, we expect that the actual frequencies of various counts will be distributed in a manner approximating the Poisson distribution (9.80) to within the tolerances indicated by (9.86). Now we can perform the experiment, and the experimental frequencies either will or will not resemble the predicted values. If, by the time we have observed a few thousand counts, the observed frequencies are wildly different from a Poisson distribution (i.e. far outside the limits (9.86)), our intuition will tell us that the arguments which led to the Poisson prediction must be wrong; either the functional form of (9.80), or the independence at different trials, must not represent the real conditions in which the experiment was done.

296

Part 1 Principles and elementary applications

Yet we have not said anything about any alternatives! Is our intuitive common sense wrong here, or is there some way we can reconcile it with probability theory? The question is not about probability theory but about psychology; it concerns what our intuition is doing here.

9.11.1 Implied alternatives Let’s look again at (9.79). No matter what H is, we must have p(D|H ) ≤ 1, and therefore a statement which is independent of any alternative hypotheses is e(H |D I ) ≥ e(H |I ) + 10 log10 p(D|H ) = e(H |I ) − ψ∞ ,

(9.87)

ψ∞ ≡ −10 log10 p(D|H ) ≥ 0.

(9.88)

where

Thus, there is no possible alternative which data D could support, relative to H, by more than ψ∞ decibels. This suggests the solution to our paradox: in judging the amount of agreement between theory and observation, the proper question to ask is not, ‘How well do data D support hypothesis H ?’ without mentioning any alternatives. A much better question is, ‘Are there any alternatives H which data D would support relative to H , and how much support is possible?’ Probability theory can give no meaningful answer to the first question because it is not well-posed; but it can give a very definite (quantitative and unambiguous) answer to the second. We might be tempted to conclude that the proper criterion of ‘goodness of fit’ is simply ψ∞ ; or what amounts to the same thing, just the probability p(D|H ). This is not so, however, as the following argument shows. As we noted at the end of Chapter 6, after we have obtained D, it is always possible to invent a strange, ‘sure thing’ hypothesis HS according to which every detail of D was inevitable: p(D|HS ) = 1, and HS will always be supported relative to H by exactly ψ∞ decibels. Let us see what this implies. Suppose we toss a die n = 10 000 times and record the detailed results. Then, on the hypothesis H ≡ ‘the die is honest’, each of the 6n possible outcomes has probability 6−n , or ψ∞ = 10 log10 (6n ) = 77 815 db.

(9.89)

No matter what we observe in the 10 000 tosses, there is always an hypothesis HS that will be supported relative to H by this enormous amount. If, after observing 10 000 tosses, we still believe the die is honest, it can be only because we considered the prior probability for HS to be even lower than −77 815 db. Otherwise, we are reasoning inconsistently. This is, if startling, all quite correct. The prior probability for HS was indeed much lower than 6−n , simply because there were 6n different ‘sure thing’ hypotheses which were all on the same footing before we observed the data D. But it is obvious that in practice we

9 Repetitive experiments: probability and frequency

297

don’t want to bother with HS ; even though it is supported by the data more than any other, its prior probability is so low that we know in advance that we are not going to accept it anyway. In practice, we are not interested in comparing H to all conceivable alternatives, but only to all those in some restricted class , consisting of hypotheses which we consider in some sense ‘reasonable’. Let us note one example (by far the most common and useful one) of a test relative to such a restricted class of alternatives. Consider again the above experiment which has m possible results {A1 , . . . , Am } at each trial. Define the quantities xi ≡ k,

if Ak is true at the ith trial;

(9.90)

thus, each xi can take on independently the values 1, 2, . . . , m. Now we wish to take into account only the hypotheses belonging to the ‘Bernoulli class’ Bm in which there are m possible results at each trial and the probabilities of the Ak on successive repetitions of the experiment are considered independent and stationary; thus, when H is in Bm , the probability conditional on H of any specific sequence {x1 , . . . , xn } of observations has the form p(x1 . . . xn |H ) = p1n 1 . . . pmn m ,

(9.91)

where n k is the above sample number. To every hypothesis in Bm there corresponds a set of numbers { p1 . . . pm } such that pk ≥ 0, k pk = 1, and for our present purposes these numbers completely characterize the hypothesis. Conversely, every such set of numbers defines an hypothesis belonging to the Bernoulli class Bm . Now we note an important lemma, given by J. Willard Gibbs (1902). Letting x = n k /npk , and using the fact that on the positive real line log(x) ≥ (1 − x −1 ) with equality if and only if x = 1, we find at once that

m nk n k log ≥ 0, (9.92) npk k=1 with equality if and only if pk = n k /n for all k. This inequality is the same as log p(x1 . . . xn |H ) ≤ n

m

f k log( f k ),

(9.93)

k=1

where f k = n k /n is the observed frequency of result Ak . The right-hand side of (9.88) depends only on the observed sample D, so if we consider various hypotheses {H1 , H2 , . . .} in Bm , the quantity (9.88) gives us a measure of how well the different hypotheses fit the data; the nearer to equality, the better the fit. For convenience in numerical work, we express (9.88) in decibel units as in Chapter 4:

m nk n k log10 . (9.94) ψ B ≡ 10 npk k=1

298

Part 1 Principles and elementary applications

To see the meaning of ψ B , suppose we apply Bayes’ theorem in the form of (9.79). Only two hypotheses, H = { p1 , . . . , pm } and H = { p1 , . . . , pm } are being considered. Let the values of ψ B according to H and H be ψ B , ψ B , respectively. Then Bayes’ theorem reads p(x1 . . . xn |H ) e(H |x1 . . . xn ) = e(H |I ) + 10 log10 p(x1 . . . xn |H ) (9.95) = e(H |I ) + ψ B − ψ B . Now we can always find an hypothesis H in Bm for which pk = n k /n, and so ψ B = 0; therefore ψ B has the following meaning: Given an hypothesis H and the observed data D ≡ {x1 , . . . , xn }, compute ψ B from (9.94). Then, given any ψ in the range 0 ≤ ψ ≤ ψ B , it is possible to find an alternative hypothesis H in Bm such that the data support H relative to H by ψ decibels. There is no H in Bm which is supported relative to H by more than ψ B decibels.

Thus, although ψ B makes no reference to any specific alternative, it is nevertheless exactly the appropriate measure of ‘goodness of fit’ relative to the class Bm of Bernoulli alternatives. It searches out Bm and locates the best alternative in that class. Now we can understand the seeming paradox with which our discussion of significance tests started; the ψ-test is just the quantitative version of what our intuition has been, unconsciously, doing. We have already noted in Chapter 5, Section 5.4, that natural selection in exactly the sense of Darwin would tend to evolve creatures that reason in a Bayesian way because of its survival value. We can also interpret ψ B in this manner: we may regard the observed results {x1 , . . . , xn } as a ‘message’ consisting of n symbols chosen from an alphabet of m letters. On each repetition of the experiment, Nature transmits to us one more letter of the message. How much information is transmitted by this message under the Bernoulli probability assignment? Note that ψ B = 10n

m

f k log10 ( f k / pk )

(9.96)

k=1

with f k = n k /n. Thus, (−ψ B /n) is the entropy per symbol H ( f ; p) of the observed message distribution { f 1 , . . . , f m } relative to the ‘expected distribution’ { p1 , . . . , pm }. This shows that the notion of entropy was always inherent in probability theory; independently of Shannon’s theorems, entropy or some monotonic function of entropy appears automatically in the equations of anyone who is willing to use Bayes’ theorem for hypothesis testing. Historically, a different criterion was introduced by Karl Pearson early in the 20th century. We expect that, if hypothesis H is true, then n k will be close to npk , in the sense that the √ difference |n k − npk | will grow with n only as n. Call this ‘condition A’. Then using the expansion log(x) = (x − 1) − (x − 1)2 /2 + · · ·, we find that

m nk 1 1 (n k − npk )2 , (9.97) n k log +O √ = npk 2 k npk n k=1

9 Repetitive experiments: probability and frequency

299

√ the quantity designated as O(1/ n) tending to zero as indicated provided that the observed sample does in fact satisfy condition A. The quantity χ2 ≡

m ( f k − p k )2 (n k − npk )2 =n npk pk k k=1

(9.98)

is thus very nearly proportional to ψ B if the sample frequencies are close to the expected values:

1 1 1 = 4.343χ 2 + O √ . (9.99) ψ B = [10 log10 (e)] × χ 2 + O √ 2 n n Pearson suggested that χ 2 be used as a criterion of ‘goodness of fit’, and this has led to the ‘chi-squared test’, one of the most used techniques of orthodox statistics. Before describing the test, we examine its theoretical basis and suitability as a criterion. Evidently, χ 2 ≥ 0, with equality if and only if the observed frequencies agree exactly with those expected if the hypothesis is true. So, larger values of χ 2 correspond to greater deviation between prediction and observation, and too large a value of χ 2 should lead us to doubt the truth of the hypothesis. But these qualitative properties are possessed also by ψ B and by any number of other quantities we could define. We have seen how probability theory determines directly the theoretical basis, and precise quantitative meaning, of ψ B ; so we ask whether there exists any connected theoretical argument pointing to χ 2 as the optimal measure of goodness of fit, by some well-defined criterion. The results of a search for this connected argument are disappointing. Scanning a number of orthodox textbooks, we find that χ 2 is usually introduced as a straight deus ex machina; but Cram´er (1946) does attempt to prepare the way for the idea, in these words: It will then be in conformity with the general principle of least squares to adopt as measure of deviation an expression of the form ci (n i /n − pi )2 where the coefficients ci may be chosen more or less arbitrarily. It was shown by K. Pearson that if we take ci = n/ pi , we shall obtain a deviation measure with particularly simple properties.

In other words, χ 2 is adopted, not because it is demonstrated to have good performance by any criterion, but only because it has simple properties! We have seen that in some cases χ 2 is nearly a multiple of ψ B , and then they must, of course, lead to essentially the same conclusions. But let us try to understand the quantitative difference in these criteria by a technique introduced in Jaynes (1976), which we borrowed from Galileo. Galileo’s telescope was able to reveal the moons of Jupiter because it could magnify what was too small to be perceived by the unaided eye, up to the point where it could be seen by everybody. Likewise, we often find a quantitative difference in the Bayesian and orthodox results, so small that our common sense is unable to pass judgment on which result is preferable. But when this happens, we can find some extreme case where the difference is magnified to the point where common sense can tell us which method is giving sensible results, and which is not.

300

Part 1 Principles and elementary applications

As an example of this magnification technique, we compare ψ B and χ 2 to see which is the more reasonable criterion of goodness of fit.

9.12 Comparison of psi and chi-squared A coin toss can give three different results: (1) heads, (2) tails, (3) it may stand on edge if it is sufficiently thick. Suppose that Mr A’s knowledge of the thick English pound coin is such that he assigns probabilities p1 = p2 = 0.499, p3 = 0.002 to these cases. We are in communication with Mr B on the planet Mars, who has never seen a coin and doesn’t have the slightest idea what a coin is. So, when told that there are three possible results at each trial, and nothing more, he can only assign equal probabilities, p1 = p2 = p3 = 1/3. Now we want to test Mr A’s hypothesis against Mr B’s by doing a ‘random’ experiment. We toss the coin 29 times and observe the results (n 1 = n 2 = 14, n 3 = 1). Then if we use the ψ criterion, we would have for the two hypotheses

14 1 + log10 ψ A = 10 28 log10 29 × 0.499 29 × 0.002 = 8.34 db,

(9.100) 14 × 3 3 + log10 ψ B = 10 28 log10 29 29 = 35.19 db. From this experiment, Mr B learns two things: (a) that there is another hypothesis about the coin that is 35.2 db better than his (this corresponds to odds of over 3 300:1), and so, unless he can justify an extremely low prior probability for that alternative, he cannot reasonably adhere to his first hypothesis; and (b) that Mr A’s hypothesis is better than his by some 26.8 db, and in fact is within about 8 db of the best hypothesis in the Bernoulli class B3 . Here the ψ test tells us pretty much what our common sense does. Suppose that the man on Mars knew only about orthodox statistical principles as usually taught; and therefore believed that χ 2 was the proper criterion of goodness of fit. He would find that (1 − 29 × 0.002)2 (14 − 29 × 0.499)2 + 29 × 0.499 29 × 0.002 = 15.33,

χ A2 = 2

(1 − 29 × 0.333)2 (14 − 29 × 0.333)2 + 29 × 0.333 29 × 0.333 = 11.66,

(9.101)

χ B2 = 2

and he would report back delightedly: ‘My hypothesis, by the accepted statistical test, is shown to be slightly preferable to yours!’ Many persons trained to use χ 2 will find this comparison startling, and will try immediately to find the error in our numerical work above. We have here still another fulfilment of

9 Repetitive experiments: probability and frequency

301

what Cox’s theorems predict. The ψ criterion is exactly derivable from the rules of probability theory; therefore any criterion which is only an approximation to it must contain either an inconsistency or a qualitative violation of common sense, which can be exhibited by producing special cases. We can learn an important lesson about the practical use of χ 2 by looking more closely at what is happening here. On hypothesis A, the ‘expected’ number of heads or tails in 29 tosses was np1 = 14.471. The actual observed number must be an integer, and we supposed that in each case it was the closest possible integer, namely 14. Yet this small discrepancy between expected and observed sample numbers, in a sense the smallest it could possibly be, nevertheless had an enormous effect on χ 2 . The spook lies in the fact that χ A2 turned out so much larger than seems reasonable; there is nothing surprising about the other numerical values. Evidently, it is the last term in χ A2 , which refers to the fact the coin stood on edge once in 29 tosses, that is causing the trouble. On hypothesis A, the probability that this would happen exactly r times in n tosses is our binomial distribution (9.57), and with n = 29, p = 0.002, we find that the probability for seeing the coin on edge one or more times in 29 trials is 1 − b(0|n, p) = 1 − 0.99829 = 1/17.73; i.e. the fact that we saw it even once is a bit unexpected, and constitutes some evidence against A. But this amount of evidence is certainly not overwhelming; if our travel guide tells us that London has fog, on the average, one day in 18, we are hardly astonished to see fog on the day we arrive. Yet this contributes an amount 15.30, almost all of the value of χ A2 = 15.33. It is the (1/ pi ) weighting factor in the summand of χ 2 that causes this anomaly. Because of it, the χ 2 criterion essentially concentrates its attention on the extremely unlikely possibilities if the hypothesis contains them; and the slightest discrepancy between expected and observed sample number for the unlikely events grotesquely over-penalizes the hypothesis. The ψ-test also contains this effect, but in a much milder form, the 1/ pi term appearing only in the logarithm. To see this effect more clearly, suppose now that the experiment had yielded instead the results n 1 = 14, n 2 = 15, n 3 = 0. Evidently, by either the χ 2 or ψ criterion, this ought to make hypothesis A look better, B worse, than in the first example. Repeating the calculations, we now find ψ A = 0.30 db

χ A2 = 0.0925

ψ B = 51.2 db

χ B2 = 14.55.

(9.102)

You see that by far the greatest relative change was in χ A2 ; both criteria now agree that hypothesis A is far superior to B, as far as this experiment indicates. This shows what can happen through uncritical use of χ 2 . Professor Q believes in extrasensory perception, and undertakes to prove it to us poor benighted, intransigent doubters. So he plays card games. As in Chapter 5, on the ‘null hypothesis’ that only chance is operating, it is extremely unlikely that the subject will guess many cards correctly. But Professor Q is determined to avoid the tactical errors of his predecessors, and is alert to the phenomenon of deception hypotheses discussed in Chapter 5; so he averts that possibility by making

302

Part 1 Principles and elementary applications

videotape recordings of every detail of the experiments. The first few hundred times he plays, the results are disappointing; but these are readily explained away on the grounds that the subject is not in a ‘receptive’ mood. Of course, the tapes recording these experiments are erased. One day, providence smiles on Professor Q; the subject comes through handsomely and he has the incontrovertible record of it. Immediately he calls in the statisticians, the mathematicians, the notary publics, and the newspaper reporters. An extremely improbable event has at last occurred; and χ 2 is enormous. Now he can publish the results and assert: ‘The validity of the data is certified by reputable, disinterested persons, the statistical analysis has been under the supervision of recognized statisticians, the calculations have been checked by competent mathematicians. By the accepted statistical test, the null hypothesis has been decisively rejected.’ And everything he has said is absolutely true! Moral For testing hypotheses involving moderately large probabilities, which agree moderately well with observation, it will not make much difference whether we use ψ or χ 2 . But for testing hypotheses involving extremely unlikely events, we had better use ψ; or life might become too exciting for us.

9.13 The chi-squared test Now we examine briefly the chi-squared test as done in practice. We have the so-called ‘null hypothesis’ H to be tested, and no alternative is stated. The null hypothesis predicts certain relative frequencies { f 1 , . . . , f m } and corresponding sample numbers n k = n f k , where n is the number of trials. We observe the actual sample numbers {n 1 , . . . , n m }. But if the n k are very small, we group categories together, so that each n k is at least, say, five. For example, in a case with m = 6, if the observed sample numbers were {6, 11, 14, 7, 3, 2} we would group the last two categories together, making it a problem with m = 5 distinguishable results per trial, with sample numbers {6, 11, 14, 7, 5}, and null hypothesis H which assigns probabilities { p1 , p2 , p3 , p4 , p5 + p6 }. We then calculate the observed value of χ 2 : 2 = χobs

m (n k − npk )2 npk k=1

(9.103)

as our measure of deviation of observation from prediction. Evidently, it is very unlikely that 2 = 0 even if the null hypothesis is true. So, goes the orthodox reasoning, we would find χobs we should calculate the probability that χ 2 would have various values, and reject H if the 2 2 probability P(χobs ) of finding a deviation as great as or greater than χobs is sufficiently 2 ) = 0.05) as small; this is the ‘tail area’ criterion, and one usually takes 5% (that is, P(χobs the threshold of rejection. Now the n k are integers, so χ 2 is capable of taking on only a discrete set of numerical values, at most (n + m − 1)!/n!(m − 1)! different values if the pk are all different and

9 Repetitive experiments: probability and frequency

303

incommensurable. Therefore, the exact χ 2 distribution is necessarily discrete and defined at only a finite number of points. However, for sufficiently large n, the number and density of points becomes so large that we may approximate the true χ 2 distribution by a continuous one. The ‘simple property’ referred to by Cram´er is then the fact, at first glance surprising, that, in the limit of large n, we obtain a universal distribution law: the sampling probability that χ 2 will lie in the interval d(χ 2 ) is 1 χ f −2 exp − χ 2 d(χ 2 ), (9.104) g(χ 2 )d(χ 2 ) = f /2 2 ( f /2 − 1)! 2 where f is called the ‘number of degrees of freedom’ of the distribution. If the null hypothesis H is completely specified (i.e., if it contains no variable parameters), then f = m − 1, where m is the number of categories used in the sum of (9.98). But if H contains unspecified parameters which must be estimated from the data, we take f = m − 1 − r , where r is the number of parameters estimated.5 We readily calculate the expectation and variance over this distribution: χ 2 = f , var(χ 2 ) = 2 f , so the (mean) ± (standard deviation) estimate of the χ 2 that we expect to see is just 2 (9.105) χ est = f ± 2 f . The reason usually given for grouping categories for which the sample numbers are small, is that the approximation (9.104) would otherwise be bad. But grouping inevitably throws away some of the relevant information in the data, and there is never any reason to do this when using the exact ψ. 2 is then The probability that we would see a deviation as great as or greater than χobs ∞ ∞ qk 2 exp{−q}, (9.106) )= d(χ 2 ) g(χ 2 ) = dq P(χobs 2 k! χobs qobs 2 ) < 0.05, we reject the null hypothesis at the where q ≡ (1/2)χ 2 , k ≡ ( f − 2)/2. If P(χobs 5% ‘significance level’. Tables of χ 2 for which P = 0.01, 0.05, 0.10, 0.50, for various numbers of degrees of freedom, are given in most orthodox textbooks and collections of statistical tables (for example, Crow, Davis, and Maxfield, 1960). Note the traditional procedure here; we chose some basically arbitrary significance level, then reported only whether the null hypothesis was or was not rejected at that level. Evidently this doesn’t tell us very much about the real import of the data; if you tell me that the hypothesis was rejected at the 5% level, then I can’t tell from that whether it would have been rejected at the 1%, or 2%, level. If you tell me that it was not rejected at the 5% level, then I don’t know whether it would have been rejected at the 10%, or 20%, level. The orthodox statistician would tell us far more about what the data really indicate if he would report instead the significance level P(χ 2 ) at which the null hypothesis is just barely rejected; for then we know what the verdict would be at all levels. This is the practice of reporting 5

The need for this correction was perceived by the young R. A. Fisher but not comprehended by Karl Pearson; and this set off the first of their fierce controversies, described in Chapter 16.

304

Part 1 Principles and elementary applications

so-called ‘P-values’, a major improvement over the original custom. Unfortunately, the orthodox χ 2 and other tables are still so constructed that you cannot use them to report the conclusions in this more informative way, because they give numerical values only at such widely separated values of the significance level that interpolation is not possible. How does one find numerical P-values without using the chi-squared tables? Writing q = q0 + t, (9.106) becomes ∞ (q0 + t)k exp{−(q0 + t)} dt P= k! 0

m ∞ m 1 dt q0k t m−k exp{−(q0 + t)} = (9.107) k! k=0 k 0 m qk exp{−q0 } 0 . = k! k=0 But this is just the cumulative Poisson distribution and easily computed. If you use the ψ-test instead, however, you don’t need any tables. The evidential meaning of the sample is then described simply by the numerical value of ψ, and not by a further arbitrary construct such as tail areas. Of course, the numerical value of ψ doesn’t in itself tell you whether to reject the hypothesis (although we could, with just as much justification as in the chi-squared test, prescribe some definite ‘level’ at which to reject). From the Bayesian point of view, there is simply no use in rejecting any hypothesis unless we can replace it with a definite alternative known to be better; and, obviously, whether this is justified must depend not only on ψ, but also on the prior probability for the alternative and on the consequences of making wrong decisions. Common sense tells us that this is, necessarily, a problem not just of inference, but of decision theory. In spite of the vast difference in viewpoints, there is not necessarily much difference in the actual conclusions reached. For example, as the number of degrees of freedom f increases, the orthodox statistician will accept a higher value of χ 2 (roughly proportional to f , as (9.105) indicates) on the grounds that such a high value is quite likely to occur if the hypothesis is true; but the Bayesian, who will reject it only in favor of a definite alternative, must also accept a proportionally higher value of ψ, because the number of reasonable alternatives is increasing exponentially with f , and the prior probability for any one of them is correspondingly decreasing. So, in either case we end up rejecting the hypothesis if ψ or χ 2 exceeds some critical limit, with an enormous difference in the philosophy of how we choose that limit, but not necessarily a big difference in its actual location. For many more details about chi-squared, see Lancaster (1969); and for some curious views that Bayesian methods fail to give proper significance tests, see Box and Tiao (1973).

9.14 Generalization Although the point is not made in the orthodox literature, which does not mention alternatives at all, we see from the preceding section that χ 2 is not a measure of goodness of fit relative

9 Repetitive experiments: probability and frequency

305

to all conceivable alternatives, but only relative to those in the same Bernoulli class. Until this is recognized, one really does not know what the χ 2 -test is testing. The procedure by which we constructed the ψ-test generalizes at once to the rule for constructing the exact test which compares the null hypothesis to any well-defined class C of alternatives. Just write Bayes’ theorem describing the effect of data D on the relative plausibility of two hypotheses H1 , H2 in that class, in the form e(H1 |D I ) − e(H2 |D I ) = ψ2 − ψ1 ,

(9.108)

where ψi depends only on the data and Hi is non-negative over C, and vanishes for some Hi in C. Then we can always find an H2 in C for which ψ2 = 0, and so we have constructed the appropriate ψ1 which measures goodness of fit relative to the class of alternatives C, and has the same meaning as that defined after (9.95). ψ1 is the maximum amount by which any hypothesis in C can be supported relative to H1 by the data D. Thus, if we want a Bayesian test that is exact but operates in a similar way to orthodox significance tests, it can be produced quite easily. But we shall see in Chapter 17 that a different viewpoint has advantages; the format of orthodox significance tests can be replaced, as was done already by Laplace, by a parameter estimation procedure, which yields even more useful information. Anscombe (1963) held it to be a weakness of the Bayesian method that we had to introduce a specific class of alternatives. We have answered that sufficiently here and in Chapters 4 and 5. We would hold it to be a great merit of the Bayesian approach that it forces us to recognize these essential features of inference, which have not been apparent to all orthodox statisticians. Our discussion of significance tests is a good example of what, we suggest, is the general situation; if an orthodox method is usable in some problem, then the Bayesian approach to inference supplies the missing theoretical basis for it, and usually improvements on it. Any significance test is only a slight variant of our multiple hypothesis testing procedures given in Chapter 4. 9.15 Halley’s mortality table An early example of the use of observed frequencies as probabilities, in a more useful and dignified context than gambling, and by a procedure that is so nearly correct that we could not improve on it appreciably today, was provided by the astronomer Edmund Halley (1656–1742) of ‘Halley’s Comet’ fame. Interested in many things besides astronomy, he also prepared in 1693 the first modern mortality table. Let us dwell a moment on the details of this work because of its great historical interest. The subject does not quite start with Halley, however. In England, due presumably to increasing population densities, various plagues were rampant from the 16th century up to the adoption of public sanitation policies and facilities in the mid-19th century. In London, starting intermittently in 1591, and continuously from 1604 for several decades, there were published weekly Bills of Mortality, which listed for each parish the number of births and deaths of males and females and the statistics compiled by the Searchers, a body of ‘ancient

306

Part 1 Principles and elementary applications

Matrons’ who carried out the unpleasant task of examining corpses, and, from the physical evidence and any other information they were able to elicit by inquiry, judged as best as they could the cause of each death. In 1662, John Graunt (1620–74) called attention to the fact that these Bills, in their totality, contained valuable demographic information that could be useful to governments and scholars for many other purposes besides judging the current state of public health (Graunt, 1662).6 He aggregated the data for 1632 into a single more useful table and made the observation that, in sufficiently large pools of data on births, there are always slightly more boys than girls, which circumstance provoked many speculations and calculations by probabilists for the next 150 years. Graunt was not a scholar, but a self-educated shopkeeper. Nevertheless, his short work contained so much valuable good sense that it came to the attention of Charles II, who as a reward ordered the Royal Society (which he had founded shortly before) to admit Graunt as a Fellow.7 Edmund Halley was highly educated, mathematically competent (later succeeding Wallis (in 1703) as Savilian Professor of Mathematics at Oxford University and Flamsteed (in 1720) as Astronomer Royal and Director of the Greenwich Observatory), a personal friend of Isaac Newton and the one who had persuaded him to publish his Principia by dropping his own work to see it through publication and paying for it out of his own modest fortune. He was eminently in a position to do more with demographic data than was John Graunt. In undertaking to determine the actual distribution of age in the population, Halley had extensive data on births and deaths from London and Dublin. But records of the age at death were often missing, and he perceived that London and Dublin were growing rapidly by in-migration, biasing the data with people dying there who were not born there. Those data were so contaminated with trend that he had no means of extracting the information he needed. So he found instead five years’ data (1687–91) for a city with a stable population: Breslau in Silesia (today called Wroclaw, in what is now Poland). Silesians, more meticulous in record keeping and less inclined to migrate, generated better data for his purpose. Of course, contemporary standards of nutrition, sanitation, and medical care in Breslau might differ from those in England. But in any event Halley produced a mortality table surely valid for Breslau and presumably not badly in error for England. We have converted it into a graph, with three emendations described below, and present it in Figure 9.1. In the 17th century, even so learned a man as Halley did not have the habits of full, clear expression that we expect in scholarly works today. In reading his work we are exasperated 6

7

It appears that this story may be repeated some 330 years later, in the recent realization that the records of credit card companies contain a wealth of economic data which have been sitting there unused for many years. For the largest such company (Citicorp), a record of 1% of the nation’s retail sales comes into its computers every day. For predicting some economic trends and activity, this is far more detailed, reliable, and timely than the monthly government releases. Contrast this enlightened attitude and behavior with that of Oliver Cromwell shortly before, who, through his henchmen, did more wanton, malicious damage to Cambridge University than any other person in history. The writer lived for a year in the Second Court of St John’s College, Cambridge, which Cromwell appropriated and put to use, not for scholarly pursuits, but as the stockade for holding his prisoners. Whatever one may think of the private escapades of Charles II, one must ask also: against what alternative do we judge him? Had the humorless fanatic Cromwell prevailed, there would have been no Royal Society, and no recognition for scholarly accomplishment in England; quite likely, the magnificent achievements of British science in the 19th century would not have happened. It is even problematical whether Cambridge and Oxford Universities would still exist today.

9 Repetitive experiments: probability and frequency

307

Table 9.1. Halley’s first table. Age

d(y)/5

Age

d(y)/5

..0 . 7 8 ..9 . 14 .. . 18 .. . 21 .. . 27

348 198 11 11 6 5.5 2 3.5 5 6 4.5 6.5 9

28 .. . 35 36 .. . 42 .. . 45 .. . 49 54 55 56

8 7 7 8 9.5 8 9 7 7 10 11 9 9

Age .. . 63 .. . 70 71 72 .. . 77 .. . 81 .. . 84 .. .

d(y)/5

Age

d(y)/5

10 12 9.5 14 9 11 9.5 6 7 3 4 2 1

90 91 98 99 100

1 1 0 0.5 3/5

1000 800 600 400 200 0 0

10

20

30

40

50

60

70

80 Years

Fig. 9.1. n(y): estimated number of persons in the age range (y, y + 1) years.

at the ambiguities and omissions, which make it impossible to ascertain some important details about his data and procedure. We know that his data consisted of monthly records of the number of births and deaths and the age of each person at death. Unfortunately, he does not show us the original, unprocessed data, which would today be of far greater value to us than anything in his work, because, with modern probability theory and computers, we could easily process the data for ourselves, and extract much more information from them than Halley did. Halley presents two tables derived from the data, giving respectively the estimated number d(x) of annual deaths (total number/5) at each age of x years, Table 9.1 (but which inexplicably contains some entries that are not multiples of 1/5), and the estimated distribution n(x) of population by age, Table 9.2. Thus, the first table is, crudely, something like

308

Part 1 Principles and elementary applications

Table 9.2. Halley’s second table. Age n(y) 1 2 3 4 5 6 7 8 9 10 11 12

1000 855 798 760 732 710 692 680 670 661 653 646

Age n(y) 13 14 15 16 17 18 19 20 21 22 23 24

640 634 628 622 616 610 604 598 592 586 579 573

Age n(y) 25 26 27 28 29 30 31 32 33 34 35 36

567 560 553 546 539 531 523 515 507 499 490 481

Age n(y) 37 38 39 40 41 42 43 44 45 46 47 48

472 463 454 445 436 427 417 407 397 387 377 367

Age n(y) 49 50 51 52 53 54 55 56 57 58 59 60

357 346 335 324 313 302 292 282 272 262 252 242

Age n(y) 61 62 63 64 65 66 67 68 69 70 71 72

232 222 212 202 192 182 172 162 152 142 131 120

Age n(y) 73 74 75 76 77 78 79 80 81 82 83 84

109 98 88 78 68 58 49 41 34 28 23 20

the negative derivative of the second. But, inexplicably, he omits the very young (< 7 yr) from the first table, and the very old (> 84 yr) from the second, thus withholding what are in many ways the most interesting parts, the regions of strong curvature of the graph. Even so, if we knew the exact procedure by which Halley constructed the tables from the raw data, we might be able to reconstruct both tables in their entirety. But he gives absolutely no information about this, saying only, From these Considerations I have formed the adjoyned Table, whose Uses are manifold, and give a more just Idea of the State and Condition of Mankind, than any thing yet extant that I know of.

But he fails to inform us what ‘these Considerations’ are, so we are reduced to conjecturing what he actually did. Although we were unable to find any conjecture which is consistent with all the numerical values in Halley’s tables, we can clarify things to some extent. Firstly, the actual number of deaths at each age in the first table naturally shows considerable ‘statistical fluctuations’ from one age to the next. Halley must have done some kind of smoothing of this, because the fluctuations do not show in the second table. From other evidence in his article, we infer that he reasoned as follows. If the population distribution is stable (exactly the same next year as this year), then the difference n(25) − n(26) between the number now alive at ages 25 and 26 must be equal to the number d(25) now at age 25 who will die in the next year. Thus we would expect that the second table might be constructed by starting with the estimated number (1238) born each year as n(0), and by recursion taking n(x) = n(x − 1) − d(x), where d(x) is the smoothed estimate of d. Finally, the total population of Breslau is estimated as x n(x) = 34 000. But, although the later parts of Table 9.2 are well accounted for by this surmise, the early parts (0 < x < 7) do not fit it, and we have been unable to form even a conjecture about how he determined the first six entries of Table 9.2.

9 Repetitive experiments: probability and frequency

309

We have shifted the ages downward by one year in our graph because it appears that the common meanings of terms have changed in 300 years. Today, when we say colloquially that a boy is ‘eight years old’, we mean that his exact age x is in the range (8 ≤ x < 9); i.e., he is actually in his ninth year of life. But we can make sense out of Halley’s numbers only if we assume that for him the phrase ‘eight years current’ meant in the eighth year of life; 7 < x ≤ 8. These points were noted also by Greenwood (1942), whose analysis confirms our conclusion about the meaning of ‘age current’. However, our attempt to follow his reasoning beyond that point leaves us more confused than before. At this point we must give up, and simply accept Halley’s judgment, whatever it was. In Figure 9.1 we give Halley’s second table as a graph of a shifted function n(y). Thus, where Halley’s table reads (25 567) we give it as n(24) = 567, which we interpret to mean an estimated 567 persons in the age range (24 ≤ x < 25). Thus, our n(y) is what we believe to be Halley’s estimated number of persons in the age range (y, y + 1) years. Thirdly, Halley’s second table stops at the entry (84 20); yet the first table has data beyond that age, which he used in estimating the total population of Breslau. His first table indicates what we interpret as 19 deaths in the range (85, 100) in the five years, including three at ‘age current’ 100. He estimated the total population in that age range as 107. We have converted this meager information, plus other comparisons of the two tables, into a smoothed extrapolation of Halley’s second table (our entries n(84), . . . , n(99)), which shows the necessary sharp curvature in the tail. What strikes us first about this graph is the appalling infant mortality rate. Halley states elsewhere that only 56% of those born survived to the age of six (although this does not agree with his Table 9.2) and that 50% survive to age 17 (which does agree with the table). The second striking feature is the almost perfect linearity in the age range 35–80. Halley notes various uses that can be made of his second table, including estimating the size of the army that the city could raise, and the values of annuities. Let us consider only one, the estimation of future life expectancy. We would think it reasonable to assign a probability that a person of age y will live to age z, as p = n(z)/n(y), to sufficient accuracy. Actually, Halley does not use the word ‘probability’ but instead refers to ‘odds’ in exactly the same way that we use it today: ‘. . . if the number of Persons of any Age remaining after one year, be divided by the difference between that and the number of the Age proposed, it shews the odds that there is, that a Person of that Age does not die in a Year.’ Thus, Halley’s odds on a person living m more years, given a present age of y years, is O(m|y) = n(y + m)/[n(y) − n(y + m)] = p/(1 − p), in agreement with our calculation. Another exasperating feature is that Halley pooled the data for males and females, and thus failed to exhibit their different mortality functions; lacking his raw data, we are unable to rectify this. Let the things which exasperate us in Halley’s work be a lesson for us today. The First Commandment of scientific data analysis publication ought to be: ‘Thou shalt reveal thy full original data, unmutilated by any processing whatsoever.’ Just as today we could do far more with Halley’s raw data than he did, future readers may be able to do more with our raw data than we can, if only we will refrain from mutilating it according to our

310

Part 1 Principles and elementary applications

present purposes and prejudices. At the very least, they will approach our data with a different state of prior knowledge than ours, and we have seen how much this can affect the conclusions.

Exercise 9.3. Suppose you had the same raw data as Halley. How would you process them today, taking full advantage of probability theory? How different would the actual conclusions be?

9.16 Comments 9.16.1 The irrationalists Philosophers have argued over the nature of induction for centuries. Some, from David Hume (1711–76) in the mid-18th century to Karl Popper in the mid-20th (for example, Popper and Miller, 1983), have tried to deny the possibility of induction, although all scientific knowledge has been obtained by induction. D. Stove (1982) calls them and their colleagues ‘the irrationalists’ and tries to understand (1) how could such an absurd view ever have arisen?; and (2) by what linguistic practices do the irrationalists succeed in gaining an audience? However, we are not bothered by this situation because we are not convinced that much of an audience exists. In denying the possibility of induction, Popper holds that theories can never attain a high probability. But this presupposes that the theory is being tested against an infinite number of alternatives. We would observe that the number of atoms in the known universe is finite; so also, therefore, is the amount of paper and ink available to write alternative theories. It is not the absolute status of an hypothesis embedded in the universe of all conceivable theories, but the plausibility of an hypothesis relative to a definite set of specified alternatives, that Bayesian inference determines. As we showed in connection with multiple hypothesis testing in Chapter 4, Newton’s theory in Chapter 5, and the above discussion of significance tests, an hypothesis can attain a very high or very low probability within a class of well-defined alternatives. Its probability within the class of all conceivable theories is neither large nor small; it is simply undefined because the class of all conceivable theories is undefined. In other words, Bayesian inference deals with determinate problems – not the undefined ones of Popper – and we would not have it otherwise. The objection to induction is often stated in different terms. If a theory cannot attain a high absolute probability against all alternatives, then there is no way to prove that induction from it will be right. But that quite misses the point; it is not the function of induction to be ‘right’, and working scientists do not use it for that purpose (and could not if we wanted to). The functional use of induction in science is not to tell us what predictions must be true, but rather what predictions are most strongly indicated by our present hypotheses and our present information?

9 Repetitive experiments: probability and frequency

311

Put more carefully: What predictions are most strongly indicated by the information that we have put into the calculation? It is quite legitimate to do induction based on hypotheses that we do not believe, or even that we know to be false, to learn what their predictable consequences would be. Indeed, an experimenter seeking evidence for his favorite theory does not know what to look for unless he knows what predictions are made by some alternative theory. He must give temporary lip-service to the alternative in order to find out what it predicts, although he does not really believe it. If predictions made by a theory are borne out by future observation, then we become more confident of the hypotheses that led to them; and if the predictions never fail in vast numbers of tests, we come eventually to call those hypotheses ‘physical laws’. Successful induction is, of course, of great practical value in planning strategies for the future. But from successful induction we do not learn anything basically new; we only become more confident of what we knew already. On the other hand, if the predictions prove to be wrong, then induction has served its real purpose; we have learned that our hypotheses are wrong or incomplete, and from the nature of the error we have a clue as to how they might be improved. So those who criticize induction on the grounds that it might not be right, could not possibly be more mistaken. As Harold Jeffreys explained long ago, induction is most valuable to a scientist just when it turns out to be wrong; only then do we get new fundamental knowledge. Some striking case histories of induction in use are found in biology, where causal relations are often so complex and subtle that it is remarkable that it was possible to uncover them at all. For example, it became clear in the 20th century that new influenza pandemics were coming out of China; the worst ones acquired names like the Asian Flu (in 1957), the Hong Kong Flu (in 1968), and Beijing A (in 1993). It appears that the cause has been traced to the fact that Chinese farmers raise ducks and pigs side by side. Humans are not infected directly by viruses in ducks, even by handling them and eating them; but pigs can absorb duck viruses, transfer some of their genes to other viruses, and in this form pass them on to humans, where they take on a life of their own because they appear as something entirely new, for which the human immune system is unprepared. An equally remarkable causal chain is in the role of the gooseberry as a host transmuting and transmitting the white pine blister rust disease. Many other examples of unraveling subtle cause–effect chains are found in the classic work of Louis Pasteur, and of modern medical researchers who continue to succeed in locating the specific genes responsible for various disorders. We stress that all of these triumphant examples of highly important detective work were accomplished by qualitative plausible reasoning using the format defined by P´olya (1954). Modern Bayesian analysis is just the unique quantitative expression of this reasoning format, the inductive reasoning that Hume and Popper held to be impossible. It is true that this reasoning format does not guarantee that the conclusion must be correct; but then direct tests can confirm it or refute it. Without the preparatory inductive reasoning phase, one would not know which direct tests to try.

312

Part 1 Principles and elementary applications

9.16.2 Superstitions Another curious circumstance is that, although induction has proved a tricky thing to understand and justify logically, the human mind has a predilection for rampant, uncontrolled induction, and it requires much education to overcome this. As we noted briefly in Chapter 5, the reasoning of those without training in any mental discipline – who are therefore unfamiliar with either deductive logic or probability theory – is mostly unjustified induction. In spite of modern science, general human comprehension of the world has progressed very little beyond the level of ancient superstitions. As we observe constantly in news commentaries and documentaries, the untrained mind never hesitates to interpret every observed correlation as a causal influence, and to predict its recurrence in the future. For one with no comprehension of what science is, it makes no difference whether that causation is or is not explainable rationally by a physical mechanism. Indeed, the very idea that a causal influence requires a physical mechanism to bring it about is quite foreign to the thinking of the uneducated; belief in supernatural influences makes such hypotheses, for them, unnecessary.8 Thus, the commentators for the very numerous television nature documentaries showing us the behavior of animals in the wild, never hesitate to see in every random mutation some teleological purpose; always, the environmental niche is there and the animal mutates, purposefully, in order to adapt to it. Every conformation of feather, beak, and claw is explained to us in terms of its purpose, but never suggesting how an unsubstantial purpose could bring about a physical change in the animal.9 It would seem that we have here a valuable opportunity to illustrate and explain evolution; yet the commentators (usually out-of-work actors) have no comprehension of the simple, easily understood cause-and-effect mechanism pointed out over 100 years ago by Charles Darwin. When we have the palpable evidence, and a simple explanation of it, before us, it is incredible that anybody could look to something supernatural, that nobody has ever observed, to explain it. But never does a commentator imagine that the mutation occurs first, and the resulting animal is obliged to seek a niche where it can survive and use its body structures as best it can in that environment. We see only the ones who were successful at this; the others are not around when the cameraman arrives, and their small numbers make it unlikely that a paleontologist will ever find evidence of them.10 These documentaries always have very beautiful photography, and they deserve commentaries that make sense. Indeed, there are powerful counter-examples to the theory that an animal adapts its body structure purposefully to its environment. In the Andes mountains there are woodpeckers where there are no trees. Evidently, they did not become woodpeckers by adapting their body 8 9

10

In the meantime, progress in human knowledge continues to be made by those who, like modern biologists, do think in terms of physical mechanisms; as soon as that premise is abandoned, progress ceases, as we observe in modern quantum theory. But it is hard to believe that the ridiculous color patterns of the wood duck and the pileated woodpecker serve any survival purpose; what would the teleologists have to say about this? Our answer would be that, even without subsequent natural selection, divergent evolution can proceed by mutations that have nothing to do with survival. We noted some of this in Chapter 7, in connection with the work of Francis Galton. But a striking exception was found in the Burgess shale of the Canadian Rockies (Gould, 1989), in which beautifully preserved fossils of soft-bodied creatures contemporary with trilobites, which did not survive to leave any evolutionary lines, were found in such profusion that it radically revised our picture of life in the Cambrian.

9 Repetitive experiments: probability and frequency

313

structures to their environment; rather, they were woodpeckers first who, finding themselves through some accident in a strange environment, survived by putting their body structures to a different use. Indeed, the creatures arriving at any environmental niche are seldom perfectly adapted to it; often they are just barely well enough adapted to survive. But then, in this stressful situation, bad mutations are eliminated faster than usual, so natural selection operates faster than usual to make them better adapted.

10 Physics of ‘random experiments’

I believe, for instance, that it would be very difficult to persuade an intelligent physicist that current statistical practice was sensible, but that there would be much less difficulty with an approach via likelihood and Bayes’ theorem. G. E. P. Box (1962) As we have noted several times, the idea that probabilities are physically real things, based ultimately on observed frequencies of random variables, underlies most recent expositions of probability theory, which would seem to make it a branch of experimental science. At the end of Chapter 8 we saw some of the difficulties that this view leads us to; in some real physical experiments the distinction between random and nonrandom quantities is so obscure and artificial that you have to resort to black magic in order to force this distinction into the problem at all. But that discussion did not reach into the serious physics of the situation. In this chapter, we take time off for an interlude of physical considerations that show the fundamental difficulty with the notion of ‘random’ experiments.

10.1 An interesting correlation There have always been dissenters from the ‘frequentist’ view who have maintained, with Laplace, that probability theory is properly regarded as the ‘calculus of inductive reasoning’, and is not fundamentally related to random experiments at all. A major purpose of the present work is to demonstrate that probability theory can deal, consistently and usefully, with far more than frequencies in random experiments. According to this view, consideration of random experiments is only one specialized application of probability theory, and not even the most important one; for probability theory as logic solves far more general problems of reasoning which have nothing to do with chance or randomness, but a great deal to do with the real world. In the present chapter we carry this further and show that ‘frequentist’ probability theory has major logical difficulties in dealing with the very random experiments for which it was invented. One who studies the literature of these matters perceives that there is a strong correlation; those who have advocated the non-frequency view have tended to be physicists, while, 314

10 Physics of ‘random experiments’

315

up until very recently, mathematicians, statisticians, and philosophers almost invariably favored the frequentist view. Thus, it appears that the issue is not merely one of philosophy or mathematics; in some way not yet clear, it also involves physics. The mathematician tends to think of a random experiment as an abstraction – really nothing more than a sequence of numbers. To define the ‘nature’ of the random experiment, he introduces statements – variously termed assumptions, postulates, or axioms – which specify the sample space and assert the existence, and certain other properties, of limiting frequencies. But, in the real world, a random experiment is not an abstraction whose properties can be defined at will. It is surely subject to the laws of physics; yet recognition of this is conspicuously missing from frequentist expositions of probability theory. Even the phrase ‘laws of physics’ is not to be found in them. However, defining a probability as a frequency is not merely an excuse for ignoring the laws of physics; it is more serious than that. We want to show that maintenance of a frequency interpretation to the exclusion of all others requires one to ignore virtually all the professional knowledge that scientists have about real phenomena. If the aim is to draw inferences about real phenomena, this is hardly the way to begin. As soon as a specific random experiment is described, it is the nature of a physicist to start thinking, not about the abstract sample space thus defined, but about the physical mechanism of the phenomenon being observed. The question whether the usual postulates of probability theory are compatible with the known laws of physics is capable of logical analysis, with results that have a direct bearing on the question, not of the mathematical consistency of frequency and non-frequency theories of probability, but of their applicability in real situations. In our opening quotation, the statistician G. E. P. Box noted this; let us analyze his statement in the light both of history and of physics. 10.2 Historical background As we know, probability theory started in consideration of gambling devices by Gerolamo Cardano in the 16th century, and by Pascal and Fermat in the 17th; but its development beyond that level, in the 18th and 19th centuries, was stimulated by applications in astronomy and physics, and was the work of people – James and Daniel Bernoulli, Laplace, Poisson, Legendre, Gauss, Boltzmann, Maxwell, Gibbs – most of whom we would describe today as mathematical physicists. Reactions against Laplace had begun in the mid-19th century, when Cournot (1843), Ellis (1842, 1863), Boole (1854), and Venn (1866) – none of whom had any training in physics – were unable to comprehend Laplace’s rationale and attacked what he did, simply ignoring all his successful results. In particular, John Venn, a philosopher without the tiniest fraction of Laplace’s knowledge of either physics or mathematics, nevertheless considered himself competent to write scathing, sarcastic attacks on Laplace’s work. In Chapter 16 we note his possible later influence on the young R. A. Fisher. Boole (1854, Chaps XX and XXI) shows repeatedly that he does not understand the function of Laplace’s prior probabilities (to represent a state of knowledge rather than a physical fact). In other words, he too suffers from

316

Part 1 Principles and elementary applications

the mind projection fallacy. On p. 380 he rejects a uniform prior probability assignment as ‘arbitrary’, and explicitly refuses to examine its consequences; by which tactics he prevents himself from learning what Laplace was really doing and why. Laplace was defended staunchly by the mathematician Augustus de Morgan (1838, 1847) and the physicist W. Stanley Jevons,1 who understood Laplace’s motivations and for whom his beautiful mathematics was a delight rather than a pain. Nevertheless, the attacks of Boole and Venn found a sympathetic hearing in England among non-physicists. Perhaps this was because biologists, whose training in physics and mathematics was for the most part not much better than Venn’s, were trying to find empirical evidence for Darwin’s theory and realized that it would be necessary to collect and analyze large masses of data in order to detect the small, slow trends that they visualized as the means by which evolution proceeds. Finding Laplace’s mathematical works too much to digest, and since the profession of statistician did not yet exist, they would naturally welcome suggestions that they need not read Laplace after all. In any event, a radical change took place at about the beginning of the 20th century when a new group of workers, not physicists, entered the field. They were concerned mostly with biological problems and with Venn’s encouragement proceeded to reject virtually everything done by Laplace. To fill the vacuum, they sought to develop the field anew based on entirely different principles in which one assigned probabilities only to data and to nothing else. Indeed, this did simplify the mathematics at first, because many of the problems solvable by Laplace’s methods now lay outside the gambit of their methods. As long as they considered only relatively simple problems (technically, problems with sufficient statistics but no nuisance parameters and no important prior information), the shortcoming was not troublesome. This extremely aggressive school soon dominated the field so completely that its methods have come to be known as ‘orthodox’ statistics, and the modern profession of statistician has evolved mostly out of this movement. Simultaneously with this development, the physicists – with Sir Harold Jeffreys as almost the sole exception – quietly retired from the field, and statistical analysis disappeared from the physics curriculum. This disappearance has been so complete that if today someone were to take a poll of physicists, we think that not one in 100 could identify such names as Fisher, Neyman or Wald, or such terms as maximum likelihood, confidence interval, analysis of variance. This course of events – the leading role of physicists in development of the original Bayesian methods, and their later withdrawal from orthodox statistics – was no accident. As further evidence that there is some kind of basic conflict between orthodox statistical doctrine and physics, we may note that two of the most eloquent proponents of nonfrequency definitions in the early 20th century – Poincar´e and Jeffreys – were mathematical physicists of the very highest competence, as was Laplace. Professor Box’s statement thus has a clear basis in historical fact.

1

Jevons did so many things that it is difficult to classify him by occupation. Zabell (1989), apparently guided by the title of one of his books (Jevons, 1874), describes Jevons as a logician and philosopher of science; from examination of his other works we are inclined to list him rather as a physicist who wrote extensively on economics.

10 Physics of ‘random experiments’

317

But what is the nature of this conflict? What is there in the physicist’s knowledge that leads him to reject the very thing that the others regard as conferring ‘objectivity’ on probability theory? To see where the difficulty lies, we examine a few simple random experiments from the physicist’s viewpoint. The facts we want to point out are so elementary that one cannot believe they are really unknown to modern writers on probability theory. The continual appearance of new textbooks which ignore them merely illustrates what we physics teachers have always known: you can teach a student the laws of physics, but you cannot teach him the art of recognizing the relevance of this knowledge, much less the habit of actually applying it, in his everyday problems.

10.3 How to cheat at coin and die tossing Cram´er (1946) takes it as an axiom that ‘any random variable has a unique probability distribution’. From the later context, it is clear that what he really means is that it has a unique frequency distribution. If one assumes that the number obtained by tossing a die is a random variable, this leads to the conclusion that the frequency with which a certain face comes up is a physical property of the die; just as much so as its mass, moment of inertia, or chemical composition. Thus, Cram´er (1946, p. 154) states: The numbers pr should, in fact, be regarded as physical constants of the particular die that we are using, and the question as to their numerical values cannot be answered by the axioms of probability theory, any more than the size and the weight of the die are determined by the geometrical and mechanical axioms. However, experience shows that in a well-made die the frequency of any event r in a long series of throws usually approaches 1/6, and accordingly we shall often assume that all the pr are equal to 1/6. . . .

To a physicist, this statement seems to show utter contempt for the known laws of mechanics. The results of tossing a die many times do not tell us any definite number characteristic only of the die. They tell us also something about how the die was tossed. If you toss ‘loaded’ dice in different ways, you can easily alter the relative frequencies of the faces. With only slightly more difficulty, you can still do this if your dice are perfectly ‘honest’. Although the principles will be just the same, it will be simpler to discuss a random experiment with only two possible outcomes per trial. Consider, therefore, a ‘biased’ coin, about which I. J. Good (1962) has remarked: Most of us probably think about a biased coin as if it had a physical probability. Now whether it is defined in terms of frequency or just falls out of another type of theory, I think we do argue that way. I suspect that even the most extreme subjectivist such as de Finetti would have to agree that he did sometimes think that way, though he would perhaps avoid doing it in print.

We do not know de Finetti’s private thoughts, but would observe that it is just the famous exchangeability theorem of de Finetti which shows us how to carry out a probability analysis of the biased coin without thinking in the manner suggested.

318

Part 1 Principles and elementary applications

In any event, it is easy to show how a physicist would analyze the problem. Let us suppose that the center of gravity of this coin lies on its axis, but displaced a distance x from its geometrical center. If we agree that the result of tossing this coin is a ‘random variable’, then, according to the axiom stated by Cram´er and hinted at by Good, there must exist a definite functional relationship between the frequency of heads and x: p H = f (x).

(10.1)

But this assertion goes far beyond the mathematician’s traditional range of freedom to invent arbitrary axioms, and encroaches on the domain of physics; for the laws of mechanics are quite competent to tell us whether such a functional relationship does or does not exist. The easiest game to analyze turns out to be just the one most often played to decide such practical matters as the starting side in a football game. Your opponent first calls ‘heads’ or ‘tails’ at will. You then toss the coin into the air, catch it in your hand, and, without looking at it, show it first to your opponent, who wins if he has called correctly. It is further agreed that a ‘fair’ toss is one in which the coin rises at least nine feet into the air, and thus spends at least 1.5 seconds in free flight. The laws of mechanics now tell us√the following. The ellipsoid of inertia of a thin disc is an oblate spheroid of eccentricity 1/ 2. The displacement x does not affect the symmetry of this ellipsoid, and, so according to the Poinsot construction, as found in textbooks on rigid dynamics (such as Routh, 1905, or Goldstein, 1980, Chap. 5), the polhodes remain circles concentric with the axis of the coin. In consequence, the character of the tumbling motion of the coin while in flight is exactly the same for a biased as an unbiased coin, except that for the biased one it is the center of gravity, rather than the geometrical center, which describes the parabolic ‘free particle’ trajectory. An important feature of this tumbling motion is conservation of angular momentum; during its flight the angular momentum of the coin maintains a fixed direction in space (but the angular velocity does not; and so the tumbling may appear chaotic to the eye). Let us denote this fixed direction by the unit vector n; it can be any direction you choose, and it is determined by the particular kind of twist you give the coin at the instant of launching. Whether the coin is biased or not, it will show the same face throughout the motion if viewed from this direction (unless, of course, n is exactly perpendicular to the axis of the coin, in which case it shows no face at all). Therefore, in order to know which face will be uppermost in your hand, you have only to carry out the following procedure. Denote by k a unit vector passing through the coin along its axis, with its point on the ‘heads’ side. Now toss the coin with a twist so that k and n make an acute angle, then catch it with your palm held flat, in a plane normal to n. On successive tosses, you can let the direction of n, the magnitude of the angular momentum, and the angle between n and k, vary widely; the tumbling motion will then appear entirely different to the eye on different tosses, and it would require almost superhuman powers of observation to discover your strategy. Thus, anyone familiar with the law of conservation of angular momentum can, after some practice, cheat at the usual coin-toss game and call his shots with 100% accuracy. You can

10 Physics of ‘random experiments’

319

obtain any frequency of heads you want – and the bias of the coin has no influence at all on the results! Of course, as soon as this secret is out, someone will object that the experiment analyzed is too ‘simple’. In other words, those who have postulated a physical probability for the biased coin have, without stating so, really had in mind a more complicated experiment in which some kind of ‘randomness’ has more opportunity to make itself felt. While accepting this criticism, we cannot suppress the obvious comment: scanning the literature of probability theory, isn’t it curious that so many mathematicians, usually far more careful than physicists to list all the qualifications needed to make a statement correct, should have failed to see the need for any qualifications here? However, to be more constructive, we can just as well analyze a more complicated experiment. Suppose that now, instead of catching the coin in our hands, we toss it onto a table, and let it spin and bounce in various ways until it comes to rest. Is this experiment sufficiently ‘random’ so that the true ‘physical probability’ will manifest itself? No doubt, the answer will be that it is not sufficiently random if the coin is merely tossed up six inches starting at the table level, but it will become a ‘fair’ experiment if we toss it up higher. Exactly how high, then, must we toss it before the true physical probability can be measured? This is not an easy question to answer, and we make no attempt to answer it here. It would appear, however, that anyone who asserts the existence of a physical probability for the coin ought to be prepared to answer it; otherwise, it is hard to see what content the assertion has (that is, the assertion has the nature of theology rather than science; there is no way to confirm it or disprove it). We do not deny that the bias of the coin will now have some influence on the frequency of heads; we claim only that the amount of that influence depends very much on how you toss the coin so that, again in this experiment, there is no definite number p H = f (x) describing a physical property of the coin. Indeed, even the direction of this influence can be reversed by different methods of tossing, as follows. However high we toss the coin, we still have the law of conservation of angular momentum; and so we can toss it by method A: to ensure that heads will be uppermost when the coin first strikes the table, we have only to hold it heads up, and toss it so that the total angular momentum is directed vertically. Again, we can vary the magnitude of the angular momentum, and the angle between n and k, so that the motion appears quite different to the eye on different tosses, and it would require very close observation to notice that heads remains uppermost throughout the free flight. Although what happens after the coin strikes the table is complicated, the fact that heads is uppermost at first has a strong influence on the result, which is more pronounced for large angular momentum. Many people have developed the knack of tossing a coin by method B: it goes through a phase of standing on edge and spinning rapidly about a vertical axis, before finally falling to one side or the other. If you toss the coin this way, the eccentric position of the center of gravity will have a dominating influence, and render it practically certain that it will fall always showing the same face. Ordinarily, one would suppose that the coin prefers to fall in the position which gives it the lowest center of gravity; i.e., if the center of gravity is

320

Part 1 Principles and elementary applications

displaced toward tails, then the coin should have a tendency to show heads. However, for an interesting mechanical reason, which we leave for you to work out from the principles of rigid dynamics, method B produces the opposite influence, the coin strongly preferring to fall so that its center of gravity is high. On the other hand, the bias of the coin has a rather small influence in the opposite direction if we toss it by method C: the coin rotates about a horizontal axis which is perpendicular to the axis of the coin, and so bounces until it can no longer turn over. In this experiment also, a person familiar with the laws of mechanics can toss a biased coin so that it will produce predominantly either heads or tails, at will. Furthermore, the effect of method A persists whether the coin is biased or not; and so one can even do this with a perfectly ‘honest’ coin. Finally, although we have been considering only coins, essentially the same mechanical considerations (with more complicated details) apply to the tossing of any other object, such as a die. The writer has never thought of a biased coin ‘as if it had a physical probability’ because, being a professional physicist, I know that it does not have a physical probability. From the fact that we have seen a strong preponderance of heads, we cannot conclude legitimately that the coin is biased; it may be biased, or it may have been tossed in a way that systematically favors heads. Likewise, from the fact that we have seen equal numbers of heads and tails, we cannot conclude legitimately that the coin is ‘honest’. It may be honest, or it may have been tossed in a way that nullifies the effect of its bias. 10.3.1 Experimental evidence Since the conclusions just stated are in direct contradiction to what is postulated, almost universally, in expositions of probability theory, it is worth noting that we can verify them easily in a few minutes of experimentation in a kitchen. An excellent ‘biased coin’ is provided by the metal lid of a small pickle jar, of the type which is not knurled on the outside, and has the edge rolled inward rather than outward, so that the outside surface is accurately round and smooth, and so symmetrical that on an edge view one cannot tell which is the top side. Suspecting that many people not trained in physics simply would not believe the things just claimed without experimental proof, we have performed these experiments with a jar lid of diameter d = 2 58 inches, height h = 38 inch. Assuming a uniform thickness for the metal, the center of gravity should be displaced from the geometrical center by a distance x = dh/(2d + 8h) = 0.120 inches; and this was confirmed by hanging the lid by its edge and measuring the angle at which it comes to rest. Ordinarily, one expects this bias to make the lid prefer to fall bottom side (i.e., the inside) up; and so this side will be called ‘heads’. The lid was tossed up about 6 feet, and fell onto a smooth linoleum floor. I allowed myself ten practice tosses by each of the three methods described, and then recorded the results of a number of tosses by: method A deliberately favoring heads, method A deliberately favoring tails, method B, and method C, as given in Table 10.1. In method A the mode of tossing completely dominated the result (the effect of bias would, presumably, have been greater if the ‘coin’ were tossed onto a surface with a greater

10 Physics of ‘random experiments’

321

Table 10.1. Results of tossing a ‘biased coin’ in four different ways. Method

Number of tosses

Number of heads

A(H ) A(T ) B C

100 50 100 100

99 0 0 54

coefficient of friction). In method B, the bias completely dominated the result (in about 30 of these tosses it looked for a while as if the result were going to be heads, as one might naively expect; but each time the ‘coin’ eventually righted itself and turned over, as predicted by the laws of rigid dynamics). In method C, there was no significant evidence for any effect of bias. The conclusions are pretty clear. A holdout can always claim that tossing the coin in any of the four specific ways described is ‘cheating’, and that there exists a ‘fair’ way of tossing it, such that the ‘true’ physical probabilities of the coin will emerge from the experiment. But again, the person who asserts this should be prepared to define precisely what this fair method is, otherwise the assertion is without content. Presumably, a fair method of tossing ought to be some kind of random mixture of methods A(H ), A(T ), B, C, and others; but what is a ‘fair’ relative weighting to give them? It is difficult to see how one could define a ‘fair’ method of tossing except by the condition that it should result in a certain frequency of heads; and so we are involved in a circular argument. This analysis can be carried much further, as we shall do below; but perhaps it is sufficiently clear already that analysis of coin and die tossing is not a problem of abstract statistics, in which one is free to introduce postulates about ‘physical probabilities’ which ignore the laws of physics. It is a problem of mechanics, highly complicated and irrelevant to probability theory except insofar as it forces us to think a little more carefully about how probability theory must be formulated if it is to be applicable to real situations. Performing a random experiment with a coin does not tell us what the physical probability for heads is; it may tell us something about the bias, but it also tells us something about how the coin is being tossed. Indeed, unless we know how it is being tossed, we cannot draw any reliable inferences about its bias from the experiment. It may not, however, be clear from the above that conclusions of this type hold quite generally for random experiments, and in no way depend on the particular mechanical properties of coins and dice. In order to illustrate this, consider an entirely different kind of random experiment, as a physicist views it. 10.4 Bridge hands Elsewhere we quote Professor William Feller’s pronouncements on the use of Bayes’ theorem in quality control testing (Chapter 17), on Laplace’s rule of succession (Chapter 18),

322

Part 1 Principles and elementary applications

and on Daniel Bernoulli’s conception of the utility function for decision theory (Chapter 13). He does not fail us here either; in his interesting textbook (Feller, 1950), he writes: The number of possible distributions of cards in bridge is almost 1030 . Usually, we agree to consider them as equally probable. For a check of this convention more than 1030 experiments would be required – a billion of billion of years if every living person played one game every second, day and night.

Here again, we have the view that bridge hands possess ‘physical probabilities,’ that the uniform probability assignment is a ‘convention’, and that the ultimate criterion for its correctness must be observed frequencies in a random experiment. The thing which is wrong here is that none of us – not even Feller – would be willing to use this criterion with a real deck of cards. Because, if we know that the deck is an honest one, our common sense tells us something which carries more weight than 1030 random experiments do. We would, in fact, be willing to accept the result of the random experiment only if it agreed with our preconceived notion that all distributions are equally likely. To many, this last statement will seem like pure blasphemy – it stands in violent contradiction to what we have all been taught is the correct attitude toward probability theory. Yet, in order to see why it is true, we have only to imagine that those 1030 experiments had been performed, and the uniform distribution was not forthcoming. If all distributions of cards have equal frequencies, then any combination of two specified cards will appear together in a given hand, on the average, once in (52 × 51)/(13 × 12) = 17 deals. But suppose that the combination ( jack of hearts – seven of clubs) appeared together in each hand three times as often as this. Would we then accept it as an established fact that there is something about the particular combination ( jack of hearts – seven of clubs) that makes it inherently more likely than others? We would not. We would reject the experiment and say that the cards had not been properly shuffled. But once again we are involved in a circular argument, because there is no way to define a ‘proper’ method of shuffling except by the condition that it should produce all distributions with equal frequency! Any attempt to find such a definition involves one in even deeper logical difficulties; one dare not describe the procedure of shuffling in exact detail because that would destroy the ‘randomness’ and make the exact outcome predictable and always the same. In order to keep the experiment ‘random’, one must describe the procedure incompletely, so that the outcome will be different on different runs. But how could one prove that an incompletely defined procedure will produce all distributions with equal frequency? It seems to us that the attempt to uphold Feller’s postulate of physical probabilities for bridge hands leads one into an outright logical contradiction. Conventional teaching holds that probability assignments must be based fundamentally on frequencies; and that any other basis is at best suspect, at worst irrational with disastrous consequences. On the contrary, this example shows very clearly that there is a principle for determining probability assignments which has nothing to do with frequencies, yet is so compelling that it takes precedence over any amount of frequency data. If present teaching

10 Physics of ‘random experiments’

323

does not admit the existence of this principle, it is only because our intuition has run so far ahead of logical analysis – just as it does in elementary geometry – that we have never taken the trouble to present that logical analysis in a mathematically respectable form. But if we learn how to do this, we may expect to find that the mathematical formulation can be applied to a much wider class of problems, where our intuition alone would hardly suffice. In carrying out a probability analysis of bridge hands, are we really concerned with physical probabilities, or with inductive reasoning? To help answer this, consider the following scenario. The date is 1956, when the writer met Willy Feller and had a discussion with him about these matters. Suppose I had told him that I have dealt at bridge 1000 times, shuffling ‘fairly’ each time; and that in every case the seven of clubs was in my own hand. What would his reaction be? He would, I think, mentally visualize the number 1000 1 = 10−602 , 4

(10.2)

and conclude instantly that I have not told the truth; and no amount of persuasion on my part would shake that judgment. But what accounts for the strength of his belief? Obviously, it cannot be justified if our assignment of equal probabilities to all distributions of cards (therefore probability 1/4 for the seven of clubs to be in the dealer’s hand) is merely a ‘convention’, subject to change in the light of experimental evidence; he rejects my reported experimental evidence, just as we did above. Even more obviously, he is not making use of any knowledge about the outcome of an experiment involving 1030 bridge hands. Then what is the extra evidence he has, which his common sense tells him carries more weight than do any number of random experiments, but whose help he refuses to acknowledge in writing textbooks? In order to maintain the claim that probability theory is an experimental science, based fundamentally not on logical inference but on frequency in a random experiment, it is necessary to suppress some of the information which is available. This suppressed information, however, is just what enables our inferences to approach the certainty of deductive reasoning in this example and many others. The suppressed evidence is, of course, simply our recognition of the symmetry of the situation. The only difference between a seven and an eight is that there is a different number printed on the face of the card. Our common sense tells us that where a card goes in shuffling depends only on the mechanical forces that are applied to it; and not on which number is printed on its face. If we observe any systematic tendency for one card to appear in the dealer’s hand, which persists on indefinite repetitions of the experiment, we can conclude from this only that there is some systematic tendency in the procedure of shuffling, which alone determines the outcome of the experiment. Once again, therefore, performing the experiment tells you nothing about the ‘physical probabilities’ of different bridge hands. It tells you something about how the cards are being shuffled. But the full power of symmetry as cogent evidence has not yet been revealed in this argument; we return to it presently.

324

Part 1 Principles and elementary applications

10.5 General random experiments In the face of all the foregoing arguments, one can still take the following position (as a member of the audience did after one of the writer’s lectures): ‘You have shown only that coins, dice, and cards represent exceptional cases, where physical considerations obviate the usual probability postulates; i.e., they are not really ‘random experiments’. But that is of no importance because these devices are used only for illustrative purposes; in the more dignified random experiments which merit the serious attention of the scientist, there is a physical probability.’ To answer this we note two points. Firstly, we reiterate that when anyone asserts the existence of a physical probability in any experiment, then the onus is on him to define the exact circumstances in which this physical probability can be measured; otherwise the assertion is without content. This point needs to be stressed: those who assert the existence of physical probabilities do so in the belief that this establishes for their position an ‘objectivity’ that those who speak only of a ‘state of knowledge’ lack. Yet to assert as fact something which cannot be either proved or disproved by observation of facts is the opposite of objectivity; it is to assert something that one could not possibly know to be true. Such an assertion is not even entitled to be called a description of a ‘state of knowledge’. Secondly, note that any specific experiment for which the existence of a physical probability is asserted is subject to physical analysis like the ones just given, which will lead eventually to an understanding of its mechanism. But as soon as this understanding is reached, then this new experiment will also appear as an exceptional case like the above ones, where physical considerations obviate the usual postulates of physical probabilities. For, as soon as we have understood the mechanism of any experiment E, then there is logically no room for any postulate that various outcomes possess physical probabilities; the question: ‘What are the probabilities of various outcomes (O1 , O2 , . . .)?’ then reduces immediately to the question: ‘What are the probabilities of the corresponding initial conditions (I1 , I2 , . . .) that lead to these outcomes?’ We might suppose that the possible initial conditions {Ik } of experiment E themselves possess physical probabilities. But then we are considering an antecedent random experiment E , which produces conditions Ik as its possible outcomes: Ik = Ok . We can analyze the physical mechanism of E and, as soon as this is understood, the question will revert to: ‘What are the probabilities of the various initial conditions Ik for experiment E ?’ Evidently, we are involved in an infinite regress {E, E , E , . . .}; the attempt to introduce a physical probability will be frustrated at every level where our knowledge of physical law permits us to analyze the mechanism involved. The notion of ‘physical probability’ must retreat continually from one level to the next, as knowledge advances. We are, therefore, in a situation very much like the ‘warfare between science and theology’ of earlier times. For several centuries, theologians with no factual knowledge of astronomy, physics, biology, and geology nevertheless considered themselves competent to make dogmatic factual assertions which encroached on the domains of those

10 Physics of ‘random experiments’

325

fields – assertions which they were later forced to retract one by one in the face of advancing knowledge. Clearly, probability theory ought to be formulated in a way that avoids factual assertions properly belonging to other fields, and which will later need to be retracted (as is now the case for many assertions in the literature concerning coins, dice, and cards). It appears to us that the only formulation which accomplishes this, and at the same time has the analytical power to deal with the current problems of science, is the one which was seen and expounded on intuitive grounds by Laplace and Jeffreys. Its validity is a question of logic, and does not depend on any physical assumptions. As we saw in Chapter 2, a major contribution to that logic was made by R. T. Cox (1946, 1961), who showed that those intuitive grounds can be replaced by theorems. We think it is no accident that Richard Cox was also a physicist (Professor of Physics and Dean of the Graduate School at Johns Hopkins University), to whom the things we have pointed out here would be evident from the start. The Laplace–Jeffreys–Cox formulation of probability theory does not require us to take one reluctant step after another down that infinite regress; it recognizes that anything which – like the child’s spook – continually recedes from the light of detailed inspection can exist only in our imagination. Those who believe most strongly in physical probabilities, like those who believe in astrology, never seem to ask what would constitute a controlled experiment capable of confirming or disproving their belief. Indeed, the examples of coins and cards should persuade us that such controlled experiments are, in principle, impossible. Performing any of the so-called random experiments will not tell us what the ‘physical probabilities’ are, because there is no such thing as a ‘physical probability’; we might as well ask for a square circle. The experiment tells us, in a very crude and incomplete way, something about how the initial conditions are varying from one repetition to another. A much more efficient way of obtaining this information would be to observe the initial conditions directly. However, in many cases this is beyond our present abilities; as in determining the safety and effectiveness of a new medicine. Here the only fully satisfactory approach would be to analyze the detailed sequence of chemical reactions that follow the taking of this medicine, in persons of every conceivable state of health. Having this analysis, one could then predict, for each individual patient, exactly what the effect of the medicine will be. Such an analysis being entirely out of the question at present, the only feasible way of obtaining information about the effectiveness of a medicine is to perform a ‘random’ experiment. No two patients are in exactly the same state of health; and the unknown variations in this factor constitute the variable initial conditions of the experiment, while the sample space comprises the set of distinguishable reactions to the medicine. Our use of probability theory in this case is a standard example of inductive reasoning which amounts to the following. If the initial conditions of the experiment (i.e., the physiological conditions of the patients who come to us) continue in the future to vary over the same unknown range as they have in the past, then the relative frequency of cures will, in the future, approximate those which

326

Part 1 Principles and elementary applications

we have observed in the past. In the absence of positive evidence giving a reason why there should be some change in the future, and indicating in which direction this change should go, we have no grounds for predicting any change in either direction, and so can only suppose that things will continue in more or less the same way. As we observe the relative frequencies of cures and side-effects to remain stable over longer and longer times, we become more and more confident about this conclusion. But this is only inductive reasoning – there is no deductive proof that frequencies in the future will not be entirely different from those in the past. Suppose now that the eating habits or some other aspect of the lifestyle of the population starts to change. Then, the state of health of the incoming patients will vary over a different range than before, and the frequency of cures for the same treatment may start to drift up or down. Conceivably, monitoring this frequency could be a useful indicator that the habits of the population are changing, and this in turn could lead to new policies in medical procedures and public health education. At this point, we see that the logic invoked here is virtually identical with that of industrial quality control, discussed in Chapter 4. But looking at it in this greater generality makes us see the role of induction in science in a very different way than has been imagined by some philosophers.

10.6 Induction revisited As we noted in Chapter 9, some philosophers have rejected induction on the grounds that there is no way to prove that it is ‘right’ (theories can never attain a high probability); but this misses the point. The function of induction is to tell us not which predictions are right, but which predictions are indicated by our present knowledge. If the predictions succeed, then we are pleased and become more confident of our present knowledge; but we have not learned much. The real role of induction in science was pointed out clearly by Harold Jeffreys (1931, Chap. 1) over 60 years ago; yet, to the best of our knowledge, no mathematician or philosopher has ever taken the slightest note of what he had to say: A common argument for induction is that induction has always worked in the past and therefore may be expected to hold in the future. It has been objected that this is itself an inductive argument and cannot be used in support of induction. What is hardly ever mentioned is that induction has often failed in the past and that progress in science is very largely the consequence of direct attention to instances where the inductive method has led to incorrect predictions.

Put more strongly, it is only when our inductive inferences are wrong that we learn new things about the real world. For a scientist, therefore, the quickest path to discovery is to examine those situations where it appears most likely that induction from our present knowledge will fail. But those inferences must be our best inferences, which make full use of all the knowledge we have. One can always make inductive inferences that are wrong in a useless way, merely by ignoring cogent information.

10 Physics of ‘random experiments’

327

Indeed, that is just what Popper did. His trying to interpret probability itself as expressing physical causation not only cripples the applications of probability theory in the way we saw in Chapter 3 (it would prevent us from getting about half of all conditional probabilities right because they express logical connections rather than causal physical ones), it leads one to conjure up imaginary causes while ignoring what was already known about the real physical causes at work. This can reduce our inferences to the level of pre-scientific, uneducated superstition, even when we have good data. Why do physicists see this more readily than others? Because, having created this knowledge of physical law, we have a vested interest in it and want to see it preserved and used. Frequency or propensity interpretations start by throwing away practically all the professional knowledge that we have labored for centuries to get. Those who have not comprehended this are in no position to discourse to us on the philosophy of science or the proper methods of inference. 10.7 But what about quantum theory? Those who cling to a belief in the existence of ‘physical probabilities’ may react to the above arguments by pointing to quantum theory, in which physical probabilities appear to express the most fundamental laws of physics. Therefore let us explain why this is another case of circular reasoning. We need to understand that present quantum theory uses entirely different standards of logic than does the rest of science. In biology or medicine, if we note that an effect E (for example, muscle contraction, phototropism, digestion of protein) does not occur unless a condition C (nerve impulse, light, pepsin) is present, it seems natural to infer that C is a necessary causative agent for E. Most of what is known in all fields of science has resulted from following up this kind of reasoning. But suppose that condition C does not always lead to effect E; what further inferences should a scientist draw? At this point, the reasoning formats of biology and quantum theory diverge sharply. In the biological sciences, one takes it for granted that in addition to C there must be some other causative factor F, not yet identified. One searches for it, tracking down the assumed cause by a process of elimination of possibilities that is sometimes extremely tedious. But persistence pays off; over and over again, medically important and intellectually impressive success has been achieved, the conjectured unknown causative factor being finally identified as a definite chemical compound. Most enzymes, vitamins, viruses, and other biologically active substances owe their discovery to this reasoning process. In quantum theory, one does not reason in this way. Consider, for example, the photoelectric effect (we shine light on a metal surface and find that electrons are ejected from it). The experimental fact is that the electrons do not appear unless light is present. So light must be a causative factor. But light does not always produce ejected electrons; even though the light from a unimode laser is present with absolutely steady amplitude, the electrons appear only at particular times that are not determined by any known parameters of the light. Why then do we not draw the obvious inference, that in addition to the light there

328

Part 1 Principles and elementary applications

must be a second causative factor, still unidentified, and the physicist’s job is to search for it? What is done in quantum theory today is just the opposite; when no cause is apparent one simply postulates that no cause exists – ergo, the laws of physics are indeterministic and can be expressed only in probability form. The central dogma is that the light determines not whether a photoelectron will appear, but only the probability that it will appear. The mathematical formalism of present quantum theory – incomplete in the same way that our present knowledge is incomplete – does not even provide the vocabulary in which one could ask a question about the real cause of an event. Biologists have a mechanistic picture of the world because, being trained to believe in causes, they continue to use the full power of their brains to search for them – and so they find them. Quantum physicists have only probability laws because for two generations we have been indoctrinated not to believe in causes – and so we have stopped looking for them. Indeed, any attempt to search for the causes of microphenomena is met with scorn and a charge of professional incompetence and ‘obsolete mechanistic materialism’. Therefore, to explain the indeterminacy in current quantum theory we need not suppose there is any indeterminacy in Nature; the mental attitude of quantum physicists is already sufficient to guarantee it.2 This point also needs to be stressed, because most people who have not studied quantum theory on the full technical level are incredulous when told that it does not concern itself with causes; and, indeed, it does not even recognize the notion of ‘physical reality’. The currently taught interpretation of the mathematics is due to Niels Bohr, who directed the Institute for Theoretical Physics in Copenhagen; therefore it has come to be called ‘The Copenhagen interpretation’. As Bohr stressed repeatedly in his writings and lectures, present quantum theory can answer only questions of the form: ‘If this experiment is performed, what are the possible results and their probabilities?’ It cannot, as a matter of principle, answer any question of the form: ‘What is really happening when . . .?’ Again, the mathematical formalism of present quantum theory, like Orwellian newspeak, does not even provide the vocabulary in which one could ask such a question. These points have been explained in some detail by Jaynes (1986d, 1989, 1990a, 1992a). We suggest, then, that those who try to justify the concept of ‘physical probability’ by pointing to quantum theory are entrapped in circular reasoning, not basically different from that noted above with coins and bridge hands. Probabilities in present quantum theory express the incompleteness of human knowledge just as truly as did those in classical statistical mechanics; only its origin is different. 2

Here, there is a striking similarity to the position of the parapsychologists Soal and Bateman (1954), discussed in Chapter 5. They suggest that to seek a physical explanation of parapsychological phenomena is a regression to the quaint and reprehensible materialism of Thomas Huxley. Our impression is that by 1954 the views of Huxley in biology were in a position of complete triumph over vitalism, supernaturalism, or any other anti-materialistic teachings; for example, the long mysterious immune mechanism was at last understood, and the mechanism of DNA replication had just been discovered. In both cases the phenomena could be described in ‘mechanistic’ terms so simple and straightforward – templates, geometrical fit, etc. – that they would be understood immediately in a machine shop.

10 Physics of ‘random experiments’

329

In classical statistical mechanics, probability distributions represented our ignorance of the true microscopic coordinates – ignorance that was avoidable in principle but unavoidable in practice, but which did not prevent us from predicting reproducible phenomena, just because those phenomena are independent of the microscopic details. In current quantum theory, probabilities express our own ignorance due to our failure to search for the real causes of physical phenomena; and, worse, our failure even to think seriously about the problem. This ignorance may be unavoidable in practice, but in our present state of knowledge we do not know whether it is unavoidable in principle; the ‘central dogma’ simply asserts this, and draws the conclusion that belief in causes, and searching for them, is philosophically na¨ıve. If everybody accepted this and abided by it, no further advances in understanding of physical law would ever be made; indeed, no such advance has been made since the 1927 Solvay Congress in which this mentality became solidified into physics.3 But it seems to us that this attitude places a premium on stupidity; to lack the ingenuity to think of a rational physical explanation is to support the supernatural view. To many people, these ideas are almost impossible to comprehend because they are so radically different from what we have all been taught from childhood. Therefore, let us show how just the same situation could have happened in coin tossing, had classical physicists used the same standards of logic that are now used in quantum theory.

10.8 Mechanics under the clouds We are fortunate that the principles of Newtonian mechanics could be developed and verified to great accuracy by studying astronomical phenomena, where friction and turbulence do not complicate what we see. But suppose the Earth were, like Venus, enclosed perpetually in thick clouds. The very existence of an external universe would be unknown for a long time, and to develop the laws of mechanics we would be dependent on the observations we could make locally. Since tossing of small objects is nearly the first activity of every child, it would be observed very early that they do not always fall with the same side up, and that all one’s efforts to control the outcome are in vain. The natural hypothesis would be that it is the volition of the object tossed, not the volition of the tosser, that determines the outcome; indeed, that is the hypothesis that small children make when questioned about this. Then it would be a major discovery, once coins had been fabricated, that they tend to show both sides about equally often; and the equality appears to get better as the number of tosses increases. The equality of heads and tails would be seen as a fundamental law of physics; symmetric objects have a symmetric volition in falling (as, indeed, Cram´er and Feller seem to have thought). 3

Of course, physicists continued discovering new particles and calculation techniques – just as an astronomer can discover a new planet and a new algorithm to calculate its orbit, without any advance in his basic understanding of celestial mechanics.

330

Part 1 Principles and elementary applications

With this beginning, we could develop the mathematical theory of object tossing, discovering the binomial distribution, the absence of time correlations, the limit theorems, the combinatorial frequency laws for tossing of several coins at once, the extension to more complicated symmetric objects like dice, etc. All the experimental confirmations of the theory would consist of more and more tossing experiments, measuring the frequencies in more and more elaborate scenarios. From such experiments, nothing would ever be found that called into question the existence of that volition of the object tossed; they only enable one to confirm that volition and measure it more and more accurately. Then, suppose that someone was so foolish as to suggest that the motion of a tossed object is determined, not by its own volition, but by laws like those of Newtonian mechanics, governed by its initial position and velocity. He would be met with scorn and derision; for in all the existing experiments there is not the slightest evidence for any such influence. The Establishment would proclaim that, since all the observable facts are accounted for by the volition theory, it is philosophically na¨ıve and a sign of professional incompetence to assume or search for anything deeper. In this respect, the elementary physics textbooks would read just like our present quantum theory textbooks. Indeed, anyone trying to test the mechanical theory would have no success; however carefully he tossed the coin (not knowing what we know) it would persist in showing head and tails about equally often. To find any evidence for a causal instead of a statistical theory would require control over the initial conditions of launching, orders of magnitude more precise than anyone can achieve by hand tossing. We would continue almost indefinitely, satisfied with laws of physical probability and denying the existence of causes for individual tosses external to the object tossed – just as quantum theory does today – because those probability laws account correctly for everything that we can observe reproducibly with the technology we are using. After thousands of years of triumph of the statistical theory, someone finally makes a machine which tosses coins in absolutely still air, with very precise control of the exact initial conditions. Magically, the coin starts giving unequal numbers of heads and tails; the frequency of heads is being controlled partially by the machine. With development of more and more precise machines, one finally reaches a degree of control where the outcome of the toss can be predicted with 100% accuracy. Belief in ‘physical probabilities’ expressing a volition of the coin is recognized finally as an unfounded superstition. The existence of an underlying mechanical theory is proved beyond question; and the long success of the previous statistical theory is seen as due only to the lack of control over the initial conditions of the tossing. Because of recent spectacular advances in the technology of experimentation, with increasingly detailed control over the initial states of individual atoms (see, for example, Rempe, Walter and Klein, 1987), we think that the stage is going to be set, before very many more years have passed, for the same thing to happen in quantum theory; a century from now the true causes of microphenomena will be known to every schoolboy and, to paraphrase Seneca, they will be incredulous that such clear truths could have escaped us throughout the 20th (and into the 21st) century.

10 Physics of ‘random experiments’

331

10.9 More on coins and symmetry Now we go into a more careful, detailed discussion of some of these points, alluding to technical matters that must be explained more fully elsewhere. The rest of this chapter is not for the casual reader; only the one who wants a deeper understanding than is conveyed by the above simple scenarios. But many of the attacks on Laplace arise from failure to comprehend the following points. The problems in which intuition compels us most strongly to a uniform probability assignment are not the ones in which we merely apply a principle of ‘equal distribution of ignorance’. Thus, to explain the assignment of equal probabilities to heads and tails on the grounds that we ‘saw no reason why either face should be more likely than the other’, fails utterly to do justice to the reasoning involved. The point is that we have not merely ‘equal ignorance’. We also have positive knowledge of the symmetry of the problem; and introspection will show that when this positive knowledge is lacking, so also is our intuitive compulsion toward a uniform distribution. In order to find a respectable mathematical formulation, we therefore need to find first a more respectable verbal formulation. We suggest that the following verbalization does do justice to the reasoning, and shows us how to generalize the principle. I perceive here two different problems: having formulated one definite problem – call it P1 – involving the coin, the operation which interchanges heads and tails transforms the problem into a different one – call it P2 . If I have positive knowledge of the symmetry of the coin, then I know that all relevant dynamical or statistical considerations, however complicated, are exactly the same in the two problems. Whatever state of knowledge I had in P1 , I must therefore have exactly the same state of knowledge in P2 , except for the interchange of heads and tails. Thus, whatever probability I assign to heads in P1 , consistency demands that I assign the same probability to tails in P2 .

Now, it might be quite reasonable to assign probability 2/3 to heads, 1/3 to tails in P1 ; whereupon, from symmetry, it must be 2/3 to tails, 1/3 to heads in P2 . This might be the case, for example, if P1 specified that the coin is to be held between the fingers heads up, and dropped just one inch onto a table. Thus, symmetry of the coin by no means compels us to assign equal probabilities to heads and tails; the question necessarily involves the other conditions of the problem. But now suppose the statement of the problem is changed in just one respect; we are no longer told whether the coin is held initially with heads up or tails up. In this case, our intuition suddenly takes over with a compelling force, and tells us that we must assign equal probabilities to heads and tails; and, in fact, we must do this regardless of what frequencies have been observed in previous repetitions of the experiment. The great power of symmetry arguments lies just in the fact that they are not deterred by any amount of complication in the details. The conservation laws of physics arise in this way; thus, conservation of angular momentum for an arbitrarily complicated system of particles is a simple consequence of the fact that the Lagrangian is invariant under space rotations. In current theoretical physics, almost the only known exact results in atomic and

332

Part 1 Principles and elementary applications

nuclear structure are those which we can deduce by symmetry arguments, using the methods of group theory. These methods could be of the highest importance in probability theory also, if orthodox ideology did not forbid their use. For example, they enable us, in many cases, to extend the principle of indifference to find consistent prior probability assignments in a continuous parameter space , where its use has always been considered ambiguous. The basic point is that a consistent principle for assigning prior probabilities must have the property that it assigns equivalent priors to represent equivalent states of knowledge. The prior distribution must therefore be invariant under the symmetry group of the problem; and so the prior can be specified arbitrarily only in the so-called ‘fundamental domain’ of the group (Wigner, 1959). This is a subspace 0 ⊂ such that (1) applying two different group elements gi = g j to 0 , the subspaces i ≡ gi , 0 , j ≡ g j , 0 are disjoint; and (2) carrying out all group operations on 0 just generates the full hypothesis space: ∪ j j = . For example, let points in a plane be defined by their polar coordinates (r, α). If the group is the four-element one generated by a 90◦ rotation of the plane, then any sector 90◦ wide, such as (β ≤ α < β + π/2), is a fundamental domain. Specifying the prior in any such sector, symmetry under the group then determines the prior everywhere in the plane. If the group contains a continuous symmetry operation, the dimensionality of the fundamental domain is less than that of the parameter space; and so the probability density need be specified only on a set of points of measure zero, whereupon it is determined everywhere. If the number of continuous symmetry operations is equal to the dimensionality of the space , the fundamental domain reduces to a single point, and the prior probability distribution is then uniquely determined by symmetry alone, just as it is in the case of an honest coin. Later we shall formalize and generalize these symmetry arguments. There is still an important constructive point to be made about the power of symmetry arguments in probability theory. To see it, let us go back for a closer look at the cointossing problem. The laws of mechanics determine the motion of the coin, as describing a certain trajectory in a 12-dimensional phase space (three coordinates (q1 , q2 , q3 ) of its center of mass, three Eulerian angles (q4 , q5 , q6 ) specifying its orientation, and six associated momenta ( p1 , . . . , p6 )). The difficulty of predicting the outcome of a toss arises from the fact that very small changes in the location of the initial phase point can change the final results. Imagine the possible initial phase points to be labeled H or T , according to the final results. Contiguous points labeled H comprise a set which is presumably twisted about in the 12-dimensional phase space in a very complicated, convoluted way, parallel to and separated by similar T -sets. Consider now a region R of phase space, which represents the accuracy with which a human hand can control the initial phase point. Because of limited skill, we can be sure only that the initial point is somewhere in R, which has a phase volume dq1 · · · dq6 d p1 · · · d p6 .

(R) = R

(10.3)

10 Physics of ‘random experiments’

333

If the region R contains both H and T domains, we cannot predict the result of the toss. But what probability should we assign to heads? If we assign equal probability to equal phase volumes in R, this is evidently the fraction p H ≡ (H )/ (R) of phase volume of R that is occupied by H domains. This phase volume is the ‘invariant measure’ of phase space. The cogency of invariant measures for probability theory will be explained later; for now we note that the measure is invariant under a large group of ‘canonical’ coordinate transformations, and also under the time development, according to the equations of motion. This is Liouville’s theorem, fundamental to statistical mechanics; the exposition of Gibbs (1902) devotes the first three chapters to discussion of it, before introducing probabilities. Now, if we have positive knowledge that the coin is perfectly ‘honest’, then it is clear that the fraction (H )/ (R) is very nearly 1/2, and becomes more accurately so as the size of the individual H and T domains become smaller compared with R. Because, for example, if we are launching the coin in a region R where the coin makes 50 complete revolutions while falling, then a 1% change in the initial angular velocity will just interchange heads and tails by the time the coin reaches the floor. Other things being equal (all dynamical properties of the coin involve heads and tails in the same manner), this should just reverse the final result. A change in the initial ‘orbital’ velocity of the coin, which results in a 1% change in the time of flight, should also do this (strictly speaking, these conclusions are only approximate, but we expect them to be highly accurate, and to become more so if the changes become less than 1%). Thus, if all other initial phase coordinates remain fixed, and we vary only the initial angular velocity θ˙ and upward velocity z˙ , the H and T domains will spread into thin ribbons, like the stripes on a zebra. From symmetry, the width of adjacent ribbons must be very nearly equal. This same ‘parallel ribbon’ shape of the H and T domains presumably holds also in the full phase space.4 This is quite reminiscent of Gibbs’ illustration of fine-grained and coarse-grained probability densities, in terms of the stirring of colored ink in water. On a sufficiently fine scale, every phase region is either H or T ; the probability for heads is either zero or unity. But on the scale of sizes of the ‘macroscopic’ region R corresponding to ordinary skills, the probability density is the coarse-grained one, which from symmetry must be very nearly 1/2 if we know that the coin is honest. What if we don’t consider all equal phase volumes within R as equally likely? Well, it doesn’t really matter if the H and T domains are sufficiently small. ‘Almost any’ probability density which is a smooth, continuous function within R, will give nearly equal weight to the H and T domains, and we will still have very nearly 1/2 for the probability for heads. This is an example of a general phenomenon, discussed by Poincar´e, that, in cases where small 4

Actually, if the coin is tossed onto a perfectly flat and homogeneous level floor, and is not only perfectly symmetrical under the reflection operation that interchanges heads and tails, but also perfectly round, the probability for heads is independent of five of the 12 coordinates, so we have this intricate structure only in a seven-dimensional space. Let the reader for whom this is a startling statement think about it hard, to see why symmetry makes five coordinates irrelevant (they are the two horizontal coordinates of its center of mass, the direction of its horizontal component of momentum, the Eulerian angle for rotation about a vertical axis, and the Eulerian angle for rotation about the axis of the coin).

334

Part 1 Principles and elementary applications

changes in initial conditions produce big changes in the final results, our final probability assignments will be, for all practical purposes, independent of the initial ones. As soon as we know that the coin has perfect dynamical symmetry between heads and tails – i.e., its Lagrangian function L(q1 , . . . , p6 ) = (kinetic energy) − (potential energy)

(10.4)

is invariant under the symmetry operation that interchanges heads and tails – then we know an exact result. No matter where in phase space the initial region R is located, for every H domain there is a T domain of equal size and identical shape, in which heads and tails are interchanged. Then if R is large enough to include both, we shall persist in assigning probability 1/2 to heads. Now suppose the coin is biased. The above argument is lost to us, and we expect that the phase volumes of H and T domains within R are no longer equal. In this case, the ‘frequentist’ tells us that there still exists a definite ‘objective’ frequency of heads, p H = 1/2, which is a measurable physical property of the coin. Let us understand clearly what this implies. To assert that the frequency of heads is a physical property only of the coin, is equivalent to asserting that the ratio v(H )/v(R) is independent of the location of region R. If this were true, it would be an utterly unprecedented new theorem of mechanics, with important implications for physics which extend far beyond coin tossing. Of course, no such thing is true. From the three specific methods of tossing the coin discussed in Section 10.3 which correspond to widely different locations of the region R, it is clear that the frequency of heads will depend very much on how the coin is tossed. Method A uses a region of phase space where the individual H and T domains are large compared with R, so human skill is able to control the result. Method B uses a region where, for a biased coin, the T domain is very much larger than either R or the H domain. Only method C uses a region where the H and T domains are small compared with R, making the result unpredictable from knowledge of R. It would be interesting to know how to calculate the ratio v(H )/v(R) as a function of the location of R from the laws of mechanics; but it appears to be a very difficult problem. Note, for example, that the coin cannot come to rest until its initial potential and kinetic energy have been either transferred to some other object or dissipated into heat by frictional forces; so all the details of how that happens must be taken into account. Of course, it would be quite feasible to do controlled experiments which measure this ratio in various regions of phase space. But it seems that the only person who would have any use for this information is a professional gambler. Clearly, our reason for assigning probability 1/2 to heads when the coin is honest is not based merely on observed frequencies. How many of us can cite a single experiment in which the frequency 1/2 was established under conditions we would accept as significant? Yet none of us hesitates a second in choosing the number 1/2. Our real reason is simply common sense recognition of the symmetry of the situation. Prior information which does not consist of frequencies is of decisive importance in determining probability assignments even in this simplest of all random experiments.

10 Physics of ‘random experiments’

335

Those who adhere publicly to a strict frequency interpretation of probability jump to such conclusions privately just as quickly and automatically as anyone else; but in so doing they have violated their basic premise that (probability) ≡ (frequency); and so in trying to justify this choice they must suppress any mention of symmetry, and fall back on remarks about assumed frequencies in random experiments which have, in fact, never been performed.5 Here is an example of what one loses by so doing. From the result of tossing a die, we cannot tell whether it is symmetrical or not. But if we know, from direct physical measurements, that the die is perfectly symmetrical and we accept the laws of mechanics as correct, then it is no longer plausible inference, but deductive reasoning, that tells us this: any nonuniformity in the frequencies of different faces is proof of a corresponding nonuniformity in the method of tossing. The qualitative nature of the conclusions we can draw from the random experiment depend on whether we do or do not know that the die is symmetrical. This reasoning power of arguments based on symmetry has led to great advances in physics for 60 years; as noted, it is not very exaggerated to say that the only known exact results in mathematical physics are the ones that can be deduced by the methods of group theory from symmetry considerations. Although this power is obvious once noted, and it is used intuitively by every worker in probability theory, it has not been widely recognized as a legitimate formal tool in probability theory.6 We have just seen that, in the simplest of random experiments, any attempt to define a probability merely as a frequency involves us in the most obvious logical difficulties as soon as we analyze the mechanism of the experiment. In many situations where we can recognize an element of symmetry, our intuition readily takes over and suggests an answer; and of course it is the same answer that our basic desideratum – that equivalent states of knowledge should be represented by equivalent probability assignments – requires for consistency. But situations in which we have positive knowledge of symmetry are rather special ones among all those faced by the scientist. How can we carry out consistent inductive reasoning in situations where we do not perceive any clear element of symmetry? This is an openended problem because there is no end to the variety of different special circumstances that might arise. As we shall see, the principle of maximum entropy gives a useful and versatile tool for many such problems. But in order to give a start toward understanding this, let’s go way back to the beginning and consider the tossing of the coin still another time, in a different way. 10.10 Independence of tosses ‘When I toss a coin, the probability for heads is one-half.’ What do we mean by this statement? Over the past two centuries, millions of words have been written about this simple question. A recent exchange (Edwards, 1991) shows that it is still enveloped in total 5

6

Or rather, whenever anyone has tried to perform such experiments under sufficiently controlled conditions to be significant, the expected equality of frequencies is not observed. The famous experiments of Weldon (E. S. Pearson, 1967; K. Pearson, 1980) and Wolf (Czuber, 1908) are discussed elsewhere in this book. Indeed, L. J. Savage (1962, p. 102) rejects symmetry arguments, thereby putting his system of ‘personalistic’ probability in the position of recognizing the need for prior probabilities, but refusing to admit any formal principles for assigning them.

336

Part 1 Principles and elementary applications

confusion in the minds of some. But, by and large, the issue is between the following two interpretations: (A) ‘The available information gives me no reason to expect heads rather than tails, or vice versa – I am completely unable to predict which it will be.’ (B) ‘If I toss the coin a very large number of times, in the long run heads will occur about half the time – in other words, the frequency of heads will approach 1/2.’

We belabor still another time, what we have already stressed many times before. Statement (A) does not describe any property of the coin, but only the robot’s state of knowledge (or, if you prefer, of ignorance). Statement (B) is, at least by implication, asserting something about the coin. Thus, (B) is a very much stronger statement than (A). Note, however, that (A) does not in any way contradict (B); on the contrary, (A) could be a consequence of (B). For if our robot were told that this coin has in the past given heads and tails with equal frequency, this would give it no help at all in predicting the result of the next toss. Why, then, has interpretation (A) been almost universally rejected by writers on probability and statistics for two generations? There are, we think, two reasons for this. In the first place, there is a widespread belief that if probability theory is to be of any use in applications, we must be able to interpret our calculations in the strong sense of (B). But this is simply untrue, as we have demonstrated throughout the preceding eight chapters. We have seen examples of almost all known applications of frequentist probability theory, and many useful problems outside the scope of frequentist probability theory, which are nevertheless solved readily by probability theory as logic. Secondly, it is another widely held misconception that the mathematical rules of probability theory (the ‘laws of large numbers’) would lead to (B) as a consequence of (A), and this seems to be ‘getting something for nothing’. For, the fact that I know nothing about the coin is clearly not enough to make the coin give heads and tails equally often! This misconception arises because of a failure to distinguish between the following two statements: (C) ‘Heads and tails are equally likely on a single toss.’ (D) ‘If the coin is tossed N times, each of the 2 N conceivable outcomes is equally likely.’

To see the difference between statements (C) and (D), consider a case where it is known that the coin is biased, but not whether the bias favors heads or tails. Then (C) is applicable but (D) is not. For, on this state of knowledge, as was noted already by Laplace, the sequences H H and T T are each somewhat more likely than H T or T H . More generally, our common sense tells us that any unknown influence which favors heads on one toss will likely favor heads on the other toss. Unless our robot has positive knowledge (symmetry of both the coin and the method of tossing) which definitely rules out all such possibilities, (D) is not a correct description of his true state of knowledge; it assumes too much. Statement (D) implies (C), but says a great deal more. Statement (C) says only, ‘I do not know enough about the situation to give me any help in predicting the result of any throw’, while (D) seems to be saying, ‘I know that the coin is honest, and that it is being tossed in

10 Physics of ‘random experiments’

337

a way which favors neither face over the other, and that the method of tossing and the wear of the coin give no tendency for the result of one toss to influence the result of another’. But probability theory is subtle; in Chapter 9 we met the poorly informed robot, who makes statement (D) without having any of that information. Mathematically, the laws of large numbers require much more than (C) for their derivation. Indeed, if we agree that tossing a coin generates an exchangeable sequence (i.e., the probability that N tosses will yield heads at n specified trials depends only on N and n, not on the order of heads and tails), then application of the de Finetti theorem, as in Chapter 9, shows that the weak law of large numbers holds only when (D) can be justified. In this case, it is almost correct to say that the probability assigned to heads is equal to the frequency with which the coin gives heads; because, for any → 0, the probability that the observed frequency f = (n/N ) lies in the interval (1/2 ± ) tends to unity as N → ∞. Let us describe this by saying that there exists a strong connection between probability and frequency. We analyze this more deeply in Chapter 18. In most recent treatments of probability theory, the writer is concerned with situations where a strong connection between probability and frequency is taken for granted – indeed, this is usually considered essential to the very notion of probability. Nevertheless, the existence of such a strong connection is clearly only an ideal limiting case, unlikely to be realized in any real application. For this reason, the laws of large numbers and limit theorems of probability theory can be grossly misleading to a scientist or engineer who na¨ıvely supposes them to be experimental facts, and tries to interpret them literally in his problems. Here are two simple examples. (1) Suppose there is some random experiment in which you assign a probability p for some particular outcome A. It is important to estimate accurately the fraction f of times A will be true in the next million trials. If you try to use the laws of large numbers, it will tell you various things about f ; for example, that it is quite likely to differ from p by less than one-tenth of 1%, and enormously unlikely to differ from p by more than 1%. But now imagine that, in the first 100 trials, the observed frequency of A turned out to be entirely different from p. Would this lead you to suspect that something was wrong, and would you revise your probability assignment for the 101st trial? If it would, then your state of knowledge is different from that required for the validity of the law of large numbers. You are not sure of the independence of different trials, and/or you are not sure of the correctness of the numerical value of p. Your prediction of f for one million trials is probably no more reliable than for 100. (2) The common sense of a good experimental scientist tells him the same thing without any probability theory. Suppose someone is measuring the velocity of light. After making allowances for the known systematic errors, he could calculate a probability distribution for the various other errors, based on the noise level in his electronics, vibration amplitudes, etc. At this point, a na¨ıve application of the law of large numbers might lead him to think that he can add three significant figures to his measurement merely by repeating it one million times and averaging the results. But, of course, what he would actually do is to repeat some unknown systematic error one million times. It is idle to repeat a physical measurement an enormous number of times in the hope that ‘good statistics’ will average out your errors, because we cannot know the full systematic error. This is the old ‘Emperor of China’ fallacy, discussed in Chapter 8.

338

Part 1 Principles and elementary applications

Indeed, unless we know that all sources of systematic error – recognized or unrecognized – contribute less than about one-third the total error, we cannot be sure that the average of one million measurements is any more reliable than the average of ten. Our time is much better spent in designing a new experiment which will give a lower probable error per trial. As Poincar´e put it, ‘The physicist is persuaded that one good measurement is worth many bad ones’. In other words, the common sense of a scientist tells him that the probabilities he assigns to various errors do not have a strong connection with frequencies, and that methods of inference which presuppose such a connection could be disastrously misleading in his problems. Then, in advanced applications, it will behoove us to consider: How are our final conclusions altered if we depart from the universal custom of orthodox statistics, and relax the assumption of strong connections? Harold Jeffreys showed a very easy way to answer this, as we shall see later. As common sense tells us it must be, the ultimate accuracy of our conclusions is then determined not by anything in the data or in the orthodox picture of things, but rather by our own state of knowledge about the systematic errors. Of course, the orthodoxian will protest that, ‘We understand this perfectly well; and in our analysis we assume that systematic errors have been located and eliminated’. But he does not tell us how to do this, or what to do if – as is the case in virtually every real experiment – they are unknown and so cannot be eliminated. Then all the usual ‘asymptotic’ rules are qualitatively wrong, and only probability theory as logic can give defensible conclusions. 10.11 The arrogance of the uninformed Now we come to a very subtle and important point, which has caused trouble from the start in the use of probability theory. Many of the objections to Laplace’s viewpoint which you find in the literature can be traced to the author’s failure to recognize it. Suppose we do not know whether a coin is honest, and we fail to notice that this state of ignorance allows the possibility of unknown influences which would tend to favor the same face on all tosses. We say, ‘Well, I don’t see any reason why any one of the 2 N outcomes in N tosses should be more likely than any other, so I’ll assign uniform probabilities by the principle of indifference’. We would be led to statement (D) and the resulting strong connection between probability and frequency. But this is absurd – in this state of uncertainty, we could not possibly make reliable predictions of the frequency of heads. Statement (D), which is supposed to represent a great deal of positive knowledge about the coin and the method of tossing, can also result from failure to make proper use of all the available information! In other applications of mathematics, if we fail to use all of the relevant data of a problem, the result will not be that we get an incorrect answer. The result will be that we are unable to get any answer at all. But probability theory cannot have any such built-in safety device, because, in principle, the theory must be able to operate no matter what our incomplete information might be. If we fail to include all of the relevant data, or to take into account all the possibilities allowed by the data and prior information, probability theory will still give us a definite answer; and that

10 Physics of ‘random experiments’

339

answer will be the correct conclusion from the information that we actually gave the robot. But that answer may be in violent contradiction to our common sense judgments which did take everything into account, if only crudely. The onus is always on the user to make sure that all the information, which his common sense tells him is relevant to the problem, is actually incorporated into the equations, and that the full extent of his ignorance is also properly represented. If you fail to do this, then you should not blame Bayes and Laplace for your nonsensical answers. We shall see examples of this kind of misuse of probability theory later, in the various objections to the rule of succession. It may seem paradoxical that a more careful analysis of a problem may lead to less certainty in prediction of the frequency of heads. However, look at it this way. It is commonplace that in all kinds of questions the fool feels a certainty that is denied to the wise man. The semiliterate on the next bar stool will tell you with absolute, arrogant assurance just how to solve all the world’s problems; while the scholar who has spent a lifetime studying their causes is not at all sure how to do this. Indeed, we have seen just this phenomenon in Chapter 9, in the scenario of the poorly informed robot, who arrogantly asserts all the limit theorems of frequentist probability theory out of its ignorance rather than its knowledge. In almost any example of inference, a more careful study of the situation, uncovering new facts, can lead us to feel either more certain or less certain about our conclusions, depending on what we have learned. New facts may support our previous conclusions, or they may refute them; we saw some of the subtleties of this in Chapter 5. If our mathematical model of reasoning failed to reproduce this phenomenon, it could not be an adequate ‘calculus of inductive reasoning’.

Part 2 Advanced applications

11 Discrete prior probabilities: the entropy principle

At this point, we return to the job of designing the robot. We have part of its brain designed, and we have seen how it would reason in a few simple problems of hypothesis testing and estimation. In every problem it has solved thus far, the results have either amounted to the same thing as, or were usually demonstrably superior to, those offered in the ‘orthodox’ statistical literature. But it is still not a very versatile reasoning machine, because it has only one means by which it can translate raw information into numerical values of probabilities, the principle of indifference (2.95). Consistency requires it to recognize the relevance of prior information, and so in almost every problem it is faced at the onset with the problem of assigning initial probabilities, whether they are called technically prior probabilities or sampling probabilities. It can use indifference for this if it can break the situation up into mutually exclusive, exhaustive possibilities in such a way that no one of them is preferred to any other by the evidence. But often there will be prior information that does not change the set of possibilities but does give a reason for preferring one possibility to another. What do we do in this case? Orthodoxy evades this problem by simply ignoring prior information for fixed parameters, and maintaining the fiction that sampling probabilities are known frequencies. Yet, in some 40 years of active work in this field, the writer has never seen a real problem in which one actually has prior information about sampling frequencies! In practice, sampling probabilities are always assigned from some standard theoretical model (binomial distribution, etc.) which starts from the principle of indifference. If the robot is to rise above such false pretenses, we must give it more principles for assigning initial probabilities by logical analysis of the prior information. In this chapter and the following one we introduce two new principles of this kind, each of which has an unlimited range of useful applications. But the field is open-ended in all directions; we expect that more principles will be found in the future, leading to a still wider range of applications. 11.1 A new kind of prior information Imagine a class of problems in which the robot’s prior information consists of average values of certain things. Suppose, for example, that statistics were collected in a recent earthquake and that, out of 100 windows broken, there were 976 pieces found. But we are 343

344

Part 2 Advanced applications

not given the numbers 100 and 976; we are told only that ‘the average window is broken into m = 9.76 pieces’. Given only that information, what is the probability that a window would be broken into exactly m pieces? There is nothing in the theory so far that will answer that question. As another example, suppose we have a table covered with black cloth, and some dice, but, for reasons that will be clear in a minute, they are black dice with white spots. A die is tossed onto the black table. Above there is a camera. Every time the die is tossed, we take a snapshot. The camera will record only the white spots. Now we don’t change the film in between, so we end up with a multiple exposure; uniform blackening of the film after we have done this a few thousand times. From the known density of dots and the number of tosses, we can infer the average number of spots which were on top, but not the frequencies with which various faces came up. Suppose that the average number of spots turned out to be 4.5 instead of 3.5. Given only this information (i.e., not making use of anything else that you or I might know about dice except that they have six faces), what estimates should the robot make of the frequencies with which n spots came up? Supposing that successive tosses form an exchangeable sequence as defined in Chapter 3, what probability should it assign to the nth face coming up on the next toss? As a third example, suppose that we have a string of N = 1000 cars, bumper to bumper, and that they occupy the full length of L = 3 miles. As they drive onto a rather large ferry boat, the distance that it sinks into the water determines their total weight W . But the numbers N , L , W are withheld from us; we are told only their average length L/N and average weight W/N . We can look up statistics from the manufacturers, and find out how long the Volkswagen is, how heavy it is, how long a Cadillac is, and how heavy it is, and so on, for all the other brands. From knowledge only of the average length and the average weight of these cars, what can we then infer about the proportion of cars of each make that were in the cluster? If we knew the numbers N , L, W , then this could be solved by direct application of Bayes’ theorem; without that information, we could still introduce the unknowns N , L, W as nuisance parameters and use Bayes’ theorem, eliminating them at the end. We shall give an example of this procedure in the nonconglomerability problem in Chapter 15. However, the Bayesian solution would not really address our problem; it only transfers it to the problem of assigning priors to N , L, W , leaving us back in essentially the same situation; how do we assign informative probabilities? Now, it is not at all obvious how our robot should handle problems of this sort. Actually, we have defined two different problems; estimating a frequency distribution, and assigning a probability distribution. But in an exchangeable sequence these are almost identical mathematically. So let’s think about how we would want the robot to behave in this situation. Of course, we want it to take into account fully all the information it has, of whatever kind. But we would not want it to jump to conclusions that are not warranted by the evidence it has. We have seen that a uniform probability assignment represents a state of mind completely noncommittal with regard to all possibilities; it favors no one over any other, and thus leaves the entire decision to the subsequent data which the robot may receive. The knowledge of

11 Discrete prior probabilities: the entropy principle

345

average values does give the robot a reason for preferring some possibilities to others, but we would like it to assign a probability distribution which is as uniform as it can be while agreeing with the available information. The most conservative, noncommittal distribution is the one which is as ‘spread-out’ as possible. In particular, the robot must not ignore any possibility – it must not assign zero probability to any situation unless its information really rules out that situation. This sounds very much like defining a variational problem; the information available defines constraints fixing some properties of the initial probability distribution, but not all of them. The ambiguity remaining is to be resolved by the policy of honesty; frankly acknowledging the full extent of its ignorance by taking into account all possibilities allowed by its knowledge.1 To cast it into mathematical form, the aim of avoiding unwarranted conclusions leads us to ask whether there is some reasonable numerical measure of how uniform a probability distribution is, which the robot could maximize subject to constraints which represent its available information. Let’s approach this in the way most problems are solved: the time-honored method of trial and error. We just have to invent some measures of uncertainty, and put them to the test to see what they give us. One measure of how broad an initial distribution is would be its variance. Would it make sense if the robot were to assign probabilities so as to maximize the variance subject to its information? Consider the distribution of maximum variance for a given m, if the conceivable values of m are essentially unlimited, as in the broken window problem. Then the maximum variance solution would be the one where the robot assigns a very large probability for no breakage at all, and an enormously small probability of a window to be broken into billions and billions of pieces. You can get an arbitrarily high variance this way, while keeping the average at 9.76. In the dice problem, the solution with maximum variance would be to assign all the probability to the one and the six, in such a way that p1 + 6 p6 = 4.5, or p1 = 0.3, p6 = 0.7. So that, evidently, is not the way we would want our robot to behave; it would be jumping to wildly unjustified conclusions, since nothing in its information says that it is impossible to have spots two through five up.

11.2 Minimum

pi2

Another kind of measure of how spread out a probability distribution is, which has been used a great deal in statistics, is the sum of the squares of the probabilities assigned to each of the possibilities. The distribution which minimizes this expression, subject to constraints represented by average values, might be a reasonable way for our robot to behave. Let’s see what sort of a solution this would lead to. We want to make pm2 (11.1) m

1

This is really an ancient principle of wisdom, recognized clearly already in such sources as Herodotus and the Old Testament.

346

Part 2 Advanced applications

a minimum, subject to the constraints that the sum of all pm shall be unity and the average over the distribution is m. A formal solution is obtained at once from the variational problem pm2 − λ mpm − µ pm = (2 pm − λm − µ)δpm = 0, (11.2) δ m

m

m

m

where λ and µ are Lagrange multipliers. So pm will be a linear function of m: 2 pm − λm − µ = 0. Then µ and λ are found from pm = 1, (11.3) m

and

mpm = m,

(11.4)

m

where m is the average value of m, given to us in the statement of the problem. Suppose that m can take on only the values 1, 2, and 3. Then the formal solution is p1 =

4 m − , 3 2

p2 =

1 , 3

p3 =

2 m − . 2 3

(11.5)

This would be at least usable for some values of m. But, in principle, m could be anywhere in 1 ≤ m ≤ 3, and p1 becomes negative when m > 8/3 = 2.667, while p3 becomes negative 2 pi lacks the property of when m < 4/3 = 1.333. The formal solution for minimum non-negativity. We might try to patch this up in an ad hoc way by replacing the negative values by zero and adjusting the other probabilities to keep the constraint satisfied. But then the robot is using different principles of reasoning in different ranges of m; and it is still assigning zero probability to situations that are not ruled out by its information. This performance is not acceptable; it is an improvement over maximum variance, but the robot is still behaving inconsistently and jumping to unwarranted conclusions. We have taken the trouble to examine this criterion because some writers have rejected the entropy solution given next and suggested on intuitive grounds, without examining the actual results, that 2 minimum pi would be a more reasonable criterion. But the idea behind the variational approach still looks like a good one. There should be some consistent measure of the uniformity, or ‘amount of uncertainty’, of a probability distribution which we can maximize, subject to constraints, and which will have the property that forces the robot to be completely honest about what it knows, and in particular it does not permit the robot to draw any conclusions unless those conclusions are really justified by the evidence it has.

11.3 Entropy: Shannon’s theorem At this stage, we turn to the most quoted theorem in Shannon’s work on information theory (Shannon, 1948). If there exists a consistent measure of the ‘amount of uncertainty’

11 Discrete prior probabilities: the entropy principle

347

represented by a probability distribution, there are certain conditions it will have to satisfy. We shall state them in a way which will remind you of the arguments we gave in Chapter 2; in fact, this is really a continuation of the basic development of probability theory. (1) We assume that some numerical measure Hn ( p1 , . . . , pn ) exists; i.e., that it is possible to set up some kind of association between ‘amount of uncertainty’ and real numbers. (2) We assume a continuity property: Hn is a continuous function of the pi . Otherwise, an arbitrarily small change in the probability distribution would lead to a big change in the amount of uncertainty. (3) We require that this measure should correspond qualitatively to common sense in that, when there are many possibilities, we are more uncertain than when there are few. This condition takes the form that in the case that the pi are all equal, the quantity h(n) = Hn

1 1 1 , ,..., n n n

(11.6)

is a monotonic increasing function of n. This establishes the ‘sense of direction’. (4) We require that the measure Hn be consistent in the same sense as before; i.e., if there is more than one way of working out its value, we must get the same answer for every possible way.

Previously, our conditions of consistency took the form of the functional equations (2.13) and (2.45). Now we have instead a hierarchy of functional equations relating the different Hn to each other. Suppose the robot perceives two alternatives, to which it assigns probabilities p1 and q ≡ 1 − p1 . Then the ‘amount of uncertainty’ represented by this distribution is H2 ( p1 , q). But now the robot learns that the second alternative really consists of two possibilities, and it assigns probabilities p2 , p3 to them, satisfying p2 + p3 = q. What is now the robot’s full uncertainty H3 ( p1 , p2 , p3 ) as to all three possibilities? Well, the process of choosing one of the three can be broken down into two steps. Firstly, decide whether the first possibility is or is not true; the uncertainty removed by this decision is the original H2 ( p1 , q). Then, with probability q, the robot encounters an additional uncertainty as to events 2, 3, leading to H3 ( p1 , p2 , p3 ) = H2 ( p1 , q) + q H2

p2 p3 , q q

(11.7)

as the condition that we shall obtain the same net uncertainty for either method of calculation. In general, a function Hn can be broken down in many different ways, relating it to the lower order functions by a large number of equations like this. Note that (11.7) says rather more than our previous functional equations did. It says not only that the Hn are consistent in the aforementioned sense, but also that they are to be additive. So this is really an additional assumption which we should have included in our list.

348

Part 2 Advanced applications

Exercise 11.1. It seems intuitively that the most general condition of consistency would be a functional equation which is satisfied by any monotonic increasing function of Hn . But this is ambiguous unless we say something about how the monotonic functions for different n are to be related; is it possible to invoke the same function for all n? Carry out some new research in this field by investigating this matter; try either to find a possible form of the new functional equations, or to explain why this cannot be done.

At any rate, the next step is perfectly straightforward mathematics; let’s see the full proof of Shannon’s theorem, now dropping the unnecessary subscript on Hn . We find the most general form of the composition law (11.7) for the case that there are n mutually exclusive propositions (A1 , . . . , An ), to which we assign probabilities ( p1 , . . . , pn ). Instead of giving the probabilities for the (A1 , . . . , An ) directly, we might group the first k of them together as the proposition (A1 + A2 + · · · + Ak ) and assign probability w1 = ( p1 + · · · + pk ); then the next m propositions are grouped into (Ak+1 + · · · + Ak+m ), to which we assign probability w2 = ( pk+1 + · · · + pk+m ), etc. The amount of uncertainty as to the composite propositions is H (w1 , . . . , wr ). Next we give the conditional probabilities ( p1 /w1 , . . . , pk /w1 ) for the propositions (A1 , . . . , Ak ), given that the composite proposition (A1 + · · · + Ak ) is true. The additional uncertainty, encountered with probability w1 , is then H ( p1 /w1 , . . . , pk /wk ). Carrying this out for the composite propositions (Ak+1 + · · · + Ak+m ), etc., we arrive ultimately at the same state of knowledge as if the ( p1 , . . . , pn ) had been given directly; so consistency requires that these calculations yield the same ultimate uncertainty, no matter how the choices were broken down. Thus we have

p1 pk ,..., H ( p1 , . . . , pn ) = H (w1 , . . . , wr ) + w1 H w1 w1 (11.8)

pk+1 pk+m ,..., + ···, + w2 H w2 w2 which is the general form of the functional equation (11.7). For example,

2 1 1 1 1 1 1 1 , , , , =H + H . H 2 3 6 2 2 2 3 3

(11.9)

Since H ( p1 , . . . , pn ) is to be continuous, it will suffice to determine it for all rational values ni pi = ni

(11.10)

with n i integers. But then (11.8) determines the function H already in terms of the quantities h(n) ≡ H (1/n, 1/n, . . . , 1/n) which measure the ‘amount of uncertainty’ for the case of n equally likely alternatives. For we can regard a choice of one of the alternatives (A1 , . . . , An )

11 Discrete prior probabilities: the entropy principle

349

as the first step in the choice of one of n

ni

(11.11)

i=1

equally likely alternatives in the manner just described, the second step of which is also a choice between n i equally likely alternatives. As an example, with n = 3, we might choose n 1 = 3, n 2 = 4, n 3 = 2. For this case the composition law (11.8) becomes

4 2 3 3 4 2 , , (11.12) h(9) = H + h(3) + h(4) + h(2). 9 9 9 9 9 9 For a general choice of the n i , (11.8) reduces to pi h(n i ). h n i = H ( p1 , . . . , pn ) +

(11.13)

i

Now we can choose all n i = m; whereupon (11.13) collapses to h(mn) = h(m) + h(n).

(11.14)

Evidently, this is solved by setting h(n) = K log(n),

(11.15)

where K is a constant. But is this solution unique? If m, n were continuous variables, this would be easy to answer; differentiate with respect to m, set m = 1, and integrate the resulting differential equation with the initial condition h(1) = 0 evident from (11.14), and you have proved that (11.15) is the only solution. But in our case, (11.14) need hold only for integer values of m, n; and this elevates the problem from a trivial one of analysis to an interesting little exercise in number theory. Firstly, note that (11.15) is no longer unique; in fact, (11.14) has an infinite number of solutions for integer m, n. Each positive integer N has a unique decomposition into prime factors; and so, by repeated application of (11.14), we can express h(N ) in the form i m i h(qi ), where qi are the prime numbers and m i are the non-negative integers. Thus we can specify h(qi ) arbitrarily for the prime numbers qi , whereupon (11.14) is just sufficient to determine h(N ) for all positive integers. To get any unique solution for h(n), we have to add our qualitative requirement that h(n) be monotonic increasing in n. To show this, note first that (11.14) may be extended by induction: h(nmr · · ·) = h(n) + h(m) + h(r ) + · · · ,

(11.16)

and setting the factors equal in the kth order extension gives h(n k ) = kh(n).

(11.17)

350

Part 2 Advanced applications

Now let t, s be any two integers not less than 2. Then, for arbitrarily large n, we can find an integer m such that log(t) m+1 m ≤ < , n log(s) n

s m ≤ t n < s m+1 .

or

(11.18)

Since h is monotonic increasing, h(s m ) ≤ h(t n ) ≤ h(s m+1 ); or, from (11.17), mh(s) ≤ nh(t) ≤ (m + 1)h(s),

(11.19)

h(t) m+1 m ≤ ≤ . n h(s) n

(11.20)

which can be written as

Comparing (11.18) and (11.20), we see that ' ' ' h(t) log(t) '' 1 ' or ' h(s) − log(s) ' ≤ n ,

' ' ' h(t) h(s) '' ' ' log(t) − log(s) ' ≤ ,

(11.21)

where ≡

h(s) n log(t)

(11.22)

is arbitrarily small. Thus h(t)/ log(t) must be a constant, and the uniqueness of (11.15) is proved. Now, different choices of K in (11.15) amount to the same thing as taking logarithms to different bases; so if we leave the base arbitrary for the moment, we can just as well write h(n) = log(n). Substituting this into (11.13), we have Shannon’s theorem: The only function H ( p1 , . . . , pn ) satisfying the conditions we have imposed on a reasonable measure of ‘amount of uncertainty’ is H ( p1 , . . . , pn ) = −

n

pi log( pi ).

(11.23)

i=1

Accepting this interpretation, it follows that the distribution ( p1 , . . . , pn ) which maximizes (11.23), subject to constraints imposed by the available information, will represent the ‘most honest’ description of what the robot knows about the propositions (A1 , . . . , An ). The only arbitrariness is that we have the option of taking the logarithm to any base we please, corresponding to a multiplicative constant in H . This, of course, has no effect on the values of ( p1 , . . . , pn ) which maximize H . As in Chapter 2, we note the logic of what has and has not been proved. We have shown that use of the measure (11.23) is a necessary condition for consistency; but, in accordance with G¨odel’s theorem, one cannot prove that it actually is consistent unless we move out into some as yet unknown region beyond that used in our proof. From the above argument, given originally in Jaynes (1957a) and leaning heavily on Shannon, we conjectured that any other choice of ‘information measure’ will lead to inconsistencies if carried far enough; and a direct proof of this was found subsequently by Shore and Johnson (1980) using

11 Discrete prior probabilities: the entropy principle

351

an argument entirely independent of ours. Many years of use of the maximum entropy principle (variously abbreviated to PME, MEM, MENT, MAXENT by various writers) has not revealed any inconsistency; and of course we do not believe that one will ever be found. The function H is called the entropy, or, better, the information entropy of the distribution { pi }. This is an unfortunate terminology, which now seems impossible to correct. We must warn at the outset that the major occupational disease of this field is a persistent failure to distinguish between the information entropy, which is a property of any probability distribution, and the experimental entropy of thermodynamics, which is instead a property of a thermodynamic state as defined, for example by such observed quantities as pressure, volume, temperature, magnetization, of some physical system. They should never have been called by the same name; the experimental entropy makes no reference to any probability distribution, and the information entropy makes no reference to thermodynamics.2 Many textbooks and research papers are flawed fatally by the author’s failure to distinguish between these entirely different things, and in consequence proving nonsense theorems. We have seen the mathematical expression p log( p) appearing incidentally in several previous chapters, generally in connection with the multinomial distribution; now it has acquired a new meaning as a fundamental measure of how uniform a probability distribution is.

Exercise 11.2. Prove that any change in the direction of equalizing two probabilities will increase the information entropy. That is, if pi < p j , then the change pi → pi + , p j → p j − , where is infinitesimal and positive, will increase H ( p1 , . . . , pn ) by an amount proportional to . Applying this repeatedly, it follows that the maximum attainable entropy is one for which all the differences | pi − p j | are as small as possible. This shows also that information entropy is a global property, not a local one; a difference | pi − p j | has just as great an effect on entropy whether |i − j| is 1 or 1000.

Although the above demonstration appears satisfactory mathematically, it is not yet in completely satisfactory form conceptually. The functional equation (11.7) does not seem quite so intuitively compelling as our previous ones did. In this case, the trouble is probably that we have not yet learned how to verbalize the argument leading to (11.7) in a fully convincing manner. Perhaps this will inspire others to try their hand at improving the verbiage that we used just before writing (11.7). Then it is comforting to know that there are several other possible arguments, like the aforementioned one of Shore and Johnson, which also lead uniquely to the same conclusion (11.23). We note another of them. 11.4 The Wallis derivation This resulted from a suggestion made to the writer in 1962 by Graham Wallis (although the argument we give differs slightly from his). We are given information I , which is to be used 2

But in case the problem happens to be one of thermodynamics, there is a relation between them, which we shall find presently.

352

Part 2 Advanced applications

in assigning probabilities { p1 , . . . , pm } to m different possibilities. We have a total amount of probability m

pi = 1

(11.24)

i=1

to allocate among them. Now, in judging the reasonableness of any particular allocation, we are limited to consideration of I and the rules of probability theory; to call upon any other evidence would be to admit that we had not used all the available information in the first place. The problem can also be stated as follows. Choose some integer n m, and imagine that we have n little ‘quanta’ of probability, each of magnitude δ = n −1 , to distribute in any way we see fit. In order to ensure that we have a ‘fair’ allocation, in the sense that none of the m possibilities shall knowingly be given either more or fewer of these quanta than it ‘deserves’, in the light of the information I , we might proceed as follows. Suppose we were to scatter these quanta at random among the m choices – you can make this a blindfolded penny-pitching game into m equal boxes if you like. If we simply toss these ‘quanta’ of probability at random, so that each box has an equal probability of getting them, nobody can claim that any box is being unfairly favored over any other. If we do this, and the first box receives exactly n 1 quanta, and the second n 2 , etc., we will say that the random experiment has generated the probability assignment pi = n i δ =

ni , n

i = 1, 2, . . . , m.

(11.25)

The probability that this will happen is the multinomial distribution m −n

n! . n1! · · · nm !

(11.26)

Now imagine that a blindfolded friend repeatedly scatters the n quanta at random among the m boxes. Each time he does this we examine the resulting probability assignment. If it happens to conform to the information I , we accept it; otherwise we reject it and tell him to try again. We continue until some probability assignment { p1 , . . . , pm } is accepted. What is the most likely probability distribution to result from this game? From (11.26) it is the one which maximizes W =

n! n1! · · · nm !

(11.27)

subject to whatever constraints are imposed by the information I . We can refine this procedure by choosing smaller quanta; i.e. large n. In this limit we have, by the Stirling approximation,

√ 1 1 +O , (11.28) log(n!) = n log(n) − n + 2πn + 12n n2

11 Discrete prior probabilities: the entropy principle

353

where O(1/n 2 ) denotes terms that tend to zero as n → ∞, as (1/n 2 ) or faster. Using this result, and writing n i = npi , we find easily that as n → ∞, n i → ∞, in such a way that n i /n → pi = const., m 1 log(W ) → − pi log( pi ) = H ( p1 , . . . , pm ), n i=1

(11.29)

and, so, the most likely probability assignment to result from this game is just the one that has maximum entropy subject to the given information I . You might object that this game is still not entirely ‘fair’, because we have stopped at the first acceptable result without seeing what other acceptable ones might also have turned up. In order to remove this objection, we can consider all possible acceptable distributions and choose the average pi of them. But here the ‘laws of large numbers’ come to our rescue. We leave it as an exercise for the reader to prove that in the limit of large n, the overwhelming majority of all acceptable probability allocations that can be produced in this game are arbitrarily close to the maximum entropy distribution.3 From a conceptual standpoint, the Wallis derivation is quite attractive. It is entirely independent of Shannon’s functional equations (11.8); it does not require any postulates about connections between probability and frequency; nor does it suppose that the different possibilities {1, . . . , m} are themselves the result of any repeatable random experiment. Furthermore, it leads automatically to the prescription that H is to be maximized – and not treated in some other way – without the need for any quasi-philosophical interpretation of H in terms of such a vague notion as ‘amount of uncertainty’. Anyone who accepts the proposed game as a fair way to allocate probabilities that are not determined by the prior information is thereby led inexorably to the maximum entropy principle. Let us stress this point. It is a big mistake to try to read too much philosophical significance into theorems which lead to (11.23). In particular, the association of the word ‘information’ with entropy expressions seems in retrospect quite unfortunate, because it persists in carrying the wrong connotations to so many people. Shannon himself, with prophetic insight into the reception his work would get, tried to play it down by pointing out immediately after stating the theorem that it was in no way necessary for the theory to follow. By this he meant that the inequalities which H satisfies are already quite sufficient to justify its use; it does not really need the further support of the theorem, which deduces it from functional equations expressing intuitively the properties of ‘amount of uncertainty’. However, while granting that this is perfectly true, we would like now to show that if we do accept the expression for entropy, very literally, as the correct expression for the ‘amount of uncertainty’ represented by a probability distribution, this will lead us to a much more unified picture of probability theory in general. It will enable us to see that the principle of indifference, and many frequency connections of probability, are special cases

3

This result is formalized more completely in the entropy concentration theorem given later.

354

Part 2 Advanced applications

of a single principle, and that statistical mechanics, communication theory, and a mass of other applications are all instances of a single method of reasoning. 11.5 An example Let’s test this principle by seeing how it would work on the example discussed above, in which m can take on only the values 1, 2, 3, and m is given. We can use our Lagrange multiplier argument again to solve this problem; as in (11.2), 3 3 3 ∂H mpm − µ pm = − λm − µ δpm = 0. (11.30) δ H −λ ∂ pm m=1 m=1 m=1 Now, ∂H = − log( pm ) − 1, ∂ pm

(11.31)

pm = exp {−λ0 − λm} ,

(11.32)

so our solution is

where λ0 ≡ µ + 1. So the distribution which has maximum entropy, subject to a given average value, will be in exponential form, and we have to fit the constants λ0 and λ by forcing this to agree with the constraints that the sum of the p’s must be one and the expectation value must be equal to the average m that we assigned. This is accomplished quite neatly if we define a function Z (λ) ≡

3

exp{−λm},

(11.33)

m=1

which we called the partition function in Chapter 9. The equations (11.3) and (11.4) which fix our Lagrange multipliers take the form λ0 = log Z (λ), ∂ log Z (λ) . ∂λ We find that p1 (m), p2 (m), p3 (m) are given in parametric form by m=−

exp{−kλ} exp{−λ} + exp{−2λ} + exp{−3λ} exp (3 − k)λ , k = 1, 2, 3; = exp{2λ} + exp{λ} + 1

(11.34) (11.35)

pk =

m=

exp{2λ} + 2 exp{λ} + 3 . exp{2λ} + exp{λ} + 1

(11.36)

(11.37)

11 Discrete prior probabilities: the entropy principle

355

In a more complicated problem, we would just have to leave it in parametric form, but in this particular case we can eliminate the parameter λ algebraically, leading to the explicit solution 3 − m − p2 , 2 1 4 − 3(m − 2)2 − 1 , p2 = 3 m − 1 − p2 . p3 = 2 p1 =

(11.38)

As a function of m, p2 is the arc of an ellipse which comes in with unit slope at the end points. p1 and p3 are also arcs of ellipses, but slanted one way and the other. We have finally arrived here at a solution which meets the objections we had to the first two criteria. The maximum entropy distribution (11.36) has automatically the property pk ≥ 0 because the logarithm has a singularity at zero which we could never get past. It has, furthermore, the property that it never allows the robot to assign zero probability to any possibility unless the evidence forces that probability to be zero.4 The only place where a probability goes to zero is in the limit where m is exactly one or exactly three. But of course, in those limits, some probabilities did have to be zero by deductive reasoning, whatever principle we invoked.

11.6 Generalization: a more rigorous proof The maximum entropy solution can be generalized in many ways. Suppose a variable x can take on n different discrete values (x1 , . . . , xn ), which correspond to the n different propositions (A1 , . . . , An ); and that there are m different functions of x, f k (x),

1 ≤ k ≤ m < n,

(11.39)

and that we want them to have expectations f k (x) = Fk ,

1 ≤ k ≤ m,

(11.40)

where the {Fk } are numbers given to us in the statement of the problem. What probabilities ( p1 , . . . , pn ) will the robot assign to the possibilities (x1 , . . . , xn )? We shall have Fk = f k (x) =

n

pi f k (xi ),

(11.41)

i=1

and, to find the set of pi ’s which has maximum entropy subject to all these constraints simultaneously, we introduce as many Lagrange multipliers as there are 4

This property was stressed by David Blackwell, who considered it the most fundamental requirement of a rational procedure for assigning probabilities.

356

Part 2 Advanced applications

constraints:

0 = δ H − (λ0 − 1)

pi −

m

i

=

∂ H i

∂ pi

λj

− (λ0 − 1) −

pi f j (xi )

i

j=1 m

λ j f j (xi ) δpi .

(11.42)

j=1

So from (11.23) our solution is the following: m λ j f j (xi ) , pi = exp −λ0 −

(11.43)

j=1

as always, exponential in the constraints. The sum of all probabilities has to be unity, so m pi = exp{−λ0 } exp − λ j f j (xi ) . (11.44) 1= i

i

j=1

If we now define the partition function Z (λ1 · · · λm ) ≡

n

m exp − λ j f j (xi ) ,

i=1

(11.45)

j=1

then (11.44) reduces to λ0 = log Z (λ1 , . . . , λm ).

(11.46)

The average value Fk must be equal to the expected value of f x (x) over the probability distribution m f k (xi ) exp − λ j f j (xi ) , (11.47) Fk = exp{−λ0 } i

j=1

or Fk = −

∂ log Z (λ1 , . . . , λm ) . ∂λk

(11.48)

The maximum value of the entropy is n pi log( pi ) Hmax = −

,

(11.49)

max

i=1

and from (11.43) we find that Hmax = λ0 +

m

λ j Fj .

(11.50)

j=1

Now, these results open up so many new applications that it is important to have as rigorous a proof as possible. But to solve a maximization problem by variational means, as we just did, is not 100% rigorous. Our Lagrange multiplier argument has the nice feature that it

11 Discrete prior probabilities: the entropy principle

357

gives us the answer instantaneously. It has the bad feature that after we done it, we’re not quite sure it is the answer. Suppose we wanted to locate the maximum of a function whose absolute maximum happened to occur at a cusp (discontinuity of slope) instead at a rounded top. Variational methods will locate some subsidiary rounded maxima, but they will not find the cusp. Even after we’ve proved that we have the highest value that can be reached by variational methods, it is possible that the function reaches a still higher value at some cusp that we can’t locate by variational methods. There would always be a little grain of doubt remaining if we do only the variational problem. So now we give an entirely different derivation which is strong just where the variational argument is weak. For this we need a lemma. Let pi be any set of numbers which could be a possible probability distribution; in other words, n

pi = 1,

pi ≥ 0,

(11.51)

i=1

and let u i be another possible probability distribution, n

u i = 1,

u i ≥ 0.

(11.52)

0 ≤ x < ∞,

(11.53)

i=1

Now, log(x) ≤ (x − 1), with equality if and only if x = 1. Therefore,

n

ui pi log pi

i=1

≤

n

pi

i=1

ui − 1 = 0, pi

(11.54)

or H ( p 1 , . . . , pn ) ≤

n i=1

pi log

1 ui

,

(11.55)

with equality if and only if pi = u i , i = 1, . . . , n. This is the lemma we need. Now we simply pull a distribution u i out of the hat; ui ≡

m 1 exp − λ j f j (xi ) , Z (λ1 , . . . , λm ) j=1

(11.56)

where Z (λ1 , . . . , λm ) is defined by (11.45). Never mind why we chose u i this particular way; we’ll see why in a minute. We can now write the inequality (11.55) as H≤

n i=1

m pi log Z (λ1 , . . . , λm ) + λ j f j (xi ) j=1

(11.57)

358

Part 2 Advanced applications

or H ≤ log Z (λ1 , . . . , λm ) +

m

) ( λ j f j (x) .

(11.58)

j=1

Now let the pi vary over the class of all possible probability distributions that satisfy the constraints (11.41). The right-hand side of (11.58) stays constant. Our lemma now says that H attains its absolute maximum Hmax , making (11.58) an equality, if and only if the pi are chosen as the canonical distribution (11.56). This is the rigorous proof, which is independent of the things that might happen if we try to do it as a variational problem. This argument is, as we see, strong just where the variational argument is weak. On the other hand, this argument is weak where the variational argument is strong, because we just had to pull the answer out of a hat in writing (11.56). We had to know the answer before we could prove it. If you have both arguments side by side, then you have the whole story.

11.7 Formal properties of maximum entropy distributions Now we want to list the formal properties of the canonical distribution (11.56). This is a bad way to proceed in one sense because it all sounds very abstract and we don’t see the connections to real problems. On the other hand, we get all the things we need a lot faster if we first become aware of all the formal properties that are in the theory; and then later go into specific physical problems and see that every one of these formal relations has many different useful meanings, depending on the particular problem. The maximum attainable H that we can obtain by holding these averages fixed depends, of course, on the average values we specified, Hmax = S(F1 , . . . , Fm ) = log Z (λ1 , . . . , λm ) +

m

λk Fk .

(11.59)

k=1

We can regard H as a measure of the ‘amount of the uncertainty’ in any probability distribution. After we have maximized it, it becomes a function of the definite data of the problem {Fi }, and we’ll call this maximum S(F1 , . . . , Fm ) with a view to the original application in physics. It is still a measure of ‘uncertainty’, but it is uncertainty when all the information we have consists of just these numbers. It is completely ‘objective’ in the sense that it depends only on the given data of the problem, and not on anybody’s p